| /* | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| * | |
| * Copyright (C) 1995 - 2000 by Ralf Baechle | |
| */ | |
| #include <linux/context_tracking.h> | |
| #include <linux/signal.h> | |
| #include <linux/sched.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kernel.h> | |
| #include <linux/errno.h> | |
| #include <linux/string.h> | |
| #include <linux/types.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/ratelimit.h> | |
| #include <linux/mman.h> | |
| #include <linux/mm.h> | |
| #include <linux/smp.h> | |
| #include <linux/kprobes.h> | |
| #include <linux/perf_event.h> | |
| #include <linux/uaccess.h> | |
| #include <asm/branch.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/ptrace.h> | |
| #include <asm/highmem.h> /* For VMALLOC_END */ | |
| #include <linux/kdebug.h> | |
| int show_unhandled_signals = 1; | |
| /* | |
| * This routine handles page faults. It determines the address, | |
| * and the problem, and then passes it off to one of the appropriate | |
| * routines. | |
| */ | |
| static void __kprobes __do_page_fault(struct pt_regs *regs, unsigned long write, | |
| unsigned long address) | |
| { | |
| struct vm_area_struct * vma = NULL; | |
| struct task_struct *tsk = current; | |
| struct mm_struct *mm = tsk->mm; | |
| const int field = sizeof(unsigned long) * 2; | |
| siginfo_t info; | |
| int fault; | |
| unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; | |
| static DEFINE_RATELIMIT_STATE(ratelimit_state, 5 * HZ, 10); | |
| #if 0 | |
| printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", raw_smp_processor_id(), | |
| current->comm, current->pid, field, address, write, | |
| field, regs->cp0_epc); | |
| #endif | |
| #ifdef CONFIG_KPROBES | |
| /* | |
| * This is to notify the fault handler of the kprobes. | |
| */ | |
| if (notify_die(DIE_PAGE_FAULT, "page fault", regs, -1, | |
| current->thread.trap_nr, SIGSEGV) == NOTIFY_STOP) | |
| return; | |
| #endif | |
| info.si_code = SEGV_MAPERR; | |
| /* | |
| * We fault-in kernel-space virtual memory on-demand. The | |
| * 'reference' page table is init_mm.pgd. | |
| * | |
| * NOTE! We MUST NOT take any locks for this case. We may | |
| * be in an interrupt or a critical region, and should | |
| * only copy the information from the master page table, | |
| * nothing more. | |
| */ | |
| #ifdef CONFIG_64BIT | |
| # define VMALLOC_FAULT_TARGET no_context | |
| #else | |
| # define VMALLOC_FAULT_TARGET vmalloc_fault | |
| #endif | |
| if (unlikely(address >= VMALLOC_START && address <= VMALLOC_END)) | |
| goto VMALLOC_FAULT_TARGET; | |
| #ifdef MODULE_START | |
| if (unlikely(address >= MODULE_START && address < MODULE_END)) | |
| goto VMALLOC_FAULT_TARGET; | |
| #endif | |
| /* | |
| * If we're in an interrupt or have no user | |
| * context, we must not take the fault.. | |
| */ | |
| if (faulthandler_disabled() || !mm) | |
| goto bad_area_nosemaphore; | |
| if (user_mode(regs)) | |
| flags |= FAULT_FLAG_USER; | |
| retry: | |
| down_read(&mm->mmap_sem); | |
| vma = find_vma(mm, address); | |
| if (!vma) | |
| goto bad_area; | |
| if (vma->vm_start <= address) | |
| goto good_area; | |
| if (!(vma->vm_flags & VM_GROWSDOWN)) | |
| goto bad_area; | |
| if (expand_stack(vma, address)) | |
| goto bad_area; | |
| /* | |
| * Ok, we have a good vm_area for this memory access, so | |
| * we can handle it.. | |
| */ | |
| good_area: | |
| info.si_code = SEGV_ACCERR; | |
| if (write) { | |
| if (!(vma->vm_flags & VM_WRITE)) | |
| goto bad_area; | |
| flags |= FAULT_FLAG_WRITE; | |
| } else { | |
| if (cpu_has_rixi) { | |
| if (address == regs->cp0_epc && !(vma->vm_flags & VM_EXEC)) { | |
| #if 0 | |
| pr_notice("Cpu%d[%s:%d:%0*lx:%ld:%0*lx] XI violation\n", | |
| raw_smp_processor_id(), | |
| current->comm, current->pid, | |
| field, address, write, | |
| field, regs->cp0_epc); | |
| #endif | |
| goto bad_area; | |
| } | |
| if (!(vma->vm_flags & VM_READ) && | |
| exception_epc(regs) != address) { | |
| #if 0 | |
| pr_notice("Cpu%d[%s:%d:%0*lx:%ld:%0*lx] RI violation\n", | |
| raw_smp_processor_id(), | |
| current->comm, current->pid, | |
| field, address, write, | |
| field, regs->cp0_epc); | |
| #endif | |
| goto bad_area; | |
| } | |
| } else { | |
| if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC))) | |
| goto bad_area; | |
| } | |
| } | |
| /* | |
| * If for any reason at all we couldn't handle the fault, | |
| * make sure we exit gracefully rather than endlessly redo | |
| * the fault. | |
| */ | |
| fault = handle_mm_fault(vma, address, flags); | |
| if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) | |
| return; | |
| perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address); | |
| if (unlikely(fault & VM_FAULT_ERROR)) { | |
| if (fault & VM_FAULT_OOM) | |
| goto out_of_memory; | |
| else if (fault & VM_FAULT_SIGSEGV) | |
| goto bad_area; | |
| else if (fault & VM_FAULT_SIGBUS) | |
| goto do_sigbus; | |
| BUG(); | |
| } | |
| if (flags & FAULT_FLAG_ALLOW_RETRY) { | |
| if (fault & VM_FAULT_MAJOR) { | |
| perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, | |
| regs, address); | |
| tsk->maj_flt++; | |
| } else { | |
| perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, | |
| regs, address); | |
| tsk->min_flt++; | |
| } | |
| if (fault & VM_FAULT_RETRY) { | |
| flags &= ~FAULT_FLAG_ALLOW_RETRY; | |
| flags |= FAULT_FLAG_TRIED; | |
| /* | |
| * No need to up_read(&mm->mmap_sem) as we would | |
| * have already released it in __lock_page_or_retry | |
| * in mm/filemap.c. | |
| */ | |
| goto retry; | |
| } | |
| } | |
| up_read(&mm->mmap_sem); | |
| return; | |
| /* | |
| * Something tried to access memory that isn't in our memory map.. | |
| * Fix it, but check if it's kernel or user first.. | |
| */ | |
| bad_area: | |
| up_read(&mm->mmap_sem); | |
| bad_area_nosemaphore: | |
| /* User mode accesses just cause a SIGSEGV */ | |
| if (user_mode(regs)) { | |
| tsk->thread.cp0_badvaddr = address; | |
| tsk->thread.error_code = write; | |
| if (show_unhandled_signals && | |
| unhandled_signal(tsk, SIGSEGV) && | |
| __ratelimit(&ratelimit_state)) { | |
| pr_info("do_page_fault(): sending SIGSEGV to %s for invalid %s %0*lx\n", | |
| tsk->comm, | |
| write ? "write access to" : "read access from", | |
| field, address); | |
| pr_info("epc = %0*lx in", field, | |
| (unsigned long) regs->cp0_epc); | |
| print_vma_addr(KERN_CONT " ", regs->cp0_epc); | |
| pr_cont("\n"); | |
| pr_info("ra = %0*lx in", field, | |
| (unsigned long) regs->regs[31]); | |
| print_vma_addr(KERN_CONT " ", regs->regs[31]); | |
| pr_cont("\n"); | |
| } | |
| current->thread.trap_nr = (regs->cp0_cause >> 2) & 0x1f; | |
| info.si_signo = SIGSEGV; | |
| info.si_errno = 0; | |
| /* info.si_code has been set above */ | |
| info.si_addr = (void __user *) address; | |
| force_sig_info(SIGSEGV, &info, tsk); | |
| return; | |
| } | |
| no_context: | |
| /* Are we prepared to handle this kernel fault? */ | |
| if (fixup_exception(regs)) { | |
| current->thread.cp0_baduaddr = address; | |
| return; | |
| } | |
| /* | |
| * Oops. The kernel tried to access some bad page. We'll have to | |
| * terminate things with extreme prejudice. | |
| */ | |
| bust_spinlocks(1); | |
| printk(KERN_ALERT "CPU %d Unable to handle kernel paging request at " | |
| "virtual address %0*lx, epc == %0*lx, ra == %0*lx\n", | |
| raw_smp_processor_id(), field, address, field, regs->cp0_epc, | |
| field, regs->regs[31]); | |
| die("Oops", regs); | |
| out_of_memory: | |
| /* | |
| * We ran out of memory, call the OOM killer, and return the userspace | |
| * (which will retry the fault, or kill us if we got oom-killed). | |
| */ | |
| up_read(&mm->mmap_sem); | |
| if (!user_mode(regs)) | |
| goto no_context; | |
| pagefault_out_of_memory(); | |
| return; | |
| do_sigbus: | |
| up_read(&mm->mmap_sem); | |
| /* Kernel mode? Handle exceptions or die */ | |
| if (!user_mode(regs)) | |
| goto no_context; | |
| /* | |
| * Send a sigbus, regardless of whether we were in kernel | |
| * or user mode. | |
| */ | |
| #if 0 | |
| printk("do_page_fault() #3: sending SIGBUS to %s for " | |
| "invalid %s\n%0*lx (epc == %0*lx, ra == %0*lx)\n", | |
| tsk->comm, | |
| write ? "write access to" : "read access from", | |
| field, address, | |
| field, (unsigned long) regs->cp0_epc, | |
| field, (unsigned long) regs->regs[31]); | |
| #endif | |
| current->thread.trap_nr = (regs->cp0_cause >> 2) & 0x1f; | |
| tsk->thread.cp0_badvaddr = address; | |
| info.si_signo = SIGBUS; | |
| info.si_errno = 0; | |
| info.si_code = BUS_ADRERR; | |
| info.si_addr = (void __user *) address; | |
| force_sig_info(SIGBUS, &info, tsk); | |
| return; | |
| #ifndef CONFIG_64BIT | |
| vmalloc_fault: | |
| { | |
| /* | |
| * Synchronize this task's top level page-table | |
| * with the 'reference' page table. | |
| * | |
| * Do _not_ use "tsk" here. We might be inside | |
| * an interrupt in the middle of a task switch.. | |
| */ | |
| int offset = __pgd_offset(address); | |
| pgd_t *pgd, *pgd_k; | |
| pud_t *pud, *pud_k; | |
| pmd_t *pmd, *pmd_k; | |
| pte_t *pte_k; | |
| pgd = (pgd_t *) pgd_current[raw_smp_processor_id()] + offset; | |
| pgd_k = init_mm.pgd + offset; | |
| if (!pgd_present(*pgd_k)) | |
| goto no_context; | |
| set_pgd(pgd, *pgd_k); | |
| pud = pud_offset(pgd, address); | |
| pud_k = pud_offset(pgd_k, address); | |
| if (!pud_present(*pud_k)) | |
| goto no_context; | |
| pmd = pmd_offset(pud, address); | |
| pmd_k = pmd_offset(pud_k, address); | |
| if (!pmd_present(*pmd_k)) | |
| goto no_context; | |
| set_pmd(pmd, *pmd_k); | |
| pte_k = pte_offset_kernel(pmd_k, address); | |
| if (!pte_present(*pte_k)) | |
| goto no_context; | |
| return; | |
| } | |
| #endif | |
| } | |
| asmlinkage void __kprobes do_page_fault(struct pt_regs *regs, | |
| unsigned long write, unsigned long address) | |
| { | |
| enum ctx_state prev_state; | |
| prev_state = exception_enter(); | |
| __do_page_fault(regs, write, address); | |
| exception_exit(prev_state); | |
| } |