| # SPDX-License-Identifier: GPL-2.0-or-later | |
| # Global variables initialized in main() and then used during cleanup() when | |
| # the script exits. | |
| declare DEVICE_BDF | |
| declare NEW_DRIVER | |
| declare OLD_DRIVER | |
| declare OLD_NUMVFS | |
| declare DRIVER_OVERRIDE | |
| function write_to() { | |
| # Unfortunately set -x does not show redirects so use echo to manually | |
| # tell the user what commands are being run. | |
| echo "+ echo \"${2}\" > ${1}" | |
| echo "${2}" > ${1} | |
| } | |
| function bind() { | |
| write_to /sys/bus/pci/drivers/${2}/bind ${1} | |
| } | |
| function unbind() { | |
| write_to /sys/bus/pci/drivers/${2}/unbind ${1} | |
| } | |
| function set_sriov_numvfs() { | |
| write_to /sys/bus/pci/devices/${1}/sriov_numvfs ${2} | |
| } | |
| function set_driver_override() { | |
| write_to /sys/bus/pci/devices/${1}/driver_override ${2} | |
| } | |
| function clear_driver_override() { | |
| set_driver_override ${1} "" | |
| } | |
| function cleanup() { | |
| if [ "${NEW_DRIVER}" ]; then unbind ${DEVICE_BDF} ${NEW_DRIVER} ; fi | |
| if [ "${DRIVER_OVERRIDE}" ]; then clear_driver_override ${DEVICE_BDF} ; fi | |
| if [ "${OLD_DRIVER}" ]; then bind ${DEVICE_BDF} ${OLD_DRIVER} ; fi | |
| if [ "${OLD_NUMVFS}" ]; then set_sriov_numvfs ${DEVICE_BDF} ${OLD_NUMVFS} ; fi | |
| } | |
| function usage() { | |
| echo "usage: $0 [-d segment:bus:device.function] [-s] [-h] [cmd ...]" >&2 | |
| echo >&2 | |
| echo " -d: The BDF of the device to use for the test (required)" >&2 | |
| echo " -h: Show this help message" >&2 | |
| echo " -s: Drop into a shell rather than running a command" >&2 | |
| echo >&2 | |
| echo " cmd: The command to run and arguments to pass to it." >&2 | |
| echo " Required when not using -s. The SBDF will be " >&2 | |
| echo " appended to the argument list." >&2 | |
| exit 1 | |
| } | |
| function main() { | |
| local shell | |
| while getopts "d:hs" opt; do | |
| case $opt in | |
| d) DEVICE_BDF="$OPTARG" ;; | |
| s) shell=true ;; | |
| *) usage ;; | |
| esac | |
| done | |
| # Shift past all optional arguments. | |
| shift $((OPTIND - 1)) | |
| # Check that the user passed in the command to run. | |
| [ ! "${shell}" ] && [ $# = 0 ] && usage | |
| # Check that the user passed in a BDF. | |
| [ "${DEVICE_BDF}" ] || usage | |
| trap cleanup EXIT | |
| set -e | |
| test -d /sys/bus/pci/devices/${DEVICE_BDF} | |
| if [ -f /sys/bus/pci/devices/${DEVICE_BDF}/sriov_numvfs ]; then | |
| OLD_NUMVFS=$(cat /sys/bus/pci/devices/${DEVICE_BDF}/sriov_numvfs) | |
| set_sriov_numvfs ${DEVICE_BDF} 0 | |
| fi | |
| if [ -L /sys/bus/pci/devices/${DEVICE_BDF}/driver ]; then | |
| OLD_DRIVER=$(basename $(readlink -m /sys/bus/pci/devices/${DEVICE_BDF}/driver)) | |
| unbind ${DEVICE_BDF} ${OLD_DRIVER} | |
| fi | |
| set_driver_override ${DEVICE_BDF} vfio-pci | |
| DRIVER_OVERRIDE=true | |
| bind ${DEVICE_BDF} vfio-pci | |
| NEW_DRIVER=vfio-pci | |
| echo | |
| if [ "${shell}" ]; then | |
| echo "Dropping into ${SHELL} with VFIO_SELFTESTS_BDF=${DEVICE_BDF}" | |
| VFIO_SELFTESTS_BDF=${DEVICE_BDF} ${SHELL} | |
| else | |
| "$@" ${DEVICE_BDF} | |
| fi | |
| echo | |
| } | |
| main "$@" |