| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* |
| * linux/arch/x86/kernel/head_64.S -- start in 32bit and switch to 64bit |
| * |
| * Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE |
| * Copyright (C) 2000 Pavel Machek <pavel@suse.cz> |
| * Copyright (C) 2000 Karsten Keil <kkeil@suse.de> |
| * Copyright (C) 2001,2002 Andi Kleen <ak@suse.de> |
| * Copyright (C) 2005 Eric Biederman <ebiederm@xmission.com> |
| */ |
| |
| |
| #include <linux/linkage.h> |
| #include <linux/threads.h> |
| #include <linux/init.h> |
| #include <asm/segment.h> |
| #include <asm/pgtable.h> |
| #include <asm/page.h> |
| #include <asm/msr.h> |
| #include <asm/cache.h> |
| #include <asm/processor-flags.h> |
| #include <asm/percpu.h> |
| #include <asm/nops.h> |
| #include "../entry/calling.h" |
| #include <asm/export.h> |
| #include <asm/nospec-branch.h> |
| #include <asm/fixmap.h> |
| |
| #ifdef CONFIG_PARAVIRT_XXL |
| #include <asm/asm-offsets.h> |
| #include <asm/paravirt.h> |
| #else |
| #define INTERRUPT_RETURN iretq |
| #endif |
| |
| /* we are not able to switch in one step to the final KERNEL ADDRESS SPACE |
| * because we need identity-mapped pages. |
| * |
| */ |
| |
| #define l4_index(x) (((x) >> 39) & 511) |
| #define pud_index(x) (((x) >> PUD_SHIFT) & (PTRS_PER_PUD-1)) |
| |
| L4_PAGE_OFFSET = l4_index(__PAGE_OFFSET_BASE_L4) |
| L4_START_KERNEL = l4_index(__START_KERNEL_map) |
| |
| L3_START_KERNEL = pud_index(__START_KERNEL_map) |
| |
| .text |
| __HEAD |
| .code64 |
| .globl startup_64 |
| startup_64: |
| UNWIND_HINT_EMPTY |
| /* |
| * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0, |
| * and someone has loaded an identity mapped page table |
| * for us. These identity mapped page tables map all of the |
| * kernel pages and possibly all of memory. |
| * |
| * %rsi holds a physical pointer to real_mode_data. |
| * |
| * We come here either directly from a 64bit bootloader, or from |
| * arch/x86/boot/compressed/head_64.S. |
| * |
| * We only come here initially at boot nothing else comes here. |
| * |
| * Since we may be loaded at an address different from what we were |
| * compiled to run at we first fixup the physical addresses in our page |
| * tables and then reload them. |
| */ |
| |
| /* Set up the stack for verify_cpu(), similar to initial_stack below */ |
| leaq (__end_init_task - SIZEOF_PTREGS)(%rip), %rsp |
| |
| /* Sanitize CPU configuration */ |
| call verify_cpu |
| |
| /* |
| * Perform pagetable fixups. Additionally, if SME is active, encrypt |
| * the kernel and retrieve the modifier (SME encryption mask if SME |
| * is active) to be added to the initial pgdir entry that will be |
| * programmed into CR3. |
| */ |
| leaq _text(%rip), %rdi |
| pushq %rsi |
| call __startup_64 |
| popq %rsi |
| |
| /* Form the CR3 value being sure to include the CR3 modifier */ |
| addq $(early_top_pgt - __START_KERNEL_map), %rax |
| jmp 1f |
| ENTRY(secondary_startup_64) |
| UNWIND_HINT_EMPTY |
| /* |
| * At this point the CPU runs in 64bit mode CS.L = 1 CS.D = 0, |
| * and someone has loaded a mapped page table. |
| * |
| * %rsi holds a physical pointer to real_mode_data. |
| * |
| * We come here either from startup_64 (using physical addresses) |
| * or from trampoline.S (using virtual addresses). |
| * |
| * Using virtual addresses from trampoline.S removes the need |
| * to have any identity mapped pages in the kernel page table |
| * after the boot processor executes this code. |
| */ |
| |
| /* Sanitize CPU configuration */ |
| call verify_cpu |
| |
| /* |
| * Retrieve the modifier (SME encryption mask if SME is active) to be |
| * added to the initial pgdir entry that will be programmed into CR3. |
| */ |
| pushq %rsi |
| call __startup_secondary_64 |
| popq %rsi |
| |
| /* Form the CR3 value being sure to include the CR3 modifier */ |
| addq $(init_top_pgt - __START_KERNEL_map), %rax |
| 1: |
| |
| /* Enable PAE mode, PGE and LA57 */ |
| movl $(X86_CR4_PAE | X86_CR4_PGE), %ecx |
| #ifdef CONFIG_X86_5LEVEL |
| testl $1, __pgtable_l5_enabled(%rip) |
| jz 1f |
| orl $X86_CR4_LA57, %ecx |
| 1: |
| #endif |
| movq %rcx, %cr4 |
| |
| /* Setup early boot stage 4-/5-level pagetables. */ |
| addq phys_base(%rip), %rax |
| movq %rax, %cr3 |
| |
| /* Ensure I am executing from virtual addresses */ |
| movq $1f, %rax |
| ANNOTATE_RETPOLINE_SAFE |
| jmp *%rax |
| 1: |
| UNWIND_HINT_EMPTY |
| |
| /* Check if nx is implemented */ |
| movl $0x80000001, %eax |
| cpuid |
| movl %edx,%edi |
| |
| /* Setup EFER (Extended Feature Enable Register) */ |
| movl $MSR_EFER, %ecx |
| rdmsr |
| btsl $_EFER_SCE, %eax /* Enable System Call */ |
| btl $20,%edi /* No Execute supported? */ |
| jnc 1f |
| btsl $_EFER_NX, %eax |
| btsq $_PAGE_BIT_NX,early_pmd_flags(%rip) |
| 1: wrmsr /* Make changes effective */ |
| |
| /* Setup cr0 */ |
| movl $CR0_STATE, %eax |
| /* Make changes effective */ |
| movq %rax, %cr0 |
| |
| /* Setup a boot time stack */ |
| movq initial_stack(%rip), %rsp |
| |
| /* zero EFLAGS after setting rsp */ |
| pushq $0 |
| popfq |
| |
| /* |
| * We must switch to a new descriptor in kernel space for the GDT |
| * because soon the kernel won't have access anymore to the userspace |
| * addresses where we're currently running on. We have to do that here |
| * because in 32bit we couldn't load a 64bit linear address. |
| */ |
| lgdt early_gdt_descr(%rip) |
| |
| /* set up data segments */ |
| xorl %eax,%eax |
| movl %eax,%ds |
| movl %eax,%ss |
| movl %eax,%es |
| |
| /* |
| * We don't really need to load %fs or %gs, but load them anyway |
| * to kill any stale realmode selectors. This allows execution |
| * under VT hardware. |
| */ |
| movl %eax,%fs |
| movl %eax,%gs |
| |
| /* Set up %gs. |
| * |
| * The base of %gs always points to fixed_percpu_data. If the |
| * stack protector canary is enabled, it is located at %gs:40. |
| * Note that, on SMP, the boot cpu uses init data section until |
| * the per cpu areas are set up. |
| */ |
| movl $MSR_GS_BASE,%ecx |
| movl initial_gs(%rip),%eax |
| movl initial_gs+4(%rip),%edx |
| wrmsr |
| |
| /* rsi is pointer to real mode structure with interesting info. |
| pass it to C */ |
| movq %rsi, %rdi |
| |
| .Ljump_to_C_code: |
| /* |
| * Jump to run C code and to be on a real kernel address. |
| * Since we are running on identity-mapped space we have to jump |
| * to the full 64bit address, this is only possible as indirect |
| * jump. In addition we need to ensure %cs is set so we make this |
| * a far return. |
| * |
| * Note: do not change to far jump indirect with 64bit offset. |
| * |
| * AMD does not support far jump indirect with 64bit offset. |
| * AMD64 Architecture Programmer's Manual, Volume 3: states only |
| * JMP FAR mem16:16 FF /5 Far jump indirect, |
| * with the target specified by a far pointer in memory. |
| * JMP FAR mem16:32 FF /5 Far jump indirect, |
| * with the target specified by a far pointer in memory. |
| * |
| * Intel64 does support 64bit offset. |
| * Software Developer Manual Vol 2: states: |
| * FF /5 JMP m16:16 Jump far, absolute indirect, |
| * address given in m16:16 |
| * FF /5 JMP m16:32 Jump far, absolute indirect, |
| * address given in m16:32. |
| * REX.W + FF /5 JMP m16:64 Jump far, absolute indirect, |
| * address given in m16:64. |
| */ |
| pushq $.Lafter_lret # put return address on stack for unwinder |
| xorl %ebp, %ebp # clear frame pointer |
| movq initial_code(%rip), %rax |
| pushq $__KERNEL_CS # set correct cs |
| pushq %rax # target address in negative space |
| lretq |
| .Lafter_lret: |
| END(secondary_startup_64) |
| |
| #include "verify_cpu.S" |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| /* |
| * Boot CPU0 entry point. It's called from play_dead(). Everything has been set |
| * up already except stack. We just set up stack here. Then call |
| * start_secondary() via .Ljump_to_C_code. |
| */ |
| ENTRY(start_cpu0) |
| UNWIND_HINT_EMPTY |
| movq initial_stack(%rip), %rsp |
| jmp .Ljump_to_C_code |
| END(start_cpu0) |
| #endif |
| |
| /* Both SMP bootup and ACPI suspend change these variables */ |
| __REFDATA |
| .balign 8 |
| GLOBAL(initial_code) |
| .quad x86_64_start_kernel |
| GLOBAL(initial_gs) |
| .quad INIT_PER_CPU_VAR(fixed_percpu_data) |
| GLOBAL(initial_stack) |
| /* |
| * The SIZEOF_PTREGS gap is a convention which helps the in-kernel |
| * unwinder reliably detect the end of the stack. |
| */ |
| .quad init_thread_union + THREAD_SIZE - SIZEOF_PTREGS |
| __FINITDATA |
| |
| __INIT |
| ENTRY(early_idt_handler_array) |
| i = 0 |
| .rept NUM_EXCEPTION_VECTORS |
| .if ((EXCEPTION_ERRCODE_MASK >> i) & 1) == 0 |
| UNWIND_HINT_IRET_REGS |
| pushq $0 # Dummy error code, to make stack frame uniform |
| .else |
| UNWIND_HINT_IRET_REGS offset=8 |
| .endif |
| pushq $i # 72(%rsp) Vector number |
| jmp early_idt_handler_common |
| UNWIND_HINT_IRET_REGS |
| i = i + 1 |
| .fill early_idt_handler_array + i*EARLY_IDT_HANDLER_SIZE - ., 1, 0xcc |
| .endr |
| UNWIND_HINT_IRET_REGS offset=16 |
| END(early_idt_handler_array) |
| |
| early_idt_handler_common: |
| /* |
| * The stack is the hardware frame, an error code or zero, and the |
| * vector number. |
| */ |
| cld |
| |
| incl early_recursion_flag(%rip) |
| |
| /* The vector number is currently in the pt_regs->di slot. */ |
| pushq %rsi /* pt_regs->si */ |
| movq 8(%rsp), %rsi /* RSI = vector number */ |
| movq %rdi, 8(%rsp) /* pt_regs->di = RDI */ |
| pushq %rdx /* pt_regs->dx */ |
| pushq %rcx /* pt_regs->cx */ |
| pushq %rax /* pt_regs->ax */ |
| pushq %r8 /* pt_regs->r8 */ |
| pushq %r9 /* pt_regs->r9 */ |
| pushq %r10 /* pt_regs->r10 */ |
| pushq %r11 /* pt_regs->r11 */ |
| pushq %rbx /* pt_regs->bx */ |
| pushq %rbp /* pt_regs->bp */ |
| pushq %r12 /* pt_regs->r12 */ |
| pushq %r13 /* pt_regs->r13 */ |
| pushq %r14 /* pt_regs->r14 */ |
| pushq %r15 /* pt_regs->r15 */ |
| UNWIND_HINT_REGS |
| |
| cmpq $14,%rsi /* Page fault? */ |
| jnz 10f |
| GET_CR2_INTO(%rdi) /* can clobber %rax if pv */ |
| call early_make_pgtable |
| andl %eax,%eax |
| jz 20f /* All good */ |
| |
| 10: |
| movq %rsp,%rdi /* RDI = pt_regs; RSI is already trapnr */ |
| call early_fixup_exception |
| |
| 20: |
| decl early_recursion_flag(%rip) |
| jmp restore_regs_and_return_to_kernel |
| END(early_idt_handler_common) |
| |
| __INITDATA |
| |
| .balign 4 |
| GLOBAL(early_recursion_flag) |
| .long 0 |
| |
| #define NEXT_PAGE(name) \ |
| .balign PAGE_SIZE; \ |
| GLOBAL(name) |
| |
| #ifdef CONFIG_PAGE_TABLE_ISOLATION |
| /* |
| * Each PGD needs to be 8k long and 8k aligned. We do not |
| * ever go out to userspace with these, so we do not |
| * strictly *need* the second page, but this allows us to |
| * have a single set_pgd() implementation that does not |
| * need to worry about whether it has 4k or 8k to work |
| * with. |
| * |
| * This ensures PGDs are 8k long: |
| */ |
| #define PTI_USER_PGD_FILL 512 |
| /* This ensures they are 8k-aligned: */ |
| #define NEXT_PGD_PAGE(name) \ |
| .balign 2 * PAGE_SIZE; \ |
| GLOBAL(name) |
| #else |
| #define NEXT_PGD_PAGE(name) NEXT_PAGE(name) |
| #define PTI_USER_PGD_FILL 0 |
| #endif |
| |
| /* Automate the creation of 1 to 1 mapping pmd entries */ |
| #define PMDS(START, PERM, COUNT) \ |
| i = 0 ; \ |
| .rept (COUNT) ; \ |
| .quad (START) + (i << PMD_SHIFT) + (PERM) ; \ |
| i = i + 1 ; \ |
| .endr |
| |
| __INITDATA |
| NEXT_PGD_PAGE(early_top_pgt) |
| .fill 512,8,0 |
| .fill PTI_USER_PGD_FILL,8,0 |
| |
| NEXT_PAGE(early_dynamic_pgts) |
| .fill 512*EARLY_DYNAMIC_PAGE_TABLES,8,0 |
| |
| .data |
| |
| #if defined(CONFIG_XEN_PV) || defined(CONFIG_PVH) |
| NEXT_PGD_PAGE(init_top_pgt) |
| .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC |
| .org init_top_pgt + L4_PAGE_OFFSET*8, 0 |
| .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC |
| .org init_top_pgt + L4_START_KERNEL*8, 0 |
| /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ |
| .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC |
| .fill PTI_USER_PGD_FILL,8,0 |
| |
| NEXT_PAGE(level3_ident_pgt) |
| .quad level2_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC |
| .fill 511, 8, 0 |
| NEXT_PAGE(level2_ident_pgt) |
| /* |
| * Since I easily can, map the first 1G. |
| * Don't set NX because code runs from these pages. |
| * |
| * Note: This sets _PAGE_GLOBAL despite whether |
| * the CPU supports it or it is enabled. But, |
| * the CPU should ignore the bit. |
| */ |
| PMDS(0, __PAGE_KERNEL_IDENT_LARGE_EXEC, PTRS_PER_PMD) |
| #else |
| NEXT_PGD_PAGE(init_top_pgt) |
| .fill 512,8,0 |
| .fill PTI_USER_PGD_FILL,8,0 |
| #endif |
| |
| #ifdef CONFIG_X86_5LEVEL |
| NEXT_PAGE(level4_kernel_pgt) |
| .fill 511,8,0 |
| .quad level3_kernel_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC |
| #endif |
| |
| NEXT_PAGE(level3_kernel_pgt) |
| .fill L3_START_KERNEL,8,0 |
| /* (2^48-(2*1024*1024*1024)-((2^39)*511))/(2^30) = 510 */ |
| .quad level2_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE_NOENC |
| .quad level2_fixmap_pgt - __START_KERNEL_map + _PAGE_TABLE_NOENC |
| |
| NEXT_PAGE(level2_kernel_pgt) |
| /* |
| * 512 MB kernel mapping. We spend a full page on this pagetable |
| * anyway. |
| * |
| * The kernel code+data+bss must not be bigger than that. |
| * |
| * (NOTE: at +512MB starts the module area, see MODULES_VADDR. |
| * If you want to increase this then increase MODULES_VADDR |
| * too.) |
| * |
| * This table is eventually used by the kernel during normal |
| * runtime. Care must be taken to clear out undesired bits |
| * later, like _PAGE_RW or _PAGE_GLOBAL in some cases. |
| */ |
| PMDS(0, __PAGE_KERNEL_LARGE_EXEC, |
| KERNEL_IMAGE_SIZE/PMD_SIZE) |
| |
| NEXT_PAGE(level2_fixmap_pgt) |
| .fill (512 - 4 - FIXMAP_PMD_NUM),8,0 |
| pgtno = 0 |
| .rept (FIXMAP_PMD_NUM) |
| .quad level1_fixmap_pgt + (pgtno << PAGE_SHIFT) - __START_KERNEL_map \ |
| + _PAGE_TABLE_NOENC; |
| pgtno = pgtno + 1 |
| .endr |
| /* 6 MB reserved space + a 2MB hole */ |
| .fill 4,8,0 |
| |
| NEXT_PAGE(level1_fixmap_pgt) |
| .rept (FIXMAP_PMD_NUM) |
| .fill 512,8,0 |
| .endr |
| |
| #undef PMDS |
| |
| .data |
| .align 16 |
| .globl early_gdt_descr |
| early_gdt_descr: |
| .word GDT_ENTRIES*8-1 |
| early_gdt_descr_base: |
| .quad INIT_PER_CPU_VAR(gdt_page) |
| |
| ENTRY(phys_base) |
| /* This must match the first entry in level2_kernel_pgt */ |
| .quad 0x0000000000000000 |
| EXPORT_SYMBOL(phys_base) |
| |
| #include "../../x86/xen/xen-head.S" |
| |
| __PAGE_ALIGNED_BSS |
| NEXT_PAGE(empty_zero_page) |
| .skip PAGE_SIZE |
| EXPORT_SYMBOL(empty_zero_page) |
| |