| /* $Id: cosa.h,v 1.6 1999/01/06 14:02:44 kas Exp $ */ | |
| /* | |
| * Copyright (C) 1995-1997 Jan "Yenya" Kasprzak <kas@fi.muni.cz> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #ifndef COSA_H__ | |
| #define COSA_H__ | |
| #include <linux/ioctl.h> | |
| #ifdef __KERNEL__ | |
| /* status register - output bits */ | |
| #define SR_RX_DMA_ENA 0x04 /* receiver DMA enable bit */ | |
| #define SR_TX_DMA_ENA 0x08 /* transmitter DMA enable bit */ | |
| #define SR_RST 0x10 /* SRP reset */ | |
| #define SR_USR_INT_ENA 0x20 /* user interrupt enable bit */ | |
| #define SR_TX_INT_ENA 0x40 /* transmitter interrupt enable bit */ | |
| #define SR_RX_INT_ENA 0x80 /* receiver interrupt enable bit */ | |
| /* status register - input bits */ | |
| #define SR_USR_RQ 0x20 /* user interrupt request pending */ | |
| #define SR_TX_RDY 0x40 /* transmitter empty (ready) */ | |
| #define SR_RX_RDY 0x80 /* receiver data ready */ | |
| #define SR_UP_REQUEST 0x02 /* request from SRP to transfer data | |
| up to PC */ | |
| #define SR_DOWN_REQUEST 0x01 /* SRP is able to transfer data down | |
| from PC to SRP */ | |
| #define SR_END_OF_TRANSFER 0x03 /* SRP signalize end of | |
| transfer (up or down) */ | |
| #define SR_CMD_FROM_SRP_MASK 0x03 /* mask to get SRP command */ | |
| /* bits in driver status byte definitions : */ | |
| #define SR_RDY_RCV 0x01 /* ready to receive packet */ | |
| #define SR_RDY_SND 0x02 /* ready to send packet */ | |
| #define SR_CMD_PND 0x04 /* command pending */ /* not currently used */ | |
| /* ???? */ | |
| #define SR_PKT_UP 0x01 /* transfer of packet up in progress */ | |
| #define SR_PKT_DOWN 0x02 /* transfer of packet down in progress */ | |
| #endif /* __KERNEL__ */ | |
| #define SR_LOAD_ADDR 0x4400 /* SRP microcode load address */ | |
| #define SR_START_ADDR 0x4400 /* SRP microcode start address */ | |
| #define COSA_LOAD_ADDR 0x400 /* SRP microcode load address */ | |
| #define COSA_MAX_FIRMWARE_SIZE 0x10000 | |
| /* ioctls */ | |
| struct cosa_download { | |
| int addr, len; | |
| char __user *code; | |
| }; | |
| /* Reset the device */ | |
| #define COSAIORSET _IO('C',0xf0) | |
| /* Start microcode at given address */ | |
| #define COSAIOSTRT _IOW('C',0xf1, int) | |
| /* Read the block from the device memory */ | |
| #define COSAIORMEM _IOWR('C',0xf2, struct cosa_download *) | |
| /* actually the struct cosa_download itself; this is to keep | |
| * the ioctl number same as in 2.4 in order to keep the user-space | |
| * utils compatible. */ | |
| /* Write the block to the device memory (i.e. download the microcode) */ | |
| #define COSAIODOWNLD _IOW('C',0xf2, struct cosa_download *) | |
| /* actually the struct cosa_download itself; this is to keep | |
| * the ioctl number same as in 2.4 in order to keep the user-space | |
| * utils compatible. */ | |
| /* Read the device type (one of "srp", "cosa", and "cosa8" for now) */ | |
| #define COSAIORTYPE _IOR('C',0xf3, char *) | |
| /* Read the device identification string */ | |
| #define COSAIORIDSTR _IOR('C',0xf4, char *) | |
| /* Maximum length of the identification string. */ | |
| #define COSA_MAX_ID_STRING 128 | |
| /* Increment/decrement the module usage count :-) */ | |
| /* #define COSAIOMINC _IO('C',0xf5) */ | |
| /* #define COSAIOMDEC _IO('C',0xf6) */ | |
| /* Get the total number of cards installed */ | |
| #define COSAIONRCARDS _IO('C',0xf7) | |
| /* Get the number of channels on this card */ | |
| #define COSAIONRCHANS _IO('C',0xf8) | |
| /* Set the driver for the bus-master operations */ | |
| #define COSAIOBMSET _IOW('C', 0xf9, unsigned short) | |
| #define COSA_BM_OFF 0 /* Bus-mastering off - use ISA DMA (default) */ | |
| #define COSA_BM_ON 1 /* Bus-mastering on - faster but untested */ | |
| /* Gets the busmaster status */ | |
| #define COSAIOBMGET _IO('C', 0xfa) | |
| #endif /* !COSA_H__ */ |