| /* |
| * drivers/mtd/nand/at91_nand.c |
| * |
| * Copyright (C) 2003 Rick Bronson |
| * |
| * Derived from drivers/mtd/nand/autcpu12.c |
| * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de) |
| * |
| * Derived from drivers/mtd/spia.c |
| * Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/nand.h> |
| #include <linux/mtd/partitions.h> |
| |
| #include <asm/io.h> |
| #include <asm/sizes.h> |
| |
| #include <asm/hardware.h> |
| #include <asm/arch/board.h> |
| #include <asm/arch/gpio.h> |
| |
| struct at91_nand_host { |
| struct nand_chip nand_chip; |
| struct mtd_info mtd; |
| void __iomem *io_base; |
| struct at91_nand_data *board; |
| }; |
| |
| /* |
| * Hardware specific access to control-lines |
| */ |
| static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) |
| { |
| struct nand_chip *nand_chip = mtd->priv; |
| struct at91_nand_host *host = nand_chip->priv; |
| |
| if (cmd == NAND_CMD_NONE) |
| return; |
| |
| if (ctrl & NAND_CLE) |
| writeb(cmd, host->io_base + (1 << host->board->cle)); |
| else |
| writeb(cmd, host->io_base + (1 << host->board->ale)); |
| } |
| |
| /* |
| * Read the Device Ready pin. |
| */ |
| static int at91_nand_device_ready(struct mtd_info *mtd) |
| { |
| struct nand_chip *nand_chip = mtd->priv; |
| struct at91_nand_host *host = nand_chip->priv; |
| |
| return at91_get_gpio_value(host->board->rdy_pin); |
| } |
| |
| /* |
| * Enable NAND. |
| */ |
| static void at91_nand_enable(struct at91_nand_host *host) |
| { |
| if (host->board->enable_pin) |
| at91_set_gpio_value(host->board->enable_pin, 0); |
| } |
| |
| /* |
| * Disable NAND. |
| */ |
| static void at91_nand_disable(struct at91_nand_host *host) |
| { |
| if (host->board->enable_pin) |
| at91_set_gpio_value(host->board->enable_pin, 1); |
| } |
| |
| #ifdef CONFIG_MTD_PARTITIONS |
| const char *part_probes[] = { "cmdlinepart", NULL }; |
| #endif |
| |
| /* |
| * Probe for the NAND device. |
| */ |
| static int __init at91_nand_probe(struct platform_device *pdev) |
| { |
| struct at91_nand_host *host; |
| struct mtd_info *mtd; |
| struct nand_chip *nand_chip; |
| int res; |
| |
| #ifdef CONFIG_MTD_PARTITIONS |
| struct mtd_partition *partitions = NULL; |
| int num_partitions = 0; |
| #endif |
| |
| /* Allocate memory for the device structure (and zero it) */ |
| host = kzalloc(sizeof(struct at91_nand_host), GFP_KERNEL); |
| if (!host) { |
| printk(KERN_ERR "at91_nand: failed to allocate device structure.\n"); |
| return -ENOMEM; |
| } |
| |
| host->io_base = ioremap(pdev->resource[0].start, |
| pdev->resource[0].end - pdev->resource[0].start + 1); |
| if (host->io_base == NULL) { |
| printk(KERN_ERR "at91_nand: ioremap failed\n"); |
| kfree(host); |
| return -EIO; |
| } |
| |
| mtd = &host->mtd; |
| nand_chip = &host->nand_chip; |
| host->board = pdev->dev.platform_data; |
| |
| nand_chip->priv = host; /* link the private data structures */ |
| mtd->priv = nand_chip; |
| mtd->owner = THIS_MODULE; |
| |
| /* Set address of NAND IO lines */ |
| nand_chip->IO_ADDR_R = host->io_base; |
| nand_chip->IO_ADDR_W = host->io_base; |
| nand_chip->cmd_ctrl = at91_nand_cmd_ctrl; |
| |
| if (host->board->rdy_pin) |
| nand_chip->dev_ready = at91_nand_device_ready; |
| |
| nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */ |
| nand_chip->chip_delay = 20; /* 20us command delay time */ |
| |
| if (host->board->bus_width_16) /* 16-bit bus width */ |
| nand_chip->options |= NAND_BUSWIDTH_16; |
| |
| platform_set_drvdata(pdev, host); |
| at91_nand_enable(host); |
| |
| if (host->board->det_pin) { |
| if (at91_get_gpio_value(host->board->det_pin)) { |
| printk ("No SmartMedia card inserted.\n"); |
| res = ENXIO; |
| goto out; |
| } |
| } |
| |
| /* Scan to find existance of the device */ |
| if (nand_scan(mtd, 1)) { |
| res = -ENXIO; |
| goto out; |
| } |
| |
| #ifdef CONFIG_MTD_PARTITIONS |
| #ifdef CONFIG_MTD_CMDLINE_PARTS |
| mtd->name = "at91_nand"; |
| num_partitions = parse_mtd_partitions(mtd, part_probes, |
| &partitions, 0); |
| #endif |
| if (num_partitions <= 0 && host->board->partition_info) |
| partitions = host->board->partition_info(mtd->size, |
| &num_partitions); |
| |
| if ((!partitions) || (num_partitions == 0)) { |
| printk(KERN_ERR "at91_nand: No parititions defined, or unsupported device.\n"); |
| res = ENXIO; |
| goto release; |
| } |
| |
| res = add_mtd_partitions(mtd, partitions, num_partitions); |
| #else |
| res = add_mtd_device(mtd); |
| #endif |
| |
| if (!res) |
| return res; |
| |
| release: |
| nand_release(mtd); |
| out: |
| at91_nand_disable(host); |
| platform_set_drvdata(pdev, NULL); |
| iounmap(host->io_base); |
| kfree(host); |
| return res; |
| } |
| |
| /* |
| * Remove a NAND device. |
| */ |
| static int __devexit at91_nand_remove(struct platform_device *pdev) |
| { |
| struct at91_nand_host *host = platform_get_drvdata(pdev); |
| struct mtd_info *mtd = &host->mtd; |
| |
| nand_release(mtd); |
| |
| at91_nand_disable(host); |
| |
| iounmap(host->io_base); |
| kfree(host); |
| |
| return 0; |
| } |
| |
| static struct platform_driver at91_nand_driver = { |
| .probe = at91_nand_probe, |
| .remove = at91_nand_remove, |
| .driver = { |
| .name = "at91_nand", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init at91_nand_init(void) |
| { |
| return platform_driver_register(&at91_nand_driver); |
| } |
| |
| |
| static void __exit at91_nand_exit(void) |
| { |
| platform_driver_unregister(&at91_nand_driver); |
| } |
| |
| |
| module_init(at91_nand_init); |
| module_exit(at91_nand_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Rick Bronson"); |
| MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200"); |