| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) | |
| %YAML 1.2 | |
| --- | |
| $id: http://devicetree.org/schemas/input/touchscreen/semtech,sx8654.yaml# | |
| $schema: http://devicetree.org/meta-schemas/core.yaml# | |
| title: Semtech SX8654 I2C Touchscreen Controller | |
| maintainers: | |
| - Frank Li <Frank.Li@nxp.com> | |
| properties: | |
| compatible: | |
| enum: | |
| - semtech,sx8650 | |
| - semtech,sx8654 | |
| - semtech,sx8655 | |
| - semtech,sx8656 | |
| reg: | |
| maxItems: 1 | |
| interrupts: | |
| maxItems: 1 | |
| reset-gpios: | |
| maxItems: 1 | |
| required: | |
| - compatible | |
| - reg | |
| - interrupts | |
| additionalProperties: false | |
| examples: | |
| - | | |
| #include <dt-bindings/gpio/gpio.h> | |
| #include <dt-bindings/interrupt-controller/irq.h> | |
| i2c { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| touchscreen@48 { | |
| compatible = "semtech,sx8654"; | |
| reg = <0x48>; | |
| interrupt-parent = <&gpio6>; | |
| interrupts = <3 IRQ_TYPE_EDGE_FALLING>; | |
| reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>; | |
| }; | |
| }; |