| // SPDX-License-Identifier: GPL-2.0 |
| // Copyright (c) 2017-18 Linaro Limited |
| // |
| // Based on msm-rng.c and downstream driver |
| |
| #include <crypto/internal/rng.h> |
| #include <linux/acpi.h> |
| #include <linux/clk.h> |
| #include <linux/crypto.h> |
| #include <linux/iopoll.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| |
| /* Device specific register offsets */ |
| #define PRNG_DATA_OUT 0x0000 |
| #define PRNG_STATUS 0x0004 |
| #define PRNG_LFSR_CFG 0x0100 |
| #define PRNG_CONFIG 0x0104 |
| |
| /* Device specific register masks and config values */ |
| #define PRNG_LFSR_CFG_MASK 0x0000ffff |
| #define PRNG_LFSR_CFG_CLOCKS 0x0000dddd |
| #define PRNG_CONFIG_HW_ENABLE BIT(1) |
| #define PRNG_STATUS_DATA_AVAIL BIT(0) |
| |
| #define WORD_SZ 4 |
| |
| struct qcom_rng { |
| struct mutex lock; |
| void __iomem *base; |
| struct clk *clk; |
| unsigned int skip_init; |
| }; |
| |
| struct qcom_rng_ctx { |
| struct qcom_rng *rng; |
| }; |
| |
| static struct qcom_rng *qcom_rng_dev; |
| |
| static int qcom_rng_read(struct qcom_rng *rng, u8 *data, unsigned int max) |
| { |
| unsigned int currsize = 0; |
| u32 val; |
| int ret; |
| |
| /* read random data from hardware */ |
| do { |
| ret = readl_poll_timeout(rng->base + PRNG_STATUS, val, |
| val & PRNG_STATUS_DATA_AVAIL, |
| 200, 10000); |
| if (ret) |
| return ret; |
| |
| val = readl_relaxed(rng->base + PRNG_DATA_OUT); |
| if (!val) |
| return -EINVAL; |
| |
| if ((max - currsize) >= WORD_SZ) { |
| memcpy(data, &val, WORD_SZ); |
| data += WORD_SZ; |
| currsize += WORD_SZ; |
| } else { |
| /* copy only remaining bytes */ |
| memcpy(data, &val, max - currsize); |
| break; |
| } |
| } while (currsize < max); |
| |
| return 0; |
| } |
| |
| static int qcom_rng_generate(struct crypto_rng *tfm, |
| const u8 *src, unsigned int slen, |
| u8 *dstn, unsigned int dlen) |
| { |
| struct qcom_rng_ctx *ctx = crypto_rng_ctx(tfm); |
| struct qcom_rng *rng = ctx->rng; |
| int ret; |
| |
| ret = clk_prepare_enable(rng->clk); |
| if (ret) |
| return ret; |
| |
| mutex_lock(&rng->lock); |
| |
| ret = qcom_rng_read(rng, dstn, dlen); |
| |
| mutex_unlock(&rng->lock); |
| clk_disable_unprepare(rng->clk); |
| |
| return ret; |
| } |
| |
| static int qcom_rng_seed(struct crypto_rng *tfm, const u8 *seed, |
| unsigned int slen) |
| { |
| return 0; |
| } |
| |
| static int qcom_rng_enable(struct qcom_rng *rng) |
| { |
| u32 val; |
| int ret; |
| |
| ret = clk_prepare_enable(rng->clk); |
| if (ret) |
| return ret; |
| |
| /* Enable PRNG only if it is not already enabled */ |
| val = readl_relaxed(rng->base + PRNG_CONFIG); |
| if (val & PRNG_CONFIG_HW_ENABLE) |
| goto already_enabled; |
| |
| val = readl_relaxed(rng->base + PRNG_LFSR_CFG); |
| val &= ~PRNG_LFSR_CFG_MASK; |
| val |= PRNG_LFSR_CFG_CLOCKS; |
| writel(val, rng->base + PRNG_LFSR_CFG); |
| |
| val = readl_relaxed(rng->base + PRNG_CONFIG); |
| val |= PRNG_CONFIG_HW_ENABLE; |
| writel(val, rng->base + PRNG_CONFIG); |
| |
| already_enabled: |
| clk_disable_unprepare(rng->clk); |
| |
| return 0; |
| } |
| |
| static int qcom_rng_init(struct crypto_tfm *tfm) |
| { |
| struct qcom_rng_ctx *ctx = crypto_tfm_ctx(tfm); |
| |
| ctx->rng = qcom_rng_dev; |
| |
| if (!ctx->rng->skip_init) |
| return qcom_rng_enable(ctx->rng); |
| |
| return 0; |
| } |
| |
| static struct rng_alg qcom_rng_alg = { |
| .generate = qcom_rng_generate, |
| .seed = qcom_rng_seed, |
| .seedsize = 0, |
| .base = { |
| .cra_name = "stdrng", |
| .cra_driver_name = "qcom-rng", |
| .cra_flags = CRYPTO_ALG_TYPE_RNG, |
| .cra_priority = 300, |
| .cra_ctxsize = sizeof(struct qcom_rng_ctx), |
| .cra_module = THIS_MODULE, |
| .cra_init = qcom_rng_init, |
| } |
| }; |
| |
| static int qcom_rng_probe(struct platform_device *pdev) |
| { |
| struct qcom_rng *rng; |
| int ret; |
| |
| rng = devm_kzalloc(&pdev->dev, sizeof(*rng), GFP_KERNEL); |
| if (!rng) |
| return -ENOMEM; |
| |
| platform_set_drvdata(pdev, rng); |
| mutex_init(&rng->lock); |
| |
| rng->base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(rng->base)) |
| return PTR_ERR(rng->base); |
| |
| /* ACPI systems have clk already on, so skip clk_get */ |
| if (!has_acpi_companion(&pdev->dev)) { |
| rng->clk = devm_clk_get(&pdev->dev, "core"); |
| if (IS_ERR(rng->clk)) |
| return PTR_ERR(rng->clk); |
| } |
| |
| |
| rng->skip_init = (unsigned long)device_get_match_data(&pdev->dev); |
| |
| qcom_rng_dev = rng; |
| ret = crypto_register_rng(&qcom_rng_alg); |
| if (ret) { |
| dev_err(&pdev->dev, "Register crypto rng failed: %d\n", ret); |
| qcom_rng_dev = NULL; |
| } |
| |
| return ret; |
| } |
| |
| static int qcom_rng_remove(struct platform_device *pdev) |
| { |
| crypto_unregister_rng(&qcom_rng_alg); |
| |
| qcom_rng_dev = NULL; |
| |
| return 0; |
| } |
| |
| #if IS_ENABLED(CONFIG_ACPI) |
| static const struct acpi_device_id qcom_rng_acpi_match[] = { |
| { .id = "QCOM8160", .driver_data = 1 }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(acpi, qcom_rng_acpi_match); |
| #endif |
| |
| static const struct of_device_id qcom_rng_of_match[] = { |
| { .compatible = "qcom,prng", .data = (void *)0}, |
| { .compatible = "qcom,prng-ee", .data = (void *)1}, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, qcom_rng_of_match); |
| |
| static struct platform_driver qcom_rng_driver = { |
| .probe = qcom_rng_probe, |
| .remove = qcom_rng_remove, |
| .driver = { |
| .name = KBUILD_MODNAME, |
| .of_match_table = of_match_ptr(qcom_rng_of_match), |
| .acpi_match_table = ACPI_PTR(qcom_rng_acpi_match), |
| } |
| }; |
| module_platform_driver(qcom_rng_driver); |
| |
| MODULE_ALIAS("platform:" KBUILD_MODNAME); |
| MODULE_DESCRIPTION("Qualcomm random number generator driver"); |
| MODULE_LICENSE("GPL v2"); |