| * MSM Serial UART | |
| The MSM serial UART hardware is designed for low-speed use cases where a | |
| dma-engine isn't needed. From a software perspective it's mostly compatible | |
| with the MSM serial UARTDM except that it only supports reading and writing one | |
| character at a time. | |
| Required properties: | |
| - compatible: Should contain "qcom,msm-uart" | |
| - reg: Should contain UART register location and length. | |
| - interrupts: Should contain UART interrupt. | |
| - clocks: Should contain the core clock. | |
| - clock-names: Should be "core". | |
| Example: | |
| A uart device at 0xa9c00000 with interrupt 11. | |
| serial@a9c00000 { | |
| compatible = "qcom,msm-uart"; | |
| reg = <0xa9c00000 0x1000>; | |
| interrupts = <11>; | |
| clocks = <&uart_cxc>; | |
| clock-names = "core"; | |
| }; |