| /* | |
| * drxk_hard: DRX-K DVB-C/T demodulator driver | |
| * | |
| * Copyright (C) 2010-2011 Digital Devices GmbH | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * version 2 only, as published by the Free Software Foundation. | |
| * | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * To obtain the license, point your browser to | |
| * http://www.gnu.org/copyleft/gpl.html | |
| */ | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/moduleparam.h> | |
| #include <linux/init.h> | |
| #include <linux/delay.h> | |
| #include <linux/firmware.h> | |
| #include <linux/i2c.h> | |
| #include <linux/hardirq.h> | |
| #include <asm/div64.h> | |
| #include <media/dvb_frontend.h> | |
| #include "drxk.h" | |
| #include "drxk_hard.h" | |
| #include <media/dvb_math.h> | |
| static int power_down_dvbt(struct drxk_state *state, bool set_power_mode); | |
| static int power_down_qam(struct drxk_state *state); | |
| static int set_dvbt_standard(struct drxk_state *state, | |
| enum operation_mode o_mode); | |
| static int set_qam_standard(struct drxk_state *state, | |
| enum operation_mode o_mode); | |
| static int set_qam(struct drxk_state *state, u16 intermediate_freqk_hz, | |
| s32 tuner_freq_offset); | |
| static int set_dvbt_standard(struct drxk_state *state, | |
| enum operation_mode o_mode); | |
| static int dvbt_start(struct drxk_state *state); | |
| static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz, | |
| s32 tuner_freq_offset); | |
| static int get_qam_lock_status(struct drxk_state *state, u32 *p_lock_status); | |
| static int get_dvbt_lock_status(struct drxk_state *state, u32 *p_lock_status); | |
| static int switch_antenna_to_qam(struct drxk_state *state); | |
| static int switch_antenna_to_dvbt(struct drxk_state *state); | |
| static bool is_dvbt(struct drxk_state *state) | |
| { | |
| return state->m_operation_mode == OM_DVBT; | |
| } | |
| static bool is_qam(struct drxk_state *state) | |
| { | |
| return state->m_operation_mode == OM_QAM_ITU_A || | |
| state->m_operation_mode == OM_QAM_ITU_B || | |
| state->m_operation_mode == OM_QAM_ITU_C; | |
| } | |
| #define NOA1ROM 0 | |
| #define DRXDAP_FASI_SHORT_FORMAT(addr) (((addr) & 0xFC30FF80) == 0) | |
| #define DRXDAP_FASI_LONG_FORMAT(addr) (((addr) & 0xFC30FF80) != 0) | |
| #define DEFAULT_MER_83 165 | |
| #define DEFAULT_MER_93 250 | |
| #ifndef DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH | |
| #define DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH (0x02) | |
| #endif | |
| #ifndef DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH | |
| #define DRXK_MPEG_PARALLEL_OUTPUT_PIN_DRIVE_STRENGTH (0x03) | |
| #endif | |
| #define DEFAULT_DRXK_MPEG_LOCK_TIMEOUT 700 | |
| #define DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT 500 | |
| #ifndef DRXK_KI_RAGC_ATV | |
| #define DRXK_KI_RAGC_ATV 4 | |
| #endif | |
| #ifndef DRXK_KI_IAGC_ATV | |
| #define DRXK_KI_IAGC_ATV 6 | |
| #endif | |
| #ifndef DRXK_KI_DAGC_ATV | |
| #define DRXK_KI_DAGC_ATV 7 | |
| #endif | |
| #ifndef DRXK_KI_RAGC_QAM | |
| #define DRXK_KI_RAGC_QAM 3 | |
| #endif | |
| #ifndef DRXK_KI_IAGC_QAM | |
| #define DRXK_KI_IAGC_QAM 4 | |
| #endif | |
| #ifndef DRXK_KI_DAGC_QAM | |
| #define DRXK_KI_DAGC_QAM 7 | |
| #endif | |
| #ifndef DRXK_KI_RAGC_DVBT | |
| #define DRXK_KI_RAGC_DVBT (IsA1WithPatchCode(state) ? 3 : 2) | |
| #endif | |
| #ifndef DRXK_KI_IAGC_DVBT | |
| #define DRXK_KI_IAGC_DVBT (IsA1WithPatchCode(state) ? 4 : 2) | |
| #endif | |
| #ifndef DRXK_KI_DAGC_DVBT | |
| #define DRXK_KI_DAGC_DVBT (IsA1WithPatchCode(state) ? 10 : 7) | |
| #endif | |
| #ifndef DRXK_AGC_DAC_OFFSET | |
| #define DRXK_AGC_DAC_OFFSET (0x800) | |
| #endif | |
| #ifndef DRXK_BANDWIDTH_8MHZ_IN_HZ | |
| #define DRXK_BANDWIDTH_8MHZ_IN_HZ (0x8B8249L) | |
| #endif | |
| #ifndef DRXK_BANDWIDTH_7MHZ_IN_HZ | |
| #define DRXK_BANDWIDTH_7MHZ_IN_HZ (0x7A1200L) | |
| #endif | |
| #ifndef DRXK_BANDWIDTH_6MHZ_IN_HZ | |
| #define DRXK_BANDWIDTH_6MHZ_IN_HZ (0x68A1B6L) | |
| #endif | |
| #ifndef DRXK_QAM_SYMBOLRATE_MAX | |
| #define DRXK_QAM_SYMBOLRATE_MAX (7233000) | |
| #endif | |
| #define DRXK_BL_ROM_OFFSET_TAPS_DVBT 56 | |
| #define DRXK_BL_ROM_OFFSET_TAPS_ITU_A 64 | |
| #define DRXK_BL_ROM_OFFSET_TAPS_ITU_C 0x5FE0 | |
| #define DRXK_BL_ROM_OFFSET_TAPS_BG 24 | |
| #define DRXK_BL_ROM_OFFSET_TAPS_DKILLP 32 | |
| #define DRXK_BL_ROM_OFFSET_TAPS_NTSC 40 | |
| #define DRXK_BL_ROM_OFFSET_TAPS_FM 48 | |
| #define DRXK_BL_ROM_OFFSET_UCODE 0 | |
| #define DRXK_BLC_TIMEOUT 100 | |
| #define DRXK_BLCC_NR_ELEMENTS_TAPS 2 | |
| #define DRXK_BLCC_NR_ELEMENTS_UCODE 6 | |
| #define DRXK_BLDC_NR_ELEMENTS_TAPS 28 | |
| #ifndef DRXK_OFDM_NE_NOTCH_WIDTH | |
| #define DRXK_OFDM_NE_NOTCH_WIDTH (4) | |
| #endif | |
| #define DRXK_QAM_SL_SIG_POWER_QAM16 (40960) | |
| #define DRXK_QAM_SL_SIG_POWER_QAM32 (20480) | |
| #define DRXK_QAM_SL_SIG_POWER_QAM64 (43008) | |
| #define DRXK_QAM_SL_SIG_POWER_QAM128 (20992) | |
| #define DRXK_QAM_SL_SIG_POWER_QAM256 (43520) | |
| static unsigned int debug; | |
| module_param(debug, int, 0644); | |
| MODULE_PARM_DESC(debug, "enable debug messages"); | |
| #define dprintk(level, fmt, arg...) do { \ | |
| if (debug >= level) \ | |
| printk(KERN_DEBUG KBUILD_MODNAME ": %s " fmt, __func__, ##arg); \ | |
| } while (0) | |
| static inline u32 MulDiv32(u32 a, u32 b, u32 c) | |
| { | |
| u64 tmp64; | |
| tmp64 = (u64) a * (u64) b; | |
| do_div(tmp64, c); | |
| return (u32) tmp64; | |
| } | |
| static inline u32 Frac28a(u32 a, u32 c) | |
| { | |
| int i = 0; | |
| u32 Q1 = 0; | |
| u32 R0 = 0; | |
| R0 = (a % c) << 4; /* 32-28 == 4 shifts possible at max */ | |
| Q1 = a / c; /* | |
| * integer part, only the 4 least significant | |
| * bits will be visible in the result | |
| */ | |
| /* division using radix 16, 7 nibbles in the result */ | |
| for (i = 0; i < 7; i++) { | |
| Q1 = (Q1 << 4) | (R0 / c); | |
| R0 = (R0 % c) << 4; | |
| } | |
| /* rounding */ | |
| if ((R0 >> 3) >= c) | |
| Q1++; | |
| return Q1; | |
| } | |
| static inline u32 log10times100(u32 value) | |
| { | |
| return (100L * intlog10(value)) >> 24; | |
| } | |
| /***************************************************************************/ | |
| /* I2C **********************************************************************/ | |
| /***************************************************************************/ | |
| static int drxk_i2c_lock(struct drxk_state *state) | |
| { | |
| i2c_lock_adapter(state->i2c); | |
| state->drxk_i2c_exclusive_lock = true; | |
| return 0; | |
| } | |
| static void drxk_i2c_unlock(struct drxk_state *state) | |
| { | |
| if (!state->drxk_i2c_exclusive_lock) | |
| return; | |
| i2c_unlock_adapter(state->i2c); | |
| state->drxk_i2c_exclusive_lock = false; | |
| } | |
| static int drxk_i2c_transfer(struct drxk_state *state, struct i2c_msg *msgs, | |
| unsigned len) | |
| { | |
| if (state->drxk_i2c_exclusive_lock) | |
| return __i2c_transfer(state->i2c, msgs, len); | |
| else | |
| return i2c_transfer(state->i2c, msgs, len); | |
| } | |
| static int i2c_read1(struct drxk_state *state, u8 adr, u8 *val) | |
| { | |
| struct i2c_msg msgs[1] = { {.addr = adr, .flags = I2C_M_RD, | |
| .buf = val, .len = 1} | |
| }; | |
| return drxk_i2c_transfer(state, msgs, 1); | |
| } | |
| static int i2c_write(struct drxk_state *state, u8 adr, u8 *data, int len) | |
| { | |
| int status; | |
| struct i2c_msg msg = { | |
| .addr = adr, .flags = 0, .buf = data, .len = len }; | |
| dprintk(3, ":"); | |
| if (debug > 2) { | |
| int i; | |
| for (i = 0; i < len; i++) | |
| pr_cont(" %02x", data[i]); | |
| pr_cont("\n"); | |
| } | |
| status = drxk_i2c_transfer(state, &msg, 1); | |
| if (status >= 0 && status != 1) | |
| status = -EIO; | |
| if (status < 0) | |
| pr_err("i2c write error at addr 0x%02x\n", adr); | |
| return status; | |
| } | |
| static int i2c_read(struct drxk_state *state, | |
| u8 adr, u8 *msg, int len, u8 *answ, int alen) | |
| { | |
| int status; | |
| struct i2c_msg msgs[2] = { | |
| {.addr = adr, .flags = 0, | |
| .buf = msg, .len = len}, | |
| {.addr = adr, .flags = I2C_M_RD, | |
| .buf = answ, .len = alen} | |
| }; | |
| status = drxk_i2c_transfer(state, msgs, 2); | |
| if (status != 2) { | |
| if (debug > 2) | |
| pr_cont(": ERROR!\n"); | |
| if (status >= 0) | |
| status = -EIO; | |
| pr_err("i2c read error at addr 0x%02x\n", adr); | |
| return status; | |
| } | |
| if (debug > 2) { | |
| int i; | |
| dprintk(2, ": read from"); | |
| for (i = 0; i < len; i++) | |
| pr_cont(" %02x", msg[i]); | |
| pr_cont(", value = "); | |
| for (i = 0; i < alen; i++) | |
| pr_cont(" %02x", answ[i]); | |
| pr_cont("\n"); | |
| } | |
| return 0; | |
| } | |
| static int read16_flags(struct drxk_state *state, u32 reg, u16 *data, u8 flags) | |
| { | |
| int status; | |
| u8 adr = state->demod_address, mm1[4], mm2[2], len; | |
| if (state->single_master) | |
| flags |= 0xC0; | |
| if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) { | |
| mm1[0] = (((reg << 1) & 0xFF) | 0x01); | |
| mm1[1] = ((reg >> 16) & 0xFF); | |
| mm1[2] = ((reg >> 24) & 0xFF) | flags; | |
| mm1[3] = ((reg >> 7) & 0xFF); | |
| len = 4; | |
| } else { | |
| mm1[0] = ((reg << 1) & 0xFF); | |
| mm1[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0)); | |
| len = 2; | |
| } | |
| dprintk(2, "(0x%08x, 0x%02x)\n", reg, flags); | |
| status = i2c_read(state, adr, mm1, len, mm2, 2); | |
| if (status < 0) | |
| return status; | |
| if (data) | |
| *data = mm2[0] | (mm2[1] << 8); | |
| return 0; | |
| } | |
| static int read16(struct drxk_state *state, u32 reg, u16 *data) | |
| { | |
| return read16_flags(state, reg, data, 0); | |
| } | |
| static int read32_flags(struct drxk_state *state, u32 reg, u32 *data, u8 flags) | |
| { | |
| int status; | |
| u8 adr = state->demod_address, mm1[4], mm2[4], len; | |
| if (state->single_master) | |
| flags |= 0xC0; | |
| if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) { | |
| mm1[0] = (((reg << 1) & 0xFF) | 0x01); | |
| mm1[1] = ((reg >> 16) & 0xFF); | |
| mm1[2] = ((reg >> 24) & 0xFF) | flags; | |
| mm1[3] = ((reg >> 7) & 0xFF); | |
| len = 4; | |
| } else { | |
| mm1[0] = ((reg << 1) & 0xFF); | |
| mm1[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0)); | |
| len = 2; | |
| } | |
| dprintk(2, "(0x%08x, 0x%02x)\n", reg, flags); | |
| status = i2c_read(state, adr, mm1, len, mm2, 4); | |
| if (status < 0) | |
| return status; | |
| if (data) | |
| *data = mm2[0] | (mm2[1] << 8) | | |
| (mm2[2] << 16) | (mm2[3] << 24); | |
| return 0; | |
| } | |
| static int read32(struct drxk_state *state, u32 reg, u32 *data) | |
| { | |
| return read32_flags(state, reg, data, 0); | |
| } | |
| static int write16_flags(struct drxk_state *state, u32 reg, u16 data, u8 flags) | |
| { | |
| u8 adr = state->demod_address, mm[6], len; | |
| if (state->single_master) | |
| flags |= 0xC0; | |
| if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) { | |
| mm[0] = (((reg << 1) & 0xFF) | 0x01); | |
| mm[1] = ((reg >> 16) & 0xFF); | |
| mm[2] = ((reg >> 24) & 0xFF) | flags; | |
| mm[3] = ((reg >> 7) & 0xFF); | |
| len = 4; | |
| } else { | |
| mm[0] = ((reg << 1) & 0xFF); | |
| mm[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0)); | |
| len = 2; | |
| } | |
| mm[len] = data & 0xff; | |
| mm[len + 1] = (data >> 8) & 0xff; | |
| dprintk(2, "(0x%08x, 0x%04x, 0x%02x)\n", reg, data, flags); | |
| return i2c_write(state, adr, mm, len + 2); | |
| } | |
| static int write16(struct drxk_state *state, u32 reg, u16 data) | |
| { | |
| return write16_flags(state, reg, data, 0); | |
| } | |
| static int write32_flags(struct drxk_state *state, u32 reg, u32 data, u8 flags) | |
| { | |
| u8 adr = state->demod_address, mm[8], len; | |
| if (state->single_master) | |
| flags |= 0xC0; | |
| if (DRXDAP_FASI_LONG_FORMAT(reg) || (flags != 0)) { | |
| mm[0] = (((reg << 1) & 0xFF) | 0x01); | |
| mm[1] = ((reg >> 16) & 0xFF); | |
| mm[2] = ((reg >> 24) & 0xFF) | flags; | |
| mm[3] = ((reg >> 7) & 0xFF); | |
| len = 4; | |
| } else { | |
| mm[0] = ((reg << 1) & 0xFF); | |
| mm[1] = (((reg >> 16) & 0x0F) | ((reg >> 18) & 0xF0)); | |
| len = 2; | |
| } | |
| mm[len] = data & 0xff; | |
| mm[len + 1] = (data >> 8) & 0xff; | |
| mm[len + 2] = (data >> 16) & 0xff; | |
| mm[len + 3] = (data >> 24) & 0xff; | |
| dprintk(2, "(0x%08x, 0x%08x, 0x%02x)\n", reg, data, flags); | |
| return i2c_write(state, adr, mm, len + 4); | |
| } | |
| static int write32(struct drxk_state *state, u32 reg, u32 data) | |
| { | |
| return write32_flags(state, reg, data, 0); | |
| } | |
| static int write_block(struct drxk_state *state, u32 address, | |
| const int block_size, const u8 p_block[]) | |
| { | |
| int status = 0, blk_size = block_size; | |
| u8 flags = 0; | |
| if (state->single_master) | |
| flags |= 0xC0; | |
| while (blk_size > 0) { | |
| int chunk = blk_size > state->m_chunk_size ? | |
| state->m_chunk_size : blk_size; | |
| u8 *adr_buf = &state->chunk[0]; | |
| u32 adr_length = 0; | |
| if (DRXDAP_FASI_LONG_FORMAT(address) || (flags != 0)) { | |
| adr_buf[0] = (((address << 1) & 0xFF) | 0x01); | |
| adr_buf[1] = ((address >> 16) & 0xFF); | |
| adr_buf[2] = ((address >> 24) & 0xFF); | |
| adr_buf[3] = ((address >> 7) & 0xFF); | |
| adr_buf[2] |= flags; | |
| adr_length = 4; | |
| if (chunk == state->m_chunk_size) | |
| chunk -= 2; | |
| } else { | |
| adr_buf[0] = ((address << 1) & 0xFF); | |
| adr_buf[1] = (((address >> 16) & 0x0F) | | |
| ((address >> 18) & 0xF0)); | |
| adr_length = 2; | |
| } | |
| memcpy(&state->chunk[adr_length], p_block, chunk); | |
| dprintk(2, "(0x%08x, 0x%02x)\n", address, flags); | |
| if (debug > 1) { | |
| int i; | |
| if (p_block) | |
| for (i = 0; i < chunk; i++) | |
| pr_cont(" %02x", p_block[i]); | |
| pr_cont("\n"); | |
| } | |
| status = i2c_write(state, state->demod_address, | |
| &state->chunk[0], chunk + adr_length); | |
| if (status < 0) { | |
| pr_err("%s: i2c write error at addr 0x%02x\n", | |
| __func__, address); | |
| break; | |
| } | |
| p_block += chunk; | |
| address += (chunk >> 1); | |
| blk_size -= chunk; | |
| } | |
| return status; | |
| } | |
| #ifndef DRXK_MAX_RETRIES_POWERUP | |
| #define DRXK_MAX_RETRIES_POWERUP 20 | |
| #endif | |
| static int power_up_device(struct drxk_state *state) | |
| { | |
| int status; | |
| u8 data = 0; | |
| u16 retry_count = 0; | |
| dprintk(1, "\n"); | |
| status = i2c_read1(state, state->demod_address, &data); | |
| if (status < 0) { | |
| do { | |
| data = 0; | |
| status = i2c_write(state, state->demod_address, | |
| &data, 1); | |
| usleep_range(10000, 11000); | |
| retry_count++; | |
| if (status < 0) | |
| continue; | |
| status = i2c_read1(state, state->demod_address, | |
| &data); | |
| } while (status < 0 && | |
| (retry_count < DRXK_MAX_RETRIES_POWERUP)); | |
| if (status < 0 && retry_count >= DRXK_MAX_RETRIES_POWERUP) | |
| goto error; | |
| } | |
| /* Make sure all clk domains are active */ | |
| status = write16(state, SIO_CC_PWD_MODE__A, SIO_CC_PWD_MODE_LEVEL_NONE); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY); | |
| if (status < 0) | |
| goto error; | |
| /* Enable pll lock tests */ | |
| status = write16(state, SIO_CC_PLL_LOCK__A, 1); | |
| if (status < 0) | |
| goto error; | |
| state->m_current_power_mode = DRX_POWER_UP; | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int init_state(struct drxk_state *state) | |
| { | |
| /* | |
| * FIXME: most (all?) of the values below should be moved into | |
| * struct drxk_config, as they are probably board-specific | |
| */ | |
| u32 ul_vsb_if_agc_mode = DRXK_AGC_CTRL_AUTO; | |
| u32 ul_vsb_if_agc_output_level = 0; | |
| u32 ul_vsb_if_agc_min_level = 0; | |
| u32 ul_vsb_if_agc_max_level = 0x7FFF; | |
| u32 ul_vsb_if_agc_speed = 3; | |
| u32 ul_vsb_rf_agc_mode = DRXK_AGC_CTRL_AUTO; | |
| u32 ul_vsb_rf_agc_output_level = 0; | |
| u32 ul_vsb_rf_agc_min_level = 0; | |
| u32 ul_vsb_rf_agc_max_level = 0x7FFF; | |
| u32 ul_vsb_rf_agc_speed = 3; | |
| u32 ul_vsb_rf_agc_top = 9500; | |
| u32 ul_vsb_rf_agc_cut_off_current = 4000; | |
| u32 ul_atv_if_agc_mode = DRXK_AGC_CTRL_AUTO; | |
| u32 ul_atv_if_agc_output_level = 0; | |
| u32 ul_atv_if_agc_min_level = 0; | |
| u32 ul_atv_if_agc_max_level = 0; | |
| u32 ul_atv_if_agc_speed = 3; | |
| u32 ul_atv_rf_agc_mode = DRXK_AGC_CTRL_OFF; | |
| u32 ul_atv_rf_agc_output_level = 0; | |
| u32 ul_atv_rf_agc_min_level = 0; | |
| u32 ul_atv_rf_agc_max_level = 0; | |
| u32 ul_atv_rf_agc_top = 9500; | |
| u32 ul_atv_rf_agc_cut_off_current = 4000; | |
| u32 ul_atv_rf_agc_speed = 3; | |
| u32 ulQual83 = DEFAULT_MER_83; | |
| u32 ulQual93 = DEFAULT_MER_93; | |
| u32 ul_mpeg_lock_time_out = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT; | |
| u32 ul_demod_lock_time_out = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT; | |
| /* io_pad_cfg register (8 bit reg.) MSB bit is 1 (default value) */ | |
| /* io_pad_cfg_mode output mode is drive always */ | |
| /* io_pad_cfg_drive is set to power 2 (23 mA) */ | |
| u32 ul_gpio_cfg = 0x0113; | |
| u32 ul_invert_ts_clock = 0; | |
| u32 ul_ts_data_strength = DRXK_MPEG_SERIAL_OUTPUT_PIN_DRIVE_STRENGTH; | |
| u32 ul_dvbt_bitrate = 50000000; | |
| u32 ul_dvbc_bitrate = DRXK_QAM_SYMBOLRATE_MAX * 8; | |
| u32 ul_insert_rs_byte = 0; | |
| u32 ul_rf_mirror = 1; | |
| u32 ul_power_down = 0; | |
| dprintk(1, "\n"); | |
| state->m_has_lna = false; | |
| state->m_has_dvbt = false; | |
| state->m_has_dvbc = false; | |
| state->m_has_atv = false; | |
| state->m_has_oob = false; | |
| state->m_has_audio = false; | |
| if (!state->m_chunk_size) | |
| state->m_chunk_size = 124; | |
| state->m_osc_clock_freq = 0; | |
| state->m_smart_ant_inverted = false; | |
| state->m_b_p_down_open_bridge = false; | |
| /* real system clock frequency in kHz */ | |
| state->m_sys_clock_freq = 151875; | |
| /* Timing div, 250ns/Psys */ | |
| /* Timing div, = (delay (nano seconds) * sysclk (kHz))/ 1000 */ | |
| state->m_hi_cfg_timing_div = ((state->m_sys_clock_freq / 1000) * | |
| HI_I2C_DELAY) / 1000; | |
| /* Clipping */ | |
| if (state->m_hi_cfg_timing_div > SIO_HI_RA_RAM_PAR_2_CFG_DIV__M) | |
| state->m_hi_cfg_timing_div = SIO_HI_RA_RAM_PAR_2_CFG_DIV__M; | |
| state->m_hi_cfg_wake_up_key = (state->demod_address << 1); | |
| /* port/bridge/power down ctrl */ | |
| state->m_hi_cfg_ctrl = SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE; | |
| state->m_b_power_down = (ul_power_down != 0); | |
| state->m_drxk_a3_patch_code = false; | |
| /* Init AGC and PGA parameters */ | |
| /* VSB IF */ | |
| state->m_vsb_if_agc_cfg.ctrl_mode = ul_vsb_if_agc_mode; | |
| state->m_vsb_if_agc_cfg.output_level = ul_vsb_if_agc_output_level; | |
| state->m_vsb_if_agc_cfg.min_output_level = ul_vsb_if_agc_min_level; | |
| state->m_vsb_if_agc_cfg.max_output_level = ul_vsb_if_agc_max_level; | |
| state->m_vsb_if_agc_cfg.speed = ul_vsb_if_agc_speed; | |
| state->m_vsb_pga_cfg = 140; | |
| /* VSB RF */ | |
| state->m_vsb_rf_agc_cfg.ctrl_mode = ul_vsb_rf_agc_mode; | |
| state->m_vsb_rf_agc_cfg.output_level = ul_vsb_rf_agc_output_level; | |
| state->m_vsb_rf_agc_cfg.min_output_level = ul_vsb_rf_agc_min_level; | |
| state->m_vsb_rf_agc_cfg.max_output_level = ul_vsb_rf_agc_max_level; | |
| state->m_vsb_rf_agc_cfg.speed = ul_vsb_rf_agc_speed; | |
| state->m_vsb_rf_agc_cfg.top = ul_vsb_rf_agc_top; | |
| state->m_vsb_rf_agc_cfg.cut_off_current = ul_vsb_rf_agc_cut_off_current; | |
| state->m_vsb_pre_saw_cfg.reference = 0x07; | |
| state->m_vsb_pre_saw_cfg.use_pre_saw = true; | |
| state->m_Quality83percent = DEFAULT_MER_83; | |
| state->m_Quality93percent = DEFAULT_MER_93; | |
| if (ulQual93 <= 500 && ulQual83 < ulQual93) { | |
| state->m_Quality83percent = ulQual83; | |
| state->m_Quality93percent = ulQual93; | |
| } | |
| /* ATV IF */ | |
| state->m_atv_if_agc_cfg.ctrl_mode = ul_atv_if_agc_mode; | |
| state->m_atv_if_agc_cfg.output_level = ul_atv_if_agc_output_level; | |
| state->m_atv_if_agc_cfg.min_output_level = ul_atv_if_agc_min_level; | |
| state->m_atv_if_agc_cfg.max_output_level = ul_atv_if_agc_max_level; | |
| state->m_atv_if_agc_cfg.speed = ul_atv_if_agc_speed; | |
| /* ATV RF */ | |
| state->m_atv_rf_agc_cfg.ctrl_mode = ul_atv_rf_agc_mode; | |
| state->m_atv_rf_agc_cfg.output_level = ul_atv_rf_agc_output_level; | |
| state->m_atv_rf_agc_cfg.min_output_level = ul_atv_rf_agc_min_level; | |
| state->m_atv_rf_agc_cfg.max_output_level = ul_atv_rf_agc_max_level; | |
| state->m_atv_rf_agc_cfg.speed = ul_atv_rf_agc_speed; | |
| state->m_atv_rf_agc_cfg.top = ul_atv_rf_agc_top; | |
| state->m_atv_rf_agc_cfg.cut_off_current = ul_atv_rf_agc_cut_off_current; | |
| state->m_atv_pre_saw_cfg.reference = 0x04; | |
| state->m_atv_pre_saw_cfg.use_pre_saw = true; | |
| /* DVBT RF */ | |
| state->m_dvbt_rf_agc_cfg.ctrl_mode = DRXK_AGC_CTRL_OFF; | |
| state->m_dvbt_rf_agc_cfg.output_level = 0; | |
| state->m_dvbt_rf_agc_cfg.min_output_level = 0; | |
| state->m_dvbt_rf_agc_cfg.max_output_level = 0xFFFF; | |
| state->m_dvbt_rf_agc_cfg.top = 0x2100; | |
| state->m_dvbt_rf_agc_cfg.cut_off_current = 4000; | |
| state->m_dvbt_rf_agc_cfg.speed = 1; | |
| /* DVBT IF */ | |
| state->m_dvbt_if_agc_cfg.ctrl_mode = DRXK_AGC_CTRL_AUTO; | |
| state->m_dvbt_if_agc_cfg.output_level = 0; | |
| state->m_dvbt_if_agc_cfg.min_output_level = 0; | |
| state->m_dvbt_if_agc_cfg.max_output_level = 9000; | |
| state->m_dvbt_if_agc_cfg.top = 13424; | |
| state->m_dvbt_if_agc_cfg.cut_off_current = 0; | |
| state->m_dvbt_if_agc_cfg.speed = 3; | |
| state->m_dvbt_if_agc_cfg.fast_clip_ctrl_delay = 30; | |
| state->m_dvbt_if_agc_cfg.ingain_tgt_max = 30000; | |
| /* state->m_dvbtPgaCfg = 140; */ | |
| state->m_dvbt_pre_saw_cfg.reference = 4; | |
| state->m_dvbt_pre_saw_cfg.use_pre_saw = false; | |
| /* QAM RF */ | |
| state->m_qam_rf_agc_cfg.ctrl_mode = DRXK_AGC_CTRL_OFF; | |
| state->m_qam_rf_agc_cfg.output_level = 0; | |
| state->m_qam_rf_agc_cfg.min_output_level = 6023; | |
| state->m_qam_rf_agc_cfg.max_output_level = 27000; | |
| state->m_qam_rf_agc_cfg.top = 0x2380; | |
| state->m_qam_rf_agc_cfg.cut_off_current = 4000; | |
| state->m_qam_rf_agc_cfg.speed = 3; | |
| /* QAM IF */ | |
| state->m_qam_if_agc_cfg.ctrl_mode = DRXK_AGC_CTRL_AUTO; | |
| state->m_qam_if_agc_cfg.output_level = 0; | |
| state->m_qam_if_agc_cfg.min_output_level = 0; | |
| state->m_qam_if_agc_cfg.max_output_level = 9000; | |
| state->m_qam_if_agc_cfg.top = 0x0511; | |
| state->m_qam_if_agc_cfg.cut_off_current = 0; | |
| state->m_qam_if_agc_cfg.speed = 3; | |
| state->m_qam_if_agc_cfg.ingain_tgt_max = 5119; | |
| state->m_qam_if_agc_cfg.fast_clip_ctrl_delay = 50; | |
| state->m_qam_pga_cfg = 140; | |
| state->m_qam_pre_saw_cfg.reference = 4; | |
| state->m_qam_pre_saw_cfg.use_pre_saw = false; | |
| state->m_operation_mode = OM_NONE; | |
| state->m_drxk_state = DRXK_UNINITIALIZED; | |
| /* MPEG output configuration */ | |
| state->m_enable_mpeg_output = true; /* If TRUE; enable MPEG ouput */ | |
| state->m_insert_rs_byte = false; /* If TRUE; insert RS byte */ | |
| state->m_invert_data = false; /* If TRUE; invert DATA signals */ | |
| state->m_invert_err = false; /* If TRUE; invert ERR signal */ | |
| state->m_invert_str = false; /* If TRUE; invert STR signals */ | |
| state->m_invert_val = false; /* If TRUE; invert VAL signals */ | |
| state->m_invert_clk = (ul_invert_ts_clock != 0); /* If TRUE; invert CLK signals */ | |
| /* If TRUE; static MPEG clockrate will be used; | |
| otherwise clockrate will adapt to the bitrate of the TS */ | |
| state->m_dvbt_bitrate = ul_dvbt_bitrate; | |
| state->m_dvbc_bitrate = ul_dvbc_bitrate; | |
| state->m_ts_data_strength = (ul_ts_data_strength & 0x07); | |
| /* Maximum bitrate in b/s in case static clockrate is selected */ | |
| state->m_mpeg_ts_static_bitrate = 19392658; | |
| state->m_disable_te_ihandling = false; | |
| if (ul_insert_rs_byte) | |
| state->m_insert_rs_byte = true; | |
| state->m_mpeg_lock_time_out = DEFAULT_DRXK_MPEG_LOCK_TIMEOUT; | |
| if (ul_mpeg_lock_time_out < 10000) | |
| state->m_mpeg_lock_time_out = ul_mpeg_lock_time_out; | |
| state->m_demod_lock_time_out = DEFAULT_DRXK_DEMOD_LOCK_TIMEOUT; | |
| if (ul_demod_lock_time_out < 10000) | |
| state->m_demod_lock_time_out = ul_demod_lock_time_out; | |
| /* QAM defaults */ | |
| state->m_constellation = DRX_CONSTELLATION_AUTO; | |
| state->m_qam_interleave_mode = DRXK_QAM_I12_J17; | |
| state->m_fec_rs_plen = 204 * 8; /* fecRsPlen annex A */ | |
| state->m_fec_rs_prescale = 1; | |
| state->m_sqi_speed = DRXK_DVBT_SQI_SPEED_MEDIUM; | |
| state->m_agcfast_clip_ctrl_delay = 0; | |
| state->m_gpio_cfg = ul_gpio_cfg; | |
| state->m_b_power_down = false; | |
| state->m_current_power_mode = DRX_POWER_DOWN; | |
| state->m_rfmirror = (ul_rf_mirror == 0); | |
| state->m_if_agc_pol = false; | |
| return 0; | |
| } | |
| static int drxx_open(struct drxk_state *state) | |
| { | |
| int status = 0; | |
| u32 jtag = 0; | |
| u16 bid = 0; | |
| u16 key = 0; | |
| dprintk(1, "\n"); | |
| /* stop lock indicator process */ | |
| status = write16(state, SCU_RAM_GPIO__A, | |
| SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); | |
| if (status < 0) | |
| goto error; | |
| /* Check device id */ | |
| status = read16(state, SIO_TOP_COMM_KEY__A, &key); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY); | |
| if (status < 0) | |
| goto error; | |
| status = read32(state, SIO_TOP_JTAGID_LO__A, &jtag); | |
| if (status < 0) | |
| goto error; | |
| status = read16(state, SIO_PDR_UIO_IN_HI__A, &bid); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_TOP_COMM_KEY__A, key); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int get_device_capabilities(struct drxk_state *state) | |
| { | |
| u16 sio_pdr_ohw_cfg = 0; | |
| u32 sio_top_jtagid_lo = 0; | |
| int status; | |
| const char *spin = ""; | |
| dprintk(1, "\n"); | |
| /* driver 0.9.0 */ | |
| /* stop lock indicator process */ | |
| status = write16(state, SCU_RAM_GPIO__A, | |
| SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY); | |
| if (status < 0) | |
| goto error; | |
| status = read16(state, SIO_PDR_OHW_CFG__A, &sio_pdr_ohw_cfg); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| switch ((sio_pdr_ohw_cfg & SIO_PDR_OHW_CFG_FREF_SEL__M)) { | |
| case 0: | |
| /* ignore (bypass ?) */ | |
| break; | |
| case 1: | |
| /* 27 MHz */ | |
| state->m_osc_clock_freq = 27000; | |
| break; | |
| case 2: | |
| /* 20.25 MHz */ | |
| state->m_osc_clock_freq = 20250; | |
| break; | |
| case 3: | |
| /* 4 MHz */ | |
| state->m_osc_clock_freq = 20250; | |
| break; | |
| default: | |
| pr_err("Clock Frequency is unknown\n"); | |
| return -EINVAL; | |
| } | |
| /* | |
| Determine device capabilities | |
| Based on pinning v14 | |
| */ | |
| status = read32(state, SIO_TOP_JTAGID_LO__A, &sio_top_jtagid_lo); | |
| if (status < 0) | |
| goto error; | |
| pr_info("status = 0x%08x\n", sio_top_jtagid_lo); | |
| /* driver 0.9.0 */ | |
| switch ((sio_top_jtagid_lo >> 29) & 0xF) { | |
| case 0: | |
| state->m_device_spin = DRXK_SPIN_A1; | |
| spin = "A1"; | |
| break; | |
| case 2: | |
| state->m_device_spin = DRXK_SPIN_A2; | |
| spin = "A2"; | |
| break; | |
| case 3: | |
| state->m_device_spin = DRXK_SPIN_A3; | |
| spin = "A3"; | |
| break; | |
| default: | |
| state->m_device_spin = DRXK_SPIN_UNKNOWN; | |
| status = -EINVAL; | |
| pr_err("Spin %d unknown\n", (sio_top_jtagid_lo >> 29) & 0xF); | |
| goto error2; | |
| } | |
| switch ((sio_top_jtagid_lo >> 12) & 0xFF) { | |
| case 0x13: | |
| /* typeId = DRX3913K_TYPE_ID */ | |
| state->m_has_lna = false; | |
| state->m_has_oob = false; | |
| state->m_has_atv = false; | |
| state->m_has_audio = false; | |
| state->m_has_dvbt = true; | |
| state->m_has_dvbc = true; | |
| state->m_has_sawsw = true; | |
| state->m_has_gpio2 = false; | |
| state->m_has_gpio1 = false; | |
| state->m_has_irqn = false; | |
| break; | |
| case 0x15: | |
| /* typeId = DRX3915K_TYPE_ID */ | |
| state->m_has_lna = false; | |
| state->m_has_oob = false; | |
| state->m_has_atv = true; | |
| state->m_has_audio = false; | |
| state->m_has_dvbt = true; | |
| state->m_has_dvbc = false; | |
| state->m_has_sawsw = true; | |
| state->m_has_gpio2 = true; | |
| state->m_has_gpio1 = true; | |
| state->m_has_irqn = false; | |
| break; | |
| case 0x16: | |
| /* typeId = DRX3916K_TYPE_ID */ | |
| state->m_has_lna = false; | |
| state->m_has_oob = false; | |
| state->m_has_atv = true; | |
| state->m_has_audio = false; | |
| state->m_has_dvbt = true; | |
| state->m_has_dvbc = false; | |
| state->m_has_sawsw = true; | |
| state->m_has_gpio2 = true; | |
| state->m_has_gpio1 = true; | |
| state->m_has_irqn = false; | |
| break; | |
| case 0x18: | |
| /* typeId = DRX3918K_TYPE_ID */ | |
| state->m_has_lna = false; | |
| state->m_has_oob = false; | |
| state->m_has_atv = true; | |
| state->m_has_audio = true; | |
| state->m_has_dvbt = true; | |
| state->m_has_dvbc = false; | |
| state->m_has_sawsw = true; | |
| state->m_has_gpio2 = true; | |
| state->m_has_gpio1 = true; | |
| state->m_has_irqn = false; | |
| break; | |
| case 0x21: | |
| /* typeId = DRX3921K_TYPE_ID */ | |
| state->m_has_lna = false; | |
| state->m_has_oob = false; | |
| state->m_has_atv = true; | |
| state->m_has_audio = true; | |
| state->m_has_dvbt = true; | |
| state->m_has_dvbc = true; | |
| state->m_has_sawsw = true; | |
| state->m_has_gpio2 = true; | |
| state->m_has_gpio1 = true; | |
| state->m_has_irqn = false; | |
| break; | |
| case 0x23: | |
| /* typeId = DRX3923K_TYPE_ID */ | |
| state->m_has_lna = false; | |
| state->m_has_oob = false; | |
| state->m_has_atv = true; | |
| state->m_has_audio = true; | |
| state->m_has_dvbt = true; | |
| state->m_has_dvbc = true; | |
| state->m_has_sawsw = true; | |
| state->m_has_gpio2 = true; | |
| state->m_has_gpio1 = true; | |
| state->m_has_irqn = false; | |
| break; | |
| case 0x25: | |
| /* typeId = DRX3925K_TYPE_ID */ | |
| state->m_has_lna = false; | |
| state->m_has_oob = false; | |
| state->m_has_atv = true; | |
| state->m_has_audio = true; | |
| state->m_has_dvbt = true; | |
| state->m_has_dvbc = true; | |
| state->m_has_sawsw = true; | |
| state->m_has_gpio2 = true; | |
| state->m_has_gpio1 = true; | |
| state->m_has_irqn = false; | |
| break; | |
| case 0x26: | |
| /* typeId = DRX3926K_TYPE_ID */ | |
| state->m_has_lna = false; | |
| state->m_has_oob = false; | |
| state->m_has_atv = true; | |
| state->m_has_audio = false; | |
| state->m_has_dvbt = true; | |
| state->m_has_dvbc = true; | |
| state->m_has_sawsw = true; | |
| state->m_has_gpio2 = true; | |
| state->m_has_gpio1 = true; | |
| state->m_has_irqn = false; | |
| break; | |
| default: | |
| pr_err("DeviceID 0x%02x not supported\n", | |
| ((sio_top_jtagid_lo >> 12) & 0xFF)); | |
| status = -EINVAL; | |
| goto error2; | |
| } | |
| pr_info("detected a drx-39%02xk, spin %s, xtal %d.%03d MHz\n", | |
| ((sio_top_jtagid_lo >> 12) & 0xFF), spin, | |
| state->m_osc_clock_freq / 1000, | |
| state->m_osc_clock_freq % 1000); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| error2: | |
| return status; | |
| } | |
| static int hi_command(struct drxk_state *state, u16 cmd, u16 *p_result) | |
| { | |
| int status; | |
| bool powerdown_cmd; | |
| dprintk(1, "\n"); | |
| /* Write command */ | |
| status = write16(state, SIO_HI_RA_RAM_CMD__A, cmd); | |
| if (status < 0) | |
| goto error; | |
| if (cmd == SIO_HI_RA_RAM_CMD_RESET) | |
| usleep_range(1000, 2000); | |
| powerdown_cmd = | |
| (bool) ((cmd == SIO_HI_RA_RAM_CMD_CONFIG) && | |
| ((state->m_hi_cfg_ctrl) & | |
| SIO_HI_RA_RAM_PAR_5_CFG_SLEEP__M) == | |
| SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ); | |
| if (!powerdown_cmd) { | |
| /* Wait until command rdy */ | |
| u32 retry_count = 0; | |
| u16 wait_cmd; | |
| do { | |
| usleep_range(1000, 2000); | |
| retry_count += 1; | |
| status = read16(state, SIO_HI_RA_RAM_CMD__A, | |
| &wait_cmd); | |
| } while ((status < 0) && (retry_count < DRXK_MAX_RETRIES) | |
| && (wait_cmd != 0)); | |
| if (status < 0) | |
| goto error; | |
| status = read16(state, SIO_HI_RA_RAM_RES__A, p_result); | |
| } | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int hi_cfg_command(struct drxk_state *state) | |
| { | |
| int status; | |
| dprintk(1, "\n"); | |
| mutex_lock(&state->mutex); | |
| status = write16(state, SIO_HI_RA_RAM_PAR_6__A, | |
| state->m_hi_cfg_timeout); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_HI_RA_RAM_PAR_5__A, | |
| state->m_hi_cfg_ctrl); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_HI_RA_RAM_PAR_4__A, | |
| state->m_hi_cfg_wake_up_key); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_HI_RA_RAM_PAR_3__A, | |
| state->m_hi_cfg_bridge_delay); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_HI_RA_RAM_PAR_2__A, | |
| state->m_hi_cfg_timing_div); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_HI_RA_RAM_PAR_1__A, | |
| SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY); | |
| if (status < 0) | |
| goto error; | |
| status = hi_command(state, SIO_HI_RA_RAM_CMD_CONFIG, NULL); | |
| if (status < 0) | |
| goto error; | |
| state->m_hi_cfg_ctrl &= ~SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ; | |
| error: | |
| mutex_unlock(&state->mutex); | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int init_hi(struct drxk_state *state) | |
| { | |
| dprintk(1, "\n"); | |
| state->m_hi_cfg_wake_up_key = (state->demod_address << 1); | |
| state->m_hi_cfg_timeout = 0x96FF; | |
| /* port/bridge/power down ctrl */ | |
| state->m_hi_cfg_ctrl = SIO_HI_RA_RAM_PAR_5_CFG_SLV0_SLAVE; | |
| return hi_cfg_command(state); | |
| } | |
| static int mpegts_configure_pins(struct drxk_state *state, bool mpeg_enable) | |
| { | |
| int status = -1; | |
| u16 sio_pdr_mclk_cfg = 0; | |
| u16 sio_pdr_mdx_cfg = 0; | |
| u16 err_cfg = 0; | |
| dprintk(1, ": mpeg %s, %s mode\n", | |
| mpeg_enable ? "enable" : "disable", | |
| state->m_enable_parallel ? "parallel" : "serial"); | |
| /* stop lock indicator process */ | |
| status = write16(state, SCU_RAM_GPIO__A, | |
| SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); | |
| if (status < 0) | |
| goto error; | |
| /* MPEG TS pad configuration */ | |
| status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY); | |
| if (status < 0) | |
| goto error; | |
| if (!mpeg_enable) { | |
| /* Set MPEG TS pads to inputmode */ | |
| status = write16(state, SIO_PDR_MSTRT_CFG__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MERR_CFG__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MCLK_CFG__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MVAL_CFG__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD0_CFG__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD1_CFG__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD2_CFG__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD3_CFG__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD4_CFG__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD5_CFG__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD6_CFG__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD7_CFG__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| } else { | |
| /* Enable MPEG output */ | |
| sio_pdr_mdx_cfg = | |
| ((state->m_ts_data_strength << | |
| SIO_PDR_MD0_CFG_DRIVE__B) | 0x0003); | |
| sio_pdr_mclk_cfg = ((state->m_ts_clockk_strength << | |
| SIO_PDR_MCLK_CFG_DRIVE__B) | | |
| 0x0003); | |
| status = write16(state, SIO_PDR_MSTRT_CFG__A, sio_pdr_mdx_cfg); | |
| if (status < 0) | |
| goto error; | |
| if (state->enable_merr_cfg) | |
| err_cfg = sio_pdr_mdx_cfg; | |
| status = write16(state, SIO_PDR_MERR_CFG__A, err_cfg); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MVAL_CFG__A, err_cfg); | |
| if (status < 0) | |
| goto error; | |
| if (state->m_enable_parallel) { | |
| /* parallel -> enable MD1 to MD7 */ | |
| status = write16(state, SIO_PDR_MD1_CFG__A, | |
| sio_pdr_mdx_cfg); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD2_CFG__A, | |
| sio_pdr_mdx_cfg); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD3_CFG__A, | |
| sio_pdr_mdx_cfg); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD4_CFG__A, | |
| sio_pdr_mdx_cfg); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD5_CFG__A, | |
| sio_pdr_mdx_cfg); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD6_CFG__A, | |
| sio_pdr_mdx_cfg); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD7_CFG__A, | |
| sio_pdr_mdx_cfg); | |
| if (status < 0) | |
| goto error; | |
| } else { | |
| sio_pdr_mdx_cfg = ((state->m_ts_data_strength << | |
| SIO_PDR_MD0_CFG_DRIVE__B) | |
| | 0x0003); | |
| /* serial -> disable MD1 to MD7 */ | |
| status = write16(state, SIO_PDR_MD1_CFG__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD2_CFG__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD3_CFG__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD4_CFG__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD5_CFG__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD6_CFG__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD7_CFG__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| } | |
| status = write16(state, SIO_PDR_MCLK_CFG__A, sio_pdr_mclk_cfg); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_PDR_MD0_CFG__A, sio_pdr_mdx_cfg); | |
| if (status < 0) | |
| goto error; | |
| } | |
| /* Enable MB output over MPEG pads and ctl input */ | |
| status = write16(state, SIO_PDR_MON_CFG__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| /* Write nomagic word to enable pdr reg write */ | |
| status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int mpegts_disable(struct drxk_state *state) | |
| { | |
| dprintk(1, "\n"); | |
| return mpegts_configure_pins(state, false); | |
| } | |
| static int bl_chain_cmd(struct drxk_state *state, | |
| u16 rom_offset, u16 nr_of_elements, u32 time_out) | |
| { | |
| u16 bl_status = 0; | |
| int status; | |
| unsigned long end; | |
| dprintk(1, "\n"); | |
| mutex_lock(&state->mutex); | |
| status = write16(state, SIO_BL_MODE__A, SIO_BL_MODE_CHAIN); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_BL_CHAIN_ADDR__A, rom_offset); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_BL_CHAIN_LEN__A, nr_of_elements); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_BL_ENABLE__A, SIO_BL_ENABLE_ON); | |
| if (status < 0) | |
| goto error; | |
| end = jiffies + msecs_to_jiffies(time_out); | |
| do { | |
| usleep_range(1000, 2000); | |
| status = read16(state, SIO_BL_STATUS__A, &bl_status); | |
| if (status < 0) | |
| goto error; | |
| } while ((bl_status == 0x1) && | |
| ((time_is_after_jiffies(end)))); | |
| if (bl_status == 0x1) { | |
| pr_err("SIO not ready\n"); | |
| status = -EINVAL; | |
| goto error2; | |
| } | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| error2: | |
| mutex_unlock(&state->mutex); | |
| return status; | |
| } | |
| static int download_microcode(struct drxk_state *state, | |
| const u8 p_mc_image[], u32 length) | |
| { | |
| const u8 *p_src = p_mc_image; | |
| u32 address; | |
| u16 n_blocks; | |
| u16 block_size; | |
| u32 offset = 0; | |
| u32 i; | |
| int status = 0; | |
| dprintk(1, "\n"); | |
| /* down the drain (we don't care about MAGIC_WORD) */ | |
| #if 0 | |
| /* For future reference */ | |
| drain = (p_src[0] << 8) | p_src[1]; | |
| #endif | |
| p_src += sizeof(u16); | |
| offset += sizeof(u16); | |
| n_blocks = (p_src[0] << 8) | p_src[1]; | |
| p_src += sizeof(u16); | |
| offset += sizeof(u16); | |
| for (i = 0; i < n_blocks; i += 1) { | |
| address = (p_src[0] << 24) | (p_src[1] << 16) | | |
| (p_src[2] << 8) | p_src[3]; | |
| p_src += sizeof(u32); | |
| offset += sizeof(u32); | |
| block_size = ((p_src[0] << 8) | p_src[1]) * sizeof(u16); | |
| p_src += sizeof(u16); | |
| offset += sizeof(u16); | |
| #if 0 | |
| /* For future reference */ | |
| flags = (p_src[0] << 8) | p_src[1]; | |
| #endif | |
| p_src += sizeof(u16); | |
| offset += sizeof(u16); | |
| #if 0 | |
| /* For future reference */ | |
| block_crc = (p_src[0] << 8) | p_src[1]; | |
| #endif | |
| p_src += sizeof(u16); | |
| offset += sizeof(u16); | |
| if (offset + block_size > length) { | |
| pr_err("Firmware is corrupted.\n"); | |
| return -EINVAL; | |
| } | |
| status = write_block(state, address, block_size, p_src); | |
| if (status < 0) { | |
| pr_err("Error %d while loading firmware\n", status); | |
| break; | |
| } | |
| p_src += block_size; | |
| offset += block_size; | |
| } | |
| return status; | |
| } | |
| static int dvbt_enable_ofdm_token_ring(struct drxk_state *state, bool enable) | |
| { | |
| int status; | |
| u16 data = 0; | |
| u16 desired_ctrl = SIO_OFDM_SH_OFDM_RING_ENABLE_ON; | |
| u16 desired_status = SIO_OFDM_SH_OFDM_RING_STATUS_ENABLED; | |
| unsigned long end; | |
| dprintk(1, "\n"); | |
| if (!enable) { | |
| desired_ctrl = SIO_OFDM_SH_OFDM_RING_ENABLE_OFF; | |
| desired_status = SIO_OFDM_SH_OFDM_RING_STATUS_DOWN; | |
| } | |
| status = read16(state, SIO_OFDM_SH_OFDM_RING_STATUS__A, &data); | |
| if (status >= 0 && data == desired_status) { | |
| /* tokenring already has correct status */ | |
| return status; | |
| } | |
| /* Disable/enable dvbt tokenring bridge */ | |
| status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, desired_ctrl); | |
| end = jiffies + msecs_to_jiffies(DRXK_OFDM_TR_SHUTDOWN_TIMEOUT); | |
| do { | |
| status = read16(state, SIO_OFDM_SH_OFDM_RING_STATUS__A, &data); | |
| if ((status >= 0 && data == desired_status) | |
| || time_is_after_jiffies(end)) | |
| break; | |
| usleep_range(1000, 2000); | |
| } while (1); | |
| if (data != desired_status) { | |
| pr_err("SIO not ready\n"); | |
| return -EINVAL; | |
| } | |
| return status; | |
| } | |
| static int mpegts_stop(struct drxk_state *state) | |
| { | |
| int status = 0; | |
| u16 fec_oc_snc_mode = 0; | |
| u16 fec_oc_ipr_mode = 0; | |
| dprintk(1, "\n"); | |
| /* Graceful shutdown (byte boundaries) */ | |
| status = read16(state, FEC_OC_SNC_MODE__A, &fec_oc_snc_mode); | |
| if (status < 0) | |
| goto error; | |
| fec_oc_snc_mode |= FEC_OC_SNC_MODE_SHUTDOWN__M; | |
| status = write16(state, FEC_OC_SNC_MODE__A, fec_oc_snc_mode); | |
| if (status < 0) | |
| goto error; | |
| /* Suppress MCLK during absence of data */ | |
| status = read16(state, FEC_OC_IPR_MODE__A, &fec_oc_ipr_mode); | |
| if (status < 0) | |
| goto error; | |
| fec_oc_ipr_mode |= FEC_OC_IPR_MODE_MCLK_DIS_DAT_ABS__M; | |
| status = write16(state, FEC_OC_IPR_MODE__A, fec_oc_ipr_mode); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int scu_command(struct drxk_state *state, | |
| u16 cmd, u8 parameter_len, | |
| u16 *parameter, u8 result_len, u16 *result) | |
| { | |
| #if (SCU_RAM_PARAM_0__A - SCU_RAM_PARAM_15__A) != 15 | |
| #error DRXK register mapping no longer compatible with this routine! | |
| #endif | |
| u16 cur_cmd = 0; | |
| int status = -EINVAL; | |
| unsigned long end; | |
| u8 buffer[34]; | |
| int cnt = 0, ii; | |
| const char *p; | |
| char errname[30]; | |
| dprintk(1, "\n"); | |
| if ((cmd == 0) || ((parameter_len > 0) && (parameter == NULL)) || | |
| ((result_len > 0) && (result == NULL))) { | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| mutex_lock(&state->mutex); | |
| /* assume that the command register is ready | |
| since it is checked afterwards */ | |
| for (ii = parameter_len - 1; ii >= 0; ii -= 1) { | |
| buffer[cnt++] = (parameter[ii] & 0xFF); | |
| buffer[cnt++] = ((parameter[ii] >> 8) & 0xFF); | |
| } | |
| buffer[cnt++] = (cmd & 0xFF); | |
| buffer[cnt++] = ((cmd >> 8) & 0xFF); | |
| write_block(state, SCU_RAM_PARAM_0__A - | |
| (parameter_len - 1), cnt, buffer); | |
| /* Wait until SCU has processed command */ | |
| end = jiffies + msecs_to_jiffies(DRXK_MAX_WAITTIME); | |
| do { | |
| usleep_range(1000, 2000); | |
| status = read16(state, SCU_RAM_COMMAND__A, &cur_cmd); | |
| if (status < 0) | |
| goto error; | |
| } while (!(cur_cmd == DRX_SCU_READY) && (time_is_after_jiffies(end))); | |
| if (cur_cmd != DRX_SCU_READY) { | |
| pr_err("SCU not ready\n"); | |
| status = -EIO; | |
| goto error2; | |
| } | |
| /* read results */ | |
| if ((result_len > 0) && (result != NULL)) { | |
| s16 err; | |
| int ii; | |
| for (ii = result_len - 1; ii >= 0; ii -= 1) { | |
| status = read16(state, SCU_RAM_PARAM_0__A - ii, | |
| &result[ii]); | |
| if (status < 0) | |
| goto error; | |
| } | |
| /* Check if an error was reported by SCU */ | |
| err = (s16)result[0]; | |
| if (err >= 0) | |
| goto error; | |
| /* check for the known error codes */ | |
| switch (err) { | |
| case SCU_RESULT_UNKCMD: | |
| p = "SCU_RESULT_UNKCMD"; | |
| break; | |
| case SCU_RESULT_UNKSTD: | |
| p = "SCU_RESULT_UNKSTD"; | |
| break; | |
| case SCU_RESULT_SIZE: | |
| p = "SCU_RESULT_SIZE"; | |
| break; | |
| case SCU_RESULT_INVPAR: | |
| p = "SCU_RESULT_INVPAR"; | |
| break; | |
| default: /* Other negative values are errors */ | |
| sprintf(errname, "ERROR: %d\n", err); | |
| p = errname; | |
| } | |
| pr_err("%s while sending cmd 0x%04x with params:", p, cmd); | |
| print_hex_dump_bytes("drxk: ", DUMP_PREFIX_NONE, buffer, cnt); | |
| status = -EINVAL; | |
| goto error2; | |
| } | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| error2: | |
| mutex_unlock(&state->mutex); | |
| return status; | |
| } | |
| static int set_iqm_af(struct drxk_state *state, bool active) | |
| { | |
| u16 data = 0; | |
| int status; | |
| dprintk(1, "\n"); | |
| /* Configure IQM */ | |
| status = read16(state, IQM_AF_STDBY__A, &data); | |
| if (status < 0) | |
| goto error; | |
| if (!active) { | |
| data |= (IQM_AF_STDBY_STDBY_ADC_STANDBY | |
| | IQM_AF_STDBY_STDBY_AMP_STANDBY | |
| | IQM_AF_STDBY_STDBY_PD_STANDBY | |
| | IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY | |
| | IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY); | |
| } else { | |
| data &= ((~IQM_AF_STDBY_STDBY_ADC_STANDBY) | |
| & (~IQM_AF_STDBY_STDBY_AMP_STANDBY) | |
| & (~IQM_AF_STDBY_STDBY_PD_STANDBY) | |
| & (~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY) | |
| & (~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY) | |
| ); | |
| } | |
| status = write16(state, IQM_AF_STDBY__A, data); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int ctrl_power_mode(struct drxk_state *state, enum drx_power_mode *mode) | |
| { | |
| int status = 0; | |
| u16 sio_cc_pwd_mode = 0; | |
| dprintk(1, "\n"); | |
| /* Check arguments */ | |
| if (mode == NULL) | |
| return -EINVAL; | |
| switch (*mode) { | |
| case DRX_POWER_UP: | |
| sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_NONE; | |
| break; | |
| case DRXK_POWER_DOWN_OFDM: | |
| sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_OFDM; | |
| break; | |
| case DRXK_POWER_DOWN_CORE: | |
| sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_CLOCK; | |
| break; | |
| case DRXK_POWER_DOWN_PLL: | |
| sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_PLL; | |
| break; | |
| case DRX_POWER_DOWN: | |
| sio_cc_pwd_mode = SIO_CC_PWD_MODE_LEVEL_OSC; | |
| break; | |
| default: | |
| /* Unknow sleep mode */ | |
| return -EINVAL; | |
| } | |
| /* If already in requested power mode, do nothing */ | |
| if (state->m_current_power_mode == *mode) | |
| return 0; | |
| /* For next steps make sure to start from DRX_POWER_UP mode */ | |
| if (state->m_current_power_mode != DRX_POWER_UP) { | |
| status = power_up_device(state); | |
| if (status < 0) | |
| goto error; | |
| status = dvbt_enable_ofdm_token_ring(state, true); | |
| if (status < 0) | |
| goto error; | |
| } | |
| if (*mode == DRX_POWER_UP) { | |
| /* Restore analog & pin configuration */ | |
| } else { | |
| /* Power down to requested mode */ | |
| /* Backup some register settings */ | |
| /* Set pins with possible pull-ups connected | |
| to them in input mode */ | |
| /* Analog power down */ | |
| /* ADC power down */ | |
| /* Power down device */ | |
| /* stop all comm_exec */ | |
| /* Stop and power down previous standard */ | |
| switch (state->m_operation_mode) { | |
| case OM_DVBT: | |
| status = mpegts_stop(state); | |
| if (status < 0) | |
| goto error; | |
| status = power_down_dvbt(state, false); | |
| if (status < 0) | |
| goto error; | |
| break; | |
| case OM_QAM_ITU_A: | |
| case OM_QAM_ITU_C: | |
| status = mpegts_stop(state); | |
| if (status < 0) | |
| goto error; | |
| status = power_down_qam(state); | |
| if (status < 0) | |
| goto error; | |
| break; | |
| default: | |
| break; | |
| } | |
| status = dvbt_enable_ofdm_token_ring(state, false); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_CC_PWD_MODE__A, sio_cc_pwd_mode); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY); | |
| if (status < 0) | |
| goto error; | |
| if (*mode != DRXK_POWER_DOWN_OFDM) { | |
| state->m_hi_cfg_ctrl |= | |
| SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ; | |
| status = hi_cfg_command(state); | |
| if (status < 0) | |
| goto error; | |
| } | |
| } | |
| state->m_current_power_mode = *mode; | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int power_down_dvbt(struct drxk_state *state, bool set_power_mode) | |
| { | |
| enum drx_power_mode power_mode = DRXK_POWER_DOWN_OFDM; | |
| u16 cmd_result = 0; | |
| u16 data = 0; | |
| int status; | |
| dprintk(1, "\n"); | |
| status = read16(state, SCU_COMM_EXEC__A, &data); | |
| if (status < 0) | |
| goto error; | |
| if (data == SCU_COMM_EXEC_ACTIVE) { | |
| /* Send OFDM stop command */ | |
| status = scu_command(state, | |
| SCU_RAM_COMMAND_STANDARD_OFDM | |
| | SCU_RAM_COMMAND_CMD_DEMOD_STOP, | |
| 0, NULL, 1, &cmd_result); | |
| if (status < 0) | |
| goto error; | |
| /* Send OFDM reset command */ | |
| status = scu_command(state, | |
| SCU_RAM_COMMAND_STANDARD_OFDM | |
| | SCU_RAM_COMMAND_CMD_DEMOD_RESET, | |
| 0, NULL, 1, &cmd_result); | |
| if (status < 0) | |
| goto error; | |
| } | |
| /* Reset datapath for OFDM, processors first */ | |
| status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP); | |
| if (status < 0) | |
| goto error; | |
| /* powerdown AFE */ | |
| status = set_iqm_af(state, false); | |
| if (status < 0) | |
| goto error; | |
| /* powerdown to OFDM mode */ | |
| if (set_power_mode) { | |
| status = ctrl_power_mode(state, &power_mode); | |
| if (status < 0) | |
| goto error; | |
| } | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int setoperation_mode(struct drxk_state *state, | |
| enum operation_mode o_mode) | |
| { | |
| int status = 0; | |
| dprintk(1, "\n"); | |
| /* | |
| Stop and power down previous standard | |
| TODO investigate total power down instead of partial | |
| power down depending on "previous" standard. | |
| */ | |
| /* disable HW lock indicator */ | |
| status = write16(state, SCU_RAM_GPIO__A, | |
| SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); | |
| if (status < 0) | |
| goto error; | |
| /* Device is already at the required mode */ | |
| if (state->m_operation_mode == o_mode) | |
| return 0; | |
| switch (state->m_operation_mode) { | |
| /* OM_NONE was added for start up */ | |
| case OM_NONE: | |
| break; | |
| case OM_DVBT: | |
| status = mpegts_stop(state); | |
| if (status < 0) | |
| goto error; | |
| status = power_down_dvbt(state, true); | |
| if (status < 0) | |
| goto error; | |
| state->m_operation_mode = OM_NONE; | |
| break; | |
| case OM_QAM_ITU_A: /* fallthrough */ | |
| case OM_QAM_ITU_C: | |
| status = mpegts_stop(state); | |
| if (status < 0) | |
| goto error; | |
| status = power_down_qam(state); | |
| if (status < 0) | |
| goto error; | |
| state->m_operation_mode = OM_NONE; | |
| break; | |
| case OM_QAM_ITU_B: | |
| default: | |
| status = -EINVAL; | |
| goto error; | |
| } | |
| /* | |
| Power up new standard | |
| */ | |
| switch (o_mode) { | |
| case OM_DVBT: | |
| dprintk(1, ": DVB-T\n"); | |
| state->m_operation_mode = o_mode; | |
| status = set_dvbt_standard(state, o_mode); | |
| if (status < 0) | |
| goto error; | |
| break; | |
| case OM_QAM_ITU_A: /* fallthrough */ | |
| case OM_QAM_ITU_C: | |
| dprintk(1, ": DVB-C Annex %c\n", | |
| (state->m_operation_mode == OM_QAM_ITU_A) ? 'A' : 'C'); | |
| state->m_operation_mode = o_mode; | |
| status = set_qam_standard(state, o_mode); | |
| if (status < 0) | |
| goto error; | |
| break; | |
| case OM_QAM_ITU_B: | |
| default: | |
| status = -EINVAL; | |
| } | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int start(struct drxk_state *state, s32 offset_freq, | |
| s32 intermediate_frequency) | |
| { | |
| int status = -EINVAL; | |
| u16 i_freqk_hz; | |
| s32 offsetk_hz = offset_freq / 1000; | |
| dprintk(1, "\n"); | |
| if (state->m_drxk_state != DRXK_STOPPED && | |
| state->m_drxk_state != DRXK_DTV_STARTED) | |
| goto error; | |
| state->m_b_mirror_freq_spect = (state->props.inversion == INVERSION_ON); | |
| if (intermediate_frequency < 0) { | |
| state->m_b_mirror_freq_spect = !state->m_b_mirror_freq_spect; | |
| intermediate_frequency = -intermediate_frequency; | |
| } | |
| switch (state->m_operation_mode) { | |
| case OM_QAM_ITU_A: | |
| case OM_QAM_ITU_C: | |
| i_freqk_hz = (intermediate_frequency / 1000); | |
| status = set_qam(state, i_freqk_hz, offsetk_hz); | |
| if (status < 0) | |
| goto error; | |
| state->m_drxk_state = DRXK_DTV_STARTED; | |
| break; | |
| case OM_DVBT: | |
| i_freqk_hz = (intermediate_frequency / 1000); | |
| status = mpegts_stop(state); | |
| if (status < 0) | |
| goto error; | |
| status = set_dvbt(state, i_freqk_hz, offsetk_hz); | |
| if (status < 0) | |
| goto error; | |
| status = dvbt_start(state); | |
| if (status < 0) | |
| goto error; | |
| state->m_drxk_state = DRXK_DTV_STARTED; | |
| break; | |
| default: | |
| break; | |
| } | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int shut_down(struct drxk_state *state) | |
| { | |
| dprintk(1, "\n"); | |
| mpegts_stop(state); | |
| return 0; | |
| } | |
| static int get_lock_status(struct drxk_state *state, u32 *p_lock_status) | |
| { | |
| int status = -EINVAL; | |
| dprintk(1, "\n"); | |
| if (p_lock_status == NULL) | |
| goto error; | |
| *p_lock_status = NOT_LOCKED; | |
| /* define the SCU command code */ | |
| switch (state->m_operation_mode) { | |
| case OM_QAM_ITU_A: | |
| case OM_QAM_ITU_B: | |
| case OM_QAM_ITU_C: | |
| status = get_qam_lock_status(state, p_lock_status); | |
| break; | |
| case OM_DVBT: | |
| status = get_dvbt_lock_status(state, p_lock_status); | |
| break; | |
| default: | |
| pr_debug("Unsupported operation mode %d in %s\n", | |
| state->m_operation_mode, __func__); | |
| return 0; | |
| } | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int mpegts_start(struct drxk_state *state) | |
| { | |
| int status; | |
| u16 fec_oc_snc_mode = 0; | |
| /* Allow OC to sync again */ | |
| status = read16(state, FEC_OC_SNC_MODE__A, &fec_oc_snc_mode); | |
| if (status < 0) | |
| goto error; | |
| fec_oc_snc_mode &= ~FEC_OC_SNC_MODE_SHUTDOWN__M; | |
| status = write16(state, FEC_OC_SNC_MODE__A, fec_oc_snc_mode); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_OC_SNC_UNLOCK__A, 1); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int mpegts_dto_init(struct drxk_state *state) | |
| { | |
| int status; | |
| dprintk(1, "\n"); | |
| /* Rate integration settings */ | |
| status = write16(state, FEC_OC_RCN_CTL_STEP_LO__A, 0x0000); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_OC_RCN_CTL_STEP_HI__A, 0x000C); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_OC_RCN_GAIN__A, 0x000A); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_OC_AVR_PARM_A__A, 0x0008); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_OC_AVR_PARM_B__A, 0x0006); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_OC_TMD_HI_MARGIN__A, 0x0680); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_OC_TMD_LO_MARGIN__A, 0x0080); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_OC_TMD_COUNT__A, 0x03F4); | |
| if (status < 0) | |
| goto error; | |
| /* Additional configuration */ | |
| status = write16(state, FEC_OC_OCR_INVERT__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_OC_SNC_LWM__A, 2); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_OC_SNC_HWM__A, 12); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int mpegts_dto_setup(struct drxk_state *state, | |
| enum operation_mode o_mode) | |
| { | |
| int status; | |
| u16 fec_oc_reg_mode = 0; /* FEC_OC_MODE register value */ | |
| u16 fec_oc_reg_ipr_mode = 0; /* FEC_OC_IPR_MODE register value */ | |
| u16 fec_oc_dto_mode = 0; /* FEC_OC_IPR_INVERT register value */ | |
| u16 fec_oc_fct_mode = 0; /* FEC_OC_IPR_INVERT register value */ | |
| u16 fec_oc_dto_period = 2; /* FEC_OC_IPR_INVERT register value */ | |
| u16 fec_oc_dto_burst_len = 188; /* FEC_OC_IPR_INVERT register value */ | |
| u32 fec_oc_rcn_ctl_rate = 0; /* FEC_OC_IPR_INVERT register value */ | |
| u16 fec_oc_tmd_mode = 0; | |
| u16 fec_oc_tmd_int_upd_rate = 0; | |
| u32 max_bit_rate = 0; | |
| bool static_clk = false; | |
| dprintk(1, "\n"); | |
| /* Check insertion of the Reed-Solomon parity bytes */ | |
| status = read16(state, FEC_OC_MODE__A, &fec_oc_reg_mode); | |
| if (status < 0) | |
| goto error; | |
| status = read16(state, FEC_OC_IPR_MODE__A, &fec_oc_reg_ipr_mode); | |
| if (status < 0) | |
| goto error; | |
| fec_oc_reg_mode &= (~FEC_OC_MODE_PARITY__M); | |
| fec_oc_reg_ipr_mode &= (~FEC_OC_IPR_MODE_MVAL_DIS_PAR__M); | |
| if (state->m_insert_rs_byte) { | |
| /* enable parity symbol forward */ | |
| fec_oc_reg_mode |= FEC_OC_MODE_PARITY__M; | |
| /* MVAL disable during parity bytes */ | |
| fec_oc_reg_ipr_mode |= FEC_OC_IPR_MODE_MVAL_DIS_PAR__M; | |
| /* TS burst length to 204 */ | |
| fec_oc_dto_burst_len = 204; | |
| } | |
| /* Check serial or parallel output */ | |
| fec_oc_reg_ipr_mode &= (~(FEC_OC_IPR_MODE_SERIAL__M)); | |
| if (!state->m_enable_parallel) { | |
| /* MPEG data output is serial -> set ipr_mode[0] */ | |
| fec_oc_reg_ipr_mode |= FEC_OC_IPR_MODE_SERIAL__M; | |
| } | |
| switch (o_mode) { | |
| case OM_DVBT: | |
| max_bit_rate = state->m_dvbt_bitrate; | |
| fec_oc_tmd_mode = 3; | |
| fec_oc_rcn_ctl_rate = 0xC00000; | |
| static_clk = state->m_dvbt_static_clk; | |
| break; | |
| case OM_QAM_ITU_A: /* fallthrough */ | |
| case OM_QAM_ITU_C: | |
| fec_oc_tmd_mode = 0x0004; | |
| fec_oc_rcn_ctl_rate = 0xD2B4EE; /* good for >63 Mb/s */ | |
| max_bit_rate = state->m_dvbc_bitrate; | |
| static_clk = state->m_dvbc_static_clk; | |
| break; | |
| default: | |
| status = -EINVAL; | |
| } /* switch (standard) */ | |
| if (status < 0) | |
| goto error; | |
| /* Configure DTO's */ | |
| if (static_clk) { | |
| u32 bit_rate = 0; | |
| /* Rational DTO for MCLK source (static MCLK rate), | |
| Dynamic DTO for optimal grouping | |
| (avoid intra-packet gaps), | |
| DTO offset enable to sync TS burst with MSTRT */ | |
| fec_oc_dto_mode = (FEC_OC_DTO_MODE_DYNAMIC__M | | |
| FEC_OC_DTO_MODE_OFFSET_ENABLE__M); | |
| fec_oc_fct_mode = (FEC_OC_FCT_MODE_RAT_ENA__M | | |
| FEC_OC_FCT_MODE_VIRT_ENA__M); | |
| /* Check user defined bitrate */ | |
| bit_rate = max_bit_rate; | |
| if (bit_rate > 75900000UL) { /* max is 75.9 Mb/s */ | |
| bit_rate = 75900000UL; | |
| } | |
| /* Rational DTO period: | |
| dto_period = (Fsys / bitrate) - 2 | |
| result should be floored, | |
| to make sure >= requested bitrate | |
| */ | |
| fec_oc_dto_period = (u16) (((state->m_sys_clock_freq) | |
| * 1000) / bit_rate); | |
| if (fec_oc_dto_period <= 2) | |
| fec_oc_dto_period = 0; | |
| else | |
| fec_oc_dto_period -= 2; | |
| fec_oc_tmd_int_upd_rate = 8; | |
| } else { | |
| /* (commonAttr->static_clk == false) => dynamic mode */ | |
| fec_oc_dto_mode = FEC_OC_DTO_MODE_DYNAMIC__M; | |
| fec_oc_fct_mode = FEC_OC_FCT_MODE__PRE; | |
| fec_oc_tmd_int_upd_rate = 5; | |
| } | |
| /* Write appropriate registers with requested configuration */ | |
| status = write16(state, FEC_OC_DTO_BURST_LEN__A, fec_oc_dto_burst_len); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_OC_DTO_PERIOD__A, fec_oc_dto_period); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_OC_DTO_MODE__A, fec_oc_dto_mode); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_OC_FCT_MODE__A, fec_oc_fct_mode); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_OC_MODE__A, fec_oc_reg_mode); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_OC_IPR_MODE__A, fec_oc_reg_ipr_mode); | |
| if (status < 0) | |
| goto error; | |
| /* Rate integration settings */ | |
| status = write32(state, FEC_OC_RCN_CTL_RATE_LO__A, fec_oc_rcn_ctl_rate); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_OC_TMD_INT_UPD_RATE__A, | |
| fec_oc_tmd_int_upd_rate); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_OC_TMD_MODE__A, fec_oc_tmd_mode); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int mpegts_configure_polarity(struct drxk_state *state) | |
| { | |
| u16 fec_oc_reg_ipr_invert = 0; | |
| /* Data mask for the output data byte */ | |
| u16 invert_data_mask = | |
| FEC_OC_IPR_INVERT_MD7__M | FEC_OC_IPR_INVERT_MD6__M | | |
| FEC_OC_IPR_INVERT_MD5__M | FEC_OC_IPR_INVERT_MD4__M | | |
| FEC_OC_IPR_INVERT_MD3__M | FEC_OC_IPR_INVERT_MD2__M | | |
| FEC_OC_IPR_INVERT_MD1__M | FEC_OC_IPR_INVERT_MD0__M; | |
| dprintk(1, "\n"); | |
| /* Control selective inversion of output bits */ | |
| fec_oc_reg_ipr_invert &= (~(invert_data_mask)); | |
| if (state->m_invert_data) | |
| fec_oc_reg_ipr_invert |= invert_data_mask; | |
| fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MERR__M)); | |
| if (state->m_invert_err) | |
| fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MERR__M; | |
| fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MSTRT__M)); | |
| if (state->m_invert_str) | |
| fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MSTRT__M; | |
| fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MVAL__M)); | |
| if (state->m_invert_val) | |
| fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MVAL__M; | |
| fec_oc_reg_ipr_invert &= (~(FEC_OC_IPR_INVERT_MCLK__M)); | |
| if (state->m_invert_clk) | |
| fec_oc_reg_ipr_invert |= FEC_OC_IPR_INVERT_MCLK__M; | |
| return write16(state, FEC_OC_IPR_INVERT__A, fec_oc_reg_ipr_invert); | |
| } | |
| #define SCU_RAM_AGC_KI_INV_RF_POL__M 0x4000 | |
| static int set_agc_rf(struct drxk_state *state, | |
| struct s_cfg_agc *p_agc_cfg, bool is_dtv) | |
| { | |
| int status = -EINVAL; | |
| u16 data = 0; | |
| struct s_cfg_agc *p_if_agc_settings; | |
| dprintk(1, "\n"); | |
| if (p_agc_cfg == NULL) | |
| goto error; | |
| switch (p_agc_cfg->ctrl_mode) { | |
| case DRXK_AGC_CTRL_AUTO: | |
| /* Enable RF AGC DAC */ | |
| status = read16(state, IQM_AF_STDBY__A, &data); | |
| if (status < 0) | |
| goto error; | |
| data &= ~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY; | |
| status = write16(state, IQM_AF_STDBY__A, data); | |
| if (status < 0) | |
| goto error; | |
| status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); | |
| if (status < 0) | |
| goto error; | |
| /* Enable SCU RF AGC loop */ | |
| data &= ~SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M; | |
| /* Polarity */ | |
| if (state->m_rf_agc_pol) | |
| data |= SCU_RAM_AGC_CONFIG_INV_RF_POL__M; | |
| else | |
| data &= ~SCU_RAM_AGC_CONFIG_INV_RF_POL__M; | |
| status = write16(state, SCU_RAM_AGC_CONFIG__A, data); | |
| if (status < 0) | |
| goto error; | |
| /* Set speed (using complementary reduction value) */ | |
| status = read16(state, SCU_RAM_AGC_KI_RED__A, &data); | |
| if (status < 0) | |
| goto error; | |
| data &= ~SCU_RAM_AGC_KI_RED_RAGC_RED__M; | |
| data |= (~(p_agc_cfg->speed << | |
| SCU_RAM_AGC_KI_RED_RAGC_RED__B) | |
| & SCU_RAM_AGC_KI_RED_RAGC_RED__M); | |
| status = write16(state, SCU_RAM_AGC_KI_RED__A, data); | |
| if (status < 0) | |
| goto error; | |
| if (is_dvbt(state)) | |
| p_if_agc_settings = &state->m_dvbt_if_agc_cfg; | |
| else if (is_qam(state)) | |
| p_if_agc_settings = &state->m_qam_if_agc_cfg; | |
| else | |
| p_if_agc_settings = &state->m_atv_if_agc_cfg; | |
| if (p_if_agc_settings == NULL) { | |
| status = -EINVAL; | |
| goto error; | |
| } | |
| /* Set TOP, only if IF-AGC is in AUTO mode */ | |
| if (p_if_agc_settings->ctrl_mode == DRXK_AGC_CTRL_AUTO) { | |
| status = write16(state, | |
| SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, | |
| p_agc_cfg->top); | |
| if (status < 0) | |
| goto error; | |
| } | |
| /* Cut-Off current */ | |
| status = write16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, | |
| p_agc_cfg->cut_off_current); | |
| if (status < 0) | |
| goto error; | |
| /* Max. output level */ | |
| status = write16(state, SCU_RAM_AGC_RF_MAX__A, | |
| p_agc_cfg->max_output_level); | |
| if (status < 0) | |
| goto error; | |
| break; | |
| case DRXK_AGC_CTRL_USER: | |
| /* Enable RF AGC DAC */ | |
| status = read16(state, IQM_AF_STDBY__A, &data); | |
| if (status < 0) | |
| goto error; | |
| data &= ~IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY; | |
| status = write16(state, IQM_AF_STDBY__A, data); | |
| if (status < 0) | |
| goto error; | |
| /* Disable SCU RF AGC loop */ | |
| status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); | |
| if (status < 0) | |
| goto error; | |
| data |= SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M; | |
| if (state->m_rf_agc_pol) | |
| data |= SCU_RAM_AGC_CONFIG_INV_RF_POL__M; | |
| else | |
| data &= ~SCU_RAM_AGC_CONFIG_INV_RF_POL__M; | |
| status = write16(state, SCU_RAM_AGC_CONFIG__A, data); | |
| if (status < 0) | |
| goto error; | |
| /* SCU c.o.c. to 0, enabling full control range */ | |
| status = write16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, 0); | |
| if (status < 0) | |
| goto error; | |
| /* Write value to output pin */ | |
| status = write16(state, SCU_RAM_AGC_RF_IACCU_HI__A, | |
| p_agc_cfg->output_level); | |
| if (status < 0) | |
| goto error; | |
| break; | |
| case DRXK_AGC_CTRL_OFF: | |
| /* Disable RF AGC DAC */ | |
| status = read16(state, IQM_AF_STDBY__A, &data); | |
| if (status < 0) | |
| goto error; | |
| data |= IQM_AF_STDBY_STDBY_TAGC_RF_STANDBY; | |
| status = write16(state, IQM_AF_STDBY__A, data); | |
| if (status < 0) | |
| goto error; | |
| /* Disable SCU RF AGC loop */ | |
| status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); | |
| if (status < 0) | |
| goto error; | |
| data |= SCU_RAM_AGC_CONFIG_DISABLE_RF_AGC__M; | |
| status = write16(state, SCU_RAM_AGC_CONFIG__A, data); | |
| if (status < 0) | |
| goto error; | |
| break; | |
| default: | |
| status = -EINVAL; | |
| } | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| #define SCU_RAM_AGC_KI_INV_IF_POL__M 0x2000 | |
| static int set_agc_if(struct drxk_state *state, | |
| struct s_cfg_agc *p_agc_cfg, bool is_dtv) | |
| { | |
| u16 data = 0; | |
| int status = 0; | |
| struct s_cfg_agc *p_rf_agc_settings; | |
| dprintk(1, "\n"); | |
| switch (p_agc_cfg->ctrl_mode) { | |
| case DRXK_AGC_CTRL_AUTO: | |
| /* Enable IF AGC DAC */ | |
| status = read16(state, IQM_AF_STDBY__A, &data); | |
| if (status < 0) | |
| goto error; | |
| data &= ~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY; | |
| status = write16(state, IQM_AF_STDBY__A, data); | |
| if (status < 0) | |
| goto error; | |
| status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); | |
| if (status < 0) | |
| goto error; | |
| /* Enable SCU IF AGC loop */ | |
| data &= ~SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M; | |
| /* Polarity */ | |
| if (state->m_if_agc_pol) | |
| data |= SCU_RAM_AGC_CONFIG_INV_IF_POL__M; | |
| else | |
| data &= ~SCU_RAM_AGC_CONFIG_INV_IF_POL__M; | |
| status = write16(state, SCU_RAM_AGC_CONFIG__A, data); | |
| if (status < 0) | |
| goto error; | |
| /* Set speed (using complementary reduction value) */ | |
| status = read16(state, SCU_RAM_AGC_KI_RED__A, &data); | |
| if (status < 0) | |
| goto error; | |
| data &= ~SCU_RAM_AGC_KI_RED_IAGC_RED__M; | |
| data |= (~(p_agc_cfg->speed << | |
| SCU_RAM_AGC_KI_RED_IAGC_RED__B) | |
| & SCU_RAM_AGC_KI_RED_IAGC_RED__M); | |
| status = write16(state, SCU_RAM_AGC_KI_RED__A, data); | |
| if (status < 0) | |
| goto error; | |
| if (is_qam(state)) | |
| p_rf_agc_settings = &state->m_qam_rf_agc_cfg; | |
| else | |
| p_rf_agc_settings = &state->m_atv_rf_agc_cfg; | |
| if (p_rf_agc_settings == NULL) | |
| return -1; | |
| /* Restore TOP */ | |
| status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, | |
| p_rf_agc_settings->top); | |
| if (status < 0) | |
| goto error; | |
| break; | |
| case DRXK_AGC_CTRL_USER: | |
| /* Enable IF AGC DAC */ | |
| status = read16(state, IQM_AF_STDBY__A, &data); | |
| if (status < 0) | |
| goto error; | |
| data &= ~IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY; | |
| status = write16(state, IQM_AF_STDBY__A, data); | |
| if (status < 0) | |
| goto error; | |
| status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); | |
| if (status < 0) | |
| goto error; | |
| /* Disable SCU IF AGC loop */ | |
| data |= SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M; | |
| /* Polarity */ | |
| if (state->m_if_agc_pol) | |
| data |= SCU_RAM_AGC_CONFIG_INV_IF_POL__M; | |
| else | |
| data &= ~SCU_RAM_AGC_CONFIG_INV_IF_POL__M; | |
| status = write16(state, SCU_RAM_AGC_CONFIG__A, data); | |
| if (status < 0) | |
| goto error; | |
| /* Write value to output pin */ | |
| status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, | |
| p_agc_cfg->output_level); | |
| if (status < 0) | |
| goto error; | |
| break; | |
| case DRXK_AGC_CTRL_OFF: | |
| /* Disable If AGC DAC */ | |
| status = read16(state, IQM_AF_STDBY__A, &data); | |
| if (status < 0) | |
| goto error; | |
| data |= IQM_AF_STDBY_STDBY_TAGC_IF_STANDBY; | |
| status = write16(state, IQM_AF_STDBY__A, data); | |
| if (status < 0) | |
| goto error; | |
| /* Disable SCU IF AGC loop */ | |
| status = read16(state, SCU_RAM_AGC_CONFIG__A, &data); | |
| if (status < 0) | |
| goto error; | |
| data |= SCU_RAM_AGC_CONFIG_DISABLE_IF_AGC__M; | |
| status = write16(state, SCU_RAM_AGC_CONFIG__A, data); | |
| if (status < 0) | |
| goto error; | |
| break; | |
| } /* switch (agcSettingsIf->ctrl_mode) */ | |
| /* always set the top to support | |
| configurations without if-loop */ | |
| status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, p_agc_cfg->top); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int get_qam_signal_to_noise(struct drxk_state *state, | |
| s32 *p_signal_to_noise) | |
| { | |
| int status = 0; | |
| u16 qam_sl_err_power = 0; /* accum. error between | |
| raw and sliced symbols */ | |
| u32 qam_sl_sig_power = 0; /* used for MER, depends of | |
| QAM modulation */ | |
| u32 qam_sl_mer = 0; /* QAM MER */ | |
| dprintk(1, "\n"); | |
| /* MER calculation */ | |
| /* get the register value needed for MER */ | |
| status = read16(state, QAM_SL_ERR_POWER__A, &qam_sl_err_power); | |
| if (status < 0) { | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return -EINVAL; | |
| } | |
| switch (state->props.modulation) { | |
| case QAM_16: | |
| qam_sl_sig_power = DRXK_QAM_SL_SIG_POWER_QAM16 << 2; | |
| break; | |
| case QAM_32: | |
| qam_sl_sig_power = DRXK_QAM_SL_SIG_POWER_QAM32 << 2; | |
| break; | |
| case QAM_64: | |
| qam_sl_sig_power = DRXK_QAM_SL_SIG_POWER_QAM64 << 2; | |
| break; | |
| case QAM_128: | |
| qam_sl_sig_power = DRXK_QAM_SL_SIG_POWER_QAM128 << 2; | |
| break; | |
| default: | |
| case QAM_256: | |
| qam_sl_sig_power = DRXK_QAM_SL_SIG_POWER_QAM256 << 2; | |
| break; | |
| } | |
| if (qam_sl_err_power > 0) { | |
| qam_sl_mer = log10times100(qam_sl_sig_power) - | |
| log10times100((u32) qam_sl_err_power); | |
| } | |
| *p_signal_to_noise = qam_sl_mer; | |
| return status; | |
| } | |
| static int get_dvbt_signal_to_noise(struct drxk_state *state, | |
| s32 *p_signal_to_noise) | |
| { | |
| int status; | |
| u16 reg_data = 0; | |
| u32 eq_reg_td_sqr_err_i = 0; | |
| u32 eq_reg_td_sqr_err_q = 0; | |
| u16 eq_reg_td_sqr_err_exp = 0; | |
| u16 eq_reg_td_tps_pwr_ofs = 0; | |
| u16 eq_reg_td_req_smb_cnt = 0; | |
| u32 tps_cnt = 0; | |
| u32 sqr_err_iq = 0; | |
| u32 a = 0; | |
| u32 b = 0; | |
| u32 c = 0; | |
| u32 i_mer = 0; | |
| u16 transmission_params = 0; | |
| dprintk(1, "\n"); | |
| status = read16(state, OFDM_EQ_TOP_TD_TPS_PWR_OFS__A, | |
| &eq_reg_td_tps_pwr_ofs); | |
| if (status < 0) | |
| goto error; | |
| status = read16(state, OFDM_EQ_TOP_TD_REQ_SMB_CNT__A, | |
| &eq_reg_td_req_smb_cnt); | |
| if (status < 0) | |
| goto error; | |
| status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_EXP__A, | |
| &eq_reg_td_sqr_err_exp); | |
| if (status < 0) | |
| goto error; | |
| status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_I__A, | |
| ®_data); | |
| if (status < 0) | |
| goto error; | |
| /* Extend SQR_ERR_I operational range */ | |
| eq_reg_td_sqr_err_i = (u32) reg_data; | |
| if ((eq_reg_td_sqr_err_exp > 11) && | |
| (eq_reg_td_sqr_err_i < 0x00000FFFUL)) { | |
| eq_reg_td_sqr_err_i += 0x00010000UL; | |
| } | |
| status = read16(state, OFDM_EQ_TOP_TD_SQR_ERR_Q__A, ®_data); | |
| if (status < 0) | |
| goto error; | |
| /* Extend SQR_ERR_Q operational range */ | |
| eq_reg_td_sqr_err_q = (u32) reg_data; | |
| if ((eq_reg_td_sqr_err_exp > 11) && | |
| (eq_reg_td_sqr_err_q < 0x00000FFFUL)) | |
| eq_reg_td_sqr_err_q += 0x00010000UL; | |
| status = read16(state, OFDM_SC_RA_RAM_OP_PARAM__A, | |
| &transmission_params); | |
| if (status < 0) | |
| goto error; | |
| /* Check input data for MER */ | |
| /* MER calculation (in 0.1 dB) without math.h */ | |
| if ((eq_reg_td_tps_pwr_ofs == 0) || (eq_reg_td_req_smb_cnt == 0)) | |
| i_mer = 0; | |
| else if ((eq_reg_td_sqr_err_i + eq_reg_td_sqr_err_q) == 0) { | |
| /* No error at all, this must be the HW reset value | |
| * Apparently no first measurement yet | |
| * Set MER to 0.0 */ | |
| i_mer = 0; | |
| } else { | |
| sqr_err_iq = (eq_reg_td_sqr_err_i + eq_reg_td_sqr_err_q) << | |
| eq_reg_td_sqr_err_exp; | |
| if ((transmission_params & | |
| OFDM_SC_RA_RAM_OP_PARAM_MODE__M) | |
| == OFDM_SC_RA_RAM_OP_PARAM_MODE_2K) | |
| tps_cnt = 17; | |
| else | |
| tps_cnt = 68; | |
| /* IMER = 100 * log10 (x) | |
| where x = (eq_reg_td_tps_pwr_ofs^2 * | |
| eq_reg_td_req_smb_cnt * tps_cnt)/sqr_err_iq | |
| => IMER = a + b -c | |
| where a = 100 * log10 (eq_reg_td_tps_pwr_ofs^2) | |
| b = 100 * log10 (eq_reg_td_req_smb_cnt * tps_cnt) | |
| c = 100 * log10 (sqr_err_iq) | |
| */ | |
| /* log(x) x = 9bits * 9bits->18 bits */ | |
| a = log10times100(eq_reg_td_tps_pwr_ofs * | |
| eq_reg_td_tps_pwr_ofs); | |
| /* log(x) x = 16bits * 7bits->23 bits */ | |
| b = log10times100(eq_reg_td_req_smb_cnt * tps_cnt); | |
| /* log(x) x = (16bits + 16bits) << 15 ->32 bits */ | |
| c = log10times100(sqr_err_iq); | |
| i_mer = a + b - c; | |
| } | |
| *p_signal_to_noise = i_mer; | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int get_signal_to_noise(struct drxk_state *state, s32 *p_signal_to_noise) | |
| { | |
| dprintk(1, "\n"); | |
| *p_signal_to_noise = 0; | |
| switch (state->m_operation_mode) { | |
| case OM_DVBT: | |
| return get_dvbt_signal_to_noise(state, p_signal_to_noise); | |
| case OM_QAM_ITU_A: | |
| case OM_QAM_ITU_C: | |
| return get_qam_signal_to_noise(state, p_signal_to_noise); | |
| default: | |
| break; | |
| } | |
| return 0; | |
| } | |
| #if 0 | |
| static int get_dvbt_quality(struct drxk_state *state, s32 *p_quality) | |
| { | |
| /* SNR Values for quasi errorfree reception rom Nordig 2.2 */ | |
| int status = 0; | |
| dprintk(1, "\n"); | |
| static s32 QE_SN[] = { | |
| 51, /* QPSK 1/2 */ | |
| 69, /* QPSK 2/3 */ | |
| 79, /* QPSK 3/4 */ | |
| 89, /* QPSK 5/6 */ | |
| 97, /* QPSK 7/8 */ | |
| 108, /* 16-QAM 1/2 */ | |
| 131, /* 16-QAM 2/3 */ | |
| 146, /* 16-QAM 3/4 */ | |
| 156, /* 16-QAM 5/6 */ | |
| 160, /* 16-QAM 7/8 */ | |
| 165, /* 64-QAM 1/2 */ | |
| 187, /* 64-QAM 2/3 */ | |
| 202, /* 64-QAM 3/4 */ | |
| 216, /* 64-QAM 5/6 */ | |
| 225, /* 64-QAM 7/8 */ | |
| }; | |
| *p_quality = 0; | |
| do { | |
| s32 signal_to_noise = 0; | |
| u16 constellation = 0; | |
| u16 code_rate = 0; | |
| u32 signal_to_noise_rel; | |
| u32 ber_quality; | |
| status = get_dvbt_signal_to_noise(state, &signal_to_noise); | |
| if (status < 0) | |
| break; | |
| status = read16(state, OFDM_EQ_TOP_TD_TPS_CONST__A, | |
| &constellation); | |
| if (status < 0) | |
| break; | |
| constellation &= OFDM_EQ_TOP_TD_TPS_CONST__M; | |
| status = read16(state, OFDM_EQ_TOP_TD_TPS_CODE_HP__A, | |
| &code_rate); | |
| if (status < 0) | |
| break; | |
| code_rate &= OFDM_EQ_TOP_TD_TPS_CODE_HP__M; | |
| if (constellation > OFDM_EQ_TOP_TD_TPS_CONST_64QAM || | |
| code_rate > OFDM_EQ_TOP_TD_TPS_CODE_LP_7_8) | |
| break; | |
| signal_to_noise_rel = signal_to_noise - | |
| QE_SN[constellation * 5 + code_rate]; | |
| ber_quality = 100; | |
| if (signal_to_noise_rel < -70) | |
| *p_quality = 0; | |
| else if (signal_to_noise_rel < 30) | |
| *p_quality = ((signal_to_noise_rel + 70) * | |
| ber_quality) / 100; | |
| else | |
| *p_quality = ber_quality; | |
| } while (0); | |
| return 0; | |
| }; | |
| static int get_dvbc_quality(struct drxk_state *state, s32 *p_quality) | |
| { | |
| int status = 0; | |
| *p_quality = 0; | |
| dprintk(1, "\n"); | |
| do { | |
| u32 signal_to_noise = 0; | |
| u32 ber_quality = 100; | |
| u32 signal_to_noise_rel = 0; | |
| status = get_qam_signal_to_noise(state, &signal_to_noise); | |
| if (status < 0) | |
| break; | |
| switch (state->props.modulation) { | |
| case QAM_16: | |
| signal_to_noise_rel = signal_to_noise - 200; | |
| break; | |
| case QAM_32: | |
| signal_to_noise_rel = signal_to_noise - 230; | |
| break; /* Not in NorDig */ | |
| case QAM_64: | |
| signal_to_noise_rel = signal_to_noise - 260; | |
| break; | |
| case QAM_128: | |
| signal_to_noise_rel = signal_to_noise - 290; | |
| break; | |
| default: | |
| case QAM_256: | |
| signal_to_noise_rel = signal_to_noise - 320; | |
| break; | |
| } | |
| if (signal_to_noise_rel < -70) | |
| *p_quality = 0; | |
| else if (signal_to_noise_rel < 30) | |
| *p_quality = ((signal_to_noise_rel + 70) * | |
| ber_quality) / 100; | |
| else | |
| *p_quality = ber_quality; | |
| } while (0); | |
| return status; | |
| } | |
| static int get_quality(struct drxk_state *state, s32 *p_quality) | |
| { | |
| dprintk(1, "\n"); | |
| switch (state->m_operation_mode) { | |
| case OM_DVBT: | |
| return get_dvbt_quality(state, p_quality); | |
| case OM_QAM_ITU_A: | |
| return get_dvbc_quality(state, p_quality); | |
| default: | |
| break; | |
| } | |
| return 0; | |
| } | |
| #endif | |
| /* Free data ram in SIO HI */ | |
| #define SIO_HI_RA_RAM_USR_BEGIN__A 0x420040 | |
| #define SIO_HI_RA_RAM_USR_END__A 0x420060 | |
| #define DRXK_HI_ATOMIC_BUF_START (SIO_HI_RA_RAM_USR_BEGIN__A) | |
| #define DRXK_HI_ATOMIC_BUF_END (SIO_HI_RA_RAM_USR_BEGIN__A + 7) | |
| #define DRXK_HI_ATOMIC_READ SIO_HI_RA_RAM_PAR_3_ACP_RW_READ | |
| #define DRXK_HI_ATOMIC_WRITE SIO_HI_RA_RAM_PAR_3_ACP_RW_WRITE | |
| #define DRXDAP_FASI_ADDR2BLOCK(addr) (((addr) >> 22) & 0x3F) | |
| #define DRXDAP_FASI_ADDR2BANK(addr) (((addr) >> 16) & 0x3F) | |
| #define DRXDAP_FASI_ADDR2OFFSET(addr) ((addr) & 0x7FFF) | |
| static int ConfigureI2CBridge(struct drxk_state *state, bool b_enable_bridge) | |
| { | |
| int status = -EINVAL; | |
| dprintk(1, "\n"); | |
| if (state->m_drxk_state == DRXK_UNINITIALIZED) | |
| return 0; | |
| if (state->m_drxk_state == DRXK_POWERED_DOWN) | |
| goto error; | |
| if (state->no_i2c_bridge) | |
| return 0; | |
| status = write16(state, SIO_HI_RA_RAM_PAR_1__A, | |
| SIO_HI_RA_RAM_PAR_1_PAR1_SEC_KEY); | |
| if (status < 0) | |
| goto error; | |
| if (b_enable_bridge) { | |
| status = write16(state, SIO_HI_RA_RAM_PAR_2__A, | |
| SIO_HI_RA_RAM_PAR_2_BRD_CFG_CLOSED); | |
| if (status < 0) | |
| goto error; | |
| } else { | |
| status = write16(state, SIO_HI_RA_RAM_PAR_2__A, | |
| SIO_HI_RA_RAM_PAR_2_BRD_CFG_OPEN); | |
| if (status < 0) | |
| goto error; | |
| } | |
| status = hi_command(state, SIO_HI_RA_RAM_CMD_BRDCTRL, NULL); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int set_pre_saw(struct drxk_state *state, | |
| struct s_cfg_pre_saw *p_pre_saw_cfg) | |
| { | |
| int status = -EINVAL; | |
| dprintk(1, "\n"); | |
| if ((p_pre_saw_cfg == NULL) | |
| || (p_pre_saw_cfg->reference > IQM_AF_PDREF__M)) | |
| goto error; | |
| status = write16(state, IQM_AF_PDREF__A, p_pre_saw_cfg->reference); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int bl_direct_cmd(struct drxk_state *state, u32 target_addr, | |
| u16 rom_offset, u16 nr_of_elements, u32 time_out) | |
| { | |
| u16 bl_status = 0; | |
| u16 offset = (u16) ((target_addr >> 0) & 0x00FFFF); | |
| u16 blockbank = (u16) ((target_addr >> 16) & 0x000FFF); | |
| int status; | |
| unsigned long end; | |
| dprintk(1, "\n"); | |
| mutex_lock(&state->mutex); | |
| status = write16(state, SIO_BL_MODE__A, SIO_BL_MODE_DIRECT); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_BL_TGT_HDR__A, blockbank); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_BL_TGT_ADDR__A, offset); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_BL_SRC_ADDR__A, rom_offset); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_BL_SRC_LEN__A, nr_of_elements); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_BL_ENABLE__A, SIO_BL_ENABLE_ON); | |
| if (status < 0) | |
| goto error; | |
| end = jiffies + msecs_to_jiffies(time_out); | |
| do { | |
| status = read16(state, SIO_BL_STATUS__A, &bl_status); | |
| if (status < 0) | |
| goto error; | |
| } while ((bl_status == 0x1) && time_is_after_jiffies(end)); | |
| if (bl_status == 0x1) { | |
| pr_err("SIO not ready\n"); | |
| status = -EINVAL; | |
| goto error2; | |
| } | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| error2: | |
| mutex_unlock(&state->mutex); | |
| return status; | |
| } | |
| static int adc_sync_measurement(struct drxk_state *state, u16 *count) | |
| { | |
| u16 data = 0; | |
| int status; | |
| dprintk(1, "\n"); | |
| /* start measurement */ | |
| status = write16(state, IQM_AF_COMM_EXEC__A, IQM_AF_COMM_EXEC_ACTIVE); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_AF_START_LOCK__A, 1); | |
| if (status < 0) | |
| goto error; | |
| *count = 0; | |
| status = read16(state, IQM_AF_PHASE0__A, &data); | |
| if (status < 0) | |
| goto error; | |
| if (data == 127) | |
| *count = *count + 1; | |
| status = read16(state, IQM_AF_PHASE1__A, &data); | |
| if (status < 0) | |
| goto error; | |
| if (data == 127) | |
| *count = *count + 1; | |
| status = read16(state, IQM_AF_PHASE2__A, &data); | |
| if (status < 0) | |
| goto error; | |
| if (data == 127) | |
| *count = *count + 1; | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int adc_synchronization(struct drxk_state *state) | |
| { | |
| u16 count = 0; | |
| int status; | |
| dprintk(1, "\n"); | |
| status = adc_sync_measurement(state, &count); | |
| if (status < 0) | |
| goto error; | |
| if (count == 1) { | |
| /* Try sampling on a different edge */ | |
| u16 clk_neg = 0; | |
| status = read16(state, IQM_AF_CLKNEG__A, &clk_neg); | |
| if (status < 0) | |
| goto error; | |
| if ((clk_neg & IQM_AF_CLKNEG_CLKNEGDATA__M) == | |
| IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS) { | |
| clk_neg &= (~(IQM_AF_CLKNEG_CLKNEGDATA__M)); | |
| clk_neg |= | |
| IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_NEG; | |
| } else { | |
| clk_neg &= (~(IQM_AF_CLKNEG_CLKNEGDATA__M)); | |
| clk_neg |= | |
| IQM_AF_CLKNEG_CLKNEGDATA_CLK_ADC_DATA_POS; | |
| } | |
| status = write16(state, IQM_AF_CLKNEG__A, clk_neg); | |
| if (status < 0) | |
| goto error; | |
| status = adc_sync_measurement(state, &count); | |
| if (status < 0) | |
| goto error; | |
| } | |
| if (count < 2) | |
| status = -EINVAL; | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int set_frequency_shifter(struct drxk_state *state, | |
| u16 intermediate_freqk_hz, | |
| s32 tuner_freq_offset, bool is_dtv) | |
| { | |
| bool select_pos_image = false; | |
| u32 rf_freq_residual = tuner_freq_offset; | |
| u32 fm_frequency_shift = 0; | |
| bool tuner_mirror = !state->m_b_mirror_freq_spect; | |
| u32 adc_freq; | |
| bool adc_flip; | |
| int status; | |
| u32 if_freq_actual; | |
| u32 sampling_frequency = (u32) (state->m_sys_clock_freq / 3); | |
| u32 frequency_shift; | |
| bool image_to_select; | |
| dprintk(1, "\n"); | |
| /* | |
| Program frequency shifter | |
| No need to account for mirroring on RF | |
| */ | |
| if (is_dtv) { | |
| if ((state->m_operation_mode == OM_QAM_ITU_A) || | |
| (state->m_operation_mode == OM_QAM_ITU_C) || | |
| (state->m_operation_mode == OM_DVBT)) | |
| select_pos_image = true; | |
| else | |
| select_pos_image = false; | |
| } | |
| if (tuner_mirror) | |
| /* tuner doesn't mirror */ | |
| if_freq_actual = intermediate_freqk_hz + | |
| rf_freq_residual + fm_frequency_shift; | |
| else | |
| /* tuner mirrors */ | |
| if_freq_actual = intermediate_freqk_hz - | |
| rf_freq_residual - fm_frequency_shift; | |
| if (if_freq_actual > sampling_frequency / 2) { | |
| /* adc mirrors */ | |
| adc_freq = sampling_frequency - if_freq_actual; | |
| adc_flip = true; | |
| } else { | |
| /* adc doesn't mirror */ | |
| adc_freq = if_freq_actual; | |
| adc_flip = false; | |
| } | |
| frequency_shift = adc_freq; | |
| image_to_select = state->m_rfmirror ^ tuner_mirror ^ | |
| adc_flip ^ select_pos_image; | |
| state->m_iqm_fs_rate_ofs = | |
| Frac28a((frequency_shift), sampling_frequency); | |
| if (image_to_select) | |
| state->m_iqm_fs_rate_ofs = ~state->m_iqm_fs_rate_ofs + 1; | |
| /* Program frequency shifter with tuner offset compensation */ | |
| /* frequency_shift += tuner_freq_offset; TODO */ | |
| status = write32(state, IQM_FS_RATE_OFS_LO__A, | |
| state->m_iqm_fs_rate_ofs); | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int init_agc(struct drxk_state *state, bool is_dtv) | |
| { | |
| u16 ingain_tgt = 0; | |
| u16 ingain_tgt_min = 0; | |
| u16 ingain_tgt_max = 0; | |
| u16 clp_cyclen = 0; | |
| u16 clp_sum_min = 0; | |
| u16 clp_dir_to = 0; | |
| u16 sns_sum_min = 0; | |
| u16 sns_sum_max = 0; | |
| u16 clp_sum_max = 0; | |
| u16 sns_dir_to = 0; | |
| u16 ki_innergain_min = 0; | |
| u16 if_iaccu_hi_tgt = 0; | |
| u16 if_iaccu_hi_tgt_min = 0; | |
| u16 if_iaccu_hi_tgt_max = 0; | |
| u16 data = 0; | |
| u16 fast_clp_ctrl_delay = 0; | |
| u16 clp_ctrl_mode = 0; | |
| int status = 0; | |
| dprintk(1, "\n"); | |
| /* Common settings */ | |
| sns_sum_max = 1023; | |
| if_iaccu_hi_tgt_min = 2047; | |
| clp_cyclen = 500; | |
| clp_sum_max = 1023; | |
| /* AGCInit() not available for DVBT; init done in microcode */ | |
| if (!is_qam(state)) { | |
| pr_err("%s: mode %d is not DVB-C\n", | |
| __func__, state->m_operation_mode); | |
| return -EINVAL; | |
| } | |
| /* FIXME: Analog TV AGC require different settings */ | |
| /* Standard specific settings */ | |
| clp_sum_min = 8; | |
| clp_dir_to = (u16) -9; | |
| clp_ctrl_mode = 0; | |
| sns_sum_min = 8; | |
| sns_dir_to = (u16) -9; | |
| ki_innergain_min = (u16) -1030; | |
| if_iaccu_hi_tgt_max = 0x2380; | |
| if_iaccu_hi_tgt = 0x2380; | |
| ingain_tgt_min = 0x0511; | |
| ingain_tgt = 0x0511; | |
| ingain_tgt_max = 5119; | |
| fast_clp_ctrl_delay = state->m_qam_if_agc_cfg.fast_clip_ctrl_delay; | |
| status = write16(state, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A, | |
| fast_clp_ctrl_delay); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_CLP_CTRL_MODE__A, clp_ctrl_mode); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_INGAIN_TGT__A, ingain_tgt); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, ingain_tgt_min); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MAX__A, ingain_tgt_max); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MIN__A, | |
| if_iaccu_hi_tgt_min); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT_MAX__A, | |
| if_iaccu_hi_tgt_max); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_IF_IACCU_HI__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_IF_IACCU_LO__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_RF_IACCU_HI__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_RF_IACCU_LO__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_CLP_SUM_MAX__A, clp_sum_max); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_SNS_SUM_MAX__A, sns_sum_max); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_KI_INNERGAIN_MIN__A, | |
| ki_innergain_min); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_IF_IACCU_HI_TGT__A, | |
| if_iaccu_hi_tgt); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_CLP_CYCLEN__A, clp_cyclen); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_RF_SNS_DEV_MAX__A, 1023); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_RF_SNS_DEV_MIN__A, (u16) -1023); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_FAST_SNS_CTRL_DELAY__A, 50); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_KI_MAXMINGAIN_TH__A, 20); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_CLP_SUM_MIN__A, clp_sum_min); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_SNS_SUM_MIN__A, sns_sum_min); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_CLP_DIR_TO__A, clp_dir_to); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_SNS_DIR_TO__A, sns_dir_to); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_KI_MINGAIN__A, 0x7fff); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_KI_MAXGAIN__A, 0x0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_KI_MIN__A, 0x0117); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_KI_MAX__A, 0x0657); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_CLP_SUM__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_CLP_CYCCNT__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_CLP_DIR_WD__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_CLP_DIR_STP__A, 1); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_SNS_SUM__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_SNS_CYCCNT__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_SNS_DIR_WD__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_SNS_DIR_STP__A, 1); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_SNS_CYCLEN__A, 500); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_KI_CYCLEN__A, 500); | |
| if (status < 0) | |
| goto error; | |
| /* Initialize inner-loop KI gain factors */ | |
| status = read16(state, SCU_RAM_AGC_KI__A, &data); | |
| if (status < 0) | |
| goto error; | |
| data = 0x0657; | |
| data &= ~SCU_RAM_AGC_KI_RF__M; | |
| data |= (DRXK_KI_RAGC_QAM << SCU_RAM_AGC_KI_RF__B); | |
| data &= ~SCU_RAM_AGC_KI_IF__M; | |
| data |= (DRXK_KI_IAGC_QAM << SCU_RAM_AGC_KI_IF__B); | |
| status = write16(state, SCU_RAM_AGC_KI__A, data); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int dvbtqam_get_acc_pkt_err(struct drxk_state *state, u16 *packet_err) | |
| { | |
| int status; | |
| dprintk(1, "\n"); | |
| if (packet_err == NULL) | |
| status = write16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, 0); | |
| else | |
| status = read16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, | |
| packet_err); | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int dvbt_sc_command(struct drxk_state *state, | |
| u16 cmd, u16 subcmd, | |
| u16 param0, u16 param1, u16 param2, | |
| u16 param3, u16 param4) | |
| { | |
| u16 cur_cmd = 0; | |
| u16 err_code = 0; | |
| u16 retry_cnt = 0; | |
| u16 sc_exec = 0; | |
| int status; | |
| dprintk(1, "\n"); | |
| status = read16(state, OFDM_SC_COMM_EXEC__A, &sc_exec); | |
| if (sc_exec != 1) { | |
| /* SC is not running */ | |
| status = -EINVAL; | |
| } | |
| if (status < 0) | |
| goto error; | |
| /* Wait until sc is ready to receive command */ | |
| retry_cnt = 0; | |
| do { | |
| usleep_range(1000, 2000); | |
| status = read16(state, OFDM_SC_RA_RAM_CMD__A, &cur_cmd); | |
| retry_cnt++; | |
| } while ((cur_cmd != 0) && (retry_cnt < DRXK_MAX_RETRIES)); | |
| if (retry_cnt >= DRXK_MAX_RETRIES && (status < 0)) | |
| goto error; | |
| /* Write sub-command */ | |
| switch (cmd) { | |
| /* All commands using sub-cmd */ | |
| case OFDM_SC_RA_RAM_CMD_PROC_START: | |
| case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM: | |
| case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM: | |
| status = write16(state, OFDM_SC_RA_RAM_CMD_ADDR__A, subcmd); | |
| if (status < 0) | |
| goto error; | |
| break; | |
| default: | |
| /* Do nothing */ | |
| break; | |
| } | |
| /* Write needed parameters and the command */ | |
| status = 0; | |
| switch (cmd) { | |
| /* All commands using 5 parameters */ | |
| /* All commands using 4 parameters */ | |
| /* All commands using 3 parameters */ | |
| /* All commands using 2 parameters */ | |
| case OFDM_SC_RA_RAM_CMD_PROC_START: | |
| case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM: | |
| case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM: | |
| status |= write16(state, OFDM_SC_RA_RAM_PARAM1__A, param1); | |
| /* All commands using 1 parameters */ | |
| /* fall through */ | |
| case OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING: | |
| case OFDM_SC_RA_RAM_CMD_USER_IO: | |
| status |= write16(state, OFDM_SC_RA_RAM_PARAM0__A, param0); | |
| /* All commands using 0 parameters */ | |
| /* fall through */ | |
| case OFDM_SC_RA_RAM_CMD_GET_OP_PARAM: | |
| case OFDM_SC_RA_RAM_CMD_NULL: | |
| /* Write command */ | |
| status |= write16(state, OFDM_SC_RA_RAM_CMD__A, cmd); | |
| break; | |
| default: | |
| /* Unknown command */ | |
| status = -EINVAL; | |
| } | |
| if (status < 0) | |
| goto error; | |
| /* Wait until sc is ready processing command */ | |
| retry_cnt = 0; | |
| do { | |
| usleep_range(1000, 2000); | |
| status = read16(state, OFDM_SC_RA_RAM_CMD__A, &cur_cmd); | |
| retry_cnt++; | |
| } while ((cur_cmd != 0) && (retry_cnt < DRXK_MAX_RETRIES)); | |
| if (retry_cnt >= DRXK_MAX_RETRIES && (status < 0)) | |
| goto error; | |
| /* Check for illegal cmd */ | |
| status = read16(state, OFDM_SC_RA_RAM_CMD_ADDR__A, &err_code); | |
| if (err_code == 0xFFFF) { | |
| /* illegal command */ | |
| status = -EINVAL; | |
| } | |
| if (status < 0) | |
| goto error; | |
| /* Retrieve results parameters from SC */ | |
| switch (cmd) { | |
| /* All commands yielding 5 results */ | |
| /* All commands yielding 4 results */ | |
| /* All commands yielding 3 results */ | |
| /* All commands yielding 2 results */ | |
| /* All commands yielding 1 result */ | |
| case OFDM_SC_RA_RAM_CMD_USER_IO: | |
| case OFDM_SC_RA_RAM_CMD_GET_OP_PARAM: | |
| status = read16(state, OFDM_SC_RA_RAM_PARAM0__A, &(param0)); | |
| /* All commands yielding 0 results */ | |
| case OFDM_SC_RA_RAM_CMD_SET_ECHO_TIMING: | |
| case OFDM_SC_RA_RAM_CMD_SET_TIMER: | |
| case OFDM_SC_RA_RAM_CMD_PROC_START: | |
| case OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM: | |
| case OFDM_SC_RA_RAM_CMD_PROGRAM_PARAM: | |
| case OFDM_SC_RA_RAM_CMD_NULL: | |
| break; | |
| default: | |
| /* Unknown command */ | |
| status = -EINVAL; | |
| break; | |
| } /* switch (cmd->cmd) */ | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int power_up_dvbt(struct drxk_state *state) | |
| { | |
| enum drx_power_mode power_mode = DRX_POWER_UP; | |
| int status; | |
| dprintk(1, "\n"); | |
| status = ctrl_power_mode(state, &power_mode); | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int dvbt_ctrl_set_inc_enable(struct drxk_state *state, bool *enabled) | |
| { | |
| int status; | |
| dprintk(1, "\n"); | |
| if (*enabled) | |
| status = write16(state, IQM_CF_BYPASSDET__A, 0); | |
| else | |
| status = write16(state, IQM_CF_BYPASSDET__A, 1); | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| #define DEFAULT_FR_THRES_8K 4000 | |
| static int dvbt_ctrl_set_fr_enable(struct drxk_state *state, bool *enabled) | |
| { | |
| int status; | |
| dprintk(1, "\n"); | |
| if (*enabled) { | |
| /* write mask to 1 */ | |
| status = write16(state, OFDM_SC_RA_RAM_FR_THRES_8K__A, | |
| DEFAULT_FR_THRES_8K); | |
| } else { | |
| /* write mask to 0 */ | |
| status = write16(state, OFDM_SC_RA_RAM_FR_THRES_8K__A, 0); | |
| } | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int dvbt_ctrl_set_echo_threshold(struct drxk_state *state, | |
| struct drxk_cfg_dvbt_echo_thres_t *echo_thres) | |
| { | |
| u16 data = 0; | |
| int status; | |
| dprintk(1, "\n"); | |
| status = read16(state, OFDM_SC_RA_RAM_ECHO_THRES__A, &data); | |
| if (status < 0) | |
| goto error; | |
| switch (echo_thres->fft_mode) { | |
| case DRX_FFTMODE_2K: | |
| data &= ~OFDM_SC_RA_RAM_ECHO_THRES_2K__M; | |
| data |= ((echo_thres->threshold << | |
| OFDM_SC_RA_RAM_ECHO_THRES_2K__B) | |
| & (OFDM_SC_RA_RAM_ECHO_THRES_2K__M)); | |
| break; | |
| case DRX_FFTMODE_8K: | |
| data &= ~OFDM_SC_RA_RAM_ECHO_THRES_8K__M; | |
| data |= ((echo_thres->threshold << | |
| OFDM_SC_RA_RAM_ECHO_THRES_8K__B) | |
| & (OFDM_SC_RA_RAM_ECHO_THRES_8K__M)); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| status = write16(state, OFDM_SC_RA_RAM_ECHO_THRES__A, data); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int dvbt_ctrl_set_sqi_speed(struct drxk_state *state, | |
| enum drxk_cfg_dvbt_sqi_speed *speed) | |
| { | |
| int status = -EINVAL; | |
| dprintk(1, "\n"); | |
| switch (*speed) { | |
| case DRXK_DVBT_SQI_SPEED_FAST: | |
| case DRXK_DVBT_SQI_SPEED_MEDIUM: | |
| case DRXK_DVBT_SQI_SPEED_SLOW: | |
| break; | |
| default: | |
| goto error; | |
| } | |
| status = write16(state, SCU_RAM_FEC_PRE_RS_BER_FILTER_SH__A, | |
| (u16) *speed); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| /*============================================================================*/ | |
| /* | |
| * \brief Activate DVBT specific presets | |
| * \param demod instance of demodulator. | |
| * \return DRXStatus_t. | |
| * | |
| * Called in DVBTSetStandard | |
| * | |
| */ | |
| static int dvbt_activate_presets(struct drxk_state *state) | |
| { | |
| int status; | |
| bool setincenable = false; | |
| bool setfrenable = true; | |
| struct drxk_cfg_dvbt_echo_thres_t echo_thres2k = { 0, DRX_FFTMODE_2K }; | |
| struct drxk_cfg_dvbt_echo_thres_t echo_thres8k = { 0, DRX_FFTMODE_8K }; | |
| dprintk(1, "\n"); | |
| status = dvbt_ctrl_set_inc_enable(state, &setincenable); | |
| if (status < 0) | |
| goto error; | |
| status = dvbt_ctrl_set_fr_enable(state, &setfrenable); | |
| if (status < 0) | |
| goto error; | |
| status = dvbt_ctrl_set_echo_threshold(state, &echo_thres2k); | |
| if (status < 0) | |
| goto error; | |
| status = dvbt_ctrl_set_echo_threshold(state, &echo_thres8k); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_AGC_INGAIN_TGT_MAX__A, | |
| state->m_dvbt_if_agc_cfg.ingain_tgt_max); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| /*============================================================================*/ | |
| /* | |
| * \brief Initialize channelswitch-independent settings for DVBT. | |
| * \param demod instance of demodulator. | |
| * \return DRXStatus_t. | |
| * | |
| * For ROM code channel filter taps are loaded from the bootloader. For microcode | |
| * the DVB-T taps from the drxk_filters.h are used. | |
| */ | |
| static int set_dvbt_standard(struct drxk_state *state, | |
| enum operation_mode o_mode) | |
| { | |
| u16 cmd_result = 0; | |
| u16 data = 0; | |
| int status; | |
| dprintk(1, "\n"); | |
| power_up_dvbt(state); | |
| /* added antenna switch */ | |
| switch_antenna_to_dvbt(state); | |
| /* send OFDM reset command */ | |
| status = scu_command(state, | |
| SCU_RAM_COMMAND_STANDARD_OFDM | |
| | SCU_RAM_COMMAND_CMD_DEMOD_RESET, | |
| 0, NULL, 1, &cmd_result); | |
| if (status < 0) | |
| goto error; | |
| /* send OFDM setenv command */ | |
| status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | |
| | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV, | |
| 0, NULL, 1, &cmd_result); | |
| if (status < 0) | |
| goto error; | |
| /* reset datapath for OFDM, processors first */ | |
| status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP); | |
| if (status < 0) | |
| goto error; | |
| /* IQM setup */ | |
| /* synchronize on ofdstate->m_festart */ | |
| status = write16(state, IQM_AF_UPD_SEL__A, 1); | |
| if (status < 0) | |
| goto error; | |
| /* window size for clipping ADC detection */ | |
| status = write16(state, IQM_AF_CLP_LEN__A, 0); | |
| if (status < 0) | |
| goto error; | |
| /* window size for for sense pre-SAW detection */ | |
| status = write16(state, IQM_AF_SNS_LEN__A, 0); | |
| if (status < 0) | |
| goto error; | |
| /* sense threshold for sense pre-SAW detection */ | |
| status = write16(state, IQM_AF_AMUX__A, IQM_AF_AMUX_SIGNAL2ADC); | |
| if (status < 0) | |
| goto error; | |
| status = set_iqm_af(state, true); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_AF_AGC_RF__A, 0); | |
| if (status < 0) | |
| goto error; | |
| /* Impulse noise cruncher setup */ | |
| status = write16(state, IQM_AF_INC_LCT__A, 0); /* crunch in IQM_CF */ | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_CF_DET_LCT__A, 0); /* detect in IQM_CF */ | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_CF_WND_LEN__A, 3); /* peak detector window length */ | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_RC_STRETCH__A, 16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_CF_OUT_ENA__A, 0x4); /* enable output 2 */ | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_CF_DS_ENA__A, 0x4); /* decimate output 2 */ | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_CF_SCALE__A, 1600); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_CF_SCALE_SH__A, 0); | |
| if (status < 0) | |
| goto error; | |
| /* virtual clipping threshold for clipping ADC detection */ | |
| status = write16(state, IQM_AF_CLP_TH__A, 448); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_CF_DATATH__A, 495); /* crunching threshold */ | |
| if (status < 0) | |
| goto error; | |
| status = bl_chain_cmd(state, DRXK_BL_ROM_OFFSET_TAPS_DVBT, | |
| DRXK_BLCC_NR_ELEMENTS_TAPS, DRXK_BLC_TIMEOUT); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_CF_PKDTH__A, 2); /* peak detector threshold */ | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_CF_POW_MEAS_LEN__A, 2); | |
| if (status < 0) | |
| goto error; | |
| /* enable power measurement interrupt */ | |
| status = write16(state, IQM_CF_COMM_INT_MSK__A, 1); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_ACTIVE); | |
| if (status < 0) | |
| goto error; | |
| /* IQM will not be reset from here, sync ADC and update/init AGC */ | |
| status = adc_synchronization(state); | |
| if (status < 0) | |
| goto error; | |
| status = set_pre_saw(state, &state->m_dvbt_pre_saw_cfg); | |
| if (status < 0) | |
| goto error; | |
| /* Halt SCU to enable safe non-atomic accesses */ | |
| status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD); | |
| if (status < 0) | |
| goto error; | |
| status = set_agc_rf(state, &state->m_dvbt_rf_agc_cfg, true); | |
| if (status < 0) | |
| goto error; | |
| status = set_agc_if(state, &state->m_dvbt_if_agc_cfg, true); | |
| if (status < 0) | |
| goto error; | |
| /* Set Noise Estimation notch width and enable DC fix */ | |
| status = read16(state, OFDM_SC_RA_RAM_CONFIG__A, &data); | |
| if (status < 0) | |
| goto error; | |
| data |= OFDM_SC_RA_RAM_CONFIG_NE_FIX_ENABLE__M; | |
| status = write16(state, OFDM_SC_RA_RAM_CONFIG__A, data); | |
| if (status < 0) | |
| goto error; | |
| /* Activate SCU to enable SCU commands */ | |
| status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE); | |
| if (status < 0) | |
| goto error; | |
| if (!state->m_drxk_a3_rom_code) { | |
| /* AGCInit() is not done for DVBT, so set agcfast_clip_ctrl_delay */ | |
| status = write16(state, SCU_RAM_AGC_FAST_CLP_CTRL_DELAY__A, | |
| state->m_dvbt_if_agc_cfg.fast_clip_ctrl_delay); | |
| if (status < 0) | |
| goto error; | |
| } | |
| /* OFDM_SC setup */ | |
| #ifdef COMPILE_FOR_NONRT | |
| status = write16(state, OFDM_SC_RA_RAM_BE_OPT_DELAY__A, 1); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, OFDM_SC_RA_RAM_BE_OPT_INIT_DELAY__A, 2); | |
| if (status < 0) | |
| goto error; | |
| #endif | |
| /* FEC setup */ | |
| status = write16(state, FEC_DI_INPUT_CTL__A, 1); /* OFDM input */ | |
| if (status < 0) | |
| goto error; | |
| #ifdef COMPILE_FOR_NONRT | |
| status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, 0x400); | |
| if (status < 0) | |
| goto error; | |
| #else | |
| status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, 0x1000); | |
| if (status < 0) | |
| goto error; | |
| #endif | |
| status = write16(state, FEC_RS_MEASUREMENT_PRESCALE__A, 0x0001); | |
| if (status < 0) | |
| goto error; | |
| /* Setup MPEG bus */ | |
| status = mpegts_dto_setup(state, OM_DVBT); | |
| if (status < 0) | |
| goto error; | |
| /* Set DVBT Presets */ | |
| status = dvbt_activate_presets(state); | |
| if (status < 0) | |
| goto error; | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| /*============================================================================*/ | |
| /* | |
| * \brief start dvbt demodulating for channel. | |
| * \param demod instance of demodulator. | |
| * \return DRXStatus_t. | |
| */ | |
| static int dvbt_start(struct drxk_state *state) | |
| { | |
| u16 param1; | |
| int status; | |
| /* drxk_ofdm_sc_cmd_t scCmd; */ | |
| dprintk(1, "\n"); | |
| /* start correct processes to get in lock */ | |
| /* DRXK: OFDM_SC_RA_RAM_PROC_LOCKTRACK is no longer in mapfile! */ | |
| param1 = OFDM_SC_RA_RAM_LOCKTRACK_MIN; | |
| status = dvbt_sc_command(state, OFDM_SC_RA_RAM_CMD_PROC_START, 0, | |
| OFDM_SC_RA_RAM_SW_EVENT_RUN_NMASK__M, param1, | |
| 0, 0, 0); | |
| if (status < 0) | |
| goto error; | |
| /* start FEC OC */ | |
| status = mpegts_start(state); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE); | |
| if (status < 0) | |
| goto error; | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| /*============================================================================*/ | |
| /* | |
| * \brief Set up dvbt demodulator for channel. | |
| * \param demod instance of demodulator. | |
| * \return DRXStatus_t. | |
| * // original DVBTSetChannel() | |
| */ | |
| static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz, | |
| s32 tuner_freq_offset) | |
| { | |
| u16 cmd_result = 0; | |
| u16 transmission_params = 0; | |
| u16 operation_mode = 0; | |
| u32 iqm_rc_rate_ofs = 0; | |
| u32 bandwidth = 0; | |
| u16 param1; | |
| int status; | |
| dprintk(1, "IF =%d, TFO = %d\n", | |
| intermediate_freqk_hz, tuner_freq_offset); | |
| status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | |
| | SCU_RAM_COMMAND_CMD_DEMOD_STOP, | |
| 0, NULL, 1, &cmd_result); | |
| if (status < 0) | |
| goto error; | |
| /* Halt SCU to enable safe non-atomic accesses */ | |
| status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD); | |
| if (status < 0) | |
| goto error; | |
| /* Stop processors */ | |
| status = write16(state, OFDM_SC_COMM_EXEC__A, OFDM_SC_COMM_EXEC_STOP); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, OFDM_LC_COMM_EXEC__A, OFDM_LC_COMM_EXEC_STOP); | |
| if (status < 0) | |
| goto error; | |
| /* Mandatory fix, always stop CP, required to set spl offset back to | |
| hardware default (is set to 0 by ucode during pilot detection */ | |
| status = write16(state, OFDM_CP_COMM_EXEC__A, OFDM_CP_COMM_EXEC_STOP); | |
| if (status < 0) | |
| goto error; | |
| /*== Write channel settings to device ================================*/ | |
| /* mode */ | |
| switch (state->props.transmission_mode) { | |
| case TRANSMISSION_MODE_AUTO: | |
| default: | |
| operation_mode |= OFDM_SC_RA_RAM_OP_AUTO_MODE__M; | |
| /* try first guess DRX_FFTMODE_8K */ | |
| /* fall through */ | |
| case TRANSMISSION_MODE_8K: | |
| transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_MODE_8K; | |
| break; | |
| case TRANSMISSION_MODE_2K: | |
| transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_MODE_2K; | |
| break; | |
| } | |
| /* guard */ | |
| switch (state->props.guard_interval) { | |
| default: | |
| case GUARD_INTERVAL_AUTO: | |
| operation_mode |= OFDM_SC_RA_RAM_OP_AUTO_GUARD__M; | |
| /* try first guess DRX_GUARD_1DIV4 */ | |
| /* fall through */ | |
| case GUARD_INTERVAL_1_4: | |
| transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_4; | |
| break; | |
| case GUARD_INTERVAL_1_32: | |
| transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_32; | |
| break; | |
| case GUARD_INTERVAL_1_16: | |
| transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_16; | |
| break; | |
| case GUARD_INTERVAL_1_8: | |
| transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_GUARD_8; | |
| break; | |
| } | |
| /* hierarchy */ | |
| switch (state->props.hierarchy) { | |
| case HIERARCHY_AUTO: | |
| case HIERARCHY_NONE: | |
| default: | |
| operation_mode |= OFDM_SC_RA_RAM_OP_AUTO_HIER__M; | |
| /* try first guess SC_RA_RAM_OP_PARAM_HIER_NO */ | |
| /* transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_HIER_NO; */ | |
| /* fall through */ | |
| case HIERARCHY_1: | |
| transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A1; | |
| break; | |
| case HIERARCHY_2: | |
| transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A2; | |
| break; | |
| case HIERARCHY_4: | |
| transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_HIER_A4; | |
| break; | |
| } | |
| /* modulation */ | |
| switch (state->props.modulation) { | |
| case QAM_AUTO: | |
| default: | |
| operation_mode |= OFDM_SC_RA_RAM_OP_AUTO_CONST__M; | |
| /* try first guess DRX_CONSTELLATION_QAM64 */ | |
| /* fall through */ | |
| case QAM_64: | |
| transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM64; | |
| break; | |
| case QPSK: | |
| transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QPSK; | |
| break; | |
| case QAM_16: | |
| transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_CONST_QAM16; | |
| break; | |
| } | |
| #if 0 | |
| /* No hierarchical channels support in BDA */ | |
| /* Priority (only for hierarchical channels) */ | |
| switch (channel->priority) { | |
| case DRX_PRIORITY_LOW: | |
| transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_LO; | |
| WR16(dev_addr, OFDM_EC_SB_PRIOR__A, | |
| OFDM_EC_SB_PRIOR_LO); | |
| break; | |
| case DRX_PRIORITY_HIGH: | |
| transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI; | |
| WR16(dev_addr, OFDM_EC_SB_PRIOR__A, | |
| OFDM_EC_SB_PRIOR_HI)); | |
| break; | |
| case DRX_PRIORITY_UNKNOWN: /* fall through */ | |
| default: | |
| status = -EINVAL; | |
| goto error; | |
| } | |
| #else | |
| /* Set Priorty high */ | |
| transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_PRIO_HI; | |
| status = write16(state, OFDM_EC_SB_PRIOR__A, OFDM_EC_SB_PRIOR_HI); | |
| if (status < 0) | |
| goto error; | |
| #endif | |
| /* coderate */ | |
| switch (state->props.code_rate_HP) { | |
| case FEC_AUTO: | |
| default: | |
| operation_mode |= OFDM_SC_RA_RAM_OP_AUTO_RATE__M; | |
| /* try first guess DRX_CODERATE_2DIV3 */ | |
| /* fall through */ | |
| case FEC_2_3: | |
| transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_RATE_2_3; | |
| break; | |
| case FEC_1_2: | |
| transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_RATE_1_2; | |
| break; | |
| case FEC_3_4: | |
| transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_RATE_3_4; | |
| break; | |
| case FEC_5_6: | |
| transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_RATE_5_6; | |
| break; | |
| case FEC_7_8: | |
| transmission_params |= OFDM_SC_RA_RAM_OP_PARAM_RATE_7_8; | |
| break; | |
| } | |
| /* | |
| * SAW filter selection: normaly not necesarry, but if wanted | |
| * the application can select a SAW filter via the driver by | |
| * using UIOs | |
| */ | |
| /* First determine real bandwidth (Hz) */ | |
| /* Also set delay for impulse noise cruncher */ | |
| /* | |
| * Also set parameters for EC_OC fix, note EC_OC_REG_TMD_HIL_MAR is | |
| * changed by SC for fix for some 8K,1/8 guard but is restored by | |
| * InitEC and ResetEC functions | |
| */ | |
| switch (state->props.bandwidth_hz) { | |
| case 0: | |
| state->props.bandwidth_hz = 8000000; | |
| /* fall through */ | |
| case 8000000: | |
| bandwidth = DRXK_BANDWIDTH_8MHZ_IN_HZ; | |
| status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, | |
| 3052); | |
| if (status < 0) | |
| goto error; | |
| /* cochannel protection for PAL 8 MHz */ | |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, | |
| 7); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, | |
| 7); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, | |
| 7); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, | |
| 1); | |
| if (status < 0) | |
| goto error; | |
| break; | |
| case 7000000: | |
| bandwidth = DRXK_BANDWIDTH_7MHZ_IN_HZ; | |
| status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, | |
| 3491); | |
| if (status < 0) | |
| goto error; | |
| /* cochannel protection for PAL 7 MHz */ | |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, | |
| 8); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, | |
| 8); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, | |
| 4); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, | |
| 1); | |
| if (status < 0) | |
| goto error; | |
| break; | |
| case 6000000: | |
| bandwidth = DRXK_BANDWIDTH_6MHZ_IN_HZ; | |
| status = write16(state, OFDM_SC_RA_RAM_SRMM_FIX_FACT_8K__A, | |
| 4073); | |
| if (status < 0) | |
| goto error; | |
| /* cochannel protection for NTSC 6 MHz */ | |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_LEFT__A, | |
| 19); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_8K_PER_RIGHT__A, | |
| 19); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_LEFT__A, | |
| 14); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, OFDM_SC_RA_RAM_NI_INIT_2K_PER_RIGHT__A, | |
| 1); | |
| if (status < 0) | |
| goto error; | |
| break; | |
| default: | |
| status = -EINVAL; | |
| goto error; | |
| } | |
| if (iqm_rc_rate_ofs == 0) { | |
| /* Now compute IQM_RC_RATE_OFS | |
| (((SysFreq/BandWidth)/2)/2) -1) * 2^23) | |
| => | |
| ((SysFreq / BandWidth) * (2^21)) - (2^23) | |
| */ | |
| /* (SysFreq / BandWidth) * (2^28) */ | |
| /* | |
| * assert (MAX(sysClk)/MIN(bandwidth) < 16) | |
| * => assert(MAX(sysClk) < 16*MIN(bandwidth)) | |
| * => assert(109714272 > 48000000) = true | |
| * so Frac 28 can be used | |
| */ | |
| iqm_rc_rate_ofs = Frac28a((u32) | |
| ((state->m_sys_clock_freq * | |
| 1000) / 3), bandwidth); | |
| /* (SysFreq / BandWidth) * (2^21), rounding before truncating */ | |
| if ((iqm_rc_rate_ofs & 0x7fL) >= 0x40) | |
| iqm_rc_rate_ofs += 0x80L; | |
| iqm_rc_rate_ofs = iqm_rc_rate_ofs >> 7; | |
| /* ((SysFreq / BandWidth) * (2^21)) - (2^23) */ | |
| iqm_rc_rate_ofs = iqm_rc_rate_ofs - (1 << 23); | |
| } | |
| iqm_rc_rate_ofs &= | |
| ((((u32) IQM_RC_RATE_OFS_HI__M) << | |
| IQM_RC_RATE_OFS_LO__W) | IQM_RC_RATE_OFS_LO__M); | |
| status = write32(state, IQM_RC_RATE_OFS_LO__A, iqm_rc_rate_ofs); | |
| if (status < 0) | |
| goto error; | |
| /* Bandwidth setting done */ | |
| #if 0 | |
| status = dvbt_set_frequency_shift(demod, channel, tuner_offset); | |
| if (status < 0) | |
| goto error; | |
| #endif | |
| status = set_frequency_shifter(state, intermediate_freqk_hz, | |
| tuner_freq_offset, true); | |
| if (status < 0) | |
| goto error; | |
| /*== start SC, write channel settings to SC ==========================*/ | |
| /* Activate SCU to enable SCU commands */ | |
| status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE); | |
| if (status < 0) | |
| goto error; | |
| /* Enable SC after setting all other parameters */ | |
| status = write16(state, OFDM_SC_COMM_STATE__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, OFDM_SC_COMM_EXEC__A, 1); | |
| if (status < 0) | |
| goto error; | |
| status = scu_command(state, SCU_RAM_COMMAND_STANDARD_OFDM | |
| | SCU_RAM_COMMAND_CMD_DEMOD_START, | |
| 0, NULL, 1, &cmd_result); | |
| if (status < 0) | |
| goto error; | |
| /* Write SC parameter registers, set all AUTO flags in operation mode */ | |
| param1 = (OFDM_SC_RA_RAM_OP_AUTO_MODE__M | | |
| OFDM_SC_RA_RAM_OP_AUTO_GUARD__M | | |
| OFDM_SC_RA_RAM_OP_AUTO_CONST__M | | |
| OFDM_SC_RA_RAM_OP_AUTO_HIER__M | | |
| OFDM_SC_RA_RAM_OP_AUTO_RATE__M); | |
| status = dvbt_sc_command(state, OFDM_SC_RA_RAM_CMD_SET_PREF_PARAM, | |
| 0, transmission_params, param1, 0, 0, 0); | |
| if (status < 0) | |
| goto error; | |
| if (!state->m_drxk_a3_rom_code) | |
| status = dvbt_ctrl_set_sqi_speed(state, &state->m_sqi_speed); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| /*============================================================================*/ | |
| /* | |
| * \brief Retrieve lock status . | |
| * \param demod Pointer to demodulator instance. | |
| * \param lockStat Pointer to lock status structure. | |
| * \return DRXStatus_t. | |
| * | |
| */ | |
| static int get_dvbt_lock_status(struct drxk_state *state, u32 *p_lock_status) | |
| { | |
| int status; | |
| const u16 mpeg_lock_mask = (OFDM_SC_RA_RAM_LOCK_MPEG__M | | |
| OFDM_SC_RA_RAM_LOCK_FEC__M); | |
| const u16 fec_lock_mask = (OFDM_SC_RA_RAM_LOCK_FEC__M); | |
| const u16 demod_lock_mask = OFDM_SC_RA_RAM_LOCK_DEMOD__M; | |
| u16 sc_ra_ram_lock = 0; | |
| u16 sc_comm_exec = 0; | |
| dprintk(1, "\n"); | |
| *p_lock_status = NOT_LOCKED; | |
| /* driver 0.9.0 */ | |
| /* Check if SC is running */ | |
| status = read16(state, OFDM_SC_COMM_EXEC__A, &sc_comm_exec); | |
| if (status < 0) | |
| goto end; | |
| if (sc_comm_exec == OFDM_SC_COMM_EXEC_STOP) | |
| goto end; | |
| status = read16(state, OFDM_SC_RA_RAM_LOCK__A, &sc_ra_ram_lock); | |
| if (status < 0) | |
| goto end; | |
| if ((sc_ra_ram_lock & mpeg_lock_mask) == mpeg_lock_mask) | |
| *p_lock_status = MPEG_LOCK; | |
| else if ((sc_ra_ram_lock & fec_lock_mask) == fec_lock_mask) | |
| *p_lock_status = FEC_LOCK; | |
| else if ((sc_ra_ram_lock & demod_lock_mask) == demod_lock_mask) | |
| *p_lock_status = DEMOD_LOCK; | |
| else if (sc_ra_ram_lock & OFDM_SC_RA_RAM_LOCK_NODVBT__M) | |
| *p_lock_status = NEVER_LOCK; | |
| end: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int power_up_qam(struct drxk_state *state) | |
| { | |
| enum drx_power_mode power_mode = DRXK_POWER_DOWN_OFDM; | |
| int status; | |
| dprintk(1, "\n"); | |
| status = ctrl_power_mode(state, &power_mode); | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| /* Power Down QAM */ | |
| static int power_down_qam(struct drxk_state *state) | |
| { | |
| u16 data = 0; | |
| u16 cmd_result; | |
| int status = 0; | |
| dprintk(1, "\n"); | |
| status = read16(state, SCU_COMM_EXEC__A, &data); | |
| if (status < 0) | |
| goto error; | |
| if (data == SCU_COMM_EXEC_ACTIVE) { | |
| /* | |
| STOP demodulator | |
| QAM and HW blocks | |
| */ | |
| /* stop all comstate->m_exec */ | |
| status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP); | |
| if (status < 0) | |
| goto error; | |
| status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | |
| | SCU_RAM_COMMAND_CMD_DEMOD_STOP, | |
| 0, NULL, 1, &cmd_result); | |
| if (status < 0) | |
| goto error; | |
| } | |
| /* powerdown AFE */ | |
| status = set_iqm_af(state, false); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| /*============================================================================*/ | |
| /* | |
| * \brief Setup of the QAM Measurement intervals for signal quality | |
| * \param demod instance of demod. | |
| * \param modulation current modulation. | |
| * \return DRXStatus_t. | |
| * | |
| * NOTE: | |
| * Take into account that for certain settings the errorcounters can overflow. | |
| * The implementation does not check this. | |
| * | |
| */ | |
| static int set_qam_measurement(struct drxk_state *state, | |
| enum e_drxk_constellation modulation, | |
| u32 symbol_rate) | |
| { | |
| u32 fec_bits_desired = 0; /* BER accounting period */ | |
| u32 fec_rs_period_total = 0; /* Total period */ | |
| u16 fec_rs_prescale = 0; /* ReedSolomon Measurement Prescale */ | |
| u16 fec_rs_period = 0; /* Value for corresponding I2C register */ | |
| int status = 0; | |
| dprintk(1, "\n"); | |
| fec_rs_prescale = 1; | |
| /* fec_bits_desired = symbol_rate [kHz] * | |
| FrameLenght [ms] * | |
| (modulation + 1) * | |
| SyncLoss (== 1) * | |
| ViterbiLoss (==1) | |
| */ | |
| switch (modulation) { | |
| case DRX_CONSTELLATION_QAM16: | |
| fec_bits_desired = 4 * symbol_rate; | |
| break; | |
| case DRX_CONSTELLATION_QAM32: | |
| fec_bits_desired = 5 * symbol_rate; | |
| break; | |
| case DRX_CONSTELLATION_QAM64: | |
| fec_bits_desired = 6 * symbol_rate; | |
| break; | |
| case DRX_CONSTELLATION_QAM128: | |
| fec_bits_desired = 7 * symbol_rate; | |
| break; | |
| case DRX_CONSTELLATION_QAM256: | |
| fec_bits_desired = 8 * symbol_rate; | |
| break; | |
| default: | |
| status = -EINVAL; | |
| } | |
| if (status < 0) | |
| goto error; | |
| fec_bits_desired /= 1000; /* symbol_rate [Hz] -> symbol_rate [kHz] */ | |
| fec_bits_desired *= 500; /* meas. period [ms] */ | |
| /* Annex A/C: bits/RsPeriod = 204 * 8 = 1632 */ | |
| /* fec_rs_period_total = fec_bits_desired / 1632 */ | |
| fec_rs_period_total = (fec_bits_desired / 1632UL) + 1; /* roughly ceil */ | |
| /* fec_rs_period_total = fec_rs_prescale * fec_rs_period */ | |
| fec_rs_prescale = 1 + (u16) (fec_rs_period_total >> 16); | |
| if (fec_rs_prescale == 0) { | |
| /* Divide by zero (though impossible) */ | |
| status = -EINVAL; | |
| if (status < 0) | |
| goto error; | |
| } | |
| fec_rs_period = | |
| ((u16) fec_rs_period_total + | |
| (fec_rs_prescale >> 1)) / fec_rs_prescale; | |
| /* write corresponding registers */ | |
| status = write16(state, FEC_RS_MEASUREMENT_PERIOD__A, fec_rs_period); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_RS_MEASUREMENT_PRESCALE__A, | |
| fec_rs_prescale); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_OC_SNC_FAIL_PERIOD__A, fec_rs_period); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int set_qam16(struct drxk_state *state) | |
| { | |
| int status = 0; | |
| dprintk(1, "\n"); | |
| /* QAM Equalizer Setup */ | |
| /* Equalizer */ | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 13517); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 13517); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 13517); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 13517); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13517); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 13517); | |
| if (status < 0) | |
| goto error; | |
| /* Decision Feedback Equalizer */ | |
| status = write16(state, QAM_DQ_QUAL_FUN0__A, 2); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN1__A, 2); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN2__A, 2); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN3__A, 2); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN4__A, 2); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN5__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_SY_SYNC_HWM__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_SY_SYNC_AWM__A, 4); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_SY_SYNC_LWM__A, 3); | |
| if (status < 0) | |
| goto error; | |
| /* QAM Slicer Settings */ | |
| status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, | |
| DRXK_QAM_SL_SIG_POWER_QAM16); | |
| if (status < 0) | |
| goto error; | |
| /* QAM Loop Controller Coeficients */ | |
| status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 80); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 20); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 32); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10); | |
| if (status < 0) | |
| goto error; | |
| /* QAM State Machine (FSM) Thresholds */ | |
| status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 140); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 50); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 95); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 120); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 230); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 105); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 24); | |
| if (status < 0) | |
| goto error; | |
| /* QAM FSM Tracking Parameters */ | |
| status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 220); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 25); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 6); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -24); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -65); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -127); | |
| if (status < 0) | |
| goto error; | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| /*============================================================================*/ | |
| /* | |
| * \brief QAM32 specific setup | |
| * \param demod instance of demod. | |
| * \return DRXStatus_t. | |
| */ | |
| static int set_qam32(struct drxk_state *state) | |
| { | |
| int status = 0; | |
| dprintk(1, "\n"); | |
| /* QAM Equalizer Setup */ | |
| /* Equalizer */ | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 6707); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 6707); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 6707); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 6707); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 6707); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 6707); | |
| if (status < 0) | |
| goto error; | |
| /* Decision Feedback Equalizer */ | |
| status = write16(state, QAM_DQ_QUAL_FUN0__A, 3); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN1__A, 3); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN2__A, 3); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN3__A, 3); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN4__A, 3); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN5__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_SY_SYNC_HWM__A, 6); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_SY_SYNC_AWM__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_SY_SYNC_LWM__A, 3); | |
| if (status < 0) | |
| goto error; | |
| /* QAM Slicer Settings */ | |
| status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, | |
| DRXK_QAM_SL_SIG_POWER_QAM32); | |
| if (status < 0) | |
| goto error; | |
| /* QAM Loop Controller Coeficients */ | |
| status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 20); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 80); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 20); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 0); | |
| if (status < 0) | |
| goto error; | |
| /* QAM State Machine (FSM) Thresholds */ | |
| status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 90); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 50); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 170); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 100); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 10); | |
| if (status < 0) | |
| goto error; | |
| /* QAM FSM Tracking Parameters */ | |
| status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 12); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 140); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) -8); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) -16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -26); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -56); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -86); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| /*============================================================================*/ | |
| /* | |
| * \brief QAM64 specific setup | |
| * \param demod instance of demod. | |
| * \return DRXStatus_t. | |
| */ | |
| static int set_qam64(struct drxk_state *state) | |
| { | |
| int status = 0; | |
| dprintk(1, "\n"); | |
| /* QAM Equalizer Setup */ | |
| /* Equalizer */ | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 13336); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 12618); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 11988); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 13809); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13809); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 15609); | |
| if (status < 0) | |
| goto error; | |
| /* Decision Feedback Equalizer */ | |
| status = write16(state, QAM_DQ_QUAL_FUN0__A, 4); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN1__A, 4); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN2__A, 4); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN3__A, 4); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN4__A, 3); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN5__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_SY_SYNC_HWM__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_SY_SYNC_AWM__A, 4); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_SY_SYNC_LWM__A, 3); | |
| if (status < 0) | |
| goto error; | |
| /* QAM Slicer Settings */ | |
| status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, | |
| DRXK_QAM_SL_SIG_POWER_QAM64); | |
| if (status < 0) | |
| goto error; | |
| /* QAM Loop Controller Coeficients */ | |
| status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 30); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 100); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 30); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 50); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 48); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10); | |
| if (status < 0) | |
| goto error; | |
| /* QAM State Machine (FSM) Thresholds */ | |
| status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 100); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 110); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 200); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 95); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 15); | |
| if (status < 0) | |
| goto error; | |
| /* QAM FSM Tracking Parameters */ | |
| status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 12); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 141); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 7); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -15); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -45); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -80); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| /*============================================================================*/ | |
| /* | |
| * \brief QAM128 specific setup | |
| * \param demod: instance of demod. | |
| * \return DRXStatus_t. | |
| */ | |
| static int set_qam128(struct drxk_state *state) | |
| { | |
| int status = 0; | |
| dprintk(1, "\n"); | |
| /* QAM Equalizer Setup */ | |
| /* Equalizer */ | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 6564); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 6598); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 6394); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 6409); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 6656); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 7238); | |
| if (status < 0) | |
| goto error; | |
| /* Decision Feedback Equalizer */ | |
| status = write16(state, QAM_DQ_QUAL_FUN0__A, 6); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN1__A, 6); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN2__A, 6); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN3__A, 6); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN4__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN5__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_SY_SYNC_HWM__A, 6); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_SY_SYNC_AWM__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_SY_SYNC_LWM__A, 3); | |
| if (status < 0) | |
| goto error; | |
| /* QAM Slicer Settings */ | |
| status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, | |
| DRXK_QAM_SL_SIG_POWER_QAM128); | |
| if (status < 0) | |
| goto error; | |
| /* QAM Loop Controller Coeficients */ | |
| status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 40); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 120); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 40); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 60); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 64); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 0); | |
| if (status < 0) | |
| goto error; | |
| /* QAM State Machine (FSM) Thresholds */ | |
| status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 50); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 140); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 100); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 12); | |
| if (status < 0) | |
| goto error; | |
| /* QAM FSM Tracking Parameters */ | |
| status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 8); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 65); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 3); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) -1); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) -12); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -23); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| /*============================================================================*/ | |
| /* | |
| * \brief QAM256 specific setup | |
| * \param demod: instance of demod. | |
| * \return DRXStatus_t. | |
| */ | |
| static int set_qam256(struct drxk_state *state) | |
| { | |
| int status = 0; | |
| dprintk(1, "\n"); | |
| /* QAM Equalizer Setup */ | |
| /* Equalizer */ | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD0__A, 11502); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD1__A, 12084); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD2__A, 12543); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD3__A, 12931); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD4__A, 13629); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_EQ_CMA_RAD5__A, 15385); | |
| if (status < 0) | |
| goto error; | |
| /* Decision Feedback Equalizer */ | |
| status = write16(state, QAM_DQ_QUAL_FUN0__A, 8); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN1__A, 8); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN2__A, 8); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN3__A, 8); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN4__A, 6); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_DQ_QUAL_FUN5__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_SY_SYNC_HWM__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_SY_SYNC_AWM__A, 4); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_SY_SYNC_LWM__A, 3); | |
| if (status < 0) | |
| goto error; | |
| /* QAM Slicer Settings */ | |
| status = write16(state, SCU_RAM_QAM_SL_SIG_POWER__A, | |
| DRXK_QAM_SL_SIG_POWER_QAM256); | |
| if (status < 0) | |
| goto error; | |
| /* QAM Loop Controller Coeficients */ | |
| status = write16(state, SCU_RAM_QAM_LC_CA_FINE__A, 15); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CA_COARSE__A, 40); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EP_FINE__A, 12); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EP_MEDIUM__A, 24); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EP_COARSE__A, 24); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EI_FINE__A, 12); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EI_MEDIUM__A, 16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_EI_COARSE__A, 16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CP_FINE__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CP_MEDIUM__A, 50); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CP_COARSE__A, 250); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CI_FINE__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CI_MEDIUM__A, 50); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CI_COARSE__A, 125); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF_FINE__A, 16); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF_MEDIUM__A, 25); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF_COARSE__A, 48); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF1_FINE__A, 5); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF1_MEDIUM__A, 10); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_LC_CF1_COARSE__A, 10); | |
| if (status < 0) | |
| goto error; | |
| /* QAM State Machine (FSM) Thresholds */ | |
| status = write16(state, SCU_RAM_QAM_FSM_RTH__A, 50); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_FTH__A, 60); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_CTH__A, 80); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_PTH__A, 100); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_QTH__A, 150); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_MTH__A, 110); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_RATE_LIM__A, 40); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_COUNT_LIM__A, 4); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_FREQ_LIM__A, 12); | |
| if (status < 0) | |
| goto error; | |
| /* QAM FSM Tracking Parameters */ | |
| status = write16(state, SCU_RAM_QAM_FSM_MEDIAN_AV_MULT__A, (u16) 8); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_RADIUS_AV_LIMIT__A, (u16) 74); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET1__A, (u16) 18); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET2__A, (u16) 13); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET3__A, (u16) 7); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET4__A, (u16) 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_RAM_QAM_FSM_LCAVG_OFFSET5__A, (u16) -8); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| /*============================================================================*/ | |
| /* | |
| * \brief Reset QAM block. | |
| * \param demod: instance of demod. | |
| * \param channel: pointer to channel data. | |
| * \return DRXStatus_t. | |
| */ | |
| static int qam_reset_qam(struct drxk_state *state) | |
| { | |
| int status; | |
| u16 cmd_result; | |
| dprintk(1, "\n"); | |
| /* Stop QAM comstate->m_exec */ | |
| status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_STOP); | |
| if (status < 0) | |
| goto error; | |
| status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | |
| | SCU_RAM_COMMAND_CMD_DEMOD_RESET, | |
| 0, NULL, 1, &cmd_result); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| /*============================================================================*/ | |
| /* | |
| * \brief Set QAM symbolrate. | |
| * \param demod: instance of demod. | |
| * \param channel: pointer to channel data. | |
| * \return DRXStatus_t. | |
| */ | |
| static int qam_set_symbolrate(struct drxk_state *state) | |
| { | |
| u32 adc_frequency = 0; | |
| u32 symb_freq = 0; | |
| u32 iqm_rc_rate = 0; | |
| u16 ratesel = 0; | |
| u32 lc_symb_rate = 0; | |
| int status; | |
| dprintk(1, "\n"); | |
| /* Select & calculate correct IQM rate */ | |
| adc_frequency = (state->m_sys_clock_freq * 1000) / 3; | |
| ratesel = 0; | |
| if (state->props.symbol_rate <= 1188750) | |
| ratesel = 3; | |
| else if (state->props.symbol_rate <= 2377500) | |
| ratesel = 2; | |
| else if (state->props.symbol_rate <= 4755000) | |
| ratesel = 1; | |
| status = write16(state, IQM_FD_RATESEL__A, ratesel); | |
| if (status < 0) | |
| goto error; | |
| /* | |
| IqmRcRate = ((Fadc / (symbolrate * (4<<ratesel))) - 1) * (1<<23) | |
| */ | |
| symb_freq = state->props.symbol_rate * (1 << ratesel); | |
| if (symb_freq == 0) { | |
| /* Divide by zero */ | |
| status = -EINVAL; | |
| goto error; | |
| } | |
| iqm_rc_rate = (adc_frequency / symb_freq) * (1 << 21) + | |
| (Frac28a((adc_frequency % symb_freq), symb_freq) >> 7) - | |
| (1 << 23); | |
| status = write32(state, IQM_RC_RATE_OFS_LO__A, iqm_rc_rate); | |
| if (status < 0) | |
| goto error; | |
| state->m_iqm_rc_rate = iqm_rc_rate; | |
| /* | |
| LcSymbFreq = round (.125 * symbolrate / adc_freq * (1<<15)) | |
| */ | |
| symb_freq = state->props.symbol_rate; | |
| if (adc_frequency == 0) { | |
| /* Divide by zero */ | |
| status = -EINVAL; | |
| goto error; | |
| } | |
| lc_symb_rate = (symb_freq / adc_frequency) * (1 << 12) + | |
| (Frac28a((symb_freq % adc_frequency), adc_frequency) >> | |
| 16); | |
| if (lc_symb_rate > 511) | |
| lc_symb_rate = 511; | |
| status = write16(state, QAM_LC_SYMBOL_FREQ__A, (u16) lc_symb_rate); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| /*============================================================================*/ | |
| /* | |
| * \brief Get QAM lock status. | |
| * \param demod: instance of demod. | |
| * \param channel: pointer to channel data. | |
| * \return DRXStatus_t. | |
| */ | |
| static int get_qam_lock_status(struct drxk_state *state, u32 *p_lock_status) | |
| { | |
| int status; | |
| u16 result[2] = { 0, 0 }; | |
| dprintk(1, "\n"); | |
| *p_lock_status = NOT_LOCKED; | |
| status = scu_command(state, | |
| SCU_RAM_COMMAND_STANDARD_QAM | | |
| SCU_RAM_COMMAND_CMD_DEMOD_GET_LOCK, 0, NULL, 2, | |
| result); | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| if (result[1] < SCU_RAM_QAM_LOCKED_LOCKED_DEMOD_LOCKED) { | |
| /* 0x0000 NOT LOCKED */ | |
| } else if (result[1] < SCU_RAM_QAM_LOCKED_LOCKED_LOCKED) { | |
| /* 0x4000 DEMOD LOCKED */ | |
| *p_lock_status = DEMOD_LOCK; | |
| } else if (result[1] < SCU_RAM_QAM_LOCKED_LOCKED_NEVER_LOCK) { | |
| /* 0x8000 DEMOD + FEC LOCKED (system lock) */ | |
| *p_lock_status = MPEG_LOCK; | |
| } else { | |
| /* 0xC000 NEVER LOCKED */ | |
| /* (system will never be able to lock to the signal) */ | |
| /* | |
| * TODO: check this, intermediate & standard specific lock | |
| * states are not taken into account here | |
| */ | |
| *p_lock_status = NEVER_LOCK; | |
| } | |
| return status; | |
| } | |
| #define QAM_MIRROR__M 0x03 | |
| #define QAM_MIRROR_NORMAL 0x00 | |
| #define QAM_MIRRORED 0x01 | |
| #define QAM_MIRROR_AUTO_ON 0x02 | |
| #define QAM_LOCKRANGE__M 0x10 | |
| #define QAM_LOCKRANGE_NORMAL 0x10 | |
| static int qam_demodulator_command(struct drxk_state *state, | |
| int number_of_parameters) | |
| { | |
| int status; | |
| u16 cmd_result; | |
| u16 set_param_parameters[4] = { 0, 0, 0, 0 }; | |
| set_param_parameters[0] = state->m_constellation; /* modulation */ | |
| set_param_parameters[1] = DRXK_QAM_I12_J17; /* interleave mode */ | |
| if (number_of_parameters == 2) { | |
| u16 set_env_parameters[1] = { 0 }; | |
| if (state->m_operation_mode == OM_QAM_ITU_C) | |
| set_env_parameters[0] = QAM_TOP_ANNEX_C; | |
| else | |
| set_env_parameters[0] = QAM_TOP_ANNEX_A; | |
| status = scu_command(state, | |
| SCU_RAM_COMMAND_STANDARD_QAM | |
| | SCU_RAM_COMMAND_CMD_DEMOD_SET_ENV, | |
| 1, set_env_parameters, 1, &cmd_result); | |
| if (status < 0) | |
| goto error; | |
| status = scu_command(state, | |
| SCU_RAM_COMMAND_STANDARD_QAM | |
| | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM, | |
| number_of_parameters, set_param_parameters, | |
| 1, &cmd_result); | |
| } else if (number_of_parameters == 4) { | |
| if (state->m_operation_mode == OM_QAM_ITU_C) | |
| set_param_parameters[2] = QAM_TOP_ANNEX_C; | |
| else | |
| set_param_parameters[2] = QAM_TOP_ANNEX_A; | |
| set_param_parameters[3] |= (QAM_MIRROR_AUTO_ON); | |
| /* Env parameters */ | |
| /* check for LOCKRANGE Extented */ | |
| /* set_param_parameters[3] |= QAM_LOCKRANGE_NORMAL; */ | |
| status = scu_command(state, | |
| SCU_RAM_COMMAND_STANDARD_QAM | |
| | SCU_RAM_COMMAND_CMD_DEMOD_SET_PARAM, | |
| number_of_parameters, set_param_parameters, | |
| 1, &cmd_result); | |
| } else { | |
| pr_warn("Unknown QAM demodulator parameter count %d\n", | |
| number_of_parameters); | |
| status = -EINVAL; | |
| } | |
| error: | |
| if (status < 0) | |
| pr_warn("Warning %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int set_qam(struct drxk_state *state, u16 intermediate_freqk_hz, | |
| s32 tuner_freq_offset) | |
| { | |
| int status; | |
| u16 cmd_result; | |
| int qam_demod_param_count = state->qam_demod_parameter_count; | |
| dprintk(1, "\n"); | |
| /* | |
| * STEP 1: reset demodulator | |
| * resets FEC DI and FEC RS | |
| * resets QAM block | |
| * resets SCU variables | |
| */ | |
| status = write16(state, FEC_DI_COMM_EXEC__A, FEC_DI_COMM_EXEC_STOP); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_RS_COMM_EXEC__A, FEC_RS_COMM_EXEC_STOP); | |
| if (status < 0) | |
| goto error; | |
| status = qam_reset_qam(state); | |
| if (status < 0) | |
| goto error; | |
| /* | |
| * STEP 2: configure demodulator | |
| * -set params; resets IQM,QAM,FEC HW; initializes some | |
| * SCU variables | |
| */ | |
| status = qam_set_symbolrate(state); | |
| if (status < 0) | |
| goto error; | |
| /* Set params */ | |
| switch (state->props.modulation) { | |
| case QAM_256: | |
| state->m_constellation = DRX_CONSTELLATION_QAM256; | |
| break; | |
| case QAM_AUTO: | |
| case QAM_64: | |
| state->m_constellation = DRX_CONSTELLATION_QAM64; | |
| break; | |
| case QAM_16: | |
| state->m_constellation = DRX_CONSTELLATION_QAM16; | |
| break; | |
| case QAM_32: | |
| state->m_constellation = DRX_CONSTELLATION_QAM32; | |
| break; | |
| case QAM_128: | |
| state->m_constellation = DRX_CONSTELLATION_QAM128; | |
| break; | |
| default: | |
| status = -EINVAL; | |
| break; | |
| } | |
| if (status < 0) | |
| goto error; | |
| /* Use the 4-parameter if it's requested or we're probing for | |
| * the correct command. */ | |
| if (state->qam_demod_parameter_count == 4 | |
| || !state->qam_demod_parameter_count) { | |
| qam_demod_param_count = 4; | |
| status = qam_demodulator_command(state, qam_demod_param_count); | |
| } | |
| /* Use the 2-parameter command if it was requested or if we're | |
| * probing for the correct command and the 4-parameter command | |
| * failed. */ | |
| if (state->qam_demod_parameter_count == 2 | |
| || (!state->qam_demod_parameter_count && status < 0)) { | |
| qam_demod_param_count = 2; | |
| status = qam_demodulator_command(state, qam_demod_param_count); | |
| } | |
| if (status < 0) { | |
| dprintk(1, "Could not set demodulator parameters.\n"); | |
| dprintk(1, | |
| "Make sure qam_demod_parameter_count (%d) is correct for your firmware (%s).\n", | |
| state->qam_demod_parameter_count, | |
| state->microcode_name); | |
| goto error; | |
| } else if (!state->qam_demod_parameter_count) { | |
| dprintk(1, | |
| "Auto-probing the QAM command parameters was successful - using %d parameters.\n", | |
| qam_demod_param_count); | |
| /* | |
| * One of our commands was successful. We don't need to | |
| * auto-probe anymore, now that we got the correct command. | |
| */ | |
| state->qam_demod_parameter_count = qam_demod_param_count; | |
| } | |
| /* | |
| * STEP 3: enable the system in a mode where the ADC provides valid | |
| * signal setup modulation independent registers | |
| */ | |
| #if 0 | |
| status = set_frequency(channel, tuner_freq_offset)); | |
| if (status < 0) | |
| goto error; | |
| #endif | |
| status = set_frequency_shifter(state, intermediate_freqk_hz, | |
| tuner_freq_offset, true); | |
| if (status < 0) | |
| goto error; | |
| /* Setup BER measurement */ | |
| status = set_qam_measurement(state, state->m_constellation, | |
| state->props.symbol_rate); | |
| if (status < 0) | |
| goto error; | |
| /* Reset default values */ | |
| status = write16(state, IQM_CF_SCALE_SH__A, IQM_CF_SCALE_SH__PRE); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_SY_TIMEOUT__A, QAM_SY_TIMEOUT__PRE); | |
| if (status < 0) | |
| goto error; | |
| /* Reset default LC values */ | |
| status = write16(state, QAM_LC_RATE_LIMIT__A, 3); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_LC_LPF_FACTORP__A, 4); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_LC_LPF_FACTORI__A, 4); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_LC_MODE__A, 7); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_LC_QUAL_TAB0__A, 1); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_LC_QUAL_TAB1__A, 1); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_LC_QUAL_TAB2__A, 1); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_LC_QUAL_TAB3__A, 1); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_LC_QUAL_TAB4__A, 2); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_LC_QUAL_TAB5__A, 2); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_LC_QUAL_TAB6__A, 2); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_LC_QUAL_TAB8__A, 2); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_LC_QUAL_TAB9__A, 2); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_LC_QUAL_TAB10__A, 2); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_LC_QUAL_TAB12__A, 2); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_LC_QUAL_TAB15__A, 3); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_LC_QUAL_TAB16__A, 3); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_LC_QUAL_TAB20__A, 4); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_LC_QUAL_TAB25__A, 4); | |
| if (status < 0) | |
| goto error; | |
| /* Mirroring, QAM-block starting point not inverted */ | |
| status = write16(state, QAM_SY_SP_INV__A, | |
| QAM_SY_SP_INV_SPECTRUM_INV_DIS); | |
| if (status < 0) | |
| goto error; | |
| /* Halt SCU to enable safe non-atomic accesses */ | |
| status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD); | |
| if (status < 0) | |
| goto error; | |
| /* STEP 4: modulation specific setup */ | |
| switch (state->props.modulation) { | |
| case QAM_16: | |
| status = set_qam16(state); | |
| break; | |
| case QAM_32: | |
| status = set_qam32(state); | |
| break; | |
| case QAM_AUTO: | |
| case QAM_64: | |
| status = set_qam64(state); | |
| break; | |
| case QAM_128: | |
| status = set_qam128(state); | |
| break; | |
| case QAM_256: | |
| status = set_qam256(state); | |
| break; | |
| default: | |
| status = -EINVAL; | |
| break; | |
| } | |
| if (status < 0) | |
| goto error; | |
| /* Activate SCU to enable SCU commands */ | |
| status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE); | |
| if (status < 0) | |
| goto error; | |
| /* Re-configure MPEG output, requires knowledge of channel bitrate */ | |
| /* extAttr->currentChannel.modulation = channel->modulation; */ | |
| /* extAttr->currentChannel.symbolrate = channel->symbolrate; */ | |
| status = mpegts_dto_setup(state, state->m_operation_mode); | |
| if (status < 0) | |
| goto error; | |
| /* start processes */ | |
| status = mpegts_start(state); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_ACTIVE); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, QAM_COMM_EXEC__A, QAM_COMM_EXEC_ACTIVE); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_ACTIVE); | |
| if (status < 0) | |
| goto error; | |
| /* STEP 5: start QAM demodulator (starts FEC, QAM and IQM HW) */ | |
| status = scu_command(state, SCU_RAM_COMMAND_STANDARD_QAM | |
| | SCU_RAM_COMMAND_CMD_DEMOD_START, | |
| 0, NULL, 1, &cmd_result); | |
| if (status < 0) | |
| goto error; | |
| /* update global DRXK data container */ | |
| /*? extAttr->qamInterleaveMode = DRXK_QAM_I12_J17; */ | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int set_qam_standard(struct drxk_state *state, | |
| enum operation_mode o_mode) | |
| { | |
| int status; | |
| #ifdef DRXK_QAM_TAPS | |
| #define DRXK_QAMA_TAPS_SELECT | |
| #include "drxk_filters.h" | |
| #undef DRXK_QAMA_TAPS_SELECT | |
| #endif | |
| dprintk(1, "\n"); | |
| /* added antenna switch */ | |
| switch_antenna_to_qam(state); | |
| /* Ensure correct power-up mode */ | |
| status = power_up_qam(state); | |
| if (status < 0) | |
| goto error; | |
| /* Reset QAM block */ | |
| status = qam_reset_qam(state); | |
| if (status < 0) | |
| goto error; | |
| /* Setup IQM */ | |
| status = write16(state, IQM_COMM_EXEC__A, IQM_COMM_EXEC_B_STOP); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_AF_AMUX__A, IQM_AF_AMUX_SIGNAL2ADC); | |
| if (status < 0) | |
| goto error; | |
| /* Upload IQM Channel Filter settings by | |
| boot loader from ROM table */ | |
| switch (o_mode) { | |
| case OM_QAM_ITU_A: | |
| status = bl_chain_cmd(state, DRXK_BL_ROM_OFFSET_TAPS_ITU_A, | |
| DRXK_BLCC_NR_ELEMENTS_TAPS, | |
| DRXK_BLC_TIMEOUT); | |
| break; | |
| case OM_QAM_ITU_C: | |
| status = bl_direct_cmd(state, IQM_CF_TAP_RE0__A, | |
| DRXK_BL_ROM_OFFSET_TAPS_ITU_C, | |
| DRXK_BLDC_NR_ELEMENTS_TAPS, | |
| DRXK_BLC_TIMEOUT); | |
| if (status < 0) | |
| goto error; | |
| status = bl_direct_cmd(state, | |
| IQM_CF_TAP_IM0__A, | |
| DRXK_BL_ROM_OFFSET_TAPS_ITU_C, | |
| DRXK_BLDC_NR_ELEMENTS_TAPS, | |
| DRXK_BLC_TIMEOUT); | |
| break; | |
| default: | |
| status = -EINVAL; | |
| } | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_CF_OUT_ENA__A, 1 << IQM_CF_OUT_ENA_QAM__B); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_CF_SYMMETRIC__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_CF_MIDTAP__A, | |
| ((1 << IQM_CF_MIDTAP_RE__B) | (1 << IQM_CF_MIDTAP_IM__B))); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_RC_STRETCH__A, 21); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_AF_CLP_LEN__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_AF_CLP_TH__A, 448); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_AF_SNS_LEN__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_CF_POW_MEAS_LEN__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_FS_ADJ_SEL__A, 1); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_RC_ADJ_SEL__A, 1); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_CF_ADJ_SEL__A, 1); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_AF_UPD_SEL__A, 0); | |
| if (status < 0) | |
| goto error; | |
| /* IQM Impulse Noise Processing Unit */ | |
| status = write16(state, IQM_CF_CLP_VAL__A, 500); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_CF_DATATH__A, 1000); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_CF_BYPASSDET__A, 1); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_CF_DET_LCT__A, 0); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_CF_WND_LEN__A, 1); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_CF_PKDTH__A, 1); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_AF_INC_BYPASS__A, 1); | |
| if (status < 0) | |
| goto error; | |
| /* turn on IQMAF. Must be done before setAgc**() */ | |
| status = set_iqm_af(state, true); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, IQM_AF_START_LOCK__A, 0x01); | |
| if (status < 0) | |
| goto error; | |
| /* IQM will not be reset from here, sync ADC and update/init AGC */ | |
| status = adc_synchronization(state); | |
| if (status < 0) | |
| goto error; | |
| /* Set the FSM step period */ | |
| status = write16(state, SCU_RAM_QAM_FSM_STEP_PERIOD__A, 2000); | |
| if (status < 0) | |
| goto error; | |
| /* Halt SCU to enable safe non-atomic accesses */ | |
| status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_HOLD); | |
| if (status < 0) | |
| goto error; | |
| /* No more resets of the IQM, current standard correctly set => | |
| now AGCs can be configured. */ | |
| status = init_agc(state, true); | |
| if (status < 0) | |
| goto error; | |
| status = set_pre_saw(state, &(state->m_qam_pre_saw_cfg)); | |
| if (status < 0) | |
| goto error; | |
| /* Configure AGC's */ | |
| status = set_agc_rf(state, &(state->m_qam_rf_agc_cfg), true); | |
| if (status < 0) | |
| goto error; | |
| status = set_agc_if(state, &(state->m_qam_if_agc_cfg), true); | |
| if (status < 0) | |
| goto error; | |
| /* Activate SCU to enable SCU commands */ | |
| status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int write_gpio(struct drxk_state *state) | |
| { | |
| int status; | |
| u16 value = 0; | |
| dprintk(1, "\n"); | |
| /* stop lock indicator process */ | |
| status = write16(state, SCU_RAM_GPIO__A, | |
| SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); | |
| if (status < 0) | |
| goto error; | |
| /* Write magic word to enable pdr reg write */ | |
| status = write16(state, SIO_TOP_COMM_KEY__A, SIO_TOP_COMM_KEY_KEY); | |
| if (status < 0) | |
| goto error; | |
| if (state->m_has_sawsw) { | |
| if (state->uio_mask & 0x0001) { /* UIO-1 */ | |
| /* write to io pad configuration register - output mode */ | |
| status = write16(state, SIO_PDR_SMA_TX_CFG__A, | |
| state->m_gpio_cfg); | |
| if (status < 0) | |
| goto error; | |
| /* use corresponding bit in io data output registar */ | |
| status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value); | |
| if (status < 0) | |
| goto error; | |
| if ((state->m_gpio & 0x0001) == 0) | |
| value &= 0x7FFF; /* write zero to 15th bit - 1st UIO */ | |
| else | |
| value |= 0x8000; /* write one to 15th bit - 1st UIO */ | |
| /* write back to io data output register */ | |
| status = write16(state, SIO_PDR_UIO_OUT_LO__A, value); | |
| if (status < 0) | |
| goto error; | |
| } | |
| if (state->uio_mask & 0x0002) { /* UIO-2 */ | |
| /* write to io pad configuration register - output mode */ | |
| status = write16(state, SIO_PDR_SMA_RX_CFG__A, | |
| state->m_gpio_cfg); | |
| if (status < 0) | |
| goto error; | |
| /* use corresponding bit in io data output registar */ | |
| status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value); | |
| if (status < 0) | |
| goto error; | |
| if ((state->m_gpio & 0x0002) == 0) | |
| value &= 0xBFFF; /* write zero to 14th bit - 2st UIO */ | |
| else | |
| value |= 0x4000; /* write one to 14th bit - 2st UIO */ | |
| /* write back to io data output register */ | |
| status = write16(state, SIO_PDR_UIO_OUT_LO__A, value); | |
| if (status < 0) | |
| goto error; | |
| } | |
| if (state->uio_mask & 0x0004) { /* UIO-3 */ | |
| /* write to io pad configuration register - output mode */ | |
| status = write16(state, SIO_PDR_GPIO_CFG__A, | |
| state->m_gpio_cfg); | |
| if (status < 0) | |
| goto error; | |
| /* use corresponding bit in io data output registar */ | |
| status = read16(state, SIO_PDR_UIO_OUT_LO__A, &value); | |
| if (status < 0) | |
| goto error; | |
| if ((state->m_gpio & 0x0004) == 0) | |
| value &= 0xFFFB; /* write zero to 2nd bit - 3rd UIO */ | |
| else | |
| value |= 0x0004; /* write one to 2nd bit - 3rd UIO */ | |
| /* write back to io data output register */ | |
| status = write16(state, SIO_PDR_UIO_OUT_LO__A, value); | |
| if (status < 0) | |
| goto error; | |
| } | |
| } | |
| /* Write magic word to disable pdr reg write */ | |
| status = write16(state, SIO_TOP_COMM_KEY__A, 0x0000); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int switch_antenna_to_qam(struct drxk_state *state) | |
| { | |
| int status = 0; | |
| bool gpio_state; | |
| dprintk(1, "\n"); | |
| if (!state->antenna_gpio) | |
| return 0; | |
| gpio_state = state->m_gpio & state->antenna_gpio; | |
| if (state->antenna_dvbt ^ gpio_state) { | |
| /* Antenna is on DVB-T mode. Switch */ | |
| if (state->antenna_dvbt) | |
| state->m_gpio &= ~state->antenna_gpio; | |
| else | |
| state->m_gpio |= state->antenna_gpio; | |
| status = write_gpio(state); | |
| } | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int switch_antenna_to_dvbt(struct drxk_state *state) | |
| { | |
| int status = 0; | |
| bool gpio_state; | |
| dprintk(1, "\n"); | |
| if (!state->antenna_gpio) | |
| return 0; | |
| gpio_state = state->m_gpio & state->antenna_gpio; | |
| if (!(state->antenna_dvbt ^ gpio_state)) { | |
| /* Antenna is on DVB-C mode. Switch */ | |
| if (state->antenna_dvbt) | |
| state->m_gpio |= state->antenna_gpio; | |
| else | |
| state->m_gpio &= ~state->antenna_gpio; | |
| status = write_gpio(state); | |
| } | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int power_down_device(struct drxk_state *state) | |
| { | |
| /* Power down to requested mode */ | |
| /* Backup some register settings */ | |
| /* Set pins with possible pull-ups connected to them in input mode */ | |
| /* Analog power down */ | |
| /* ADC power down */ | |
| /* Power down device */ | |
| int status; | |
| dprintk(1, "\n"); | |
| if (state->m_b_p_down_open_bridge) { | |
| /* Open I2C bridge before power down of DRXK */ | |
| status = ConfigureI2CBridge(state, true); | |
| if (status < 0) | |
| goto error; | |
| } | |
| /* driver 0.9.0 */ | |
| status = dvbt_enable_ofdm_token_ring(state, false); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_CC_PWD_MODE__A, | |
| SIO_CC_PWD_MODE_LEVEL_CLOCK); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY); | |
| if (status < 0) | |
| goto error; | |
| state->m_hi_cfg_ctrl |= SIO_HI_RA_RAM_PAR_5_CFG_SLEEP_ZZZ; | |
| status = hi_cfg_command(state); | |
| error: | |
| if (status < 0) | |
| pr_err("Error %d on %s\n", status, __func__); | |
| return status; | |
| } | |
| static int init_drxk(struct drxk_state *state) | |
| { | |
| int status = 0, n = 0; | |
| enum drx_power_mode power_mode = DRXK_POWER_DOWN_OFDM; | |
| u16 driver_version; | |
| dprintk(1, "\n"); | |
| if (state->m_drxk_state == DRXK_UNINITIALIZED) { | |
| drxk_i2c_lock(state); | |
| status = power_up_device(state); | |
| if (status < 0) | |
| goto error; | |
| status = drxx_open(state); | |
| if (status < 0) | |
| goto error; | |
| /* Soft reset of OFDM-, sys- and osc-clockdomain */ | |
| status = write16(state, SIO_CC_SOFT_RST__A, | |
| SIO_CC_SOFT_RST_OFDM__M | |
| | SIO_CC_SOFT_RST_SYS__M | |
| | SIO_CC_SOFT_RST_OSC__M); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SIO_CC_UPDATE__A, SIO_CC_UPDATE_KEY); | |
| if (status < 0) | |
| goto error; | |
| /* | |
| * TODO is this needed? If yes, how much delay in | |
| * worst case scenario | |
| */ | |
| usleep_range(1000, 2000); | |
| state->m_drxk_a3_patch_code = true; | |
| status = get_device_capabilities(state); | |
| if (status < 0) | |
| goto error; | |
| /* Bridge delay, uses oscilator clock */ | |
| /* Delay = (delay (nano seconds) * oscclk (kHz))/ 1000 */ | |
| /* SDA brdige delay */ | |
| state->m_hi_cfg_bridge_delay = | |
| (u16) ((state->m_osc_clock_freq / 1000) * | |
| HI_I2C_BRIDGE_DELAY) / 1000; | |
| /* Clipping */ | |
| if (state->m_hi_cfg_bridge_delay > | |
| SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M) { | |
| state->m_hi_cfg_bridge_delay = | |
| SIO_HI_RA_RAM_PAR_3_CFG_DBL_SDA__M; | |
| } | |
| /* SCL bridge delay, same as SDA for now */ | |
| state->m_hi_cfg_bridge_delay += | |
| state->m_hi_cfg_bridge_delay << | |
| SIO_HI_RA_RAM_PAR_3_CFG_DBL_SCL__B; | |
| status = init_hi(state); | |
| if (status < 0) | |
| goto error; | |
| /* disable various processes */ | |
| #if NOA1ROM | |
| if (!(state->m_DRXK_A1_ROM_CODE) | |
| && !(state->m_DRXK_A2_ROM_CODE)) | |
| #endif | |
| { | |
| status = write16(state, SCU_RAM_GPIO__A, | |
| SCU_RAM_GPIO_HW_LOCK_IND_DISABLE); | |
| if (status < 0) | |
| goto error; | |
| } | |
| /* disable MPEG port */ | |
| status = mpegts_disable(state); | |
| if (status < 0) | |
| goto error; | |
| /* Stop AUD and SCU */ | |
| status = write16(state, AUD_COMM_EXEC__A, AUD_COMM_EXEC_STOP); | |
| if (status < 0) | |
| goto error; | |
| status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_STOP); | |
| if (status < 0) | |
| goto error; | |
| /* enable token-ring bus through OFDM block for possible ucode upload */ | |
| status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, | |
| SIO_OFDM_SH_OFDM_RING_ENABLE_ON); | |
| if (status < 0) | |
| goto error; | |
| /* include boot loader section */ | |
| status = write16(state, SIO_BL_COMM_EXEC__A, | |
| SIO_BL_COMM_EXEC_ACTIVE); | |
| if (status < 0) | |
| goto error; | |
| status = bl_chain_cmd(state, 0, 6, 100); | |
| if (status < 0) | |
| goto error; | |
| if (state->fw) { | |
| status = download_microcode(state, state->fw->data, | |
| state->fw->size); | |
| if (status < 0) | |
| goto error; | |
| } | |
| /* disable token-ring bus through OFDM block for possible ucode upload */ | |
| status = write16(state, SIO_OFDM_SH_OFDM_RING_ENABLE__A, | |
| SIO_OFDM_SH_OFDM_RING_ENABLE_OFF); | |
| if (status < 0) | |
| goto error; | |
| /* Run SCU for a little while to initialize microcode version numbers */ | |
| status = write16(state, SCU_COMM_EXEC__A, SCU_COMM_EXEC_ACTIVE); | |
| if (status < 0) | |
| goto error; | |
| status = drxx_open(state); | |
| if (status < 0) | |
| goto error; | |
| /* added for test */ | |
| msleep(30); | |
| power_mode = DRXK_POWER_DOWN_OFDM; | |
| status = ctrl_power_mode(state, &power_mode); | |
| if (status < 0) | |
| goto error; | |
| /* Stamp driver version number in SCU data RAM in BCD code | |
| Done to enable field application engineers to retrieve drxdriver version | |
| via I2C from SCU RAM. | |
| Not using SCU command interface for SCU register access since no | |
| microcode may be present. | |
| */ | |
| driver_version = | |
| (((DRXK_VERSION_MAJOR / 100) % 10) << 12) + | |
| (((DRXK_VERSION_MAJOR / 10) % 10) << 8) + | |
| ((DRXK_VERSION_MAJOR % 10) << 4) + | |
| (DRXK_VERSION_MINOR % 10); | |
| status = write16(state, SCU_RAM_DRIVER_VER_HI__A, | |
| driver_version); | |
| if (status < 0) | |
| goto error; | |
| driver_version = | |
| (((DRXK_VERSION_PATCH / 1000) % 10) << 12) + | |
| (((DRXK_VERSION_PATCH / 100) % 10) << 8) + | |
| (((DRXK_VERSION_PATCH / 10) % 10) << 4) + | |
| (DRXK_VERSION_PATCH % 10); | |
| status = write16(state, SCU_RAM_DRIVER_VER_LO__A, | |
| driver_version); | |
| if (status < 0) | |
| goto error; | |
| pr_info("DRXK driver version %d.%d.%d\n", | |
| DRXK_VERSION_MAJOR, DRXK_VERSION_MINOR, | |
| DRXK_VERSION_PATCH); | |
| /* | |
| * Dirty fix of default values for ROM/PATCH microcode | |
| * Dirty because this fix makes it impossible to setup | |
| * suitable values before calling DRX_Open. This solution | |
| * requires changes to RF AGC speed to be done via the CTRL | |
| * function after calling DRX_Open | |
| */ | |
| /* m_dvbt_rf_agc_cfg.speed = 3; */ | |
| /* Reset driver debug flags to 0 */ | |
| status = write16(state, SCU_RAM_DRIVER_DEBUG__A, 0); | |
| if (status < 0) | |
| goto error; | |
| /* driver 0.9.0 */ | |
| /* Setup FEC OC: | |
| NOTE: No more full FEC resets allowed afterwards!! */ | |
| status = write16(state, FEC_COMM_EXEC__A, FEC_COMM_EXEC_STOP); | |
| if (status < 0) | |
| goto error; | |
| /* MPEGTS functions are still the same */ | |
| status = mpegts_dto_init(state); | |
| if (status < 0) | |
| goto error; | |
| status = mpegts_stop(state); | |
| if (status < 0) | |
| goto error; | |
| status = mpegts_configure_polarity(state); | |
| if (status < 0) | |
| goto error; | |
| status = mpegts_configure_pins(state, state->m_enable_mpeg_output); | |
| if (status < 0) | |
| goto error; | |
| /* added: configure GPIO */ | |
| status = write_gpio(state); | |
| if (status < 0) | |
| goto error; | |
| state->m_drxk_state = DRXK_STOPPED; | |
| if (state->m_b_power_down) { | |
| status = power_down_device(state); | |
| if (status < 0) | |
| goto error; | |
| state->m_drxk_state = DRXK_POWERED_DOWN; | |
| } else | |
| state->m_drxk_state = DRXK_STOPPED; | |
| /* Initialize the supported delivery systems */ | |
| n = 0; | |
| if (state->m_has_dvbc) { | |
| state->frontend.ops.delsys[n++] = SYS_DVBC_ANNEX_A; | |
| state->frontend.ops.delsys[n++] = SYS_DVBC_ANNEX_C; | |
| strlcat(state->frontend.ops.info.name, " DVB-C", | |
| sizeof(state->frontend.ops.info.name)); | |
| } | |
| if (state->m_has_dvbt) { | |
| state->frontend.ops.delsys[n++] = SYS_DVBT; | |
| strlcat(state->frontend.ops.info.name, " DVB-T", | |
| sizeof(state->frontend.ops.info.name)); | |
| } | |
| drxk_i2c_unlock(state); | |
| } | |
| error: | |
| if (status < 0) { | |
| state->m_drxk_state = DRXK_NO_DEV; | |
| drxk_i2c_unlock(state); | |
| pr_err("Error %d on %s\n", status, __func__); | |
| } | |
| return status; | |
| } | |
| static void load_firmware_cb(const struct firmware *fw, | |
| void *context) | |
| { | |
| struct drxk_state *state = context; | |
| dprintk(1, ": %s\n", fw ? "firmware loaded" : "firmware not loaded"); | |
| if (!fw) { | |
| pr_err("Could not load firmware file %s.\n", | |
| state->microcode_name); | |
| pr_info("Copy %s to your hotplug directory!\n", | |
| state->microcode_name); | |
| state->microcode_name = NULL; | |
| /* | |
| * As firmware is now load asynchronous, it is not possible | |
| * anymore to fail at frontend attach. We might silently | |
| * return here, and hope that the driver won't crash. | |
| * We might also change all DVB callbacks to return -ENODEV | |
| * if the device is not initialized. | |
| * As the DRX-K devices have their own internal firmware, | |
| * let's just hope that it will match a firmware revision | |
| * compatible with this driver and proceed. | |
| */ | |
| } | |
| state->fw = fw; | |
| init_drxk(state); | |
| } | |
| static void drxk_release(struct dvb_frontend *fe) | |
| { | |
| struct drxk_state *state = fe->demodulator_priv; | |
| dprintk(1, "\n"); | |
| release_firmware(state->fw); | |
| kfree(state); | |
| } | |
| static int drxk_sleep(struct dvb_frontend *fe) | |
| { | |
| struct drxk_state *state = fe->demodulator_priv; | |
| dprintk(1, "\n"); | |
| if (state->m_drxk_state == DRXK_NO_DEV) | |
| return -ENODEV; | |
| if (state->m_drxk_state == DRXK_UNINITIALIZED) | |
| return 0; | |
| shut_down(state); | |
| return 0; | |
| } | |
| static int drxk_gate_ctrl(struct dvb_frontend *fe, int enable) | |
| { | |
| struct drxk_state *state = fe->demodulator_priv; | |
| dprintk(1, ": %s\n", enable ? "enable" : "disable"); | |
| if (state->m_drxk_state == DRXK_NO_DEV) | |
| return -ENODEV; | |
| return ConfigureI2CBridge(state, enable ? true : false); | |
| } | |
| static int drxk_set_parameters(struct dvb_frontend *fe) | |
| { | |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; | |
| u32 delsys = p->delivery_system, old_delsys; | |
| struct drxk_state *state = fe->demodulator_priv; | |
| u32 IF; | |
| dprintk(1, "\n"); | |
| if (state->m_drxk_state == DRXK_NO_DEV) | |
| return -ENODEV; | |
| if (state->m_drxk_state == DRXK_UNINITIALIZED) | |
| return -EAGAIN; | |
| if (!fe->ops.tuner_ops.get_if_frequency) { | |
| pr_err("Error: get_if_frequency() not defined at tuner. Can't work without it!\n"); | |
| return -EINVAL; | |
| } | |
| if (fe->ops.i2c_gate_ctrl) | |
| fe->ops.i2c_gate_ctrl(fe, 1); | |
| if (fe->ops.tuner_ops.set_params) | |
| fe->ops.tuner_ops.set_params(fe); | |
| if (fe->ops.i2c_gate_ctrl) | |
| fe->ops.i2c_gate_ctrl(fe, 0); | |
| old_delsys = state->props.delivery_system; | |
| state->props = *p; | |
| if (old_delsys != delsys) { | |
| shut_down(state); | |
| switch (delsys) { | |
| case SYS_DVBC_ANNEX_A: | |
| case SYS_DVBC_ANNEX_C: | |
| if (!state->m_has_dvbc) | |
| return -EINVAL; | |
| state->m_itut_annex_c = (delsys == SYS_DVBC_ANNEX_C) ? | |
| true : false; | |
| if (state->m_itut_annex_c) | |
| setoperation_mode(state, OM_QAM_ITU_C); | |
| else | |
| setoperation_mode(state, OM_QAM_ITU_A); | |
| break; | |
| case SYS_DVBT: | |
| if (!state->m_has_dvbt) | |
| return -EINVAL; | |
| setoperation_mode(state, OM_DVBT); | |
| break; | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| fe->ops.tuner_ops.get_if_frequency(fe, &IF); | |
| start(state, 0, IF); | |
| /* After set_frontend, stats aren't available */ | |
| p->strength.stat[0].scale = FE_SCALE_RELATIVE; | |
| p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| p->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| p->pre_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| /* printk(KERN_DEBUG "drxk: %s IF=%d done\n", __func__, IF); */ | |
| return 0; | |
| } | |
| static int get_strength(struct drxk_state *state, u64 *strength) | |
| { | |
| int status; | |
| struct s_cfg_agc rf_agc, if_agc; | |
| u32 total_gain = 0; | |
| u32 atten = 0; | |
| u32 agc_range = 0; | |
| u16 scu_lvl = 0; | |
| u16 scu_coc = 0; | |
| /* FIXME: those are part of the tuner presets */ | |
| u16 tuner_rf_gain = 50; /* Default value on az6007 driver */ | |
| u16 tuner_if_gain = 40; /* Default value on az6007 driver */ | |
| *strength = 0; | |
| if (is_dvbt(state)) { | |
| rf_agc = state->m_dvbt_rf_agc_cfg; | |
| if_agc = state->m_dvbt_if_agc_cfg; | |
| } else if (is_qam(state)) { | |
| rf_agc = state->m_qam_rf_agc_cfg; | |
| if_agc = state->m_qam_if_agc_cfg; | |
| } else { | |
| rf_agc = state->m_atv_rf_agc_cfg; | |
| if_agc = state->m_atv_if_agc_cfg; | |
| } | |
| if (rf_agc.ctrl_mode == DRXK_AGC_CTRL_AUTO) { | |
| /* SCU output_level */ | |
| status = read16(state, SCU_RAM_AGC_RF_IACCU_HI__A, &scu_lvl); | |
| if (status < 0) | |
| return status; | |
| /* SCU c.o.c. */ | |
| status = read16(state, SCU_RAM_AGC_RF_IACCU_HI_CO__A, &scu_coc); | |
| if (status < 0) | |
| return status; | |
| if (((u32) scu_lvl + (u32) scu_coc) < 0xffff) | |
| rf_agc.output_level = scu_lvl + scu_coc; | |
| else | |
| rf_agc.output_level = 0xffff; | |
| /* Take RF gain into account */ | |
| total_gain += tuner_rf_gain; | |
| /* clip output value */ | |
| if (rf_agc.output_level < rf_agc.min_output_level) | |
| rf_agc.output_level = rf_agc.min_output_level; | |
| if (rf_agc.output_level > rf_agc.max_output_level) | |
| rf_agc.output_level = rf_agc.max_output_level; | |
| agc_range = (u32) (rf_agc.max_output_level - rf_agc.min_output_level); | |
| if (agc_range > 0) { | |
| atten += 100UL * | |
| ((u32)(tuner_rf_gain)) * | |
| ((u32)(rf_agc.output_level - rf_agc.min_output_level)) | |
| / agc_range; | |
| } | |
| } | |
| if (if_agc.ctrl_mode == DRXK_AGC_CTRL_AUTO) { | |
| status = read16(state, SCU_RAM_AGC_IF_IACCU_HI__A, | |
| &if_agc.output_level); | |
| if (status < 0) | |
| return status; | |
| status = read16(state, SCU_RAM_AGC_INGAIN_TGT_MIN__A, | |
| &if_agc.top); | |
| if (status < 0) | |
| return status; | |
| /* Take IF gain into account */ | |
| total_gain += (u32) tuner_if_gain; | |
| /* clip output value */ | |
| if (if_agc.output_level < if_agc.min_output_level) | |
| if_agc.output_level = if_agc.min_output_level; | |
| if (if_agc.output_level > if_agc.max_output_level) | |
| if_agc.output_level = if_agc.max_output_level; | |
| agc_range = (u32)(if_agc.max_output_level - if_agc.min_output_level); | |
| if (agc_range > 0) { | |
| atten += 100UL * | |
| ((u32)(tuner_if_gain)) * | |
| ((u32)(if_agc.output_level - if_agc.min_output_level)) | |
| / agc_range; | |
| } | |
| } | |
| /* | |
| * Convert to 0..65535 scale. | |
| * If it can't be measured (AGC is disabled), just show 100%. | |
| */ | |
| if (total_gain > 0) | |
| *strength = (65535UL * atten / total_gain / 100); | |
| else | |
| *strength = 65535; | |
| return 0; | |
| } | |
| static int drxk_get_stats(struct dvb_frontend *fe) | |
| { | |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
| struct drxk_state *state = fe->demodulator_priv; | |
| int status; | |
| u32 stat; | |
| u16 reg16; | |
| u32 post_bit_count; | |
| u32 post_bit_err_count; | |
| u32 post_bit_error_scale; | |
| u32 pre_bit_err_count; | |
| u32 pre_bit_count; | |
| u32 pkt_count; | |
| u32 pkt_error_count; | |
| s32 cnr; | |
| if (state->m_drxk_state == DRXK_NO_DEV) | |
| return -ENODEV; | |
| if (state->m_drxk_state == DRXK_UNINITIALIZED) | |
| return -EAGAIN; | |
| /* get status */ | |
| state->fe_status = 0; | |
| get_lock_status(state, &stat); | |
| if (stat == MPEG_LOCK) | |
| state->fe_status |= 0x1f; | |
| if (stat == FEC_LOCK) | |
| state->fe_status |= 0x0f; | |
| if (stat == DEMOD_LOCK) | |
| state->fe_status |= 0x07; | |
| /* | |
| * Estimate signal strength from AGC | |
| */ | |
| get_strength(state, &c->strength.stat[0].uvalue); | |
| c->strength.stat[0].scale = FE_SCALE_RELATIVE; | |
| if (stat >= DEMOD_LOCK) { | |
| get_signal_to_noise(state, &cnr); | |
| c->cnr.stat[0].svalue = cnr * 100; | |
| c->cnr.stat[0].scale = FE_SCALE_DECIBEL; | |
| } else { | |
| c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| } | |
| if (stat < FEC_LOCK) { | |
| c->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| c->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| c->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| c->pre_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| return 0; | |
| } | |
| /* Get post BER */ | |
| /* BER measurement is valid if at least FEC lock is achieved */ | |
| /* | |
| * OFDM_EC_VD_REQ_SMB_CNT__A and/or OFDM_EC_VD_REQ_BIT_CNT can be | |
| * written to set nr of symbols or bits over which to measure | |
| * EC_VD_REG_ERR_BIT_CNT__A . See CtrlSetCfg(). | |
| */ | |
| /* Read registers for post/preViterbi BER calculation */ | |
| status = read16(state, OFDM_EC_VD_ERR_BIT_CNT__A, ®16); | |
| if (status < 0) | |
| goto error; | |
| pre_bit_err_count = reg16; | |
| status = read16(state, OFDM_EC_VD_IN_BIT_CNT__A , ®16); | |
| if (status < 0) | |
| goto error; | |
| pre_bit_count = reg16; | |
| /* Number of bit-errors */ | |
| status = read16(state, FEC_RS_NR_BIT_ERRORS__A, ®16); | |
| if (status < 0) | |
| goto error; | |
| post_bit_err_count = reg16; | |
| status = read16(state, FEC_RS_MEASUREMENT_PRESCALE__A, ®16); | |
| if (status < 0) | |
| goto error; | |
| post_bit_error_scale = reg16; | |
| status = read16(state, FEC_RS_MEASUREMENT_PERIOD__A, ®16); | |
| if (status < 0) | |
| goto error; | |
| pkt_count = reg16; | |
| status = read16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, ®16); | |
| if (status < 0) | |
| goto error; | |
| pkt_error_count = reg16; | |
| write16(state, SCU_RAM_FEC_ACCUM_PKT_FAILURES__A, 0); | |
| post_bit_err_count *= post_bit_error_scale; | |
| post_bit_count = pkt_count * 204 * 8; | |
| /* Store the results */ | |
| c->block_error.stat[0].scale = FE_SCALE_COUNTER; | |
| c->block_error.stat[0].uvalue += pkt_error_count; | |
| c->block_count.stat[0].scale = FE_SCALE_COUNTER; | |
| c->block_count.stat[0].uvalue += pkt_count; | |
| c->pre_bit_error.stat[0].scale = FE_SCALE_COUNTER; | |
| c->pre_bit_error.stat[0].uvalue += pre_bit_err_count; | |
| c->pre_bit_count.stat[0].scale = FE_SCALE_COUNTER; | |
| c->pre_bit_count.stat[0].uvalue += pre_bit_count; | |
| c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER; | |
| c->post_bit_error.stat[0].uvalue += post_bit_err_count; | |
| c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER; | |
| c->post_bit_count.stat[0].uvalue += post_bit_count; | |
| error: | |
| return status; | |
| } | |
| static int drxk_read_status(struct dvb_frontend *fe, enum fe_status *status) | |
| { | |
| struct drxk_state *state = fe->demodulator_priv; | |
| int rc; | |
| dprintk(1, "\n"); | |
| rc = drxk_get_stats(fe); | |
| if (rc < 0) | |
| return rc; | |
| *status = state->fe_status; | |
| return 0; | |
| } | |
| static int drxk_read_signal_strength(struct dvb_frontend *fe, | |
| u16 *strength) | |
| { | |
| struct drxk_state *state = fe->demodulator_priv; | |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; | |
| dprintk(1, "\n"); | |
| if (state->m_drxk_state == DRXK_NO_DEV) | |
| return -ENODEV; | |
| if (state->m_drxk_state == DRXK_UNINITIALIZED) | |
| return -EAGAIN; | |
| *strength = c->strength.stat[0].uvalue; | |
| return 0; | |
| } | |
| static int drxk_read_snr(struct dvb_frontend *fe, u16 *snr) | |
| { | |
| struct drxk_state *state = fe->demodulator_priv; | |
| s32 snr2; | |
| dprintk(1, "\n"); | |
| if (state->m_drxk_state == DRXK_NO_DEV) | |
| return -ENODEV; | |
| if (state->m_drxk_state == DRXK_UNINITIALIZED) | |
| return -EAGAIN; | |
| get_signal_to_noise(state, &snr2); | |
| /* No negative SNR, clip to zero */ | |
| if (snr2 < 0) | |
| snr2 = 0; | |
| *snr = snr2 & 0xffff; | |
| return 0; | |
| } | |
| static int drxk_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) | |
| { | |
| struct drxk_state *state = fe->demodulator_priv; | |
| u16 err; | |
| dprintk(1, "\n"); | |
| if (state->m_drxk_state == DRXK_NO_DEV) | |
| return -ENODEV; | |
| if (state->m_drxk_state == DRXK_UNINITIALIZED) | |
| return -EAGAIN; | |
| dvbtqam_get_acc_pkt_err(state, &err); | |
| *ucblocks = (u32) err; | |
| return 0; | |
| } | |
| static int drxk_get_tune_settings(struct dvb_frontend *fe, | |
| struct dvb_frontend_tune_settings *sets) | |
| { | |
| struct drxk_state *state = fe->demodulator_priv; | |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; | |
| dprintk(1, "\n"); | |
| if (state->m_drxk_state == DRXK_NO_DEV) | |
| return -ENODEV; | |
| if (state->m_drxk_state == DRXK_UNINITIALIZED) | |
| return -EAGAIN; | |
| switch (p->delivery_system) { | |
| case SYS_DVBC_ANNEX_A: | |
| case SYS_DVBC_ANNEX_C: | |
| case SYS_DVBT: | |
| sets->min_delay_ms = 3000; | |
| sets->max_drift = 0; | |
| sets->step_size = 0; | |
| return 0; | |
| default: | |
| return -EINVAL; | |
| } | |
| } | |
| static const struct dvb_frontend_ops drxk_ops = { | |
| /* .delsys will be filled dynamically */ | |
| .info = { | |
| .name = "DRXK", | |
| .frequency_min = 47000000, | |
| .frequency_max = 865000000, | |
| /* For DVB-C */ | |
| .symbol_rate_min = 870000, | |
| .symbol_rate_max = 11700000, | |
| /* For DVB-T */ | |
| .frequency_stepsize = 166667, | |
| .caps = FE_CAN_QAM_16 | FE_CAN_QAM_32 | FE_CAN_QAM_64 | | |
| FE_CAN_QAM_128 | FE_CAN_QAM_256 | FE_CAN_FEC_AUTO | | |
| FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | | |
| FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_MUTE_TS | | |
| FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER | | |
| FE_CAN_GUARD_INTERVAL_AUTO | FE_CAN_HIERARCHY_AUTO | |
| }, | |
| .release = drxk_release, | |
| .sleep = drxk_sleep, | |
| .i2c_gate_ctrl = drxk_gate_ctrl, | |
| .set_frontend = drxk_set_parameters, | |
| .get_tune_settings = drxk_get_tune_settings, | |
| .read_status = drxk_read_status, | |
| .read_signal_strength = drxk_read_signal_strength, | |
| .read_snr = drxk_read_snr, | |
| .read_ucblocks = drxk_read_ucblocks, | |
| }; | |
| struct dvb_frontend *drxk_attach(const struct drxk_config *config, | |
| struct i2c_adapter *i2c) | |
| { | |
| struct dtv_frontend_properties *p; | |
| struct drxk_state *state = NULL; | |
| u8 adr = config->adr; | |
| int status; | |
| dprintk(1, "\n"); | |
| state = kzalloc(sizeof(struct drxk_state), GFP_KERNEL); | |
| if (!state) | |
| return NULL; | |
| state->i2c = i2c; | |
| state->demod_address = adr; | |
| state->single_master = config->single_master; | |
| state->microcode_name = config->microcode_name; | |
| state->qam_demod_parameter_count = config->qam_demod_parameter_count; | |
| state->no_i2c_bridge = config->no_i2c_bridge; | |
| state->antenna_gpio = config->antenna_gpio; | |
| state->antenna_dvbt = config->antenna_dvbt; | |
| state->m_chunk_size = config->chunk_size; | |
| state->enable_merr_cfg = config->enable_merr_cfg; | |
| if (config->dynamic_clk) { | |
| state->m_dvbt_static_clk = false; | |
| state->m_dvbc_static_clk = false; | |
| } else { | |
| state->m_dvbt_static_clk = true; | |
| state->m_dvbc_static_clk = true; | |
| } | |
| if (config->mpeg_out_clk_strength) | |
| state->m_ts_clockk_strength = config->mpeg_out_clk_strength & 0x07; | |
| else | |
| state->m_ts_clockk_strength = 0x06; | |
| if (config->parallel_ts) | |
| state->m_enable_parallel = true; | |
| else | |
| state->m_enable_parallel = false; | |
| /* NOTE: as more UIO bits will be used, add them to the mask */ | |
| state->uio_mask = config->antenna_gpio; | |
| /* Default gpio to DVB-C */ | |
| if (!state->antenna_dvbt && state->antenna_gpio) | |
| state->m_gpio |= state->antenna_gpio; | |
| else | |
| state->m_gpio &= ~state->antenna_gpio; | |
| mutex_init(&state->mutex); | |
| memcpy(&state->frontend.ops, &drxk_ops, sizeof(drxk_ops)); | |
| state->frontend.demodulator_priv = state; | |
| init_state(state); | |
| /* Load firmware and initialize DRX-K */ | |
| if (state->microcode_name) { | |
| const struct firmware *fw = NULL; | |
| status = request_firmware(&fw, state->microcode_name, | |
| state->i2c->dev.parent); | |
| if (status < 0) | |
| fw = NULL; | |
| load_firmware_cb(fw, state); | |
| } else if (init_drxk(state) < 0) | |
| goto error; | |
| /* Initialize stats */ | |
| p = &state->frontend.dtv_property_cache; | |
| p->strength.len = 1; | |
| p->cnr.len = 1; | |
| p->block_error.len = 1; | |
| p->block_count.len = 1; | |
| p->pre_bit_error.len = 1; | |
| p->pre_bit_count.len = 1; | |
| p->post_bit_error.len = 1; | |
| p->post_bit_count.len = 1; | |
| p->strength.stat[0].scale = FE_SCALE_RELATIVE; | |
| p->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| p->block_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| p->block_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| p->pre_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| p->pre_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| p->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| p->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE; | |
| pr_info("frontend initialized.\n"); | |
| return &state->frontend; | |
| error: | |
| pr_err("not found\n"); | |
| kfree(state); | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL(drxk_attach); | |
| MODULE_DESCRIPTION("DRX-K driver"); | |
| MODULE_AUTHOR("Ralph Metzler"); | |
| MODULE_LICENSE("GPL"); |