| * Clock bindings for Freescale i.MX5 | |
| Required properties: | |
| - compatible: Should be "fsl,<soc>-ccm" , where <soc> can be imx51 or imx53 | |
| - reg: Address and length of the register set | |
| - interrupts: Should contain CCM interrupt | |
| - #clock-cells: Should be <1> | |
| The clock consumer should specify the desired clock by having the clock | |
| ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h | |
| for the full list of i.MX5 clock IDs. | |
| Examples (for mx53): | |
| clks: ccm@53fd4000{ | |
| compatible = "fsl,imx53-ccm"; | |
| reg = <0x53fd4000 0x4000>; | |
| interrupts = <0 71 0x04 0 72 0x04>; | |
| #clock-cells = <1>; | |
| }; | |
| can1: can@53fc8000 { | |
| compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; | |
| reg = <0x53fc8000 0x4000>; | |
| interrupts = <82>; | |
| clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>; | |
| clock-names = "ipg", "per"; | |
| }; |