| menuconfig MACINTOSH_DRIVERS | |
| bool "Macintosh device drivers" | |
| depends on PPC || MAC || X86 | |
| default y if (PPC_PMAC || MAC) | |
| ---help--- | |
| Say Y here to get to see options for devices used with Macintosh | |
| computers. This option alone does not add any kernel code. | |
| If you say N, all options in this submenu will be skipped and disabled. | |
| if MACINTOSH_DRIVERS | |
| config ADB | |
| bool "Apple Desktop Bus (ADB) support" | |
| depends on MAC || (PPC_PMAC && PPC32) | |
| help | |
| Apple Desktop Bus (ADB) support is for support of devices which | |
| are connected to an ADB port. ADB devices tend to have 4 pins. | |
| If you have an Apple Macintosh prior to the iMac, an iBook or | |
| PowerBook, or a "Blue and White G3", you probably want to say Y | |
| here. Otherwise say N. | |
| config ADB_MACII | |
| bool "Include Mac II ADB driver" | |
| depends on ADB && MAC | |
| help | |
| Say Y here if want your kernel to support Macintosh systems that use | |
| the Mac II style ADB. This includes the II, IIx, IIcx, SE/30, IIci, | |
| Quadra 610, Quadra 650, Quadra 700, Quadra 800, Centris 610 and | |
| Centris 650. | |
| config ADB_IOP | |
| bool "Include IOP (IIfx/Quadra 9x0) ADB driver" | |
| depends on ADB && MAC | |
| help | |
| The I/O Processor (IOP) is an Apple custom IC designed to provide | |
| intelligent support for I/O controllers. It is described at | |
| <http://www.angelfire.com/ca2/dev68k/iopdesc.html> to enable direct | |
| support for it, say 'Y' here. | |
| config ADB_PMU68K | |
| bool "Include PMU (Powerbook) ADB driver" | |
| depends on ADB && MAC | |
| help | |
| Say Y here if want your kernel to support the m68k based Powerbooks. | |
| This includes the PowerBook 140, PowerBook 145, PowerBook 150, | |
| PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170, | |
| PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520, | |
| PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250, | |
| PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c. | |
| # we want to change this to something like CONFIG_SYSCTRL_CUDA/PMU | |
| config ADB_CUDA | |
| bool "Support for Cuda/Egret based Macs and PowerMacs" | |
| depends on (ADB || PPC_PMAC) && !PPC_PMAC64 | |
| help | |
| This provides support for Cuda/Egret based Macintosh and | |
| Power Macintosh systems. This includes most m68k based Macs, | |
| most Old World PowerMacs, the first generation iMacs, the | |
| Blue & White G3 and the "Yikes" G4 (PCI Graphics). All later | |
| models should use CONFIG_ADB_PMU instead. It is safe to say Y | |
| here even if your machine doesn't have a Cuda or Egret device. | |
| If unsure say Y. | |
| config ADB_PMU | |
| bool "Support for PMU based PowerMacs" | |
| depends on PPC_PMAC | |
| help | |
| On PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the | |
| PMU is an embedded microprocessor whose primary function is to | |
| control system power, and battery charging on the portable models. | |
| The PMU also controls the ADB (Apple Desktop Bus) which connects to | |
| the keyboard and mouse on some machines, as well as the non-volatile | |
| RAM and the RTC (real time clock) chip. Say Y to enable support for | |
| this device; you should do so if your machine is one of those | |
| mentioned above. | |
| config ADB_PMU_LED | |
| bool "Support for the Power/iBook front LED" | |
| depends on ADB_PMU | |
| select NEW_LEDS | |
| select LEDS_CLASS | |
| help | |
| Support the front LED on Power/iBooks as a generic LED that can | |
| be triggered by any of the supported triggers. To get the | |
| behaviour of the old CONFIG_BLK_DEV_IDE_PMAC_BLINK, select this | |
| and the disk LED trigger and configure appropriately through sysfs. | |
| config ADB_PMU_LED_DISK | |
| bool "Use front LED as DISK LED by default" | |
| depends on ADB_PMU_LED | |
| depends on LEDS_CLASS | |
| select LEDS_TRIGGERS | |
| select LEDS_TRIGGER_DISK | |
| help | |
| This option makes the front LED default to the disk trigger | |
| so that it blinks on disk activity. | |
| config PMAC_SMU | |
| bool "Support for SMU based PowerMacs" | |
| depends on PPC_PMAC64 | |
| help | |
| This option adds support for the newer G5 iMacs and PowerMacs based | |
| on the "SMU" system control chip which replaces the old PMU. | |
| If you don't know, say Y. | |
| config PMAC_APM_EMU | |
| tristate "APM emulation" | |
| select APM_EMULATION | |
| depends on ADB_PMU && PM && PPC32 | |
| config PMAC_MEDIABAY | |
| bool "Support PowerBook hotswap media bay" | |
| depends on PPC_PMAC && PPC32 && BLOCK | |
| help | |
| This option adds support for older PowerBook's hotswap media bay | |
| that can contains batteries, floppy drives, or IDE devices. PCI | |
| devices are not fully supported in the bay as I never had one to | |
| try with | |
| config PMAC_BACKLIGHT | |
| bool "Backlight control for LCD screens" | |
| depends on ADB_PMU && FB = y && (BROKEN || !PPC64) | |
| select FB_BACKLIGHT | |
| help | |
| Say Y here to enable Macintosh specific extensions of the generic | |
| backlight code. With this enabled, the brightness keys on older | |
| PowerBooks will be enabled so you can change the screen brightness. | |
| Newer models should use a userspace daemon like pbbuttonsd. | |
| config PMAC_BACKLIGHT_LEGACY | |
| bool "Provide legacy ioctl's on /dev/pmu for the backlight" | |
| depends on PMAC_BACKLIGHT && (BROKEN || !PPC64) | |
| help | |
| Say Y if you want to enable legacy ioctl's on /dev/pmu. This is for | |
| programs which use this old interface. New and updated programs | |
| should use the backlight classes in sysfs. | |
| config ADB_MACIO | |
| bool "Include MacIO (CHRP) ADB driver" | |
| depends on ADB && PPC_CHRP && !PPC_PMAC64 | |
| help | |
| Say Y here to include direct support for the ADB controller in the | |
| Hydra chip used on PowerPC Macintoshes of the CHRP type. (The Hydra | |
| also includes a MESH II SCSI controller, DBDMA controller, VIA chip, | |
| OpenPIC controller and two RS422/Geoports.) | |
| config INPUT_ADBHID | |
| bool "Support for ADB input devices (keyboard, mice, ...)" | |
| depends on ADB && INPUT=y | |
| help | |
| Say Y here if you want to have ADB (Apple Desktop Bus) HID devices | |
| such as keyboards, mice, joysticks, trackpads or graphic tablets | |
| handled by the input layer. If you say Y here, make sure to say Y to | |
| the corresponding drivers "Mouse Support" (CONFIG_INPUT_MOUSEDEV) and | |
| "Event interface support" (CONFIG_INPUT_EVDEV) as well. | |
| If unsure, say Y. | |
| config MAC_EMUMOUSEBTN | |
| tristate "Support for mouse button 2+3 emulation" | |
| depends on SYSCTL && INPUT | |
| help | |
| This provides generic support for emulating the 2nd and 3rd mouse | |
| button with keypresses. If you say Y here, the emulation is still | |
| disabled by default. The emulation is controlled by these sysctl | |
| entries: | |
| /proc/sys/dev/mac_hid/mouse_button_emulation | |
| /proc/sys/dev/mac_hid/mouse_button2_keycode | |
| /proc/sys/dev/mac_hid/mouse_button3_keycode | |
| If you have an Apple machine with a 1-button mouse, say Y here. | |
| To compile this driver as a module, choose M here: the | |
| module will be called mac_hid. | |
| config THERM_WINDTUNNEL | |
| tristate "Support for thermal management on Windtunnel G4s" | |
| depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 | |
| help | |
| This driver provides some thermostat and fan control for the desktop | |
| G4 "Windtunnel" | |
| config THERM_ADT746X | |
| tristate "Support for thermal mgmnt on laptops with ADT 746x chipset" | |
| depends on I2C && I2C_POWERMAC && PPC_PMAC && !PPC_PMAC64 | |
| help | |
| This driver provides some thermostat and fan control for the | |
| iBook G4, and the ATI based aluminium PowerBooks, allowing slightly | |
| better fan behaviour by default, and some manual control. | |
| config WINDFARM | |
| tristate "New PowerMac thermal control infrastructure" | |
| depends on PPC | |
| config WINDFARM_PM81 | |
| tristate "Support for thermal management on iMac G5" | |
| depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU | |
| select I2C_POWERMAC | |
| help | |
| This driver provides thermal control for the iMacG5 | |
| config WINDFARM_PM72 | |
| tristate "Support for thermal management on PowerMac G5 (AGP)" | |
| depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU | |
| select I2C_POWERMAC | |
| help | |
| This driver provides thermal control for the PowerMac G5 | |
| "AGP" variants (PowerMac 7,2 and 7,3) | |
| config WINDFARM_RM31 | |
| tristate "Support for thermal management on Xserve G5" | |
| depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && ADB_PMU | |
| select I2C_POWERMAC | |
| help | |
| This driver provides thermal control for the Xserve G5 | |
| (RackMac3,1) | |
| config WINDFARM_PM91 | |
| tristate "Support for thermal management on PowerMac9,1" | |
| depends on WINDFARM && I2C && CPU_FREQ_PMAC64 && PMAC_SMU | |
| select I2C_POWERMAC | |
| help | |
| This driver provides thermal control for the PowerMac9,1 | |
| which is the recent (SMU based) single CPU desktop G5 | |
| config WINDFARM_PM112 | |
| tristate "Support for thermal management on PowerMac11,2" | |
| depends on WINDFARM && I2C && PMAC_SMU | |
| select I2C_POWERMAC | |
| help | |
| This driver provides thermal control for the PowerMac11,2 | |
| which are the recent dual and quad G5 machines using the | |
| 970MP dual-core processor. | |
| config WINDFARM_PM121 | |
| tristate "Support for thermal management on PowerMac12,1" | |
| depends on WINDFARM && I2C && PMAC_SMU | |
| select I2C_POWERMAC | |
| help | |
| This driver provides thermal control for the PowerMac12,1 | |
| which is the iMac G5 (iSight). | |
| config ANSLCD | |
| tristate "Support for ANS LCD display" | |
| depends on ADB_CUDA && PPC_PMAC | |
| config PMAC_RACKMETER | |
| tristate "Support for Apple XServe front panel LEDs" | |
| depends on PPC_PMAC | |
| help | |
| This driver provides some support to control the front panel | |
| blue LEDs "vu-meter" of the XServer macs. | |
| config SENSORS_AMS | |
| tristate "Apple Motion Sensor driver" | |
| depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) | |
| select INPUT_POLLDEV | |
| help | |
| Support for the motion sensor included in PowerBooks. Includes | |
| implementations for PMU and I2C. | |
| This driver can also be built as a module. If so, the module | |
| will be called ams. | |
| config SENSORS_AMS_PMU | |
| bool "PMU variant" | |
| depends on SENSORS_AMS && ADB_PMU | |
| default y | |
| help | |
| PMU variant of motion sensor, found in late 2005 PowerBooks. | |
| config SENSORS_AMS_I2C | |
| bool "I2C variant" | |
| depends on SENSORS_AMS && I2C | |
| default y | |
| help | |
| I2C variant of motion sensor, found in early 2005 PowerBooks and | |
| iBooks. | |
| endif # MACINTOSH_DRIVERS |