| /* | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| * | |
| * Copyright (C) 1994 Waldorf GMBH | |
| * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2001, 2002, 2003 Ralf Baechle | |
| * Copyright (C) 1996 Paul M. Antoine | |
| * Copyright (C) 1999, 2000 Silicon Graphics, Inc. | |
| */ | |
| #ifndef _ASM_PROCESSOR_H | |
| #define _ASM_PROCESSOR_H | |
| #include <linux/atomic.h> | |
| #include <linux/cpumask.h> | |
| #include <linux/sizes.h> | |
| #include <linux/threads.h> | |
| #include <asm/cachectl.h> | |
| #include <asm/cpu.h> | |
| #include <asm/cpu-info.h> | |
| #include <asm/dsemul.h> | |
| #include <asm/mipsregs.h> | |
| #include <asm/prefetch.h> | |
| /* | |
| * Return current * instruction pointer ("program counter"). | |
| */ | |
| #define current_text_addr() ({ __label__ _l; _l: &&_l;}) | |
| /* | |
| * System setup and hardware flags.. | |
| */ | |
| extern unsigned int vced_count, vcei_count; | |
| /* | |
| * MIPS does have an arch_pick_mmap_layout() | |
| */ | |
| #define HAVE_ARCH_PICK_MMAP_LAYOUT 1 | |
| #ifdef CONFIG_32BIT | |
| #ifdef CONFIG_KVM_GUEST | |
| /* User space process size is limited to 1GB in KVM Guest Mode */ | |
| #define TASK_SIZE 0x3fff8000UL | |
| #else | |
| /* | |
| * User space process size: 2GB. This is hardcoded into a few places, | |
| * so don't change it unless you know what you are doing. | |
| */ | |
| #define TASK_SIZE 0x80000000UL | |
| #endif | |
| #define STACK_TOP_MAX TASK_SIZE | |
| #define TASK_IS_32BIT_ADDR 1 | |
| #endif | |
| #ifdef CONFIG_64BIT | |
| /* | |
| * User space process size: 1TB. This is hardcoded into a few places, | |
| * so don't change it unless you know what you are doing. TASK_SIZE | |
| * is limited to 1TB by the R4000 architecture; R10000 and better can | |
| * support 16TB; the architectural reserve for future expansion is | |
| * 8192EB ... | |
| */ | |
| #define TASK_SIZE32 0x7fff8000UL | |
| #ifdef CONFIG_MIPS_VA_BITS_48 | |
| #define TASK_SIZE64 (0x1UL << ((cpu_data[0].vmbits>48)?48:cpu_data[0].vmbits)) | |
| #else | |
| #define TASK_SIZE64 0x10000000000UL | |
| #endif | |
| #define TASK_SIZE (test_thread_flag(TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE64) | |
| #define STACK_TOP_MAX TASK_SIZE64 | |
| #define TASK_SIZE_OF(tsk) \ | |
| (test_tsk_thread_flag(tsk, TIF_32BIT_ADDR) ? TASK_SIZE32 : TASK_SIZE64) | |
| #define TASK_IS_32BIT_ADDR test_thread_flag(TIF_32BIT_ADDR) | |
| #endif | |
| #define VDSO_RANDOMIZE_SIZE (TASK_IS_32BIT_ADDR ? SZ_1M : SZ_256M) | |
| extern unsigned long mips_stack_top(void); | |
| #define STACK_TOP mips_stack_top() | |
| /* | |
| * This decides where the kernel will search for a free chunk of vm | |
| * space during mmap's. | |
| */ | |
| #define TASK_UNMAPPED_BASE PAGE_ALIGN(TASK_SIZE / 3) | |
| #define NUM_FPU_REGS 32 | |
| #ifdef CONFIG_CPU_HAS_MSA | |
| # define FPU_REG_WIDTH 128 | |
| #else | |
| # define FPU_REG_WIDTH 64 | |
| #endif | |
| union fpureg { | |
| __u32 val32[FPU_REG_WIDTH / 32]; | |
| __u64 val64[FPU_REG_WIDTH / 64]; | |
| }; | |
| #ifdef CONFIG_CPU_LITTLE_ENDIAN | |
| # define FPR_IDX(width, idx) (idx) | |
| #else | |
| # define FPR_IDX(width, idx) ((idx) ^ ((64 / (width)) - 1)) | |
| #endif | |
| #define BUILD_FPR_ACCESS(width) \ | |
| static inline u##width get_fpr##width(union fpureg *fpr, unsigned idx) \ | |
| { \ | |
| return fpr->val##width[FPR_IDX(width, idx)]; \ | |
| } \ | |
| \ | |
| static inline void set_fpr##width(union fpureg *fpr, unsigned idx, \ | |
| u##width val) \ | |
| { \ | |
| fpr->val##width[FPR_IDX(width, idx)] = val; \ | |
| } | |
| BUILD_FPR_ACCESS(32) | |
| BUILD_FPR_ACCESS(64) | |
| /* | |
| * It would be nice to add some more fields for emulator statistics, | |
| * the additional information is private to the FPU emulator for now. | |
| * See arch/mips/include/asm/fpu_emulator.h. | |
| */ | |
| struct mips_fpu_struct { | |
| union fpureg fpr[NUM_FPU_REGS]; | |
| unsigned int fcr31; | |
| unsigned int msacsr; | |
| }; | |
| #define NUM_DSP_REGS 6 | |
| typedef unsigned long dspreg_t; | |
| struct mips_dsp_state { | |
| dspreg_t dspr[NUM_DSP_REGS]; | |
| unsigned int dspcontrol; | |
| }; | |
| #define INIT_CPUMASK { \ | |
| {0,} \ | |
| } | |
| struct mips3264_watch_reg_state { | |
| /* The width of watchlo is 32 in a 32 bit kernel and 64 in a | |
| 64 bit kernel. We use unsigned long as it has the same | |
| property. */ | |
| unsigned long watchlo[NUM_WATCH_REGS]; | |
| /* Only the mask and IRW bits from watchhi. */ | |
| u16 watchhi[NUM_WATCH_REGS]; | |
| }; | |
| union mips_watch_reg_state { | |
| struct mips3264_watch_reg_state mips3264; | |
| }; | |
| #if defined(CONFIG_CPU_CAVIUM_OCTEON) | |
| struct octeon_cop2_state { | |
| /* DMFC2 rt, 0x0201 */ | |
| unsigned long cop2_crc_iv; | |
| /* DMFC2 rt, 0x0202 (Set with DMTC2 rt, 0x1202) */ | |
| unsigned long cop2_crc_length; | |
| /* DMFC2 rt, 0x0200 (set with DMTC2 rt, 0x4200) */ | |
| unsigned long cop2_crc_poly; | |
| /* DMFC2 rt, 0x0402; DMFC2 rt, 0x040A */ | |
| unsigned long cop2_llm_dat[2]; | |
| /* DMFC2 rt, 0x0084 */ | |
| unsigned long cop2_3des_iv; | |
| /* DMFC2 rt, 0x0080; DMFC2 rt, 0x0081; DMFC2 rt, 0x0082 */ | |
| unsigned long cop2_3des_key[3]; | |
| /* DMFC2 rt, 0x0088 (Set with DMTC2 rt, 0x0098) */ | |
| unsigned long cop2_3des_result; | |
| /* DMFC2 rt, 0x0111 (FIXME: Read Pass1 Errata) */ | |
| unsigned long cop2_aes_inp0; | |
| /* DMFC2 rt, 0x0102; DMFC2 rt, 0x0103 */ | |
| unsigned long cop2_aes_iv[2]; | |
| /* DMFC2 rt, 0x0104; DMFC2 rt, 0x0105; DMFC2 rt, 0x0106; DMFC2 | |
| * rt, 0x0107 */ | |
| unsigned long cop2_aes_key[4]; | |
| /* DMFC2 rt, 0x0110 */ | |
| unsigned long cop2_aes_keylen; | |
| /* DMFC2 rt, 0x0100; DMFC2 rt, 0x0101 */ | |
| unsigned long cop2_aes_result[2]; | |
| /* DMFC2 rt, 0x0240; DMFC2 rt, 0x0241; DMFC2 rt, 0x0242; DMFC2 | |
| * rt, 0x0243; DMFC2 rt, 0x0244; DMFC2 rt, 0x0245; DMFC2 rt, | |
| * 0x0246; DMFC2 rt, 0x0247; DMFC2 rt, 0x0248; DMFC2 rt, | |
| * 0x0249; DMFC2 rt, 0x024A; DMFC2 rt, 0x024B; DMFC2 rt, | |
| * 0x024C; DMFC2 rt, 0x024D; DMFC2 rt, 0x024E - Pass2 */ | |
| unsigned long cop2_hsh_datw[15]; | |
| /* DMFC2 rt, 0x0250; DMFC2 rt, 0x0251; DMFC2 rt, 0x0252; DMFC2 | |
| * rt, 0x0253; DMFC2 rt, 0x0254; DMFC2 rt, 0x0255; DMFC2 rt, | |
| * 0x0256; DMFC2 rt, 0x0257 - Pass2 */ | |
| unsigned long cop2_hsh_ivw[8]; | |
| /* DMFC2 rt, 0x0258; DMFC2 rt, 0x0259 - Pass2 */ | |
| unsigned long cop2_gfm_mult[2]; | |
| /* DMFC2 rt, 0x025E - Pass2 */ | |
| unsigned long cop2_gfm_poly; | |
| /* DMFC2 rt, 0x025A; DMFC2 rt, 0x025B - Pass2 */ | |
| unsigned long cop2_gfm_result[2]; | |
| /* DMFC2 rt, 0x24F, DMFC2 rt, 0x50, OCTEON III */ | |
| unsigned long cop2_sha3[2]; | |
| }; | |
| #define COP2_INIT \ | |
| .cp2 = {0,}, | |
| struct octeon_cvmseg_state { | |
| unsigned long cvmseg[CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE] | |
| [cpu_dcache_line_size() / sizeof(unsigned long)]; | |
| }; | |
| #elif defined(CONFIG_CPU_XLP) | |
| struct nlm_cop2_state { | |
| u64 rx[4]; | |
| u64 tx[4]; | |
| u32 tx_msg_status; | |
| u32 rx_msg_status; | |
| }; | |
| #define COP2_INIT \ | |
| .cp2 = {{0}, {0}, 0, 0}, | |
| #else | |
| #define COP2_INIT | |
| #endif | |
| typedef struct { | |
| unsigned long seg; | |
| } mm_segment_t; | |
| #ifdef CONFIG_CPU_HAS_MSA | |
| # define ARCH_MIN_TASKALIGN 16 | |
| # define FPU_ALIGN __aligned(16) | |
| #else | |
| # define ARCH_MIN_TASKALIGN 8 | |
| # define FPU_ALIGN | |
| #endif | |
| struct mips_abi; | |
| /* | |
| * If you change thread_struct remember to change the #defines below too! | |
| */ | |
| struct thread_struct { | |
| /* Saved main processor registers. */ | |
| unsigned long reg16; | |
| unsigned long reg17, reg18, reg19, reg20, reg21, reg22, reg23; | |
| unsigned long reg29, reg30, reg31; | |
| /* Saved cp0 stuff. */ | |
| unsigned long cp0_status; | |
| /* Saved fpu/fpu emulator stuff. */ | |
| struct mips_fpu_struct fpu FPU_ALIGN; | |
| /* Assigned branch delay slot 'emulation' frame */ | |
| atomic_t bd_emu_frame; | |
| /* PC of the branch from a branch delay slot 'emulation' */ | |
| unsigned long bd_emu_branch_pc; | |
| /* PC to continue from following a branch delay slot 'emulation' */ | |
| unsigned long bd_emu_cont_pc; | |
| #ifdef CONFIG_MIPS_MT_FPAFF | |
| /* Emulated instruction count */ | |
| unsigned long emulated_fp; | |
| /* Saved per-thread scheduler affinity mask */ | |
| cpumask_t user_cpus_allowed; | |
| #endif /* CONFIG_MIPS_MT_FPAFF */ | |
| /* Saved state of the DSP ASE, if available. */ | |
| struct mips_dsp_state dsp; | |
| /* Saved watch register state, if available. */ | |
| union mips_watch_reg_state watch; | |
| /* Other stuff associated with the thread. */ | |
| unsigned long cp0_badvaddr; /* Last user fault */ | |
| unsigned long cp0_baduaddr; /* Last kernel fault accessing USEG */ | |
| unsigned long error_code; | |
| unsigned long trap_nr; | |
| #ifdef CONFIG_CPU_CAVIUM_OCTEON | |
| struct octeon_cop2_state cp2 __attribute__ ((__aligned__(128))); | |
| struct octeon_cvmseg_state cvmseg __attribute__ ((__aligned__(128))); | |
| #endif | |
| #ifdef CONFIG_CPU_XLP | |
| struct nlm_cop2_state cp2; | |
| #endif | |
| struct mips_abi *abi; | |
| }; | |
| #ifdef CONFIG_MIPS_MT_FPAFF | |
| #define FPAFF_INIT \ | |
| .emulated_fp = 0, \ | |
| .user_cpus_allowed = INIT_CPUMASK, | |
| #else | |
| #define FPAFF_INIT | |
| #endif /* CONFIG_MIPS_MT_FPAFF */ | |
| #define INIT_THREAD { \ | |
| /* \ | |
| * Saved main processor registers \ | |
| */ \ | |
| .reg16 = 0, \ | |
| .reg17 = 0, \ | |
| .reg18 = 0, \ | |
| .reg19 = 0, \ | |
| .reg20 = 0, \ | |
| .reg21 = 0, \ | |
| .reg22 = 0, \ | |
| .reg23 = 0, \ | |
| .reg29 = 0, \ | |
| .reg30 = 0, \ | |
| .reg31 = 0, \ | |
| /* \ | |
| * Saved cp0 stuff \ | |
| */ \ | |
| .cp0_status = 0, \ | |
| /* \ | |
| * Saved FPU/FPU emulator stuff \ | |
| */ \ | |
| .fpu = { \ | |
| .fpr = {{{0,},},}, \ | |
| .fcr31 = 0, \ | |
| .msacsr = 0, \ | |
| }, \ | |
| /* \ | |
| * FPU affinity state (null if not FPAFF) \ | |
| */ \ | |
| FPAFF_INIT \ | |
| /* Delay slot emulation */ \ | |
| .bd_emu_frame = ATOMIC_INIT(BD_EMUFRAME_NONE), \ | |
| .bd_emu_branch_pc = 0, \ | |
| .bd_emu_cont_pc = 0, \ | |
| /* \ | |
| * Saved DSP stuff \ | |
| */ \ | |
| .dsp = { \ | |
| .dspr = {0, }, \ | |
| .dspcontrol = 0, \ | |
| }, \ | |
| /* \ | |
| * saved watch register stuff \ | |
| */ \ | |
| .watch = {{{0,},},}, \ | |
| /* \ | |
| * Other stuff associated with the process \ | |
| */ \ | |
| .cp0_badvaddr = 0, \ | |
| .cp0_baduaddr = 0, \ | |
| .error_code = 0, \ | |
| .trap_nr = 0, \ | |
| /* \ | |
| * Platform specific cop2 registers(null if no COP2) \ | |
| */ \ | |
| COP2_INIT \ | |
| } | |
| struct task_struct; | |
| /* Free all resources held by a thread. */ | |
| #define release_thread(thread) do { } while(0) | |
| extern unsigned long thread_saved_pc(struct task_struct *tsk); | |
| /* | |
| * Do necessary setup to start up a newly executed thread. | |
| */ | |
| extern void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp); | |
| static inline void flush_thread(void) | |
| { | |
| } | |
| unsigned long get_wchan(struct task_struct *p); | |
| #define __KSTK_TOS(tsk) ((unsigned long)task_stack_page(tsk) + \ | |
| THREAD_SIZE - 32 - sizeof(struct pt_regs)) | |
| #define task_pt_regs(tsk) ((struct pt_regs *)__KSTK_TOS(tsk)) | |
| #define KSTK_EIP(tsk) (task_pt_regs(tsk)->cp0_epc) | |
| #define KSTK_ESP(tsk) (task_pt_regs(tsk)->regs[29]) | |
| #define KSTK_STATUS(tsk) (task_pt_regs(tsk)->cp0_status) | |
| #ifdef CONFIG_CPU_LOONGSON3 | |
| /* | |
| * Loongson-3's SFB (Store-Fill-Buffer) may buffer writes indefinitely when a | |
| * tight read loop is executed, because reads take priority over writes & the | |
| * hardware (incorrectly) doesn't ensure that writes will eventually occur. | |
| * | |
| * Since spin loops of any kind should have a cpu_relax() in them, force an SFB | |
| * flush from cpu_relax() such that any pending writes will become visible as | |
| * expected. | |
| */ | |
| #define cpu_relax() smp_mb() | |
| #else | |
| #define cpu_relax() barrier() | |
| #endif | |
| /* | |
| * Return_address is a replacement for __builtin_return_address(count) | |
| * which on certain architectures cannot reasonably be implemented in GCC | |
| * (MIPS, Alpha) or is unusable with -fomit-frame-pointer (i386). | |
| * Note that __builtin_return_address(x>=1) is forbidden because GCC | |
| * aborts compilation on some CPUs. It's simply not possible to unwind | |
| * some CPU's stackframes. | |
| * | |
| * __builtin_return_address works only for non-leaf functions. We avoid the | |
| * overhead of a function call by forcing the compiler to save the return | |
| * address register on the stack. | |
| */ | |
| #define return_address() ({__asm__ __volatile__("":::"$31");__builtin_return_address(0);}) | |
| #ifdef CONFIG_CPU_HAS_PREFETCH | |
| #define ARCH_HAS_PREFETCH | |
| #define prefetch(x) __builtin_prefetch((x), 0, 1) | |
| #define ARCH_HAS_PREFETCHW | |
| #define prefetchw(x) __builtin_prefetch((x), 1, 1) | |
| #endif | |
| /* | |
| * Functions & macros implementing the PR_GET_FP_MODE & PR_SET_FP_MODE options | |
| * to the prctl syscall. | |
| */ | |
| extern int mips_get_process_fp_mode(struct task_struct *task); | |
| extern int mips_set_process_fp_mode(struct task_struct *task, | |
| unsigned int value); | |
| #define GET_FP_MODE(task) mips_get_process_fp_mode(task) | |
| #define SET_FP_MODE(task,value) mips_set_process_fp_mode(task, value) | |
| #endif /* _ASM_PROCESSOR_H */ |