drivers/phy/phy-berlin-sata.c - third_party/linux - Git at Google

 /*
  * Marvell Berlin SATA PHY driver
  *
  * Copyright (C) 2014 Marvell Technology Group Ltd.
  *
  * Antoine Ténart <antoine.tenart@free-electrons.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */

 #include <linux/clk.h>
 #include <linux/module.h>
 #include <linux/phy/phy.h>
 #include <linux/io.h>
 #include <linux/platform_device.h>

 #define HOST_VSA_ADDR		0x0
 #define HOST_VSA_DATA		0x4
 #define PORT_SCR_CTL		0x2c
 #define PORT_VSR_ADDR		0x78
 #define PORT_VSR_DATA		0x7c

 #define CONTROL_REGISTER	0x0
 #define MBUS_SIZE_CONTROL	0x4

 #define POWER_DOWN_PHY0			BIT(6)
 #define POWER_DOWN_PHY1			BIT(14)
 #define MBUS_WRITE_REQUEST_SIZE_128	(BIT(2) << 16)
 #define MBUS_READ_REQUEST_SIZE_128	(BIT(2) << 19)

 #define BG2_PHY_BASE		0x080
 #define BG2Q_PHY_BASE		0x200

 /* register 0x01 */
 #define REF_FREF_SEL_25		BIT(0)
 #define PHY_MODE_SATA		(0x0 << 5)

 /* register 0x02 */
 #define USE_MAX_PLL_RATE	BIT(12)

 /* register 0x23 */
 #define DATA_BIT_WIDTH_10	(0x0 << 10)
 #define DATA_BIT_WIDTH_20	(0x1 << 10)
 #define DATA_BIT_WIDTH_40	(0x2 << 10)

 /* register 0x25 */
 #define PHY_GEN_MAX_1_5		(0x0 << 10)
 #define PHY_GEN_MAX_3_0		(0x1 << 10)
 #define PHY_GEN_MAX_6_0		(0x2 << 10)

 struct phy_berlin_desc {
 	struct phy	*phy;
 	u32		power_bit;
 	unsigned	index;
 };

 struct phy_berlin_priv {
 	void __iomem		*base;
 	spinlock_t		lock;
 	struct clk		*clk;
 	struct phy_berlin_desc	**phys;
 	unsigned		nphys;
 	u32			phy_base;
 };

 static inline void phy_berlin_sata_reg_setbits(void __iomem *ctrl_reg,
 			       u32 phy_base, u32 reg, u32 mask, u32 val)
 {
 	u32 regval;

 	/* select register */
 	writel(phy_base + reg, ctrl_reg + PORT_VSR_ADDR);

 	/* set bits */
 	regval = readl(ctrl_reg + PORT_VSR_DATA);
 	regval &= ~mask;
 	regval |= val;
 	writel(regval, ctrl_reg + PORT_VSR_DATA);
 }

 static int phy_berlin_sata_power_on(struct phy *phy)
 {
 	struct phy_berlin_desc *desc = phy_get_drvdata(phy);
 	struct phy_berlin_priv *priv = dev_get_drvdata(phy->dev.parent);
 	void __iomem *ctrl_reg = priv->base + 0x60 + (desc->index * 0x80);
 	u32 regval;

 	clk_prepare_enable(priv->clk);

 	spin_lock(&priv->lock);

 	/* Power on PHY */
 	writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR);
 	regval = readl(priv->base + HOST_VSA_DATA);
 	regval &= ~desc->power_bit;
 	writel(regval, priv->base + HOST_VSA_DATA);

 	/* Configure MBus */
 	writel(MBUS_SIZE_CONTROL, priv->base + HOST_VSA_ADDR);
 	regval = readl(priv->base + HOST_VSA_DATA);
 	regval |= MBUS_WRITE_REQUEST_SIZE_128 | MBUS_READ_REQUEST_SIZE_128;
 	writel(regval, priv->base + HOST_VSA_DATA);

 	/* set PHY mode and ref freq to 25 MHz */
 	phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x01,
 				    0x00ff, REF_FREF_SEL_25 | PHY_MODE_SATA);

 	/* set PHY up to 6 Gbps */
 	phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x25,
 				    0x0c00, PHY_GEN_MAX_6_0);

 	/* set 40 bits width */
 	phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x23,
 				    0x0c00, DATA_BIT_WIDTH_40);

 	/* use max pll rate */
 	phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x02,
 				    0x0000, USE_MAX_PLL_RATE);

 	/* set Gen3 controller speed */
 	regval = readl(ctrl_reg + PORT_SCR_CTL);
 	regval &= ~GENMASK(7, 4);
 	regval |= 0x30;
 	writel(regval, ctrl_reg + PORT_SCR_CTL);

 	spin_unlock(&priv->lock);

 	clk_disable_unprepare(priv->clk);

 	return 0;
 }

 static int phy_berlin_sata_power_off(struct phy *phy)
 {
 	struct phy_berlin_desc *desc = phy_get_drvdata(phy);
 	struct phy_berlin_priv *priv = dev_get_drvdata(phy->dev.parent);
 	u32 regval;

 	clk_prepare_enable(priv->clk);

 	spin_lock(&priv->lock);

 	/* Power down PHY */
 	writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR);
 	regval = readl(priv->base + HOST_VSA_DATA);
 	regval |= desc->power_bit;
 	writel(regval, priv->base + HOST_VSA_DATA);

 	spin_unlock(&priv->lock);

 	clk_disable_unprepare(priv->clk);

 	return 0;
 }

 static struct phy *phy_berlin_sata_phy_xlate(struct device *dev,
 					     struct of_phandle_args *args)
 {
 	struct phy_berlin_priv *priv = dev_get_drvdata(dev);
 	int i;

 	if (WARN_ON(args->args[0] >= priv->nphys))
 		return ERR_PTR(-ENODEV);

 	for (i = 0; i < priv->nphys; i++) {
 		if (priv->phys[i]->index == args->args[0])
 			break;
 	}

 	if (i == priv->nphys)
 		return ERR_PTR(-ENODEV);

 	return priv->phys[i]->phy;
 }

 static const struct phy_ops phy_berlin_sata_ops = {
 	.power_on	= phy_berlin_sata_power_on,
 	.power_off	= phy_berlin_sata_power_off,
 	.owner		= THIS_MODULE,
 };

 static u32 phy_berlin_power_down_bits[] = {
 	POWER_DOWN_PHY0,
 	POWER_DOWN_PHY1,
 };

 static int phy_berlin_sata_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *child;
 	struct phy *phy;
 	struct phy_provider *phy_provider;
 	struct phy_berlin_priv *priv;
 	struct resource *res;
 	int ret, i = 0;
 	u32 phy_id;

 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;

 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
 		return -EINVAL;

 	priv->base = devm_ioremap(dev, res->start, resource_size(res));
 	if (!priv->base)
 		return -ENOMEM;

 	priv->clk = devm_clk_get(dev, NULL);
 	if (IS_ERR(priv->clk))
 		return PTR_ERR(priv->clk);

 	priv->nphys = of_get_child_count(dev->of_node);
 	if (priv->nphys == 0)
 		return -ENODEV;

 	priv->phys = devm_kcalloc(dev, priv->nphys, sizeof(*priv->phys),
 				  GFP_KERNEL);
 	if (!priv->phys)
 		return -ENOMEM;

 	if (of_device_is_compatible(dev->of_node, "marvell,berlin2-sata-phy"))
 		priv->phy_base = BG2_PHY_BASE;
 	else
 		priv->phy_base = BG2Q_PHY_BASE;

 	dev_set_drvdata(dev, priv);
 	spin_lock_init(&priv->lock);

 	for_each_available_child_of_node(dev->of_node, child) {
 		struct phy_berlin_desc *phy_desc;

 		if (of_property_read_u32(child, "reg", &phy_id)) {
 			dev_err(dev, "missing reg property in node %s\n",
 				child->name);
 			ret = -EINVAL;
 			goto put_child;
 		}

 		if (phy_id >= ARRAY_SIZE(phy_berlin_power_down_bits)) {
 			dev_err(dev, "invalid reg in node %s\n", child->name);
 			ret = -EINVAL;
 			goto put_child;
 		}

 		phy_desc = devm_kzalloc(dev, sizeof(*phy_desc), GFP_KERNEL);
 		if (!phy_desc) {
 			ret = -ENOMEM;
 			goto put_child;
 		}

 		phy = devm_phy_create(dev, NULL, &phy_berlin_sata_ops);
 		if (IS_ERR(phy)) {
 			dev_err(dev, "failed to create PHY %d\n", phy_id);
 			ret = PTR_ERR(phy);
 			goto put_child;
 		}

 		phy_desc->phy = phy;
 		phy_desc->power_bit = phy_berlin_power_down_bits[phy_id];
 		phy_desc->index = phy_id;
 		phy_set_drvdata(phy, phy_desc);

 		priv->phys[i++] = phy_desc;

 		/* Make sure the PHY is off */
 		phy_berlin_sata_power_off(phy);
 	}

 	phy_provider =
 		devm_of_phy_provider_register(dev, phy_berlin_sata_phy_xlate);
 	return PTR_ERR_OR_ZERO(phy_provider);
 put_child:
 	of_node_put(child);
 	return ret;
 }

 static const struct of_device_id phy_berlin_sata_of_match[] = {
 	{ .compatible = "marvell,berlin2-sata-phy" },
 	{ .compatible = "marvell,berlin2q-sata-phy" },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, phy_berlin_sata_of_match);

 static struct platform_driver phy_berlin_sata_driver = {
 	.probe	= phy_berlin_sata_probe,
 	.driver	= {
 		.name		= "phy-berlin-sata",
 		.of_match_table	= phy_berlin_sata_of_match,
 	},
 };
 module_platform_driver(phy_berlin_sata_driver);

 MODULE_DESCRIPTION("Marvell Berlin SATA PHY driver");
 MODULE_AUTHOR("Antoine Ténart <antoine.tenart@free-electrons.com>");
 MODULE_LICENSE("GPL v2");
	/*
	* Marvell Berlin SATA PHY driver
	*
	* Copyright (C) 2014 Marvell Technology Group Ltd.
	*
	* Antoine Ténart <antoine.tenart@free-electrons.com>
	*
	* This file is licensed under the terms of the GNU General Public
	* License version 2. This program is licensed "as is" without any
	* warranty of any kind, whether express or implied.
	*/

	#include <linux/clk.h>
	#include <linux/module.h>
	#include <linux/phy/phy.h>
	#include <linux/io.h>
	#include <linux/platform_device.h>

	#define HOST_VSA_ADDR 0x0
	#define HOST_VSA_DATA 0x4
	#define PORT_SCR_CTL 0x2c
	#define PORT_VSR_ADDR 0x78
	#define PORT_VSR_DATA 0x7c

	#define CONTROL_REGISTER 0x0
	#define MBUS_SIZE_CONTROL 0x4

	#define POWER_DOWN_PHY0 BIT(6)
	#define POWER_DOWN_PHY1 BIT(14)
	#define MBUS_WRITE_REQUEST_SIZE_128 (BIT(2) << 16)
	#define MBUS_READ_REQUEST_SIZE_128 (BIT(2) << 19)

	#define BG2_PHY_BASE 0x080
	#define BG2Q_PHY_BASE 0x200

	/* register 0x01 */
	#define REF_FREF_SEL_25 BIT(0)
	#define PHY_MODE_SATA (0x0 << 5)

	/* register 0x02 */
	#define USE_MAX_PLL_RATE BIT(12)

	/* register 0x23 */
	#define DATA_BIT_WIDTH_10 (0x0 << 10)
	#define DATA_BIT_WIDTH_20 (0x1 << 10)
	#define DATA_BIT_WIDTH_40 (0x2 << 10)

	/* register 0x25 */
	#define PHY_GEN_MAX_1_5 (0x0 << 10)
	#define PHY_GEN_MAX_3_0 (0x1 << 10)
	#define PHY_GEN_MAX_6_0 (0x2 << 10)

	struct phy_berlin_desc {
	struct phy *phy;
	u32 power_bit;
	unsigned index;
	};

	struct phy_berlin_priv {
	void __iomem *base;
	spinlock_t lock;
	struct clk *clk;
	struct phy_berlin_desc **phys;
	unsigned nphys;
	u32 phy_base;
	};

	static inline void phy_berlin_sata_reg_setbits(void __iomem *ctrl_reg,
	u32 phy_base, u32 reg, u32 mask, u32 val)
	{
	u32 regval;

	/* select register */
	writel(phy_base + reg, ctrl_reg + PORT_VSR_ADDR);

	/* set bits */
	regval = readl(ctrl_reg + PORT_VSR_DATA);
	regval &= ~mask;
	regval \|= val;
	writel(regval, ctrl_reg + PORT_VSR_DATA);
	}

	static int phy_berlin_sata_power_on(struct phy *phy)
	{
	struct phy_berlin_desc *desc = phy_get_drvdata(phy);
	struct phy_berlin_priv *priv = dev_get_drvdata(phy->dev.parent);
	void __iomem ctrl_reg = priv->base + 0x60 + (desc->index 0x80);
	u32 regval;

	clk_prepare_enable(priv->clk);

	spin_lock(&priv->lock);

	/* Power on PHY */
	writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR);
	regval = readl(priv->base + HOST_VSA_DATA);
	regval &= ~desc->power_bit;
	writel(regval, priv->base + HOST_VSA_DATA);

	/* Configure MBus */
	writel(MBUS_SIZE_CONTROL, priv->base + HOST_VSA_ADDR);
	regval = readl(priv->base + HOST_VSA_DATA);
	regval \|= MBUS_WRITE_REQUEST_SIZE_128 \| MBUS_READ_REQUEST_SIZE_128;
	writel(regval, priv->base + HOST_VSA_DATA);

	/* set PHY mode and ref freq to 25 MHz */
	phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x01,
	0x00ff, REF_FREF_SEL_25 \| PHY_MODE_SATA);

	/* set PHY up to 6 Gbps */
	phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x25,
	0x0c00, PHY_GEN_MAX_6_0);

	/* set 40 bits width */
	phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x23,
	0x0c00, DATA_BIT_WIDTH_40);

	/* use max pll rate */
	phy_berlin_sata_reg_setbits(ctrl_reg, priv->phy_base, 0x02,
	0x0000, USE_MAX_PLL_RATE);

	/* set Gen3 controller speed */
	regval = readl(ctrl_reg + PORT_SCR_CTL);
	regval &= ~GENMASK(7, 4);
	regval \|= 0x30;
	writel(regval, ctrl_reg + PORT_SCR_CTL);

	spin_unlock(&priv->lock);

	clk_disable_unprepare(priv->clk);

	return 0;
	}

	static int phy_berlin_sata_power_off(struct phy *phy)
	{
	struct phy_berlin_desc *desc = phy_get_drvdata(phy);
	struct phy_berlin_priv *priv = dev_get_drvdata(phy->dev.parent);
	u32 regval;

	clk_prepare_enable(priv->clk);

	spin_lock(&priv->lock);

	/* Power down PHY */
	writel(CONTROL_REGISTER, priv->base + HOST_VSA_ADDR);
	regval = readl(priv->base + HOST_VSA_DATA);
	regval \|= desc->power_bit;
	writel(regval, priv->base + HOST_VSA_DATA);

	spin_unlock(&priv->lock);

	clk_disable_unprepare(priv->clk);

	return 0;
	}

	static struct phy phy_berlin_sata_phy_xlate(struct device dev,
	struct of_phandle_args *args)
	{
	struct phy_berlin_priv *priv = dev_get_drvdata(dev);
	int i;

	if (WARN_ON(args->args[0] >= priv->nphys))
	return ERR_PTR(-ENODEV);

	for (i = 0; i < priv->nphys; i++) {
	if (priv->phys[i]->index == args->args[0])
	break;
	}

	if (i == priv->nphys)
	return ERR_PTR(-ENODEV);

	return priv->phys[i]->phy;
	}

	static const struct phy_ops phy_berlin_sata_ops = {
	.power_on = phy_berlin_sata_power_on,
	.power_off = phy_berlin_sata_power_off,
	.owner = THIS_MODULE,
	};

	static u32 phy_berlin_power_down_bits[] = {
	POWER_DOWN_PHY0,
	POWER_DOWN_PHY1,
	};

	static int phy_berlin_sata_probe(struct platform_device *pdev)
	{
	struct device *dev = &pdev->dev;
	struct device_node *child;
	struct phy *phy;
	struct phy_provider *phy_provider;
	struct phy_berlin_priv *priv;
	struct resource *res;
	int ret, i = 0;
	u32 phy_id;

	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
	if (!priv)
	return -ENOMEM;

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!res)
	return -EINVAL;

	priv->base = devm_ioremap(dev, res->start, resource_size(res));
	if (!priv->base)
	return -ENOMEM;

	priv->clk = devm_clk_get(dev, NULL);
	if (IS_ERR(priv->clk))
	return PTR_ERR(priv->clk);

	priv->nphys = of_get_child_count(dev->of_node);
	if (priv->nphys == 0)
	return -ENODEV;

	priv->phys = devm_kcalloc(dev, priv->nphys, sizeof(*priv->phys),
	GFP_KERNEL);
	if (!priv->phys)
	return -ENOMEM;

	if (of_device_is_compatible(dev->of_node, "marvell,berlin2-sata-phy"))
	priv->phy_base = BG2_PHY_BASE;
	else
	priv->phy_base = BG2Q_PHY_BASE;

	dev_set_drvdata(dev, priv);
	spin_lock_init(&priv->lock);

	for_each_available_child_of_node(dev->of_node, child) {
	struct phy_berlin_desc *phy_desc;

	if (of_property_read_u32(child, "reg", &phy_id)) {
	dev_err(dev, "missing reg property in node %s\n",
	child->name);
	ret = -EINVAL;
	goto put_child;
	}

	if (phy_id >= ARRAY_SIZE(phy_berlin_power_down_bits)) {
	dev_err(dev, "invalid reg in node %s\n", child->name);
	ret = -EINVAL;
	goto put_child;
	}

	phy_desc = devm_kzalloc(dev, sizeof(*phy_desc), GFP_KERNEL);
	if (!phy_desc) {
	ret = -ENOMEM;
	goto put_child;
	}

	phy = devm_phy_create(dev, NULL, &phy_berlin_sata_ops);
	if (IS_ERR(phy)) {
	dev_err(dev, "failed to create PHY %d\n", phy_id);
	ret = PTR_ERR(phy);
	goto put_child;
	}

	phy_desc->phy = phy;
	phy_desc->power_bit = phy_berlin_power_down_bits[phy_id];
	phy_desc->index = phy_id;
	phy_set_drvdata(phy, phy_desc);

	priv->phys[i++] = phy_desc;

	/* Make sure the PHY is off */
	phy_berlin_sata_power_off(phy);
	}

	phy_provider =
	devm_of_phy_provider_register(dev, phy_berlin_sata_phy_xlate);
	return PTR_ERR_OR_ZERO(phy_provider);
	put_child:
	of_node_put(child);
	return ret;
	}

	static const struct of_device_id phy_berlin_sata_of_match[] = {
	{ .compatible = "marvell,berlin2-sata-phy" },
	{ .compatible = "marvell,berlin2q-sata-phy" },
	{ },
	};
	MODULE_DEVICE_TABLE(of, phy_berlin_sata_of_match);

	static struct platform_driver phy_berlin_sata_driver = {
	.probe = phy_berlin_sata_probe,
	.driver = {
	.name = "phy-berlin-sata",
	.of_match_table = phy_berlin_sata_of_match,
	},
	};
	module_platform_driver(phy_berlin_sata_driver);

	MODULE_DESCRIPTION("Marvell Berlin SATA PHY driver");
	MODULE_AUTHOR("Antoine Ténart <antoine.tenart@free-electrons.com>");
	MODULE_LICENSE("GPL v2");