| /* | |
| * Microchip switch driver main logic | |
| * | |
| * Copyright (C) 2017 | |
| * | |
| * Permission to use, copy, modify, and/or distribute this software for any | |
| * purpose with or without fee is hereby granted, provided that the above | |
| * copyright notice and this permission notice appear in all copies. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES | |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR | |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES | |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN | |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF | |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. | |
| */ | |
| #include <linux/delay.h> | |
| #include <linux/export.h> | |
| #include <linux/gpio.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/platform_data/microchip-ksz.h> | |
| #include <linux/phy.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/if_bridge.h> | |
| #include <net/dsa.h> | |
| #include <net/switchdev.h> | |
| #include "ksz_priv.h" | |
| static const struct { | |
| int index; | |
| char string[ETH_GSTRING_LEN]; | |
| } mib_names[TOTAL_SWITCH_COUNTER_NUM] = { | |
| { 0x00, "rx_hi" }, | |
| { 0x01, "rx_undersize" }, | |
| { 0x02, "rx_fragments" }, | |
| { 0x03, "rx_oversize" }, | |
| { 0x04, "rx_jabbers" }, | |
| { 0x05, "rx_symbol_err" }, | |
| { 0x06, "rx_crc_err" }, | |
| { 0x07, "rx_align_err" }, | |
| { 0x08, "rx_mac_ctrl" }, | |
| { 0x09, "rx_pause" }, | |
| { 0x0A, "rx_bcast" }, | |
| { 0x0B, "rx_mcast" }, | |
| { 0x0C, "rx_ucast" }, | |
| { 0x0D, "rx_64_or_less" }, | |
| { 0x0E, "rx_65_127" }, | |
| { 0x0F, "rx_128_255" }, | |
| { 0x10, "rx_256_511" }, | |
| { 0x11, "rx_512_1023" }, | |
| { 0x12, "rx_1024_1522" }, | |
| { 0x13, "rx_1523_2000" }, | |
| { 0x14, "rx_2001" }, | |
| { 0x15, "tx_hi" }, | |
| { 0x16, "tx_late_col" }, | |
| { 0x17, "tx_pause" }, | |
| { 0x18, "tx_bcast" }, | |
| { 0x19, "tx_mcast" }, | |
| { 0x1A, "tx_ucast" }, | |
| { 0x1B, "tx_deferred" }, | |
| { 0x1C, "tx_total_col" }, | |
| { 0x1D, "tx_exc_col" }, | |
| { 0x1E, "tx_single_col" }, | |
| { 0x1F, "tx_mult_col" }, | |
| { 0x80, "rx_total" }, | |
| { 0x81, "tx_total" }, | |
| { 0x82, "rx_discards" }, | |
| { 0x83, "tx_discards" }, | |
| }; | |
| static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) | |
| { | |
| u8 data; | |
| ksz_read8(dev, addr, &data); | |
| if (set) | |
| data |= bits; | |
| else | |
| data &= ~bits; | |
| ksz_write8(dev, addr, data); | |
| } | |
| static void ksz_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set) | |
| { | |
| u32 data; | |
| ksz_read32(dev, addr, &data); | |
| if (set) | |
| data |= bits; | |
| else | |
| data &= ~bits; | |
| ksz_write32(dev, addr, data); | |
| } | |
| static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits, | |
| bool set) | |
| { | |
| u32 addr; | |
| u8 data; | |
| addr = PORT_CTRL_ADDR(port, offset); | |
| ksz_read8(dev, addr, &data); | |
| if (set) | |
| data |= bits; | |
| else | |
| data &= ~bits; | |
| ksz_write8(dev, addr, data); | |
| } | |
| static void ksz_port_cfg32(struct ksz_device *dev, int port, int offset, | |
| u32 bits, bool set) | |
| { | |
| u32 addr; | |
| u32 data; | |
| addr = PORT_CTRL_ADDR(port, offset); | |
| ksz_read32(dev, addr, &data); | |
| if (set) | |
| data |= bits; | |
| else | |
| data &= ~bits; | |
| ksz_write32(dev, addr, data); | |
| } | |
| static int wait_vlan_ctrl_ready(struct ksz_device *dev, u32 waiton, int timeout) | |
| { | |
| u8 data; | |
| do { | |
| ksz_read8(dev, REG_SW_VLAN_CTRL, &data); | |
| if (!(data & waiton)) | |
| break; | |
| usleep_range(1, 10); | |
| } while (timeout-- > 0); | |
| if (timeout <= 0) | |
| return -ETIMEDOUT; | |
| return 0; | |
| } | |
| static int get_vlan_table(struct dsa_switch *ds, u16 vid, u32 *vlan_table) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| int ret; | |
| mutex_lock(&dev->vlan_mutex); | |
| ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M); | |
| ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START); | |
| /* wait to be cleared */ | |
| ret = wait_vlan_ctrl_ready(dev, VLAN_START, 1000); | |
| if (ret < 0) { | |
| dev_dbg(dev->dev, "Failed to read vlan table\n"); | |
| goto exit; | |
| } | |
| ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]); | |
| ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]); | |
| ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]); | |
| ksz_write8(dev, REG_SW_VLAN_CTRL, 0); | |
| exit: | |
| mutex_unlock(&dev->vlan_mutex); | |
| return ret; | |
| } | |
| static int set_vlan_table(struct dsa_switch *ds, u16 vid, u32 *vlan_table) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| int ret; | |
| mutex_lock(&dev->vlan_mutex); | |
| ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]); | |
| ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]); | |
| ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]); | |
| ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M); | |
| ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE); | |
| /* wait to be cleared */ | |
| ret = wait_vlan_ctrl_ready(dev, VLAN_START, 1000); | |
| if (ret < 0) { | |
| dev_dbg(dev->dev, "Failed to write vlan table\n"); | |
| goto exit; | |
| } | |
| ksz_write8(dev, REG_SW_VLAN_CTRL, 0); | |
| /* update vlan cache table */ | |
| dev->vlan_cache[vid].table[0] = vlan_table[0]; | |
| dev->vlan_cache[vid].table[1] = vlan_table[1]; | |
| dev->vlan_cache[vid].table[2] = vlan_table[2]; | |
| exit: | |
| mutex_unlock(&dev->vlan_mutex); | |
| return ret; | |
| } | |
| static void read_table(struct dsa_switch *ds, u32 *table) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]); | |
| ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]); | |
| ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]); | |
| ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]); | |
| } | |
| static void write_table(struct dsa_switch *ds, u32 *table) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]); | |
| ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]); | |
| ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]); | |
| ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]); | |
| } | |
| static int wait_alu_ready(struct ksz_device *dev, u32 waiton, int timeout) | |
| { | |
| u32 data; | |
| do { | |
| ksz_read32(dev, REG_SW_ALU_CTRL__4, &data); | |
| if (!(data & waiton)) | |
| break; | |
| usleep_range(1, 10); | |
| } while (timeout-- > 0); | |
| if (timeout <= 0) | |
| return -ETIMEDOUT; | |
| return 0; | |
| } | |
| static int wait_alu_sta_ready(struct ksz_device *dev, u32 waiton, int timeout) | |
| { | |
| u32 data; | |
| do { | |
| ksz_read32(dev, REG_SW_ALU_STAT_CTRL__4, &data); | |
| if (!(data & waiton)) | |
| break; | |
| usleep_range(1, 10); | |
| } while (timeout-- > 0); | |
| if (timeout <= 0) | |
| return -ETIMEDOUT; | |
| return 0; | |
| } | |
| static int ksz_reset_switch(struct dsa_switch *ds) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| u8 data8; | |
| u16 data16; | |
| u32 data32; | |
| /* reset switch */ | |
| ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true); | |
| /* turn off SPI DO Edge select */ | |
| ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8); | |
| data8 &= ~SPI_AUTO_EDGE_DETECTION; | |
| ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8); | |
| /* default configuration */ | |
| ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8); | |
| data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING | | |
| SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE; | |
| ksz_write8(dev, REG_SW_LUE_CTRL_1, data8); | |
| /* disable interrupts */ | |
| ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK); | |
| ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F); | |
| ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32); | |
| /* set broadcast storm protection 10% rate */ | |
| ksz_read16(dev, REG_SW_MAC_CTRL_2, &data16); | |
| data16 &= ~BROADCAST_STORM_RATE; | |
| data16 |= (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100; | |
| ksz_write16(dev, REG_SW_MAC_CTRL_2, data16); | |
| return 0; | |
| } | |
| static void port_setup(struct ksz_device *dev, int port, bool cpu_port) | |
| { | |
| u8 data8; | |
| u16 data16; | |
| /* enable tag tail for host port */ | |
| if (cpu_port) | |
| ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE, | |
| true); | |
| ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false); | |
| /* set back pressure */ | |
| ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true); | |
| /* set flow control */ | |
| ksz_port_cfg(dev, port, REG_PORT_CTRL_0, | |
| PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, true); | |
| /* enable broadcast storm limit */ | |
| ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true); | |
| /* disable DiffServ priority */ | |
| ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false); | |
| /* replace priority */ | |
| ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING, | |
| false); | |
| ksz_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4, | |
| MTI_PVID_REPLACE, false); | |
| /* enable 802.1p priority */ | |
| ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true); | |
| /* configure MAC to 1G & RGMII mode */ | |
| ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8); | |
| data8 |= PORT_RGMII_ID_EG_ENABLE; | |
| data8 &= ~PORT_MII_NOT_1GBIT; | |
| data8 &= ~PORT_MII_SEL_M; | |
| data8 |= PORT_RGMII_SEL; | |
| ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8); | |
| /* clear pending interrupts */ | |
| ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16); | |
| } | |
| static void ksz_config_cpu_port(struct dsa_switch *ds) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| int i; | |
| ds->num_ports = dev->port_cnt; | |
| for (i = 0; i < ds->num_ports; i++) { | |
| if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) { | |
| dev->cpu_port = i; | |
| /* enable cpu port */ | |
| port_setup(dev, i, true); | |
| } | |
| } | |
| } | |
| static int ksz_setup(struct dsa_switch *ds) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| int ret = 0; | |
| dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table), | |
| dev->num_vlans, GFP_KERNEL); | |
| if (!dev->vlan_cache) | |
| return -ENOMEM; | |
| ret = ksz_reset_switch(ds); | |
| if (ret) { | |
| dev_err(ds->dev, "failed to reset switch\n"); | |
| return ret; | |
| } | |
| /* accept packet up to 2000bytes */ | |
| ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true); | |
| ksz_config_cpu_port(ds); | |
| ksz_cfg(dev, REG_SW_MAC_CTRL_1, MULTICAST_STORM_DISABLE, true); | |
| /* queue based egress rate limit */ | |
| ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true); | |
| /* start switch */ | |
| ksz_cfg(dev, REG_SW_OPERATION, SW_START, true); | |
| return 0; | |
| } | |
| static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds, | |
| int port) | |
| { | |
| return DSA_TAG_PROTO_KSZ; | |
| } | |
| static int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| u16 val = 0; | |
| ksz_pread16(dev, addr, 0x100 + (reg << 1), &val); | |
| return val; | |
| } | |
| static int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val); | |
| return 0; | |
| } | |
| static int ksz_enable_port(struct dsa_switch *ds, int port, | |
| struct phy_device *phy) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| /* setup slave port */ | |
| port_setup(dev, port, false); | |
| return 0; | |
| } | |
| static void ksz_disable_port(struct dsa_switch *ds, int port, | |
| struct phy_device *phy) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| /* there is no port disable */ | |
| ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, true); | |
| } | |
| static int ksz_sset_count(struct dsa_switch *ds, int port, int sset) | |
| { | |
| if (sset != ETH_SS_STATS) | |
| return 0; | |
| return TOTAL_SWITCH_COUNTER_NUM; | |
| } | |
| static void ksz_get_strings(struct dsa_switch *ds, int port, | |
| u32 stringset, uint8_t *buf) | |
| { | |
| int i; | |
| if (stringset != ETH_SS_STATS) | |
| return; | |
| for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) { | |
| memcpy(buf + i * ETH_GSTRING_LEN, mib_names[i].string, | |
| ETH_GSTRING_LEN); | |
| } | |
| } | |
| static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port, | |
| uint64_t *buf) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| int i; | |
| u32 data; | |
| int timeout; | |
| mutex_lock(&dev->stats_mutex); | |
| for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) { | |
| data = MIB_COUNTER_READ; | |
| data |= ((mib_names[i].index & 0xFF) << MIB_COUNTER_INDEX_S); | |
| ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data); | |
| timeout = 1000; | |
| do { | |
| ksz_pread32(dev, port, REG_PORT_MIB_CTRL_STAT__4, | |
| &data); | |
| usleep_range(1, 10); | |
| if (!(data & MIB_COUNTER_READ)) | |
| break; | |
| } while (timeout-- > 0); | |
| /* failed to read MIB. get out of loop */ | |
| if (!timeout) { | |
| dev_dbg(dev->dev, "Failed to get MIB\n"); | |
| break; | |
| } | |
| /* count resets upon read */ | |
| ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data); | |
| dev->mib_value[i] += (uint64_t)data; | |
| buf[i] = dev->mib_value[i]; | |
| } | |
| mutex_unlock(&dev->stats_mutex); | |
| } | |
| static void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| u8 data; | |
| ksz_pread8(dev, port, P_STP_CTRL, &data); | |
| data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE); | |
| switch (state) { | |
| case BR_STATE_DISABLED: | |
| data |= PORT_LEARN_DISABLE; | |
| break; | |
| case BR_STATE_LISTENING: | |
| data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE); | |
| break; | |
| case BR_STATE_LEARNING: | |
| data |= PORT_RX_ENABLE; | |
| break; | |
| case BR_STATE_FORWARDING: | |
| data |= (PORT_TX_ENABLE | PORT_RX_ENABLE); | |
| break; | |
| case BR_STATE_BLOCKING: | |
| data |= PORT_LEARN_DISABLE; | |
| break; | |
| default: | |
| dev_err(ds->dev, "invalid STP state: %d\n", state); | |
| return; | |
| } | |
| ksz_pwrite8(dev, port, P_STP_CTRL, data); | |
| } | |
| static void ksz_port_fast_age(struct dsa_switch *ds, int port) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| u8 data8; | |
| ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8); | |
| data8 |= SW_FAST_AGING; | |
| ksz_write8(dev, REG_SW_LUE_CTRL_1, data8); | |
| data8 &= ~SW_FAST_AGING; | |
| ksz_write8(dev, REG_SW_LUE_CTRL_1, data8); | |
| } | |
| static int ksz_port_vlan_filtering(struct dsa_switch *ds, int port, bool flag) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| if (flag) { | |
| ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, | |
| PORT_VLAN_LOOKUP_VID_0, true); | |
| ksz_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, true); | |
| ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true); | |
| } else { | |
| ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false); | |
| ksz_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, false); | |
| ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, | |
| PORT_VLAN_LOOKUP_VID_0, false); | |
| } | |
| return 0; | |
| } | |
| static int ksz_port_vlan_prepare(struct dsa_switch *ds, int port, | |
| const struct switchdev_obj_port_vlan *vlan) | |
| { | |
| /* nothing needed */ | |
| return 0; | |
| } | |
| static void ksz_port_vlan_add(struct dsa_switch *ds, int port, | |
| const struct switchdev_obj_port_vlan *vlan) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| u32 vlan_table[3]; | |
| u16 vid; | |
| bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; | |
| for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { | |
| if (get_vlan_table(ds, vid, vlan_table)) { | |
| dev_dbg(dev->dev, "Failed to get vlan table\n"); | |
| return; | |
| } | |
| vlan_table[0] = VLAN_VALID | (vid & VLAN_FID_M); | |
| if (untagged) | |
| vlan_table[1] |= BIT(port); | |
| else | |
| vlan_table[1] &= ~BIT(port); | |
| vlan_table[1] &= ~(BIT(dev->cpu_port)); | |
| vlan_table[2] |= BIT(port) | BIT(dev->cpu_port); | |
| if (set_vlan_table(ds, vid, vlan_table)) { | |
| dev_dbg(dev->dev, "Failed to set vlan table\n"); | |
| return; | |
| } | |
| /* change PVID */ | |
| if (vlan->flags & BRIDGE_VLAN_INFO_PVID) | |
| ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vid); | |
| } | |
| } | |
| static int ksz_port_vlan_del(struct dsa_switch *ds, int port, | |
| const struct switchdev_obj_port_vlan *vlan) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; | |
| u32 vlan_table[3]; | |
| u16 vid; | |
| u16 pvid; | |
| ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid); | |
| pvid = pvid & 0xFFF; | |
| for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) { | |
| if (get_vlan_table(ds, vid, vlan_table)) { | |
| dev_dbg(dev->dev, "Failed to get vlan table\n"); | |
| return -ETIMEDOUT; | |
| } | |
| vlan_table[2] &= ~BIT(port); | |
| if (pvid == vid) | |
| pvid = 1; | |
| if (untagged) | |
| vlan_table[1] &= ~BIT(port); | |
| if (set_vlan_table(ds, vid, vlan_table)) { | |
| dev_dbg(dev->dev, "Failed to set vlan table\n"); | |
| return -ETIMEDOUT; | |
| } | |
| } | |
| ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid); | |
| return 0; | |
| } | |
| struct alu_struct { | |
| /* entry 1 */ | |
| u8 is_static:1; | |
| u8 is_src_filter:1; | |
| u8 is_dst_filter:1; | |
| u8 prio_age:3; | |
| u32 _reserv_0_1:23; | |
| u8 mstp:3; | |
| /* entry 2 */ | |
| u8 is_override:1; | |
| u8 is_use_fid:1; | |
| u32 _reserv_1_1:23; | |
| u8 port_forward:7; | |
| /* entry 3 & 4*/ | |
| u32 _reserv_2_1:9; | |
| u8 fid:7; | |
| u8 mac[ETH_ALEN]; | |
| }; | |
| static int ksz_port_fdb_add(struct dsa_switch *ds, int port, | |
| const unsigned char *addr, u16 vid) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| u32 alu_table[4]; | |
| u32 data; | |
| int ret = 0; | |
| mutex_lock(&dev->alu_mutex); | |
| /* find any entry with mac & vid */ | |
| data = vid << ALU_FID_INDEX_S; | |
| data |= ((addr[0] << 8) | addr[1]); | |
| ksz_write32(dev, REG_SW_ALU_INDEX_0, data); | |
| data = ((addr[2] << 24) | (addr[3] << 16)); | |
| data |= ((addr[4] << 8) | addr[5]); | |
| ksz_write32(dev, REG_SW_ALU_INDEX_1, data); | |
| /* start read operation */ | |
| ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START); | |
| /* wait to be finished */ | |
| ret = wait_alu_ready(dev, ALU_START, 1000); | |
| if (ret < 0) { | |
| dev_dbg(dev->dev, "Failed to read ALU\n"); | |
| goto exit; | |
| } | |
| /* read ALU entry */ | |
| read_table(ds, alu_table); | |
| /* update ALU entry */ | |
| alu_table[0] = ALU_V_STATIC_VALID; | |
| alu_table[1] |= BIT(port); | |
| if (vid) | |
| alu_table[1] |= ALU_V_USE_FID; | |
| alu_table[2] = (vid << ALU_V_FID_S); | |
| alu_table[2] |= ((addr[0] << 8) | addr[1]); | |
| alu_table[3] = ((addr[2] << 24) | (addr[3] << 16)); | |
| alu_table[3] |= ((addr[4] << 8) | addr[5]); | |
| write_table(ds, alu_table); | |
| ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START); | |
| /* wait to be finished */ | |
| ret = wait_alu_ready(dev, ALU_START, 1000); | |
| if (ret < 0) | |
| dev_dbg(dev->dev, "Failed to write ALU\n"); | |
| exit: | |
| mutex_unlock(&dev->alu_mutex); | |
| return ret; | |
| } | |
| static int ksz_port_fdb_del(struct dsa_switch *ds, int port, | |
| const unsigned char *addr, u16 vid) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| u32 alu_table[4]; | |
| u32 data; | |
| int ret = 0; | |
| mutex_lock(&dev->alu_mutex); | |
| /* read any entry with mac & vid */ | |
| data = vid << ALU_FID_INDEX_S; | |
| data |= ((addr[0] << 8) | addr[1]); | |
| ksz_write32(dev, REG_SW_ALU_INDEX_0, data); | |
| data = ((addr[2] << 24) | (addr[3] << 16)); | |
| data |= ((addr[4] << 8) | addr[5]); | |
| ksz_write32(dev, REG_SW_ALU_INDEX_1, data); | |
| /* start read operation */ | |
| ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START); | |
| /* wait to be finished */ | |
| ret = wait_alu_ready(dev, ALU_START, 1000); | |
| if (ret < 0) { | |
| dev_dbg(dev->dev, "Failed to read ALU\n"); | |
| goto exit; | |
| } | |
| ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]); | |
| if (alu_table[0] & ALU_V_STATIC_VALID) { | |
| ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]); | |
| ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]); | |
| ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]); | |
| /* clear forwarding port */ | |
| alu_table[2] &= ~BIT(port); | |
| /* if there is no port to forward, clear table */ | |
| if ((alu_table[2] & ALU_V_PORT_MAP) == 0) { | |
| alu_table[0] = 0; | |
| alu_table[1] = 0; | |
| alu_table[2] = 0; | |
| alu_table[3] = 0; | |
| } | |
| } else { | |
| alu_table[0] = 0; | |
| alu_table[1] = 0; | |
| alu_table[2] = 0; | |
| alu_table[3] = 0; | |
| } | |
| write_table(ds, alu_table); | |
| ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START); | |
| /* wait to be finished */ | |
| ret = wait_alu_ready(dev, ALU_START, 1000); | |
| if (ret < 0) | |
| dev_dbg(dev->dev, "Failed to write ALU\n"); | |
| exit: | |
| mutex_unlock(&dev->alu_mutex); | |
| return ret; | |
| } | |
| static void convert_alu(struct alu_struct *alu, u32 *alu_table) | |
| { | |
| alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID); | |
| alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER); | |
| alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER); | |
| alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) & | |
| ALU_V_PRIO_AGE_CNT_M; | |
| alu->mstp = alu_table[0] & ALU_V_MSTP_M; | |
| alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE); | |
| alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID); | |
| alu->port_forward = alu_table[1] & ALU_V_PORT_MAP; | |
| alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M; | |
| alu->mac[0] = (alu_table[2] >> 8) & 0xFF; | |
| alu->mac[1] = alu_table[2] & 0xFF; | |
| alu->mac[2] = (alu_table[3] >> 24) & 0xFF; | |
| alu->mac[3] = (alu_table[3] >> 16) & 0xFF; | |
| alu->mac[4] = (alu_table[3] >> 8) & 0xFF; | |
| alu->mac[5] = alu_table[3] & 0xFF; | |
| } | |
| static int ksz_port_fdb_dump(struct dsa_switch *ds, int port, | |
| dsa_fdb_dump_cb_t *cb, void *data) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| int ret = 0; | |
| u32 ksz_data; | |
| u32 alu_table[4]; | |
| struct alu_struct alu; | |
| int timeout; | |
| mutex_lock(&dev->alu_mutex); | |
| /* start ALU search */ | |
| ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH); | |
| do { | |
| timeout = 1000; | |
| do { | |
| ksz_read32(dev, REG_SW_ALU_CTRL__4, &ksz_data); | |
| if ((ksz_data & ALU_VALID) || !(ksz_data & ALU_START)) | |
| break; | |
| usleep_range(1, 10); | |
| } while (timeout-- > 0); | |
| if (!timeout) { | |
| dev_dbg(dev->dev, "Failed to search ALU\n"); | |
| ret = -ETIMEDOUT; | |
| goto exit; | |
| } | |
| /* read ALU table */ | |
| read_table(ds, alu_table); | |
| convert_alu(&alu, alu_table); | |
| if (alu.port_forward & BIT(port)) { | |
| ret = cb(alu.mac, alu.fid, alu.is_static, data); | |
| if (ret) | |
| goto exit; | |
| } | |
| } while (ksz_data & ALU_START); | |
| exit: | |
| /* stop ALU search */ | |
| ksz_write32(dev, REG_SW_ALU_CTRL__4, 0); | |
| mutex_unlock(&dev->alu_mutex); | |
| return ret; | |
| } | |
| static int ksz_port_mdb_prepare(struct dsa_switch *ds, int port, | |
| const struct switchdev_obj_port_mdb *mdb) | |
| { | |
| /* nothing to do */ | |
| return 0; | |
| } | |
| static void ksz_port_mdb_add(struct dsa_switch *ds, int port, | |
| const struct switchdev_obj_port_mdb *mdb) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| u32 static_table[4]; | |
| u32 data; | |
| int index; | |
| u32 mac_hi, mac_lo; | |
| mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]); | |
| mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16)); | |
| mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]); | |
| mutex_lock(&dev->alu_mutex); | |
| for (index = 0; index < dev->num_statics; index++) { | |
| /* find empty slot first */ | |
| data = (index << ALU_STAT_INDEX_S) | | |
| ALU_STAT_READ | ALU_STAT_START; | |
| ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); | |
| /* wait to be finished */ | |
| if (wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0) { | |
| dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); | |
| goto exit; | |
| } | |
| /* read ALU static table */ | |
| read_table(ds, static_table); | |
| if (static_table[0] & ALU_V_STATIC_VALID) { | |
| /* check this has same vid & mac address */ | |
| if (((static_table[2] >> ALU_V_FID_S) == (mdb->vid)) && | |
| ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) && | |
| (static_table[3] == mac_lo)) { | |
| /* found matching one */ | |
| break; | |
| } | |
| } else { | |
| /* found empty one */ | |
| break; | |
| } | |
| } | |
| /* no available entry */ | |
| if (index == dev->num_statics) | |
| goto exit; | |
| /* add entry */ | |
| static_table[0] = ALU_V_STATIC_VALID; | |
| static_table[1] |= BIT(port); | |
| if (mdb->vid) | |
| static_table[1] |= ALU_V_USE_FID; | |
| static_table[2] = (mdb->vid << ALU_V_FID_S); | |
| static_table[2] |= mac_hi; | |
| static_table[3] = mac_lo; | |
| write_table(ds, static_table); | |
| data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START; | |
| ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); | |
| /* wait to be finished */ | |
| if (wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0) | |
| dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); | |
| exit: | |
| mutex_unlock(&dev->alu_mutex); | |
| } | |
| static int ksz_port_mdb_del(struct dsa_switch *ds, int port, | |
| const struct switchdev_obj_port_mdb *mdb) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| u32 static_table[4]; | |
| u32 data; | |
| int index; | |
| int ret = 0; | |
| u32 mac_hi, mac_lo; | |
| mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]); | |
| mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16)); | |
| mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]); | |
| mutex_lock(&dev->alu_mutex); | |
| for (index = 0; index < dev->num_statics; index++) { | |
| /* find empty slot first */ | |
| data = (index << ALU_STAT_INDEX_S) | | |
| ALU_STAT_READ | ALU_STAT_START; | |
| ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); | |
| /* wait to be finished */ | |
| ret = wait_alu_sta_ready(dev, ALU_STAT_START, 1000); | |
| if (ret < 0) { | |
| dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); | |
| goto exit; | |
| } | |
| /* read ALU static table */ | |
| read_table(ds, static_table); | |
| if (static_table[0] & ALU_V_STATIC_VALID) { | |
| /* check this has same vid & mac address */ | |
| if (((static_table[2] >> ALU_V_FID_S) == (mdb->vid)) && | |
| ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) && | |
| (static_table[3] == mac_lo)) { | |
| /* found matching one */ | |
| break; | |
| } | |
| } | |
| } | |
| /* no available entry */ | |
| if (index == dev->num_statics) { | |
| ret = -EINVAL; | |
| goto exit; | |
| } | |
| /* clear port */ | |
| static_table[1] &= ~BIT(port); | |
| if ((static_table[1] & ALU_V_PORT_MAP) == 0) { | |
| /* delete entry */ | |
| static_table[0] = 0; | |
| static_table[1] = 0; | |
| static_table[2] = 0; | |
| static_table[3] = 0; | |
| } | |
| write_table(ds, static_table); | |
| data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START; | |
| ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); | |
| /* wait to be finished */ | |
| ret = wait_alu_sta_ready(dev, ALU_STAT_START, 1000); | |
| if (ret < 0) | |
| dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); | |
| exit: | |
| mutex_unlock(&dev->alu_mutex); | |
| return ret; | |
| } | |
| static int ksz_port_mirror_add(struct dsa_switch *ds, int port, | |
| struct dsa_mall_mirror_tc_entry *mirror, | |
| bool ingress) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| if (ingress) | |
| ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true); | |
| else | |
| ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true); | |
| ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false); | |
| /* configure mirror port */ | |
| ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, | |
| PORT_MIRROR_SNIFFER, true); | |
| ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false); | |
| return 0; | |
| } | |
| static void ksz_port_mirror_del(struct dsa_switch *ds, int port, | |
| struct dsa_mall_mirror_tc_entry *mirror) | |
| { | |
| struct ksz_device *dev = ds->priv; | |
| u8 data; | |
| if (mirror->ingress) | |
| ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false); | |
| else | |
| ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false); | |
| ksz_pread8(dev, port, P_MIRROR_CTRL, &data); | |
| if (!(data & (PORT_MIRROR_RX | PORT_MIRROR_TX))) | |
| ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, | |
| PORT_MIRROR_SNIFFER, false); | |
| } | |
| static const struct dsa_switch_ops ksz_switch_ops = { | |
| .get_tag_protocol = ksz_get_tag_protocol, | |
| .setup = ksz_setup, | |
| .phy_read = ksz_phy_read16, | |
| .phy_write = ksz_phy_write16, | |
| .port_enable = ksz_enable_port, | |
| .port_disable = ksz_disable_port, | |
| .get_strings = ksz_get_strings, | |
| .get_ethtool_stats = ksz_get_ethtool_stats, | |
| .get_sset_count = ksz_sset_count, | |
| .port_stp_state_set = ksz_port_stp_state_set, | |
| .port_fast_age = ksz_port_fast_age, | |
| .port_vlan_filtering = ksz_port_vlan_filtering, | |
| .port_vlan_prepare = ksz_port_vlan_prepare, | |
| .port_vlan_add = ksz_port_vlan_add, | |
| .port_vlan_del = ksz_port_vlan_del, | |
| .port_fdb_dump = ksz_port_fdb_dump, | |
| .port_fdb_add = ksz_port_fdb_add, | |
| .port_fdb_del = ksz_port_fdb_del, | |
| .port_mdb_prepare = ksz_port_mdb_prepare, | |
| .port_mdb_add = ksz_port_mdb_add, | |
| .port_mdb_del = ksz_port_mdb_del, | |
| .port_mirror_add = ksz_port_mirror_add, | |
| .port_mirror_del = ksz_port_mirror_del, | |
| }; | |
| struct ksz_chip_data { | |
| u32 chip_id; | |
| const char *dev_name; | |
| int num_vlans; | |
| int num_alus; | |
| int num_statics; | |
| int cpu_ports; | |
| int port_cnt; | |
| }; | |
| static const struct ksz_chip_data ksz_switch_chips[] = { | |
| { | |
| .chip_id = 0x00947700, | |
| .dev_name = "KSZ9477", | |
| .num_vlans = 4096, | |
| .num_alus = 4096, | |
| .num_statics = 16, | |
| .cpu_ports = 0x7F, /* can be configured as cpu port */ | |
| .port_cnt = 7, /* total physical port count */ | |
| }, | |
| }; | |
| static int ksz_switch_init(struct ksz_device *dev) | |
| { | |
| int i; | |
| mutex_init(&dev->reg_mutex); | |
| mutex_init(&dev->stats_mutex); | |
| mutex_init(&dev->alu_mutex); | |
| mutex_init(&dev->vlan_mutex); | |
| dev->ds->ops = &ksz_switch_ops; | |
| for (i = 0; i < ARRAY_SIZE(ksz_switch_chips); i++) { | |
| const struct ksz_chip_data *chip = &ksz_switch_chips[i]; | |
| if (dev->chip_id == chip->chip_id) { | |
| dev->name = chip->dev_name; | |
| dev->num_vlans = chip->num_vlans; | |
| dev->num_alus = chip->num_alus; | |
| dev->num_statics = chip->num_statics; | |
| dev->port_cnt = chip->port_cnt; | |
| dev->cpu_ports = chip->cpu_ports; | |
| break; | |
| } | |
| } | |
| /* no switch found */ | |
| if (!dev->port_cnt) | |
| return -ENODEV; | |
| return 0; | |
| } | |
| struct ksz_device *ksz_switch_alloc(struct device *base, | |
| const struct ksz_io_ops *ops, | |
| void *priv) | |
| { | |
| struct dsa_switch *ds; | |
| struct ksz_device *swdev; | |
| ds = dsa_switch_alloc(base, DSA_MAX_PORTS); | |
| if (!ds) | |
| return NULL; | |
| swdev = devm_kzalloc(base, sizeof(*swdev), GFP_KERNEL); | |
| if (!swdev) | |
| return NULL; | |
| ds->priv = swdev; | |
| swdev->dev = base; | |
| swdev->ds = ds; | |
| swdev->priv = priv; | |
| swdev->ops = ops; | |
| return swdev; | |
| } | |
| EXPORT_SYMBOL(ksz_switch_alloc); | |
| int ksz_switch_detect(struct ksz_device *dev) | |
| { | |
| u8 data8; | |
| u32 id32; | |
| int ret; | |
| /* turn off SPI DO Edge select */ | |
| ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8); | |
| if (ret) | |
| return ret; | |
| data8 &= ~SPI_AUTO_EDGE_DETECTION; | |
| ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8); | |
| if (ret) | |
| return ret; | |
| /* read chip id */ | |
| ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32); | |
| if (ret) | |
| return ret; | |
| dev->chip_id = id32; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(ksz_switch_detect); | |
| int ksz_switch_register(struct ksz_device *dev) | |
| { | |
| int ret; | |
| if (dev->pdata) | |
| dev->chip_id = dev->pdata->chip_id; | |
| if (ksz_switch_detect(dev)) | |
| return -EINVAL; | |
| ret = ksz_switch_init(dev); | |
| if (ret) | |
| return ret; | |
| return dsa_register_switch(dev->ds); | |
| } | |
| EXPORT_SYMBOL(ksz_switch_register); | |
| void ksz_switch_remove(struct ksz_device *dev) | |
| { | |
| dsa_unregister_switch(dev->ds); | |
| } | |
| EXPORT_SYMBOL(ksz_switch_remove); | |
| MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>"); | |
| MODULE_DESCRIPTION("Microchip KSZ Series Switch DSA Driver"); | |
| MODULE_LICENSE("GPL"); |