| /* | |
| * ati_remote2 - ATI/Philips USB RF remote driver | |
| * | |
| * Copyright (C) 2005-2008 Ville Syrjala <syrjala@sci.fi> | |
| * Copyright (C) 2007-2008 Peter Stokes <linux@dadeos.co.uk> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 | |
| * as published by the Free Software Foundation. | |
| */ | |
| #include <linux/usb/input.h> | |
| #include <linux/slab.h> | |
| #include <linux/module.h> | |
| #define DRIVER_DESC "ATI/Philips USB RF remote driver" | |
| MODULE_DESCRIPTION(DRIVER_DESC); | |
| MODULE_AUTHOR("Ville Syrjala <syrjala@sci.fi>"); | |
| MODULE_LICENSE("GPL"); | |
| /* | |
| * ATI Remote Wonder II Channel Configuration | |
| * | |
| * The remote control can be assigned one of sixteen "channels" in order to facilitate | |
| * the use of multiple remote controls within range of each other. | |
| * A remote's "channel" may be altered by pressing and holding the "PC" button for | |
| * approximately 3 seconds, after which the button will slowly flash the count of the | |
| * currently configured "channel", using the numeric keypad enter a number between 1 and | |
| * 16 and then press the "PC" button again, the button will slowly flash the count of the | |
| * newly configured "channel". | |
| */ | |
| enum { | |
| ATI_REMOTE2_MAX_CHANNEL_MASK = 0xFFFF, | |
| ATI_REMOTE2_MAX_MODE_MASK = 0x1F, | |
| }; | |
| static int ati_remote2_set_mask(const char *val, | |
| const struct kernel_param *kp, | |
| unsigned int max) | |
| { | |
| unsigned int mask; | |
| int ret; | |
| if (!val) | |
| return -EINVAL; | |
| ret = kstrtouint(val, 0, &mask); | |
| if (ret) | |
| return ret; | |
| if (mask & ~max) | |
| return -EINVAL; | |
| *(unsigned int *)kp->arg = mask; | |
| return 0; | |
| } | |
| static int ati_remote2_set_channel_mask(const char *val, | |
| const struct kernel_param *kp) | |
| { | |
| pr_debug("%s()\n", __func__); | |
| return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_CHANNEL_MASK); | |
| } | |
| static int ati_remote2_get_channel_mask(char *buffer, | |
| const struct kernel_param *kp) | |
| { | |
| pr_debug("%s()\n", __func__); | |
| return sprintf(buffer, "0x%04x", *(unsigned int *)kp->arg); | |
| } | |
| static int ati_remote2_set_mode_mask(const char *val, | |
| const struct kernel_param *kp) | |
| { | |
| pr_debug("%s()\n", __func__); | |
| return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_MODE_MASK); | |
| } | |
| static int ati_remote2_get_mode_mask(char *buffer, | |
| const struct kernel_param *kp) | |
| { | |
| pr_debug("%s()\n", __func__); | |
| return sprintf(buffer, "0x%02x", *(unsigned int *)kp->arg); | |
| } | |
| static unsigned int channel_mask = ATI_REMOTE2_MAX_CHANNEL_MASK; | |
| #define param_check_channel_mask(name, p) __param_check(name, p, unsigned int) | |
| static const struct kernel_param_ops param_ops_channel_mask = { | |
| .set = ati_remote2_set_channel_mask, | |
| .get = ati_remote2_get_channel_mask, | |
| }; | |
| module_param(channel_mask, channel_mask, 0644); | |
| MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>"); | |
| static unsigned int mode_mask = ATI_REMOTE2_MAX_MODE_MASK; | |
| #define param_check_mode_mask(name, p) __param_check(name, p, unsigned int) | |
| static const struct kernel_param_ops param_ops_mode_mask = { | |
| .set = ati_remote2_set_mode_mask, | |
| .get = ati_remote2_get_mode_mask, | |
| }; | |
| module_param(mode_mask, mode_mask, 0644); | |
| MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>"); | |
| static const struct usb_device_id ati_remote2_id_table[] = { | |
| { USB_DEVICE(0x0471, 0x0602) }, /* ATI Remote Wonder II */ | |
| { } | |
| }; | |
| MODULE_DEVICE_TABLE(usb, ati_remote2_id_table); | |
| static DEFINE_MUTEX(ati_remote2_mutex); | |
| enum { | |
| ATI_REMOTE2_OPENED = 0x1, | |
| ATI_REMOTE2_SUSPENDED = 0x2, | |
| }; | |
| enum { | |
| ATI_REMOTE2_AUX1, | |
| ATI_REMOTE2_AUX2, | |
| ATI_REMOTE2_AUX3, | |
| ATI_REMOTE2_AUX4, | |
| ATI_REMOTE2_PC, | |
| ATI_REMOTE2_MODES, | |
| }; | |
| static const struct { | |
| u8 hw_code; | |
| u16 keycode; | |
| } ati_remote2_key_table[] = { | |
| { 0x00, KEY_0 }, | |
| { 0x01, KEY_1 }, | |
| { 0x02, KEY_2 }, | |
| { 0x03, KEY_3 }, | |
| { 0x04, KEY_4 }, | |
| { 0x05, KEY_5 }, | |
| { 0x06, KEY_6 }, | |
| { 0x07, KEY_7 }, | |
| { 0x08, KEY_8 }, | |
| { 0x09, KEY_9 }, | |
| { 0x0c, KEY_POWER }, | |
| { 0x0d, KEY_MUTE }, | |
| { 0x10, KEY_VOLUMEUP }, | |
| { 0x11, KEY_VOLUMEDOWN }, | |
| { 0x20, KEY_CHANNELUP }, | |
| { 0x21, KEY_CHANNELDOWN }, | |
| { 0x28, KEY_FORWARD }, | |
| { 0x29, KEY_REWIND }, | |
| { 0x2c, KEY_PLAY }, | |
| { 0x30, KEY_PAUSE }, | |
| { 0x31, KEY_STOP }, | |
| { 0x37, KEY_RECORD }, | |
| { 0x38, KEY_DVD }, | |
| { 0x39, KEY_TV }, | |
| { 0x3f, KEY_PROG1 }, /* AUX1-AUX4 and PC */ | |
| { 0x54, KEY_MENU }, | |
| { 0x58, KEY_UP }, | |
| { 0x59, KEY_DOWN }, | |
| { 0x5a, KEY_LEFT }, | |
| { 0x5b, KEY_RIGHT }, | |
| { 0x5c, KEY_OK }, | |
| { 0x78, KEY_A }, | |
| { 0x79, KEY_B }, | |
| { 0x7a, KEY_C }, | |
| { 0x7b, KEY_D }, | |
| { 0x7c, KEY_E }, | |
| { 0x7d, KEY_F }, | |
| { 0x82, KEY_ENTER }, | |
| { 0x8e, KEY_VENDOR }, | |
| { 0x96, KEY_COFFEE }, | |
| { 0xa9, BTN_LEFT }, | |
| { 0xaa, BTN_RIGHT }, | |
| { 0xbe, KEY_QUESTION }, | |
| { 0xd0, KEY_EDIT }, | |
| { 0xd5, KEY_FRONT }, | |
| { 0xf9, KEY_INFO }, | |
| }; | |
| struct ati_remote2 { | |
| struct input_dev *idev; | |
| struct usb_device *udev; | |
| struct usb_interface *intf[2]; | |
| struct usb_endpoint_descriptor *ep[2]; | |
| struct urb *urb[2]; | |
| void *buf[2]; | |
| dma_addr_t buf_dma[2]; | |
| unsigned long jiffies; | |
| int mode; | |
| char name[64]; | |
| char phys[64]; | |
| /* Each mode (AUX1-AUX4 and PC) can have an independent keymap. */ | |
| u16 keycode[ATI_REMOTE2_MODES][ARRAY_SIZE(ati_remote2_key_table)]; | |
| unsigned int flags; | |
| unsigned int channel_mask; | |
| unsigned int mode_mask; | |
| }; | |
| static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id); | |
| static void ati_remote2_disconnect(struct usb_interface *interface); | |
| static int ati_remote2_suspend(struct usb_interface *interface, pm_message_t message); | |
| static int ati_remote2_resume(struct usb_interface *interface); | |
| static int ati_remote2_reset_resume(struct usb_interface *interface); | |
| static int ati_remote2_pre_reset(struct usb_interface *interface); | |
| static int ati_remote2_post_reset(struct usb_interface *interface); | |
| static struct usb_driver ati_remote2_driver = { | |
| .name = "ati_remote2", | |
| .probe = ati_remote2_probe, | |
| .disconnect = ati_remote2_disconnect, | |
| .id_table = ati_remote2_id_table, | |
| .suspend = ati_remote2_suspend, | |
| .resume = ati_remote2_resume, | |
| .reset_resume = ati_remote2_reset_resume, | |
| .pre_reset = ati_remote2_pre_reset, | |
| .post_reset = ati_remote2_post_reset, | |
| .supports_autosuspend = 1, | |
| }; | |
| static int ati_remote2_submit_urbs(struct ati_remote2 *ar2) | |
| { | |
| int r; | |
| r = usb_submit_urb(ar2->urb[0], GFP_KERNEL); | |
| if (r) { | |
| dev_err(&ar2->intf[0]->dev, | |
| "%s(): usb_submit_urb() = %d\n", __func__, r); | |
| return r; | |
| } | |
| r = usb_submit_urb(ar2->urb[1], GFP_KERNEL); | |
| if (r) { | |
| usb_kill_urb(ar2->urb[0]); | |
| dev_err(&ar2->intf[1]->dev, | |
| "%s(): usb_submit_urb() = %d\n", __func__, r); | |
| return r; | |
| } | |
| return 0; | |
| } | |
| static void ati_remote2_kill_urbs(struct ati_remote2 *ar2) | |
| { | |
| usb_kill_urb(ar2->urb[1]); | |
| usb_kill_urb(ar2->urb[0]); | |
| } | |
| static int ati_remote2_open(struct input_dev *idev) | |
| { | |
| struct ati_remote2 *ar2 = input_get_drvdata(idev); | |
| int r; | |
| dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__); | |
| r = usb_autopm_get_interface(ar2->intf[0]); | |
| if (r) { | |
| dev_err(&ar2->intf[0]->dev, | |
| "%s(): usb_autopm_get_interface() = %d\n", __func__, r); | |
| goto fail1; | |
| } | |
| mutex_lock(&ati_remote2_mutex); | |
| if (!(ar2->flags & ATI_REMOTE2_SUSPENDED)) { | |
| r = ati_remote2_submit_urbs(ar2); | |
| if (r) | |
| goto fail2; | |
| } | |
| ar2->flags |= ATI_REMOTE2_OPENED; | |
| mutex_unlock(&ati_remote2_mutex); | |
| usb_autopm_put_interface(ar2->intf[0]); | |
| return 0; | |
| fail2: | |
| mutex_unlock(&ati_remote2_mutex); | |
| usb_autopm_put_interface(ar2->intf[0]); | |
| fail1: | |
| return r; | |
| } | |
| static void ati_remote2_close(struct input_dev *idev) | |
| { | |
| struct ati_remote2 *ar2 = input_get_drvdata(idev); | |
| dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__); | |
| mutex_lock(&ati_remote2_mutex); | |
| if (!(ar2->flags & ATI_REMOTE2_SUSPENDED)) | |
| ati_remote2_kill_urbs(ar2); | |
| ar2->flags &= ~ATI_REMOTE2_OPENED; | |
| mutex_unlock(&ati_remote2_mutex); | |
| } | |
| static void ati_remote2_input_mouse(struct ati_remote2 *ar2) | |
| { | |
| struct input_dev *idev = ar2->idev; | |
| u8 *data = ar2->buf[0]; | |
| int channel, mode; | |
| channel = data[0] >> 4; | |
| if (!((1 << channel) & ar2->channel_mask)) | |
| return; | |
| mode = data[0] & 0x0F; | |
| if (mode > ATI_REMOTE2_PC) { | |
| dev_err(&ar2->intf[0]->dev, | |
| "Unknown mode byte (%02x %02x %02x %02x)\n", | |
| data[3], data[2], data[1], data[0]); | |
| return; | |
| } | |
| if (!((1 << mode) & ar2->mode_mask)) | |
| return; | |
| input_event(idev, EV_REL, REL_X, (s8) data[1]); | |
| input_event(idev, EV_REL, REL_Y, (s8) data[2]); | |
| input_sync(idev); | |
| } | |
| static int ati_remote2_lookup(unsigned int hw_code) | |
| { | |
| int i; | |
| for (i = 0; i < ARRAY_SIZE(ati_remote2_key_table); i++) | |
| if (ati_remote2_key_table[i].hw_code == hw_code) | |
| return i; | |
| return -1; | |
| } | |
| static void ati_remote2_input_key(struct ati_remote2 *ar2) | |
| { | |
| struct input_dev *idev = ar2->idev; | |
| u8 *data = ar2->buf[1]; | |
| int channel, mode, hw_code, index; | |
| channel = data[0] >> 4; | |
| if (!((1 << channel) & ar2->channel_mask)) | |
| return; | |
| mode = data[0] & 0x0F; | |
| if (mode > ATI_REMOTE2_PC) { | |
| dev_err(&ar2->intf[1]->dev, | |
| "Unknown mode byte (%02x %02x %02x %02x)\n", | |
| data[3], data[2], data[1], data[0]); | |
| return; | |
| } | |
| hw_code = data[2]; | |
| if (hw_code == 0x3f) { | |
| /* | |
| * For some incomprehensible reason the mouse pad generates | |
| * events which look identical to the events from the last | |
| * pressed mode key. Naturally we don't want to generate key | |
| * events for the mouse pad so we filter out any subsequent | |
| * events from the same mode key. | |
| */ | |
| if (ar2->mode == mode) | |
| return; | |
| if (data[1] == 0) | |
| ar2->mode = mode; | |
| } | |
| if (!((1 << mode) & ar2->mode_mask)) | |
| return; | |
| index = ati_remote2_lookup(hw_code); | |
| if (index < 0) { | |
| dev_err(&ar2->intf[1]->dev, | |
| "Unknown code byte (%02x %02x %02x %02x)\n", | |
| data[3], data[2], data[1], data[0]); | |
| return; | |
| } | |
| switch (data[1]) { | |
| case 0: /* release */ | |
| break; | |
| case 1: /* press */ | |
| ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_DELAY]); | |
| break; | |
| case 2: /* repeat */ | |
| /* No repeat for mouse buttons. */ | |
| if (ar2->keycode[mode][index] == BTN_LEFT || | |
| ar2->keycode[mode][index] == BTN_RIGHT) | |
| return; | |
| if (!time_after_eq(jiffies, ar2->jiffies)) | |
| return; | |
| ar2->jiffies = jiffies + msecs_to_jiffies(idev->rep[REP_PERIOD]); | |
| break; | |
| default: | |
| dev_err(&ar2->intf[1]->dev, | |
| "Unknown state byte (%02x %02x %02x %02x)\n", | |
| data[3], data[2], data[1], data[0]); | |
| return; | |
| } | |
| input_event(idev, EV_KEY, ar2->keycode[mode][index], data[1]); | |
| input_sync(idev); | |
| } | |
| static void ati_remote2_complete_mouse(struct urb *urb) | |
| { | |
| struct ati_remote2 *ar2 = urb->context; | |
| int r; | |
| switch (urb->status) { | |
| case 0: | |
| usb_mark_last_busy(ar2->udev); | |
| ati_remote2_input_mouse(ar2); | |
| break; | |
| case -ENOENT: | |
| case -EILSEQ: | |
| case -ECONNRESET: | |
| case -ESHUTDOWN: | |
| dev_dbg(&ar2->intf[0]->dev, | |
| "%s(): urb status = %d\n", __func__, urb->status); | |
| return; | |
| default: | |
| usb_mark_last_busy(ar2->udev); | |
| dev_err(&ar2->intf[0]->dev, | |
| "%s(): urb status = %d\n", __func__, urb->status); | |
| } | |
| r = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (r) | |
| dev_err(&ar2->intf[0]->dev, | |
| "%s(): usb_submit_urb() = %d\n", __func__, r); | |
| } | |
| static void ati_remote2_complete_key(struct urb *urb) | |
| { | |
| struct ati_remote2 *ar2 = urb->context; | |
| int r; | |
| switch (urb->status) { | |
| case 0: | |
| usb_mark_last_busy(ar2->udev); | |
| ati_remote2_input_key(ar2); | |
| break; | |
| case -ENOENT: | |
| case -EILSEQ: | |
| case -ECONNRESET: | |
| case -ESHUTDOWN: | |
| dev_dbg(&ar2->intf[1]->dev, | |
| "%s(): urb status = %d\n", __func__, urb->status); | |
| return; | |
| default: | |
| usb_mark_last_busy(ar2->udev); | |
| dev_err(&ar2->intf[1]->dev, | |
| "%s(): urb status = %d\n", __func__, urb->status); | |
| } | |
| r = usb_submit_urb(urb, GFP_ATOMIC); | |
| if (r) | |
| dev_err(&ar2->intf[1]->dev, | |
| "%s(): usb_submit_urb() = %d\n", __func__, r); | |
| } | |
| static int ati_remote2_getkeycode(struct input_dev *idev, | |
| struct input_keymap_entry *ke) | |
| { | |
| struct ati_remote2 *ar2 = input_get_drvdata(idev); | |
| unsigned int mode; | |
| int offset; | |
| unsigned int index; | |
| unsigned int scancode; | |
| if (ke->flags & INPUT_KEYMAP_BY_INDEX) { | |
| index = ke->index; | |
| if (index >= ATI_REMOTE2_MODES * | |
| ARRAY_SIZE(ati_remote2_key_table)) | |
| return -EINVAL; | |
| mode = ke->index / ARRAY_SIZE(ati_remote2_key_table); | |
| offset = ke->index % ARRAY_SIZE(ati_remote2_key_table); | |
| scancode = (mode << 8) + ati_remote2_key_table[offset].hw_code; | |
| } else { | |
| if (input_scancode_to_scalar(ke, &scancode)) | |
| return -EINVAL; | |
| mode = scancode >> 8; | |
| if (mode > ATI_REMOTE2_PC) | |
| return -EINVAL; | |
| offset = ati_remote2_lookup(scancode & 0xff); | |
| if (offset < 0) | |
| return -EINVAL; | |
| index = mode * ARRAY_SIZE(ati_remote2_key_table) + offset; | |
| } | |
| ke->keycode = ar2->keycode[mode][offset]; | |
| ke->len = sizeof(scancode); | |
| memcpy(&ke->scancode, &scancode, sizeof(scancode)); | |
| ke->index = index; | |
| return 0; | |
| } | |
| static int ati_remote2_setkeycode(struct input_dev *idev, | |
| const struct input_keymap_entry *ke, | |
| unsigned int *old_keycode) | |
| { | |
| struct ati_remote2 *ar2 = input_get_drvdata(idev); | |
| unsigned int mode; | |
| int offset; | |
| unsigned int index; | |
| unsigned int scancode; | |
| if (ke->flags & INPUT_KEYMAP_BY_INDEX) { | |
| if (ke->index >= ATI_REMOTE2_MODES * | |
| ARRAY_SIZE(ati_remote2_key_table)) | |
| return -EINVAL; | |
| mode = ke->index / ARRAY_SIZE(ati_remote2_key_table); | |
| offset = ke->index % ARRAY_SIZE(ati_remote2_key_table); | |
| } else { | |
| if (input_scancode_to_scalar(ke, &scancode)) | |
| return -EINVAL; | |
| mode = scancode >> 8; | |
| if (mode > ATI_REMOTE2_PC) | |
| return -EINVAL; | |
| offset = ati_remote2_lookup(scancode & 0xff); | |
| if (offset < 0) | |
| return -EINVAL; | |
| } | |
| *old_keycode = ar2->keycode[mode][offset]; | |
| ar2->keycode[mode][offset] = ke->keycode; | |
| __set_bit(ke->keycode, idev->keybit); | |
| for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) { | |
| for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) { | |
| if (ar2->keycode[mode][index] == *old_keycode) | |
| return 0; | |
| } | |
| } | |
| __clear_bit(*old_keycode, idev->keybit); | |
| return 0; | |
| } | |
| static int ati_remote2_input_init(struct ati_remote2 *ar2) | |
| { | |
| struct input_dev *idev; | |
| int index, mode, retval; | |
| idev = input_allocate_device(); | |
| if (!idev) | |
| return -ENOMEM; | |
| ar2->idev = idev; | |
| input_set_drvdata(idev, ar2); | |
| idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | BIT_MASK(EV_REL); | |
| idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) | | |
| BIT_MASK(BTN_RIGHT); | |
| idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); | |
| for (mode = 0; mode < ATI_REMOTE2_MODES; mode++) { | |
| for (index = 0; index < ARRAY_SIZE(ati_remote2_key_table); index++) { | |
| ar2->keycode[mode][index] = ati_remote2_key_table[index].keycode; | |
| __set_bit(ar2->keycode[mode][index], idev->keybit); | |
| } | |
| } | |
| /* AUX1-AUX4 and PC generate the same scancode. */ | |
| index = ati_remote2_lookup(0x3f); | |
| ar2->keycode[ATI_REMOTE2_AUX1][index] = KEY_PROG1; | |
| ar2->keycode[ATI_REMOTE2_AUX2][index] = KEY_PROG2; | |
| ar2->keycode[ATI_REMOTE2_AUX3][index] = KEY_PROG3; | |
| ar2->keycode[ATI_REMOTE2_AUX4][index] = KEY_PROG4; | |
| ar2->keycode[ATI_REMOTE2_PC][index] = KEY_PC; | |
| __set_bit(KEY_PROG1, idev->keybit); | |
| __set_bit(KEY_PROG2, idev->keybit); | |
| __set_bit(KEY_PROG3, idev->keybit); | |
| __set_bit(KEY_PROG4, idev->keybit); | |
| __set_bit(KEY_PC, idev->keybit); | |
| idev->rep[REP_DELAY] = 250; | |
| idev->rep[REP_PERIOD] = 33; | |
| idev->open = ati_remote2_open; | |
| idev->close = ati_remote2_close; | |
| idev->getkeycode = ati_remote2_getkeycode; | |
| idev->setkeycode = ati_remote2_setkeycode; | |
| idev->name = ar2->name; | |
| idev->phys = ar2->phys; | |
| usb_to_input_id(ar2->udev, &idev->id); | |
| idev->dev.parent = &ar2->udev->dev; | |
| retval = input_register_device(idev); | |
| if (retval) | |
| input_free_device(idev); | |
| return retval; | |
| } | |
| static int ati_remote2_urb_init(struct ati_remote2 *ar2) | |
| { | |
| struct usb_device *udev = ar2->udev; | |
| int i, pipe, maxp; | |
| for (i = 0; i < 2; i++) { | |
| ar2->buf[i] = usb_alloc_coherent(udev, 4, GFP_KERNEL, &ar2->buf_dma[i]); | |
| if (!ar2->buf[i]) | |
| return -ENOMEM; | |
| ar2->urb[i] = usb_alloc_urb(0, GFP_KERNEL); | |
| if (!ar2->urb[i]) | |
| return -ENOMEM; | |
| pipe = usb_rcvintpipe(udev, ar2->ep[i]->bEndpointAddress); | |
| maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); | |
| maxp = maxp > 4 ? 4 : maxp; | |
| usb_fill_int_urb(ar2->urb[i], udev, pipe, ar2->buf[i], maxp, | |
| i ? ati_remote2_complete_key : ati_remote2_complete_mouse, | |
| ar2, ar2->ep[i]->bInterval); | |
| ar2->urb[i]->transfer_dma = ar2->buf_dma[i]; | |
| ar2->urb[i]->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; | |
| } | |
| return 0; | |
| } | |
| static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2) | |
| { | |
| int i; | |
| for (i = 0; i < 2; i++) { | |
| usb_free_urb(ar2->urb[i]); | |
| usb_free_coherent(ar2->udev, 4, ar2->buf[i], ar2->buf_dma[i]); | |
| } | |
| } | |
| static int ati_remote2_setup(struct ati_remote2 *ar2, unsigned int ch_mask) | |
| { | |
| int r, i, channel; | |
| /* | |
| * Configure receiver to only accept input from remote "channel" | |
| * channel == 0 -> Accept input from any remote channel | |
| * channel == 1 -> Only accept input from remote channel 1 | |
| * channel == 2 -> Only accept input from remote channel 2 | |
| * ... | |
| * channel == 16 -> Only accept input from remote channel 16 | |
| */ | |
| channel = 0; | |
| for (i = 0; i < 16; i++) { | |
| if ((1 << i) & ch_mask) { | |
| if (!(~(1 << i) & ch_mask)) | |
| channel = i + 1; | |
| break; | |
| } | |
| } | |
| r = usb_control_msg(ar2->udev, usb_sndctrlpipe(ar2->udev, 0), | |
| 0x20, | |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE, | |
| channel, 0x0, NULL, 0, USB_CTRL_SET_TIMEOUT); | |
| if (r) { | |
| dev_err(&ar2->udev->dev, "%s - failed to set channel due to error: %d\n", | |
| __func__, r); | |
| return r; | |
| } | |
| return 0; | |
| } | |
| static ssize_t ati_remote2_show_channel_mask(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct usb_device *udev = to_usb_device(dev); | |
| struct usb_interface *intf = usb_ifnum_to_if(udev, 0); | |
| struct ati_remote2 *ar2 = usb_get_intfdata(intf); | |
| return sprintf(buf, "0x%04x\n", ar2->channel_mask); | |
| } | |
| static ssize_t ati_remote2_store_channel_mask(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct usb_device *udev = to_usb_device(dev); | |
| struct usb_interface *intf = usb_ifnum_to_if(udev, 0); | |
| struct ati_remote2 *ar2 = usb_get_intfdata(intf); | |
| unsigned int mask; | |
| int r; | |
| r = kstrtouint(buf, 0, &mask); | |
| if (r) | |
| return r; | |
| if (mask & ~ATI_REMOTE2_MAX_CHANNEL_MASK) | |
| return -EINVAL; | |
| r = usb_autopm_get_interface(ar2->intf[0]); | |
| if (r) { | |
| dev_err(&ar2->intf[0]->dev, | |
| "%s(): usb_autopm_get_interface() = %d\n", __func__, r); | |
| return r; | |
| } | |
| mutex_lock(&ati_remote2_mutex); | |
| if (mask != ar2->channel_mask) { | |
| r = ati_remote2_setup(ar2, mask); | |
| if (!r) | |
| ar2->channel_mask = mask; | |
| } | |
| mutex_unlock(&ati_remote2_mutex); | |
| usb_autopm_put_interface(ar2->intf[0]); | |
| return r ? r : count; | |
| } | |
| static ssize_t ati_remote2_show_mode_mask(struct device *dev, | |
| struct device_attribute *attr, | |
| char *buf) | |
| { | |
| struct usb_device *udev = to_usb_device(dev); | |
| struct usb_interface *intf = usb_ifnum_to_if(udev, 0); | |
| struct ati_remote2 *ar2 = usb_get_intfdata(intf); | |
| return sprintf(buf, "0x%02x\n", ar2->mode_mask); | |
| } | |
| static ssize_t ati_remote2_store_mode_mask(struct device *dev, | |
| struct device_attribute *attr, | |
| const char *buf, size_t count) | |
| { | |
| struct usb_device *udev = to_usb_device(dev); | |
| struct usb_interface *intf = usb_ifnum_to_if(udev, 0); | |
| struct ati_remote2 *ar2 = usb_get_intfdata(intf); | |
| unsigned int mask; | |
| int err; | |
| err = kstrtouint(buf, 0, &mask); | |
| if (err) | |
| return err; | |
| if (mask & ~ATI_REMOTE2_MAX_MODE_MASK) | |
| return -EINVAL; | |
| ar2->mode_mask = mask; | |
| return count; | |
| } | |
| static DEVICE_ATTR(channel_mask, 0644, ati_remote2_show_channel_mask, | |
| ati_remote2_store_channel_mask); | |
| static DEVICE_ATTR(mode_mask, 0644, ati_remote2_show_mode_mask, | |
| ati_remote2_store_mode_mask); | |
| static struct attribute *ati_remote2_attrs[] = { | |
| &dev_attr_channel_mask.attr, | |
| &dev_attr_mode_mask.attr, | |
| NULL, | |
| }; | |
| static struct attribute_group ati_remote2_attr_group = { | |
| .attrs = ati_remote2_attrs, | |
| }; | |
| static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id) | |
| { | |
| struct usb_device *udev = interface_to_usbdev(interface); | |
| struct usb_host_interface *alt = interface->cur_altsetting; | |
| struct ati_remote2 *ar2; | |
| int r; | |
| if (alt->desc.bInterfaceNumber) | |
| return -ENODEV; | |
| ar2 = kzalloc(sizeof (struct ati_remote2), GFP_KERNEL); | |
| if (!ar2) | |
| return -ENOMEM; | |
| ar2->udev = udev; | |
| /* Sanity check, first interface must have an endpoint */ | |
| if (alt->desc.bNumEndpoints < 1 || !alt->endpoint) { | |
| dev_err(&interface->dev, | |
| "%s(): interface 0 must have an endpoint\n", __func__); | |
| r = -ENODEV; | |
| goto fail1; | |
| } | |
| ar2->intf[0] = interface; | |
| ar2->ep[0] = &alt->endpoint[0].desc; | |
| /* Sanity check, the device must have two interfaces */ | |
| ar2->intf[1] = usb_ifnum_to_if(udev, 1); | |
| if ((udev->actconfig->desc.bNumInterfaces < 2) || !ar2->intf[1]) { | |
| dev_err(&interface->dev, "%s(): need 2 interfaces, found %d\n", | |
| __func__, udev->actconfig->desc.bNumInterfaces); | |
| r = -ENODEV; | |
| goto fail1; | |
| } | |
| r = usb_driver_claim_interface(&ati_remote2_driver, ar2->intf[1], ar2); | |
| if (r) | |
| goto fail1; | |
| /* Sanity check, second interface must have an endpoint */ | |
| alt = ar2->intf[1]->cur_altsetting; | |
| if (alt->desc.bNumEndpoints < 1 || !alt->endpoint) { | |
| dev_err(&interface->dev, | |
| "%s(): interface 1 must have an endpoint\n", __func__); | |
| r = -ENODEV; | |
| goto fail2; | |
| } | |
| ar2->ep[1] = &alt->endpoint[0].desc; | |
| r = ati_remote2_urb_init(ar2); | |
| if (r) | |
| goto fail3; | |
| ar2->channel_mask = channel_mask; | |
| ar2->mode_mask = mode_mask; | |
| r = ati_remote2_setup(ar2, ar2->channel_mask); | |
| if (r) | |
| goto fail3; | |
| usb_make_path(udev, ar2->phys, sizeof(ar2->phys)); | |
| strlcat(ar2->phys, "/input0", sizeof(ar2->phys)); | |
| strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name)); | |
| r = sysfs_create_group(&udev->dev.kobj, &ati_remote2_attr_group); | |
| if (r) | |
| goto fail3; | |
| r = ati_remote2_input_init(ar2); | |
| if (r) | |
| goto fail4; | |
| usb_set_intfdata(interface, ar2); | |
| interface->needs_remote_wakeup = 1; | |
| return 0; | |
| fail4: | |
| sysfs_remove_group(&udev->dev.kobj, &ati_remote2_attr_group); | |
| fail3: | |
| ati_remote2_urb_cleanup(ar2); | |
| fail2: | |
| usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]); | |
| fail1: | |
| kfree(ar2); | |
| return r; | |
| } | |
| static void ati_remote2_disconnect(struct usb_interface *interface) | |
| { | |
| struct ati_remote2 *ar2; | |
| struct usb_host_interface *alt = interface->cur_altsetting; | |
| if (alt->desc.bInterfaceNumber) | |
| return; | |
| ar2 = usb_get_intfdata(interface); | |
| usb_set_intfdata(interface, NULL); | |
| input_unregister_device(ar2->idev); | |
| sysfs_remove_group(&ar2->udev->dev.kobj, &ati_remote2_attr_group); | |
| ati_remote2_urb_cleanup(ar2); | |
| usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]); | |
| kfree(ar2); | |
| } | |
| static int ati_remote2_suspend(struct usb_interface *interface, | |
| pm_message_t message) | |
| { | |
| struct ati_remote2 *ar2; | |
| struct usb_host_interface *alt = interface->cur_altsetting; | |
| if (alt->desc.bInterfaceNumber) | |
| return 0; | |
| ar2 = usb_get_intfdata(interface); | |
| dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__); | |
| mutex_lock(&ati_remote2_mutex); | |
| if (ar2->flags & ATI_REMOTE2_OPENED) | |
| ati_remote2_kill_urbs(ar2); | |
| ar2->flags |= ATI_REMOTE2_SUSPENDED; | |
| mutex_unlock(&ati_remote2_mutex); | |
| return 0; | |
| } | |
| static int ati_remote2_resume(struct usb_interface *interface) | |
| { | |
| struct ati_remote2 *ar2; | |
| struct usb_host_interface *alt = interface->cur_altsetting; | |
| int r = 0; | |
| if (alt->desc.bInterfaceNumber) | |
| return 0; | |
| ar2 = usb_get_intfdata(interface); | |
| dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__); | |
| mutex_lock(&ati_remote2_mutex); | |
| if (ar2->flags & ATI_REMOTE2_OPENED) | |
| r = ati_remote2_submit_urbs(ar2); | |
| if (!r) | |
| ar2->flags &= ~ATI_REMOTE2_SUSPENDED; | |
| mutex_unlock(&ati_remote2_mutex); | |
| return r; | |
| } | |
| static int ati_remote2_reset_resume(struct usb_interface *interface) | |
| { | |
| struct ati_remote2 *ar2; | |
| struct usb_host_interface *alt = interface->cur_altsetting; | |
| int r = 0; | |
| if (alt->desc.bInterfaceNumber) | |
| return 0; | |
| ar2 = usb_get_intfdata(interface); | |
| dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__); | |
| mutex_lock(&ati_remote2_mutex); | |
| r = ati_remote2_setup(ar2, ar2->channel_mask); | |
| if (r) | |
| goto out; | |
| if (ar2->flags & ATI_REMOTE2_OPENED) | |
| r = ati_remote2_submit_urbs(ar2); | |
| if (!r) | |
| ar2->flags &= ~ATI_REMOTE2_SUSPENDED; | |
| out: | |
| mutex_unlock(&ati_remote2_mutex); | |
| return r; | |
| } | |
| static int ati_remote2_pre_reset(struct usb_interface *interface) | |
| { | |
| struct ati_remote2 *ar2; | |
| struct usb_host_interface *alt = interface->cur_altsetting; | |
| if (alt->desc.bInterfaceNumber) | |
| return 0; | |
| ar2 = usb_get_intfdata(interface); | |
| dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__); | |
| mutex_lock(&ati_remote2_mutex); | |
| if (ar2->flags == ATI_REMOTE2_OPENED) | |
| ati_remote2_kill_urbs(ar2); | |
| return 0; | |
| } | |
| static int ati_remote2_post_reset(struct usb_interface *interface) | |
| { | |
| struct ati_remote2 *ar2; | |
| struct usb_host_interface *alt = interface->cur_altsetting; | |
| int r = 0; | |
| if (alt->desc.bInterfaceNumber) | |
| return 0; | |
| ar2 = usb_get_intfdata(interface); | |
| dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__); | |
| if (ar2->flags == ATI_REMOTE2_OPENED) | |
| r = ati_remote2_submit_urbs(ar2); | |
| mutex_unlock(&ati_remote2_mutex); | |
| return r; | |
| } | |
| module_usb_driver(ati_remote2_driver); |