| /* | |
| * Helpers for the host side of a virtio ring. | |
| * | |
| * Since these may be in userspace, we use (inline) accessors. | |
| */ | |
| #include <linux/compiler.h> | |
| #include <linux/module.h> | |
| #include <linux/vringh.h> | |
| #include <linux/virtio_ring.h> | |
| #include <linux/kernel.h> | |
| #include <linux/ratelimit.h> | |
| #include <linux/uaccess.h> | |
| #include <linux/slab.h> | |
| #include <linux/export.h> | |
| #include <uapi/linux/virtio_config.h> | |
| static __printf(1,2) __cold void vringh_bad(const char *fmt, ...) | |
| { | |
| static DEFINE_RATELIMIT_STATE(vringh_rs, | |
| DEFAULT_RATELIMIT_INTERVAL, | |
| DEFAULT_RATELIMIT_BURST); | |
| if (__ratelimit(&vringh_rs)) { | |
| va_list ap; | |
| va_start(ap, fmt); | |
| printk(KERN_NOTICE "vringh:"); | |
| vprintk(fmt, ap); | |
| va_end(ap); | |
| } | |
| } | |
| /* Returns vring->num if empty, -ve on error. */ | |
| static inline int __vringh_get_head(const struct vringh *vrh, | |
| int (*getu16)(const struct vringh *vrh, | |
| u16 *val, const __virtio16 *p), | |
| u16 *last_avail_idx) | |
| { | |
| u16 avail_idx, i, head; | |
| int err; | |
| err = getu16(vrh, &avail_idx, &vrh->vring.avail->idx); | |
| if (err) { | |
| vringh_bad("Failed to access avail idx at %p", | |
| &vrh->vring.avail->idx); | |
| return err; | |
| } | |
| if (*last_avail_idx == avail_idx) | |
| return vrh->vring.num; | |
| /* Only get avail ring entries after they have been exposed by guest. */ | |
| virtio_rmb(vrh->weak_barriers); | |
| i = *last_avail_idx & (vrh->vring.num - 1); | |
| err = getu16(vrh, &head, &vrh->vring.avail->ring[i]); | |
| if (err) { | |
| vringh_bad("Failed to read head: idx %d address %p", | |
| *last_avail_idx, &vrh->vring.avail->ring[i]); | |
| return err; | |
| } | |
| if (head >= vrh->vring.num) { | |
| vringh_bad("Guest says index %u > %u is available", | |
| head, vrh->vring.num); | |
| return -EINVAL; | |
| } | |
| (*last_avail_idx)++; | |
| return head; | |
| } | |
| /* Copy some bytes to/from the iovec. Returns num copied. */ | |
| static inline ssize_t vringh_iov_xfer(struct vringh_kiov *iov, | |
| void *ptr, size_t len, | |
| int (*xfer)(void *addr, void *ptr, | |
| size_t len)) | |
| { | |
| int err, done = 0; | |
| while (len && iov->i < iov->used) { | |
| size_t partlen; | |
| partlen = min(iov->iov[iov->i].iov_len, len); | |
| err = xfer(iov->iov[iov->i].iov_base, ptr, partlen); | |
| if (err) | |
| return err; | |
| done += partlen; | |
| len -= partlen; | |
| ptr += partlen; | |
| iov->consumed += partlen; | |
| iov->iov[iov->i].iov_len -= partlen; | |
| iov->iov[iov->i].iov_base += partlen; | |
| if (!iov->iov[iov->i].iov_len) { | |
| /* Fix up old iov element then increment. */ | |
| iov->iov[iov->i].iov_len = iov->consumed; | |
| iov->iov[iov->i].iov_base -= iov->consumed; | |
| iov->consumed = 0; | |
| iov->i++; | |
| } | |
| } | |
| return done; | |
| } | |
| /* May reduce *len if range is shorter. */ | |
| static inline bool range_check(struct vringh *vrh, u64 addr, size_t *len, | |
| struct vringh_range *range, | |
| bool (*getrange)(struct vringh *, | |
| u64, struct vringh_range *)) | |
| { | |
| if (addr < range->start || addr > range->end_incl) { | |
| if (!getrange(vrh, addr, range)) | |
| return false; | |
| } | |
| BUG_ON(addr < range->start || addr > range->end_incl); | |
| /* To end of memory? */ | |
| if (unlikely(addr + *len == 0)) { | |
| if (range->end_incl == -1ULL) | |
| return true; | |
| goto truncate; | |
| } | |
| /* Otherwise, don't wrap. */ | |
| if (addr + *len < addr) { | |
| vringh_bad("Wrapping descriptor %zu@0x%llx", | |
| *len, (unsigned long long)addr); | |
| return false; | |
| } | |
| if (unlikely(addr + *len - 1 > range->end_incl)) | |
| goto truncate; | |
| return true; | |
| truncate: | |
| *len = range->end_incl + 1 - addr; | |
| return true; | |
| } | |
| static inline bool no_range_check(struct vringh *vrh, u64 addr, size_t *len, | |
| struct vringh_range *range, | |
| bool (*getrange)(struct vringh *, | |
| u64, struct vringh_range *)) | |
| { | |
| return true; | |
| } | |
| /* No reason for this code to be inline. */ | |
| static int move_to_indirect(const struct vringh *vrh, | |
| int *up_next, u16 *i, void *addr, | |
| const struct vring_desc *desc, | |
| struct vring_desc **descs, int *desc_max) | |
| { | |
| u32 len; | |
| /* Indirect tables can't have indirect. */ | |
| if (*up_next != -1) { | |
| vringh_bad("Multilevel indirect %u->%u", *up_next, *i); | |
| return -EINVAL; | |
| } | |
| len = vringh32_to_cpu(vrh, desc->len); | |
| if (unlikely(len % sizeof(struct vring_desc))) { | |
| vringh_bad("Strange indirect len %u", desc->len); | |
| return -EINVAL; | |
| } | |
| /* We will check this when we follow it! */ | |
| if (desc->flags & cpu_to_vringh16(vrh, VRING_DESC_F_NEXT)) | |
| *up_next = vringh16_to_cpu(vrh, desc->next); | |
| else | |
| *up_next = -2; | |
| *descs = addr; | |
| *desc_max = len / sizeof(struct vring_desc); | |
| /* Now, start at the first indirect. */ | |
| *i = 0; | |
| return 0; | |
| } | |
| static int resize_iovec(struct vringh_kiov *iov, gfp_t gfp) | |
| { | |
| struct kvec *new; | |
| unsigned int flag, new_num = (iov->max_num & ~VRINGH_IOV_ALLOCATED) * 2; | |
| if (new_num < 8) | |
| new_num = 8; | |
| flag = (iov->max_num & VRINGH_IOV_ALLOCATED); | |
| if (flag) | |
| new = krealloc(iov->iov, new_num * sizeof(struct iovec), gfp); | |
| else { | |
| new = kmalloc(new_num * sizeof(struct iovec), gfp); | |
| if (new) { | |
| memcpy(new, iov->iov, | |
| iov->max_num * sizeof(struct iovec)); | |
| flag = VRINGH_IOV_ALLOCATED; | |
| } | |
| } | |
| if (!new) | |
| return -ENOMEM; | |
| iov->iov = new; | |
| iov->max_num = (new_num | flag); | |
| return 0; | |
| } | |
| static u16 __cold return_from_indirect(const struct vringh *vrh, int *up_next, | |
| struct vring_desc **descs, int *desc_max) | |
| { | |
| u16 i = *up_next; | |
| *up_next = -1; | |
| *descs = vrh->vring.desc; | |
| *desc_max = vrh->vring.num; | |
| return i; | |
| } | |
| static int slow_copy(struct vringh *vrh, void *dst, const void *src, | |
| bool (*rcheck)(struct vringh *vrh, u64 addr, size_t *len, | |
| struct vringh_range *range, | |
| bool (*getrange)(struct vringh *vrh, | |
| u64, | |
| struct vringh_range *)), | |
| bool (*getrange)(struct vringh *vrh, | |
| u64 addr, | |
| struct vringh_range *r), | |
| struct vringh_range *range, | |
| int (*copy)(void *dst, const void *src, size_t len)) | |
| { | |
| size_t part, len = sizeof(struct vring_desc); | |
| do { | |
| u64 addr; | |
| int err; | |
| part = len; | |
| addr = (u64)(unsigned long)src - range->offset; | |
| if (!rcheck(vrh, addr, &part, range, getrange)) | |
| return -EINVAL; | |
| err = copy(dst, src, part); | |
| if (err) | |
| return err; | |
| dst += part; | |
| src += part; | |
| len -= part; | |
| } while (len); | |
| return 0; | |
| } | |
| static inline int | |
| __vringh_iov(struct vringh *vrh, u16 i, | |
| struct vringh_kiov *riov, | |
| struct vringh_kiov *wiov, | |
| bool (*rcheck)(struct vringh *vrh, u64 addr, size_t *len, | |
| struct vringh_range *range, | |
| bool (*getrange)(struct vringh *, u64, | |
| struct vringh_range *)), | |
| bool (*getrange)(struct vringh *, u64, struct vringh_range *), | |
| gfp_t gfp, | |
| int (*copy)(void *dst, const void *src, size_t len)) | |
| { | |
| int err, count = 0, up_next, desc_max; | |
| struct vring_desc desc, *descs; | |
| struct vringh_range range = { -1ULL, 0 }, slowrange; | |
| bool slow = false; | |
| /* We start traversing vring's descriptor table. */ | |
| descs = vrh->vring.desc; | |
| desc_max = vrh->vring.num; | |
| up_next = -1; | |
| if (riov) | |
| riov->i = riov->used = 0; | |
| else if (wiov) | |
| wiov->i = wiov->used = 0; | |
| else | |
| /* You must want something! */ | |
| BUG(); | |
| for (;;) { | |
| void *addr; | |
| struct vringh_kiov *iov; | |
| size_t len; | |
| if (unlikely(slow)) | |
| err = slow_copy(vrh, &desc, &descs[i], rcheck, getrange, | |
| &slowrange, copy); | |
| else | |
| err = copy(&desc, &descs[i], sizeof(desc)); | |
| if (unlikely(err)) | |
| goto fail; | |
| if (unlikely(desc.flags & | |
| cpu_to_vringh16(vrh, VRING_DESC_F_INDIRECT))) { | |
| u64 a = vringh64_to_cpu(vrh, desc.addr); | |
| /* Make sure it's OK, and get offset. */ | |
| len = vringh32_to_cpu(vrh, desc.len); | |
| if (!rcheck(vrh, a, &len, &range, getrange)) { | |
| err = -EINVAL; | |
| goto fail; | |
| } | |
| if (unlikely(len != vringh32_to_cpu(vrh, desc.len))) { | |
| slow = true; | |
| /* We need to save this range to use offset */ | |
| slowrange = range; | |
| } | |
| addr = (void *)(long)(a + range.offset); | |
| err = move_to_indirect(vrh, &up_next, &i, addr, &desc, | |
| &descs, &desc_max); | |
| if (err) | |
| goto fail; | |
| continue; | |
| } | |
| if (count++ == vrh->vring.num) { | |
| vringh_bad("Descriptor loop in %p", descs); | |
| err = -ELOOP; | |
| goto fail; | |
| } | |
| if (desc.flags & cpu_to_vringh16(vrh, VRING_DESC_F_WRITE)) | |
| iov = wiov; | |
| else { | |
| iov = riov; | |
| if (unlikely(wiov && wiov->i)) { | |
| vringh_bad("Readable desc %p after writable", | |
| &descs[i]); | |
| err = -EINVAL; | |
| goto fail; | |
| } | |
| } | |
| if (!iov) { | |
| vringh_bad("Unexpected %s desc", | |
| !wiov ? "writable" : "readable"); | |
| err = -EPROTO; | |
| goto fail; | |
| } | |
| again: | |
| /* Make sure it's OK, and get offset. */ | |
| len = vringh32_to_cpu(vrh, desc.len); | |
| if (!rcheck(vrh, vringh64_to_cpu(vrh, desc.addr), &len, &range, | |
| getrange)) { | |
| err = -EINVAL; | |
| goto fail; | |
| } | |
| addr = (void *)(unsigned long)(vringh64_to_cpu(vrh, desc.addr) + | |
| range.offset); | |
| if (unlikely(iov->used == (iov->max_num & ~VRINGH_IOV_ALLOCATED))) { | |
| err = resize_iovec(iov, gfp); | |
| if (err) | |
| goto fail; | |
| } | |
| iov->iov[iov->used].iov_base = addr; | |
| iov->iov[iov->used].iov_len = len; | |
| iov->used++; | |
| if (unlikely(len != vringh32_to_cpu(vrh, desc.len))) { | |
| desc.len = cpu_to_vringh32(vrh, | |
| vringh32_to_cpu(vrh, desc.len) - len); | |
| desc.addr = cpu_to_vringh64(vrh, | |
| vringh64_to_cpu(vrh, desc.addr) + len); | |
| goto again; | |
| } | |
| if (desc.flags & cpu_to_vringh16(vrh, VRING_DESC_F_NEXT)) { | |
| i = vringh16_to_cpu(vrh, desc.next); | |
| } else { | |
| /* Just in case we need to finish traversing above. */ | |
| if (unlikely(up_next > 0)) { | |
| i = return_from_indirect(vrh, &up_next, | |
| &descs, &desc_max); | |
| slow = false; | |
| } else | |
| break; | |
| } | |
| if (i >= desc_max) { | |
| vringh_bad("Chained index %u > %u", i, desc_max); | |
| err = -EINVAL; | |
| goto fail; | |
| } | |
| } | |
| return 0; | |
| fail: | |
| return err; | |
| } | |
| static inline int __vringh_complete(struct vringh *vrh, | |
| const struct vring_used_elem *used, | |
| unsigned int num_used, | |
| int (*putu16)(const struct vringh *vrh, | |
| __virtio16 *p, u16 val), | |
| int (*putused)(struct vring_used_elem *dst, | |
| const struct vring_used_elem | |
| *src, unsigned num)) | |
| { | |
| struct vring_used *used_ring; | |
| int err; | |
| u16 used_idx, off; | |
| used_ring = vrh->vring.used; | |
| used_idx = vrh->last_used_idx + vrh->completed; | |
| off = used_idx % vrh->vring.num; | |
| /* Compiler knows num_used == 1 sometimes, hence extra check */ | |
| if (num_used > 1 && unlikely(off + num_used >= vrh->vring.num)) { | |
| u16 part = vrh->vring.num - off; | |
| err = putused(&used_ring->ring[off], used, part); | |
| if (!err) | |
| err = putused(&used_ring->ring[0], used + part, | |
| num_used - part); | |
| } else | |
| err = putused(&used_ring->ring[off], used, num_used); | |
| if (err) { | |
| vringh_bad("Failed to write %u used entries %u at %p", | |
| num_used, off, &used_ring->ring[off]); | |
| return err; | |
| } | |
| /* Make sure buffer is written before we update index. */ | |
| virtio_wmb(vrh->weak_barriers); | |
| err = putu16(vrh, &vrh->vring.used->idx, used_idx + num_used); | |
| if (err) { | |
| vringh_bad("Failed to update used index at %p", | |
| &vrh->vring.used->idx); | |
| return err; | |
| } | |
| vrh->completed += num_used; | |
| return 0; | |
| } | |
| static inline int __vringh_need_notify(struct vringh *vrh, | |
| int (*getu16)(const struct vringh *vrh, | |
| u16 *val, | |
| const __virtio16 *p)) | |
| { | |
| bool notify; | |
| u16 used_event; | |
| int err; | |
| /* Flush out used index update. This is paired with the | |
| * barrier that the Guest executes when enabling | |
| * interrupts. */ | |
| virtio_mb(vrh->weak_barriers); | |
| /* Old-style, without event indices. */ | |
| if (!vrh->event_indices) { | |
| u16 flags; | |
| err = getu16(vrh, &flags, &vrh->vring.avail->flags); | |
| if (err) { | |
| vringh_bad("Failed to get flags at %p", | |
| &vrh->vring.avail->flags); | |
| return err; | |
| } | |
| return (!(flags & VRING_AVAIL_F_NO_INTERRUPT)); | |
| } | |
| /* Modern: we know when other side wants to know. */ | |
| err = getu16(vrh, &used_event, &vring_used_event(&vrh->vring)); | |
| if (err) { | |
| vringh_bad("Failed to get used event idx at %p", | |
| &vring_used_event(&vrh->vring)); | |
| return err; | |
| } | |
| /* Just in case we added so many that we wrap. */ | |
| if (unlikely(vrh->completed > 0xffff)) | |
| notify = true; | |
| else | |
| notify = vring_need_event(used_event, | |
| vrh->last_used_idx + vrh->completed, | |
| vrh->last_used_idx); | |
| vrh->last_used_idx += vrh->completed; | |
| vrh->completed = 0; | |
| return notify; | |
| } | |
| static inline bool __vringh_notify_enable(struct vringh *vrh, | |
| int (*getu16)(const struct vringh *vrh, | |
| u16 *val, const __virtio16 *p), | |
| int (*putu16)(const struct vringh *vrh, | |
| __virtio16 *p, u16 val)) | |
| { | |
| u16 avail; | |
| if (!vrh->event_indices) { | |
| /* Old-school; update flags. */ | |
| if (putu16(vrh, &vrh->vring.used->flags, 0) != 0) { | |
| vringh_bad("Clearing used flags %p", | |
| &vrh->vring.used->flags); | |
| return true; | |
| } | |
| } else { | |
| if (putu16(vrh, &vring_avail_event(&vrh->vring), | |
| vrh->last_avail_idx) != 0) { | |
| vringh_bad("Updating avail event index %p", | |
| &vring_avail_event(&vrh->vring)); | |
| return true; | |
| } | |
| } | |
| /* They could have slipped one in as we were doing that: make | |
| * sure it's written, then check again. */ | |
| virtio_mb(vrh->weak_barriers); | |
| if (getu16(vrh, &avail, &vrh->vring.avail->idx) != 0) { | |
| vringh_bad("Failed to check avail idx at %p", | |
| &vrh->vring.avail->idx); | |
| return true; | |
| } | |
| /* This is unlikely, so we just leave notifications enabled | |
| * (if we're using event_indices, we'll only get one | |
| * notification anyway). */ | |
| return avail == vrh->last_avail_idx; | |
| } | |
| static inline void __vringh_notify_disable(struct vringh *vrh, | |
| int (*putu16)(const struct vringh *vrh, | |
| __virtio16 *p, u16 val)) | |
| { | |
| if (!vrh->event_indices) { | |
| /* Old-school; update flags. */ | |
| if (putu16(vrh, &vrh->vring.used->flags, | |
| VRING_USED_F_NO_NOTIFY)) { | |
| vringh_bad("Setting used flags %p", | |
| &vrh->vring.used->flags); | |
| } | |
| } | |
| } | |
| /* Userspace access helpers: in this case, addresses are really userspace. */ | |
| static inline int getu16_user(const struct vringh *vrh, u16 *val, const __virtio16 *p) | |
| { | |
| __virtio16 v = 0; | |
| int rc = get_user(v, (__force __virtio16 __user *)p); | |
| *val = vringh16_to_cpu(vrh, v); | |
| return rc; | |
| } | |
| static inline int putu16_user(const struct vringh *vrh, __virtio16 *p, u16 val) | |
| { | |
| __virtio16 v = cpu_to_vringh16(vrh, val); | |
| return put_user(v, (__force __virtio16 __user *)p); | |
| } | |
| static inline int copydesc_user(void *dst, const void *src, size_t len) | |
| { | |
| return copy_from_user(dst, (__force void __user *)src, len) ? | |
| -EFAULT : 0; | |
| } | |
| static inline int putused_user(struct vring_used_elem *dst, | |
| const struct vring_used_elem *src, | |
| unsigned int num) | |
| { | |
| return copy_to_user((__force void __user *)dst, src, | |
| sizeof(*dst) * num) ? -EFAULT : 0; | |
| } | |
| static inline int xfer_from_user(void *src, void *dst, size_t len) | |
| { | |
| return copy_from_user(dst, (__force void __user *)src, len) ? | |
| -EFAULT : 0; | |
| } | |
| static inline int xfer_to_user(void *dst, void *src, size_t len) | |
| { | |
| return copy_to_user((__force void __user *)dst, src, len) ? | |
| -EFAULT : 0; | |
| } | |
| /** | |
| * vringh_init_user - initialize a vringh for a userspace vring. | |
| * @vrh: the vringh to initialize. | |
| * @features: the feature bits for this ring. | |
| * @num: the number of elements. | |
| * @weak_barriers: true if we only need memory barriers, not I/O. | |
| * @desc: the userpace descriptor pointer. | |
| * @avail: the userpace avail pointer. | |
| * @used: the userpace used pointer. | |
| * | |
| * Returns an error if num is invalid: you should check pointers | |
| * yourself! | |
| */ | |
| int vringh_init_user(struct vringh *vrh, u64 features, | |
| unsigned int num, bool weak_barriers, | |
| struct vring_desc __user *desc, | |
| struct vring_avail __user *avail, | |
| struct vring_used __user *used) | |
| { | |
| /* Sane power of 2 please! */ | |
| if (!num || num > 0xffff || (num & (num - 1))) { | |
| vringh_bad("Bad ring size %u", num); | |
| return -EINVAL; | |
| } | |
| vrh->little_endian = (features & (1ULL << VIRTIO_F_VERSION_1)); | |
| vrh->event_indices = (features & (1 << VIRTIO_RING_F_EVENT_IDX)); | |
| vrh->weak_barriers = weak_barriers; | |
| vrh->completed = 0; | |
| vrh->last_avail_idx = 0; | |
| vrh->last_used_idx = 0; | |
| vrh->vring.num = num; | |
| /* vring expects kernel addresses, but only used via accessors. */ | |
| vrh->vring.desc = (__force struct vring_desc *)desc; | |
| vrh->vring.avail = (__force struct vring_avail *)avail; | |
| vrh->vring.used = (__force struct vring_used *)used; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(vringh_init_user); | |
| /** | |
| * vringh_getdesc_user - get next available descriptor from userspace ring. | |
| * @vrh: the userspace vring. | |
| * @riov: where to put the readable descriptors (or NULL) | |
| * @wiov: where to put the writable descriptors (or NULL) | |
| * @getrange: function to call to check ranges. | |
| * @head: head index we received, for passing to vringh_complete_user(). | |
| * | |
| * Returns 0 if there was no descriptor, 1 if there was, or -errno. | |
| * | |
| * Note that on error return, you can tell the difference between an | |
| * invalid ring and a single invalid descriptor: in the former case, | |
| * *head will be vrh->vring.num. You may be able to ignore an invalid | |
| * descriptor, but there's not much you can do with an invalid ring. | |
| * | |
| * Note that you may need to clean up riov and wiov, even on error! | |
| */ | |
| int vringh_getdesc_user(struct vringh *vrh, | |
| struct vringh_iov *riov, | |
| struct vringh_iov *wiov, | |
| bool (*getrange)(struct vringh *vrh, | |
| u64 addr, struct vringh_range *r), | |
| u16 *head) | |
| { | |
| int err; | |
| *head = vrh->vring.num; | |
| err = __vringh_get_head(vrh, getu16_user, &vrh->last_avail_idx); | |
| if (err < 0) | |
| return err; | |
| /* Empty... */ | |
| if (err == vrh->vring.num) | |
| return 0; | |
| /* We need the layouts to be the identical for this to work */ | |
| BUILD_BUG_ON(sizeof(struct vringh_kiov) != sizeof(struct vringh_iov)); | |
| BUILD_BUG_ON(offsetof(struct vringh_kiov, iov) != | |
| offsetof(struct vringh_iov, iov)); | |
| BUILD_BUG_ON(offsetof(struct vringh_kiov, i) != | |
| offsetof(struct vringh_iov, i)); | |
| BUILD_BUG_ON(offsetof(struct vringh_kiov, used) != | |
| offsetof(struct vringh_iov, used)); | |
| BUILD_BUG_ON(offsetof(struct vringh_kiov, max_num) != | |
| offsetof(struct vringh_iov, max_num)); | |
| BUILD_BUG_ON(sizeof(struct iovec) != sizeof(struct kvec)); | |
| BUILD_BUG_ON(offsetof(struct iovec, iov_base) != | |
| offsetof(struct kvec, iov_base)); | |
| BUILD_BUG_ON(offsetof(struct iovec, iov_len) != | |
| offsetof(struct kvec, iov_len)); | |
| BUILD_BUG_ON(sizeof(((struct iovec *)NULL)->iov_base) | |
| != sizeof(((struct kvec *)NULL)->iov_base)); | |
| BUILD_BUG_ON(sizeof(((struct iovec *)NULL)->iov_len) | |
| != sizeof(((struct kvec *)NULL)->iov_len)); | |
| *head = err; | |
| err = __vringh_iov(vrh, *head, (struct vringh_kiov *)riov, | |
| (struct vringh_kiov *)wiov, | |
| range_check, getrange, GFP_KERNEL, copydesc_user); | |
| if (err) | |
| return err; | |
| return 1; | |
| } | |
| EXPORT_SYMBOL(vringh_getdesc_user); | |
| /** | |
| * vringh_iov_pull_user - copy bytes from vring_iov. | |
| * @riov: the riov as passed to vringh_getdesc_user() (updated as we consume) | |
| * @dst: the place to copy. | |
| * @len: the maximum length to copy. | |
| * | |
| * Returns the bytes copied <= len or a negative errno. | |
| */ | |
| ssize_t vringh_iov_pull_user(struct vringh_iov *riov, void *dst, size_t len) | |
| { | |
| return vringh_iov_xfer((struct vringh_kiov *)riov, | |
| dst, len, xfer_from_user); | |
| } | |
| EXPORT_SYMBOL(vringh_iov_pull_user); | |
| /** | |
| * vringh_iov_push_user - copy bytes into vring_iov. | |
| * @wiov: the wiov as passed to vringh_getdesc_user() (updated as we consume) | |
| * @dst: the place to copy. | |
| * @len: the maximum length to copy. | |
| * | |
| * Returns the bytes copied <= len or a negative errno. | |
| */ | |
| ssize_t vringh_iov_push_user(struct vringh_iov *wiov, | |
| const void *src, size_t len) | |
| { | |
| return vringh_iov_xfer((struct vringh_kiov *)wiov, | |
| (void *)src, len, xfer_to_user); | |
| } | |
| EXPORT_SYMBOL(vringh_iov_push_user); | |
| /** | |
| * vringh_abandon_user - we've decided not to handle the descriptor(s). | |
| * @vrh: the vring. | |
| * @num: the number of descriptors to put back (ie. num | |
| * vringh_get_user() to undo). | |
| * | |
| * The next vringh_get_user() will return the old descriptor(s) again. | |
| */ | |
| void vringh_abandon_user(struct vringh *vrh, unsigned int num) | |
| { | |
| /* We only update vring_avail_event(vr) when we want to be notified, | |
| * so we haven't changed that yet. */ | |
| vrh->last_avail_idx -= num; | |
| } | |
| EXPORT_SYMBOL(vringh_abandon_user); | |
| /** | |
| * vringh_complete_user - we've finished with descriptor, publish it. | |
| * @vrh: the vring. | |
| * @head: the head as filled in by vringh_getdesc_user. | |
| * @len: the length of data we have written. | |
| * | |
| * You should check vringh_need_notify_user() after one or more calls | |
| * to this function. | |
| */ | |
| int vringh_complete_user(struct vringh *vrh, u16 head, u32 len) | |
| { | |
| struct vring_used_elem used; | |
| used.id = cpu_to_vringh32(vrh, head); | |
| used.len = cpu_to_vringh32(vrh, len); | |
| return __vringh_complete(vrh, &used, 1, putu16_user, putused_user); | |
| } | |
| EXPORT_SYMBOL(vringh_complete_user); | |
| /** | |
| * vringh_complete_multi_user - we've finished with many descriptors. | |
| * @vrh: the vring. | |
| * @used: the head, length pairs. | |
| * @num_used: the number of used elements. | |
| * | |
| * You should check vringh_need_notify_user() after one or more calls | |
| * to this function. | |
| */ | |
| int vringh_complete_multi_user(struct vringh *vrh, | |
| const struct vring_used_elem used[], | |
| unsigned num_used) | |
| { | |
| return __vringh_complete(vrh, used, num_used, | |
| putu16_user, putused_user); | |
| } | |
| EXPORT_SYMBOL(vringh_complete_multi_user); | |
| /** | |
| * vringh_notify_enable_user - we want to know if something changes. | |
| * @vrh: the vring. | |
| * | |
| * This always enables notifications, but returns false if there are | |
| * now more buffers available in the vring. | |
| */ | |
| bool vringh_notify_enable_user(struct vringh *vrh) | |
| { | |
| return __vringh_notify_enable(vrh, getu16_user, putu16_user); | |
| } | |
| EXPORT_SYMBOL(vringh_notify_enable_user); | |
| /** | |
| * vringh_notify_disable_user - don't tell us if something changes. | |
| * @vrh: the vring. | |
| * | |
| * This is our normal running state: we disable and then only enable when | |
| * we're going to sleep. | |
| */ | |
| void vringh_notify_disable_user(struct vringh *vrh) | |
| { | |
| __vringh_notify_disable(vrh, putu16_user); | |
| } | |
| EXPORT_SYMBOL(vringh_notify_disable_user); | |
| /** | |
| * vringh_need_notify_user - must we tell the other side about used buffers? | |
| * @vrh: the vring we've called vringh_complete_user() on. | |
| * | |
| * Returns -errno or 0 if we don't need to tell the other side, 1 if we do. | |
| */ | |
| int vringh_need_notify_user(struct vringh *vrh) | |
| { | |
| return __vringh_need_notify(vrh, getu16_user); | |
| } | |
| EXPORT_SYMBOL(vringh_need_notify_user); | |
| /* Kernelspace access helpers. */ | |
| static inline int getu16_kern(const struct vringh *vrh, | |
| u16 *val, const __virtio16 *p) | |
| { | |
| *val = vringh16_to_cpu(vrh, READ_ONCE(*p)); | |
| return 0; | |
| } | |
| static inline int putu16_kern(const struct vringh *vrh, __virtio16 *p, u16 val) | |
| { | |
| WRITE_ONCE(*p, cpu_to_vringh16(vrh, val)); | |
| return 0; | |
| } | |
| static inline int copydesc_kern(void *dst, const void *src, size_t len) | |
| { | |
| memcpy(dst, src, len); | |
| return 0; | |
| } | |
| static inline int putused_kern(struct vring_used_elem *dst, | |
| const struct vring_used_elem *src, | |
| unsigned int num) | |
| { | |
| memcpy(dst, src, num * sizeof(*dst)); | |
| return 0; | |
| } | |
| static inline int xfer_kern(void *src, void *dst, size_t len) | |
| { | |
| memcpy(dst, src, len); | |
| return 0; | |
| } | |
| /** | |
| * vringh_init_kern - initialize a vringh for a kernelspace vring. | |
| * @vrh: the vringh to initialize. | |
| * @features: the feature bits for this ring. | |
| * @num: the number of elements. | |
| * @weak_barriers: true if we only need memory barriers, not I/O. | |
| * @desc: the userpace descriptor pointer. | |
| * @avail: the userpace avail pointer. | |
| * @used: the userpace used pointer. | |
| * | |
| * Returns an error if num is invalid. | |
| */ | |
| int vringh_init_kern(struct vringh *vrh, u64 features, | |
| unsigned int num, bool weak_barriers, | |
| struct vring_desc *desc, | |
| struct vring_avail *avail, | |
| struct vring_used *used) | |
| { | |
| /* Sane power of 2 please! */ | |
| if (!num || num > 0xffff || (num & (num - 1))) { | |
| vringh_bad("Bad ring size %u", num); | |
| return -EINVAL; | |
| } | |
| vrh->little_endian = (features & (1ULL << VIRTIO_F_VERSION_1)); | |
| vrh->event_indices = (features & (1 << VIRTIO_RING_F_EVENT_IDX)); | |
| vrh->weak_barriers = weak_barriers; | |
| vrh->completed = 0; | |
| vrh->last_avail_idx = 0; | |
| vrh->last_used_idx = 0; | |
| vrh->vring.num = num; | |
| vrh->vring.desc = desc; | |
| vrh->vring.avail = avail; | |
| vrh->vring.used = used; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL(vringh_init_kern); | |
| /** | |
| * vringh_getdesc_kern - get next available descriptor from kernelspace ring. | |
| * @vrh: the kernelspace vring. | |
| * @riov: where to put the readable descriptors (or NULL) | |
| * @wiov: where to put the writable descriptors (or NULL) | |
| * @head: head index we received, for passing to vringh_complete_kern(). | |
| * @gfp: flags for allocating larger riov/wiov. | |
| * | |
| * Returns 0 if there was no descriptor, 1 if there was, or -errno. | |
| * | |
| * Note that on error return, you can tell the difference between an | |
| * invalid ring and a single invalid descriptor: in the former case, | |
| * *head will be vrh->vring.num. You may be able to ignore an invalid | |
| * descriptor, but there's not much you can do with an invalid ring. | |
| * | |
| * Note that you may need to clean up riov and wiov, even on error! | |
| */ | |
| int vringh_getdesc_kern(struct vringh *vrh, | |
| struct vringh_kiov *riov, | |
| struct vringh_kiov *wiov, | |
| u16 *head, | |
| gfp_t gfp) | |
| { | |
| int err; | |
| err = __vringh_get_head(vrh, getu16_kern, &vrh->last_avail_idx); | |
| if (err < 0) | |
| return err; | |
| /* Empty... */ | |
| if (err == vrh->vring.num) | |
| return 0; | |
| *head = err; | |
| err = __vringh_iov(vrh, *head, riov, wiov, no_range_check, NULL, | |
| gfp, copydesc_kern); | |
| if (err) | |
| return err; | |
| return 1; | |
| } | |
| EXPORT_SYMBOL(vringh_getdesc_kern); | |
| /** | |
| * vringh_iov_pull_kern - copy bytes from vring_iov. | |
| * @riov: the riov as passed to vringh_getdesc_kern() (updated as we consume) | |
| * @dst: the place to copy. | |
| * @len: the maximum length to copy. | |
| * | |
| * Returns the bytes copied <= len or a negative errno. | |
| */ | |
| ssize_t vringh_iov_pull_kern(struct vringh_kiov *riov, void *dst, size_t len) | |
| { | |
| return vringh_iov_xfer(riov, dst, len, xfer_kern); | |
| } | |
| EXPORT_SYMBOL(vringh_iov_pull_kern); | |
| /** | |
| * vringh_iov_push_kern - copy bytes into vring_iov. | |
| * @wiov: the wiov as passed to vringh_getdesc_kern() (updated as we consume) | |
| * @dst: the place to copy. | |
| * @len: the maximum length to copy. | |
| * | |
| * Returns the bytes copied <= len or a negative errno. | |
| */ | |
| ssize_t vringh_iov_push_kern(struct vringh_kiov *wiov, | |
| const void *src, size_t len) | |
| { | |
| return vringh_iov_xfer(wiov, (void *)src, len, xfer_kern); | |
| } | |
| EXPORT_SYMBOL(vringh_iov_push_kern); | |
| /** | |
| * vringh_abandon_kern - we've decided not to handle the descriptor(s). | |
| * @vrh: the vring. | |
| * @num: the number of descriptors to put back (ie. num | |
| * vringh_get_kern() to undo). | |
| * | |
| * The next vringh_get_kern() will return the old descriptor(s) again. | |
| */ | |
| void vringh_abandon_kern(struct vringh *vrh, unsigned int num) | |
| { | |
| /* We only update vring_avail_event(vr) when we want to be notified, | |
| * so we haven't changed that yet. */ | |
| vrh->last_avail_idx -= num; | |
| } | |
| EXPORT_SYMBOL(vringh_abandon_kern); | |
| /** | |
| * vringh_complete_kern - we've finished with descriptor, publish it. | |
| * @vrh: the vring. | |
| * @head: the head as filled in by vringh_getdesc_kern. | |
| * @len: the length of data we have written. | |
| * | |
| * You should check vringh_need_notify_kern() after one or more calls | |
| * to this function. | |
| */ | |
| int vringh_complete_kern(struct vringh *vrh, u16 head, u32 len) | |
| { | |
| struct vring_used_elem used; | |
| used.id = cpu_to_vringh32(vrh, head); | |
| used.len = cpu_to_vringh32(vrh, len); | |
| return __vringh_complete(vrh, &used, 1, putu16_kern, putused_kern); | |
| } | |
| EXPORT_SYMBOL(vringh_complete_kern); | |
| /** | |
| * vringh_notify_enable_kern - we want to know if something changes. | |
| * @vrh: the vring. | |
| * | |
| * This always enables notifications, but returns false if there are | |
| * now more buffers available in the vring. | |
| */ | |
| bool vringh_notify_enable_kern(struct vringh *vrh) | |
| { | |
| return __vringh_notify_enable(vrh, getu16_kern, putu16_kern); | |
| } | |
| EXPORT_SYMBOL(vringh_notify_enable_kern); | |
| /** | |
| * vringh_notify_disable_kern - don't tell us if something changes. | |
| * @vrh: the vring. | |
| * | |
| * This is our normal running state: we disable and then only enable when | |
| * we're going to sleep. | |
| */ | |
| void vringh_notify_disable_kern(struct vringh *vrh) | |
| { | |
| __vringh_notify_disable(vrh, putu16_kern); | |
| } | |
| EXPORT_SYMBOL(vringh_notify_disable_kern); | |
| /** | |
| * vringh_need_notify_kern - must we tell the other side about used buffers? | |
| * @vrh: the vring we've called vringh_complete_kern() on. | |
| * | |
| * Returns -errno or 0 if we don't need to tell the other side, 1 if we do. | |
| */ | |
| int vringh_need_notify_kern(struct vringh *vrh) | |
| { | |
| return __vringh_need_notify(vrh, getu16_kern); | |
| } | |
| EXPORT_SYMBOL(vringh_need_notify_kern); | |
| MODULE_LICENSE("GPL"); |