| # SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/interrupt-controller/aspeed,ast2700-intc.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Aspeed AST2700 Interrupt Controller | |
| description: | |
| This interrupt controller hardware is second level interrupt controller that | |
| is hooked to a parent interrupt controller. It's useful to combine multiple | |
| interrupt sources into 1 interrupt to parent interrupt controller. | |
| maintainers: | |
| - Kevin Chen <kevin_chen@aspeedtech.com> | |
| properties: | |
| compatible: | |
| enum: | |
| - aspeed,ast2700-intc-ic | |
| reg: | |
| maxItems: 1 | |
| interrupt-controller: true | |
| '#interrupt-cells': | |
| const: 2 | |
| description: | |
| The first cell is the IRQ number, the second cell is the trigger | |
| type as defined in interrupt.txt in this directory. | |
| interrupts: | |
| maxItems: 6 | |
| description: | | |
| Depend to which INTC0 or INTC1 used. | |
| INTC0 and INTC1 are two kinds of interrupt controller with enable and raw | |
| status registers for use. | |
| INTC0 is used to assert GIC if interrupt in INTC1 asserted. | |
| INTC1 is used to assert INTC0 if interrupt of modules asserted. | |
| +-----+ +-------+ +---------+---module0 | |
| | GIC |---| INTC0 |--+--| INTC1_0 |---module2 | |
| | | | | | | |---... | |
| +-----+ +-------+ | +---------+---module31 | |
| | | |
| | +---------+---module0 | |
| +---| INTC1_1 |---module2 | |
| | | |---... | |
| | +---------+---module31 | |
| ... | |
| | +---------+---module0 | |
| +---| INTC1_5 |---module2 | |
| | |---... | |
| +---------+---module31 | |
| required: | |
| - compatible | |
| - reg | |
| - interrupt-controller | |
| - '#interrupt-cells' | |
| - interrupts | |
| additionalProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> | |
| bus { | |
| #address-cells = <2>; | |
| #size-cells = <2>; | |
| interrupt-controller@12101b00 { | |
| compatible = "aspeed,ast2700-intc-ic"; | |
| reg = <0 0x12101b00 0 0x10>; | |
| #interrupt-cells = <2>; | |
| interrupt-controller; | |
| interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, | |
| <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, | |
| <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, | |
| <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, | |
| <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, | |
| <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>; | |
| }; | |
| }; |