| /* | |
| * linux/arch/unicore32/kernel/pm.c | |
| * | |
| * Code specific to PKUnity SoC and UniCore ISA | |
| * | |
| * Maintained by GUAN Xue-tao <gxt@mprc.pku.edu.cn> | |
| * Copyright (C) 2001-2010 Guan Xuetao | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/module.h> | |
| #include <linux/suspend.h> | |
| #include <linux/errno.h> | |
| #include <linux/slab.h> | |
| #include <linux/io.h> | |
| #include <mach/hardware.h> | |
| #include <mach/pm.h> | |
| #include "setup.h" | |
| struct puv3_cpu_pm_fns *puv3_cpu_pm_fns; | |
| static unsigned long *sleep_save; | |
| int puv3_pm_enter(suspend_state_t state) | |
| { | |
| unsigned long sleep_save_checksum = 0, checksum = 0; | |
| int i; | |
| /* skip registers saving for standby */ | |
| if (state != PM_SUSPEND_STANDBY) { | |
| puv3_cpu_pm_fns->save(sleep_save); | |
| /* before sleeping, calculate and save a checksum */ | |
| for (i = 0; i < puv3_cpu_pm_fns->save_count - 1; i++) | |
| sleep_save_checksum += sleep_save[i]; | |
| } | |
| /* *** go zzz *** */ | |
| puv3_cpu_pm_fns->enter(state); | |
| cpu_init(); | |
| #ifdef CONFIG_INPUT_KEYBOARD | |
| puv3_ps2_init(); | |
| #endif | |
| #ifdef CONFIG_PCI | |
| pci_puv3_preinit(); | |
| #endif | |
| if (state != PM_SUSPEND_STANDBY) { | |
| /* after sleeping, validate the checksum */ | |
| for (i = 0; i < puv3_cpu_pm_fns->save_count - 1; i++) | |
| checksum += sleep_save[i]; | |
| /* if invalid, display message and wait for a hardware reset */ | |
| if (checksum != sleep_save_checksum) { | |
| while (1) | |
| puv3_cpu_pm_fns->enter(state); | |
| } | |
| puv3_cpu_pm_fns->restore(sleep_save); | |
| } | |
| pr_debug("*** made it back from resume\n"); | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(puv3_pm_enter); | |
| unsigned long sleep_phys_sp(void *sp) | |
| { | |
| return virt_to_phys(sp); | |
| } | |
| static int puv3_pm_valid(suspend_state_t state) | |
| { | |
| if (puv3_cpu_pm_fns) | |
| return puv3_cpu_pm_fns->valid(state); | |
| return -EINVAL; | |
| } | |
| static int puv3_pm_prepare(void) | |
| { | |
| int ret = 0; | |
| if (puv3_cpu_pm_fns && puv3_cpu_pm_fns->prepare) | |
| ret = puv3_cpu_pm_fns->prepare(); | |
| return ret; | |
| } | |
| static void puv3_pm_finish(void) | |
| { | |
| if (puv3_cpu_pm_fns && puv3_cpu_pm_fns->finish) | |
| puv3_cpu_pm_fns->finish(); | |
| } | |
| static struct platform_suspend_ops puv3_pm_ops = { | |
| .valid = puv3_pm_valid, | |
| .enter = puv3_pm_enter, | |
| .prepare = puv3_pm_prepare, | |
| .finish = puv3_pm_finish, | |
| }; | |
| static int __init puv3_pm_init(void) | |
| { | |
| if (!puv3_cpu_pm_fns) { | |
| printk(KERN_ERR "no valid puv3_cpu_pm_fns defined\n"); | |
| return -EINVAL; | |
| } | |
| sleep_save = kmalloc_array(puv3_cpu_pm_fns->save_count, | |
| sizeof(unsigned long), | |
| GFP_KERNEL); | |
| if (!sleep_save) { | |
| printk(KERN_ERR "failed to alloc memory for pm save\n"); | |
| return -ENOMEM; | |
| } | |
| suspend_set_ops(&puv3_pm_ops); | |
| return 0; | |
| } | |
| device_initcall(puv3_pm_init); |