drivers/ide/cy82c693.c - third_party/linux - Git at Google

 /*
  *  Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
  *  Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator
  *  Copyright (C) 2007-2011 Bartlomiej Zolnierkiewicz
  *
  * CYPRESS CY82C693 chipset IDE controller
  *
  * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards.
  */

 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/pci.h>
 #include <linux/ide.h>
 #include <linux/init.h>

 #include <asm/io.h>

 #define DRV_NAME "cy82c693"

 /*
  *	NOTE: the value for busmaster timeout is tricky and I got it by
  *	trial and error!  By using a to low value will cause DMA timeouts
  *	and drop IDE performance, and by using a to high value will cause
  *	audio playback to scatter.
  *	If you know a better value or how to calc it, please let me know.
  */

 /* twice the value written in cy82c693ub datasheet */
 #define BUSMASTER_TIMEOUT	0x50
 /*
  * the value above was tested on my machine and it seems to work okay
  */

 /* here are the offset definitions for the registers */
 #define CY82_IDE_CMDREG		0x04
 #define CY82_IDE_ADDRSETUP	0x48
 #define CY82_IDE_MASTER_IOR	0x4C
 #define CY82_IDE_MASTER_IOW	0x4D
 #define CY82_IDE_SLAVE_IOR	0x4E
 #define CY82_IDE_SLAVE_IOW	0x4F
 #define CY82_IDE_MASTER_8BIT	0x50
 #define CY82_IDE_SLAVE_8BIT	0x51

 #define CY82_INDEX_PORT		0x22
 #define CY82_DATA_PORT		0x23

 #define CY82_INDEX_CHANNEL0	0x30
 #define CY82_INDEX_CHANNEL1	0x31
 #define CY82_INDEX_TIMEOUT	0x32

 /*
  * set DMA mode a specific channel for CY82C693
  */

 static void cy82c693_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	const u8 mode = drive->dma_mode;
 	u8 single = (mode & 0x10) >> 4, index = 0, data = 0;

 	index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0;

 	data = (mode & 3) | (single << 2);

 	outb(index, CY82_INDEX_PORT);
 	outb(data, CY82_DATA_PORT);

 	/*
 	 * note: below we set the value for Bus Master IDE TimeOut Register
 	 * I'm not absolutely sure what this does, but it solved my problem
 	 * with IDE DMA and sound, so I now can play sound and work with
 	 * my IDE driver at the same time :-)
 	 *
 	 * If you know the correct (best) value for this register please
 	 * let me know - ASK
 	 */

 	data = BUSMASTER_TIMEOUT;
 	outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
 	outb(data, CY82_DATA_PORT);
 }

 static void cy82c693_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
 	const unsigned long T = 1000000 / bus_speed;
 	unsigned int addrCtrl;
 	struct ide_timing t;
 	u8 time_16, time_8;

 	/* select primary or secondary channel */
 	if (drive->dn > 1) {  /* drive is on the secondary channel */
 		dev = pci_get_slot(dev->bus, dev->devfn+1);
 		if (!dev) {
 			printk(KERN_ERR "%s: tune_drive: "
 				"Cannot find secondary interface!\n",
 				drive->name);
 			return;
 		}
 	}

 	ide_timing_compute(drive, drive->pio_mode, &t, T, 1);

 	time_16 = clamp_val(t.recover - 1, 0, 15) |
 		  (clamp_val(t.active - 1, 0, 15) << 4);
 	time_8 = clamp_val(t.act8b - 1, 0, 15) |
 		 (clamp_val(t.rec8b - 1, 0, 15) << 4);

 	/* now let's write  the clocks registers */
 	if ((drive->dn & 1) == 0) {
 		/*
 		 * set master drive
 		 * address setup control register
 		 * is 32 bit !!!
 		 */
 		pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);

 		addrCtrl &= (~0xF);
 		addrCtrl |= clamp_val(t.setup - 1, 0, 15);
 		pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);

 		/* now let's set the remaining registers */
 		pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, time_16);
 		pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, time_16);
 		pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, time_8);
 	} else {
 		/*
 		 * set slave drive
 		 * address setup control register
 		 * is 32 bit !!!
 		 */
 		pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);

 		addrCtrl &= (~0xF0);
 		addrCtrl |= (clamp_val(t.setup - 1, 0, 15) << 4);
 		pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);

 		/* now let's set the remaining registers */
 		pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, time_16);
 		pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16);
 		pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8);
 	}
 	if (drive->dn > 1)
 		pci_dev_put(dev);
 }

 static void init_iops_cy82c693(ide_hwif_t *hwif)
 {
 	static ide_hwif_t *primary;
 	struct pci_dev *dev = to_pci_dev(hwif->dev);

 	if (PCI_FUNC(dev->devfn) == 1)
 		primary = hwif;
 	else {
 		hwif->mate = primary;
 		hwif->channel = 1;
 	}
 }

 static const struct ide_port_ops cy82c693_port_ops = {
 	.set_pio_mode		= cy82c693_set_pio_mode,
 	.set_dma_mode		= cy82c693_set_dma_mode,
 };

 static const struct ide_port_info cy82c693_chipset = {
 	.name		= DRV_NAME,
 	.init_iops	= init_iops_cy82c693,
 	.port_ops	= &cy82c693_port_ops,
 	.host_flags	= IDE_HFLAG_SINGLE,
 	.pio_mask	= ATA_PIO4,
 	.swdma_mask	= ATA_SWDMA2,
 	.mwdma_mask	= ATA_MWDMA2,
 };

 static int cy82c693_init_one(struct pci_dev *dev,
 			     const struct pci_device_id *id)
 {
 	struct pci_dev *dev2;
 	int ret = -ENODEV;

 	/* CY82C693 is more than only a IDE controller.
 	   Function 1 is primary IDE channel, function 2 - secondary. */
 	if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
 	    PCI_FUNC(dev->devfn) == 1) {
 		dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
 		ret = ide_pci_init_two(dev, dev2, &cy82c693_chipset, NULL);
 		if (ret)
 			pci_dev_put(dev2);
 	}
 	return ret;
 }

 static void cy82c693_remove(struct pci_dev *dev)
 {
 	struct ide_host *host = pci_get_drvdata(dev);
 	struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;

 	ide_pci_remove(dev);
 	pci_dev_put(dev2);
 }

 static const struct pci_device_id cy82c693_pci_tbl[] = {
 	{ PCI_VDEVICE(CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693), 0 },
 	{ 0, },
 };
 MODULE_DEVICE_TABLE(pci, cy82c693_pci_tbl);

 static struct pci_driver cy82c693_pci_driver = {
 	.name		= "Cypress_IDE",
 	.id_table	= cy82c693_pci_tbl,
 	.probe		= cy82c693_init_one,
 	.remove		= cy82c693_remove,
 	.suspend	= ide_pci_suspend,
 	.resume		= ide_pci_resume,
 };

 static int __init cy82c693_ide_init(void)
 {
 	return ide_pci_register_driver(&cy82c693_pci_driver);
 }

 static void __exit cy82c693_ide_exit(void)
 {
 	pci_unregister_driver(&cy82c693_pci_driver);
 }

 module_init(cy82c693_ide_init);
 module_exit(cy82c693_ide_exit);

 MODULE_AUTHOR("Andreas Krebs, Andre Hedrick, Bartlomiej Zolnierkiewicz");
 MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE");
 MODULE_LICENSE("GPL");
	/*
	* Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
	* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator
	* Copyright (C) 2007-2011 Bartlomiej Zolnierkiewicz
	*
	* CYPRESS CY82C693 chipset IDE controller
	*
	* The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards.
	*/

	#include <linux/module.h>
	#include <linux/types.h>
	#include <linux/pci.h>
	#include <linux/ide.h>
	#include <linux/init.h>

	#include <asm/io.h>

	#define DRV_NAME "cy82c693"

	/*
	* NOTE: the value for busmaster timeout is tricky and I got it by
	* trial and error! By using a to low value will cause DMA timeouts
	* and drop IDE performance, and by using a to high value will cause
	* audio playback to scatter.
	* If you know a better value or how to calc it, please let me know.
	*/

	/* twice the value written in cy82c693ub datasheet */
	#define BUSMASTER_TIMEOUT 0x50
	/*
	* the value above was tested on my machine and it seems to work okay
	*/

	/* here are the offset definitions for the registers */
	#define CY82_IDE_CMDREG 0x04
	#define CY82_IDE_ADDRSETUP 0x48
	#define CY82_IDE_MASTER_IOR 0x4C
	#define CY82_IDE_MASTER_IOW 0x4D
	#define CY82_IDE_SLAVE_IOR 0x4E
	#define CY82_IDE_SLAVE_IOW 0x4F
	#define CY82_IDE_MASTER_8BIT 0x50
	#define CY82_IDE_SLAVE_8BIT 0x51

	#define CY82_INDEX_PORT 0x22
	#define CY82_DATA_PORT 0x23

	#define CY82_INDEX_CHANNEL0 0x30
	#define CY82_INDEX_CHANNEL1 0x31
	#define CY82_INDEX_TIMEOUT 0x32

	/*
	* set DMA mode a specific channel for CY82C693
	*/

	static void cy82c693_set_dma_mode(ide_hwif_t hwif, ide_drive_t drive)
	{
	const u8 mode = drive->dma_mode;
	u8 single = (mode & 0x10) >> 4, index = 0, data = 0;

	index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0;

	data = (mode & 3) \| (single << 2);

	outb(index, CY82_INDEX_PORT);
	outb(data, CY82_DATA_PORT);

	/*
	* note: below we set the value for Bus Master IDE TimeOut Register
	* I'm not absolutely sure what this does, but it solved my problem
	* with IDE DMA and sound, so I now can play sound and work with
	* my IDE driver at the same time :-)
	*
	* If you know the correct (best) value for this register please
	* let me know - ASK
	*/

	data = BUSMASTER_TIMEOUT;
	outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
	outb(data, CY82_DATA_PORT);
	}

	static void cy82c693_set_pio_mode(ide_hwif_t hwif, ide_drive_t drive)
	{
	struct pci_dev *dev = to_pci_dev(hwif->dev);
	int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
	const unsigned long T = 1000000 / bus_speed;
	unsigned int addrCtrl;
	struct ide_timing t;
	u8 time_16, time_8;

	/* select primary or secondary channel */
	if (drive->dn > 1) { /* drive is on the secondary channel */
	dev = pci_get_slot(dev->bus, dev->devfn+1);
	if (!dev) {
	printk(KERN_ERR "%s: tune_drive: "
	"Cannot find secondary interface!\n",
	drive->name);
	return;
	}
	}

	ide_timing_compute(drive, drive->pio_mode, &t, T, 1);

	time_16 = clamp_val(t.recover - 1, 0, 15) \|
	(clamp_val(t.active - 1, 0, 15) << 4);
	time_8 = clamp_val(t.act8b - 1, 0, 15) \|
	(clamp_val(t.rec8b - 1, 0, 15) << 4);

	/* now let's write the clocks registers */
	if ((drive->dn & 1) == 0) {
	/*
	* set master drive
	* address setup control register
	* is 32 bit !!!
	*/
	pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);

	addrCtrl &= (~0xF);
	addrCtrl \|= clamp_val(t.setup - 1, 0, 15);
	pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);

	/* now let's set the remaining registers */
	pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, time_16);
	pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, time_16);
	pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, time_8);
	} else {
	/*
	* set slave drive
	* address setup control register
	* is 32 bit !!!
	*/
	pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);

	addrCtrl &= (~0xF0);
	addrCtrl \|= (clamp_val(t.setup - 1, 0, 15) << 4);
	pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);

	/* now let's set the remaining registers */
	pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, time_16);
	pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, time_16);
	pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, time_8);
	}
	if (drive->dn > 1)
	pci_dev_put(dev);
	}

	static void init_iops_cy82c693(ide_hwif_t *hwif)
	{
	static ide_hwif_t *primary;
	struct pci_dev *dev = to_pci_dev(hwif->dev);

	if (PCI_FUNC(dev->devfn) == 1)
	primary = hwif;
	else {
	hwif->mate = primary;
	hwif->channel = 1;
	}
	}

	static const struct ide_port_ops cy82c693_port_ops = {
	.set_pio_mode = cy82c693_set_pio_mode,
	.set_dma_mode = cy82c693_set_dma_mode,
	};

	static const struct ide_port_info cy82c693_chipset = {
	.name = DRV_NAME,
	.init_iops = init_iops_cy82c693,
	.port_ops = &cy82c693_port_ops,
	.host_flags = IDE_HFLAG_SINGLE,
	.pio_mask = ATA_PIO4,
	.swdma_mask = ATA_SWDMA2,
	.mwdma_mask = ATA_MWDMA2,
	};

	static int cy82c693_init_one(struct pci_dev *dev,
	const struct pci_device_id *id)
	{
	struct pci_dev *dev2;
	int ret = -ENODEV;

	/* CY82C693 is more than only a IDE controller.
	Function 1 is primary IDE channel, function 2 - secondary. */
	if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
	PCI_FUNC(dev->devfn) == 1) {
	dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
	ret = ide_pci_init_two(dev, dev2, &cy82c693_chipset, NULL);
	if (ret)
	pci_dev_put(dev2);
	}
	return ret;
	}

	static void cy82c693_remove(struct pci_dev *dev)
	{
	struct ide_host *host = pci_get_drvdata(dev);
	struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;

	ide_pci_remove(dev);
	pci_dev_put(dev2);
	}

	static const struct pci_device_id cy82c693_pci_tbl[] = {
	{ PCI_VDEVICE(CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693), 0 },
	{ 0, },
	};
	MODULE_DEVICE_TABLE(pci, cy82c693_pci_tbl);

	static struct pci_driver cy82c693_pci_driver = {
	.name = "Cypress_IDE",
	.id_table = cy82c693_pci_tbl,
	.probe = cy82c693_init_one,
	.remove = cy82c693_remove,
	.suspend = ide_pci_suspend,
	.resume = ide_pci_resume,
	};

	static int __init cy82c693_ide_init(void)
	{
	return ide_pci_register_driver(&cy82c693_pci_driver);
	}

	static void __exit cy82c693_ide_exit(void)
	{
	pci_unregister_driver(&cy82c693_pci_driver);
	}

	module_init(cy82c693_ide_init);
	module_exit(cy82c693_ide_exit);

	MODULE_AUTHOR("Andreas Krebs, Andre Hedrick, Bartlomiej Zolnierkiewicz");
	MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE");
	MODULE_LICENSE("GPL");