| # | |
| # IPMI device configuration | |
| # | |
| menuconfig IPMI_HANDLER | |
| tristate 'IPMI top-level message handler' | |
| depends on HAS_IOMEM | |
| select IPMI_DMI_DECODE if DMI | |
| help | |
| This enables the central IPMI message handler, required for IPMI | |
| to work. | |
| IPMI is a standard for managing sensors (temperature, | |
| voltage, etc.) in a system. | |
| See <file:Documentation/IPMI.txt> for more details on the driver. | |
| If unsure, say N. | |
| config IPMI_DMI_DECODE | |
| bool | |
| if IPMI_HANDLER | |
| config IPMI_PANIC_EVENT | |
| bool 'Generate a panic event to all BMCs on a panic' | |
| help | |
| When a panic occurs, this will cause the IPMI message handler to, | |
| by default, generate an IPMI event describing the panic to each | |
| interface registered with the message handler. This is always | |
| available, the module parameter for ipmi_msghandler named | |
| panic_op can be set to "event" to chose this value, this config | |
| simply causes the default value to be set to "event". | |
| config IPMI_PANIC_STRING | |
| bool 'Generate OEM events containing the panic string' | |
| depends on IPMI_PANIC_EVENT | |
| help | |
| When a panic occurs, this will cause the IPMI message handler to, | |
| by default, generate IPMI OEM type f0 events holding the IPMB | |
| address of the panic generator (byte 4 of the event), a sequence | |
| number for the string (byte 5 of the event) and part of the | |
| string (the rest of the event). Bytes 1, 2, and 3 are the normal | |
| usage for an OEM event. You can fetch these events and use the | |
| sequence numbers to piece the string together. This config | |
| parameter sets the default value to generate these events, | |
| the module parameter for ipmi_msghandler named panic_op can | |
| be set to "string" to chose this value, this config simply | |
| causes the default value to be set to "string". | |
| config IPMI_DEVICE_INTERFACE | |
| tristate 'Device interface for IPMI' | |
| help | |
| This provides an IOCTL interface to the IPMI message handler so | |
| userland processes may use IPMI. It supports poll() and select(). | |
| config IPMI_SI | |
| tristate 'IPMI System Interface handler' | |
| help | |
| Provides a driver for System Interfaces (KCS, SMIC, BT). | |
| Currently, only KCS and SMIC are supported. If | |
| you are using IPMI, you should probably say "y" here. | |
| config IPMI_SSIF | |
| tristate 'IPMI SMBus handler (SSIF)' | |
| select I2C | |
| help | |
| Provides a driver for a SMBus interface to a BMC, meaning that you | |
| have a driver that must be accessed over an I2C bus instead of a | |
| standard interface. This module requires I2C support. | |
| config IPMI_POWERNV | |
| depends on PPC_POWERNV | |
| tristate 'POWERNV (OPAL firmware) IPMI interface' | |
| help | |
| Provides a driver for OPAL firmware-based IPMI interfaces. | |
| config IPMI_WATCHDOG | |
| tristate 'IPMI Watchdog Timer' | |
| help | |
| This enables the IPMI watchdog timer. | |
| config IPMI_POWEROFF | |
| tristate 'IPMI Poweroff' | |
| help | |
| This enables a function to power off the system with IPMI if | |
| the IPMI management controller is capable of this. | |
| endif # IPMI_HANDLER | |
| config IPMI_KCS_BMC | |
| tristate | |
| config ASPEED_KCS_IPMI_BMC | |
| depends on ARCH_ASPEED || COMPILE_TEST | |
| select IPMI_KCS_BMC | |
| select REGMAP_MMIO | |
| tristate "Aspeed KCS IPMI BMC driver" | |
| help | |
| Provides a driver for the KCS (Keyboard Controller Style) IPMI | |
| interface found on Aspeed SOCs (AST2400 and AST2500). | |
| The driver implements the BMC side of the KCS contorller, it | |
| provides the access of KCS IO space for BMC side. | |
| config NPCM7XX_KCS_IPMI_BMC | |
| depends on ARCH_NPCM7XX || COMPILE_TEST | |
| select IPMI_KCS_BMC | |
| select REGMAP_MMIO | |
| tristate "NPCM7xx KCS IPMI BMC driver" | |
| help | |
| Provides a driver for the KCS (Keyboard Controller Style) IPMI | |
| interface found on Nuvoton NPCM7xx SOCs. | |
| The driver implements the BMC side of the KCS contorller, it | |
| provides the access of KCS IO space for BMC side. | |
| This support is also available as a module. If so, the module | |
| will be called kcs_bmc_npcm7xx. | |
| config ASPEED_BT_IPMI_BMC | |
| depends on ARCH_ASPEED || COMPILE_TEST | |
| depends on REGMAP && REGMAP_MMIO && MFD_SYSCON | |
| tristate "BT IPMI bmc driver" | |
| help | |
| Provides a driver for the BT (Block Transfer) IPMI interface | |
| found on Aspeed SOCs (AST2400 and AST2500). The driver | |
| implements the BMC side of the BT interface. |