| Maxim MAX8660 voltage regulator | |
| Required properties: | |
| - compatible: must be one of "maxim,max8660", "maxim,max8661" | |
| - reg: I2C slave address, usually 0x34 | |
| - any required generic properties defined in regulator.txt | |
| Example: | |
| i2c_master { | |
| max8660@34 { | |
| compatible = "maxim,max8660"; | |
| reg = <0x34>; | |
| regulators { | |
| regulator@0 { | |
| regulator-compatible= "V3(DCDC)"; | |
| regulator-min-microvolt = <725000>; | |
| regulator-max-microvolt = <1800000>; | |
| }; | |
| regulator@1 { | |
| regulator-compatible= "V4(DCDC)"; | |
| regulator-min-microvolt = <725000>; | |
| regulator-max-microvolt = <1800000>; | |
| }; | |
| regulator@2 { | |
| regulator-compatible= "V5(LDO)"; | |
| regulator-min-microvolt = <1700000>; | |
| regulator-max-microvolt = <2000000>; | |
| }; | |
| regulator@3 { | |
| regulator-compatible= "V6(LDO)"; | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <3300000>; | |
| }; | |
| regulator@4 { | |
| regulator-compatible= "V7(LDO)"; | |
| regulator-min-microvolt = <1800000>; | |
| regulator-max-microvolt = <3300000>; | |
| }; | |
| }; | |
| }; | |
| }; |