| /* | |
| * Driver for Aeroflex Gaisler GRLIB GRUSBHC EHCI host controller | |
| * | |
| * GRUSBHC is typically found on LEON/GRLIB SoCs | |
| * | |
| * (c) Jan Andersson <jan@gaisler.com> | |
| * | |
| * Based on ehci-ppc-of.c which is: | |
| * (c) Valentine Barshak <vbarshak@ru.mvista.com> | |
| * and in turn based on "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de> | |
| * and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, but | |
| * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY | |
| * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License | |
| * for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software Foundation, | |
| * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. | |
| */ | |
| #include <linux/err.h> | |
| #include <linux/signal.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_platform.h> | |
| #define GRUSBHC_HCIVERSION 0x0100 /* Known value of cap. reg. HCIVERSION */ | |
| static const struct hc_driver ehci_grlib_hc_driver = { | |
| .description = hcd_name, | |
| .product_desc = "GRLIB GRUSBHC EHCI", | |
| .hcd_priv_size = sizeof(struct ehci_hcd), | |
| /* | |
| * generic hardware linkage | |
| */ | |
| .irq = ehci_irq, | |
| .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, | |
| /* | |
| * basic lifecycle operations | |
| */ | |
| .reset = ehci_setup, | |
| .start = ehci_run, | |
| .stop = ehci_stop, | |
| .shutdown = ehci_shutdown, | |
| /* | |
| * managing i/o requests and associated device resources | |
| */ | |
| .urb_enqueue = ehci_urb_enqueue, | |
| .urb_dequeue = ehci_urb_dequeue, | |
| .endpoint_disable = ehci_endpoint_disable, | |
| .endpoint_reset = ehci_endpoint_reset, | |
| /* | |
| * scheduling support | |
| */ | |
| .get_frame_number = ehci_get_frame, | |
| /* | |
| * root hub support | |
| */ | |
| .hub_status_data = ehci_hub_status_data, | |
| .hub_control = ehci_hub_control, | |
| #ifdef CONFIG_PM | |
| .bus_suspend = ehci_bus_suspend, | |
| .bus_resume = ehci_bus_resume, | |
| #endif | |
| .relinquish_port = ehci_relinquish_port, | |
| .port_handed_over = ehci_port_handed_over, | |
| .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, | |
| }; | |
| static int ehci_hcd_grlib_probe(struct platform_device *op) | |
| { | |
| struct device_node *dn = op->dev.of_node; | |
| struct usb_hcd *hcd; | |
| struct ehci_hcd *ehci = NULL; | |
| struct resource res; | |
| u32 hc_capbase; | |
| int irq; | |
| int rv; | |
| if (usb_disabled()) | |
| return -ENODEV; | |
| dev_dbg(&op->dev, "initializing GRUSBHC EHCI USB Controller\n"); | |
| rv = of_address_to_resource(dn, 0, &res); | |
| if (rv) | |
| return rv; | |
| /* usb_create_hcd requires dma_mask != NULL */ | |
| op->dev.dma_mask = &op->dev.coherent_dma_mask; | |
| hcd = usb_create_hcd(&ehci_grlib_hc_driver, &op->dev, | |
| "GRUSBHC EHCI USB"); | |
| if (!hcd) | |
| return -ENOMEM; | |
| hcd->rsrc_start = res.start; | |
| hcd->rsrc_len = resource_size(&res); | |
| irq = irq_of_parse_and_map(dn, 0); | |
| if (irq == NO_IRQ) { | |
| dev_err(&op->dev, "%s: irq_of_parse_and_map failed\n", | |
| __FILE__); | |
| rv = -EBUSY; | |
| goto err_irq; | |
| } | |
| hcd->regs = devm_ioremap_resource(&op->dev, &res); | |
| if (IS_ERR(hcd->regs)) { | |
| rv = PTR_ERR(hcd->regs); | |
| goto err_ioremap; | |
| } | |
| ehci = hcd_to_ehci(hcd); | |
| ehci->caps = hcd->regs; | |
| /* determine endianness of this implementation */ | |
| hc_capbase = ehci_readl(ehci, &ehci->caps->hc_capbase); | |
| if (HC_VERSION(ehci, hc_capbase) != GRUSBHC_HCIVERSION) { | |
| ehci->big_endian_mmio = 1; | |
| ehci->big_endian_desc = 1; | |
| ehci->big_endian_capbase = 1; | |
| } | |
| rv = usb_add_hcd(hcd, irq, 0); | |
| if (rv) | |
| goto err_ioremap; | |
| device_wakeup_enable(hcd->self.controller); | |
| return 0; | |
| err_ioremap: | |
| irq_dispose_mapping(irq); | |
| err_irq: | |
| usb_put_hcd(hcd); | |
| return rv; | |
| } | |
| static int ehci_hcd_grlib_remove(struct platform_device *op) | |
| { | |
| struct usb_hcd *hcd = platform_get_drvdata(op); | |
| dev_dbg(&op->dev, "stopping GRLIB GRUSBHC EHCI USB Controller\n"); | |
| usb_remove_hcd(hcd); | |
| irq_dispose_mapping(hcd->irq); | |
| usb_put_hcd(hcd); | |
| return 0; | |
| } | |
| static const struct of_device_id ehci_hcd_grlib_of_match[] = { | |
| { | |
| .name = "GAISLER_EHCI", | |
| }, | |
| { | |
| .name = "01_026", | |
| }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, ehci_hcd_grlib_of_match); | |
| static struct platform_driver ehci_grlib_driver = { | |
| .probe = ehci_hcd_grlib_probe, | |
| .remove = ehci_hcd_grlib_remove, | |
| .shutdown = usb_hcd_platform_shutdown, | |
| .driver = { | |
| .name = "grlib-ehci", | |
| .of_match_table = ehci_hcd_grlib_of_match, | |
| }, | |
| }; |