|  | /* | 
|  | * LP5562 LED driver | 
|  | * | 
|  | * Copyright (C) 2013 Texas Instruments | 
|  | * | 
|  | * Author: Milo(Woogyom) Kim <milo.kim@ti.com> | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/delay.h> | 
|  | #include <linux/firmware.h> | 
|  | #include <linux/i2c.h> | 
|  | #include <linux/leds.h> | 
|  | #include <linux/module.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/of.h> | 
|  | #include <linux/platform_data/leds-lp55xx.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include "leds-lp55xx-common.h" | 
|  |  | 
|  | #define LP5562_PROGRAM_LENGTH		32 | 
|  | #define LP5562_MAX_LEDS			4 | 
|  |  | 
|  | /* ENABLE Register 00h */ | 
|  | #define LP5562_REG_ENABLE		0x00 | 
|  | #define LP5562_EXEC_ENG1_M		0x30 | 
|  | #define LP5562_EXEC_ENG2_M		0x0C | 
|  | #define LP5562_EXEC_ENG3_M		0x03 | 
|  | #define LP5562_EXEC_M			0x3F | 
|  | #define LP5562_MASTER_ENABLE		0x40	/* Chip master enable */ | 
|  | #define LP5562_LOGARITHMIC_PWM		0x80	/* Logarithmic PWM adjustment */ | 
|  | #define LP5562_EXEC_RUN			0x2A | 
|  | #define LP5562_ENABLE_DEFAULT	\ | 
|  | (LP5562_MASTER_ENABLE | LP5562_LOGARITHMIC_PWM) | 
|  | #define LP5562_ENABLE_RUN_PROGRAM	\ | 
|  | (LP5562_ENABLE_DEFAULT | LP5562_EXEC_RUN) | 
|  |  | 
|  | /* OPMODE Register 01h */ | 
|  | #define LP5562_REG_OP_MODE		0x01 | 
|  | #define LP5562_MODE_ENG1_M		0x30 | 
|  | #define LP5562_MODE_ENG2_M		0x0C | 
|  | #define LP5562_MODE_ENG3_M		0x03 | 
|  | #define LP5562_LOAD_ENG1		0x10 | 
|  | #define LP5562_LOAD_ENG2		0x04 | 
|  | #define LP5562_LOAD_ENG3		0x01 | 
|  | #define LP5562_RUN_ENG1			0x20 | 
|  | #define LP5562_RUN_ENG2			0x08 | 
|  | #define LP5562_RUN_ENG3			0x02 | 
|  | #define LP5562_ENG1_IS_LOADING(mode)	\ | 
|  | ((mode & LP5562_MODE_ENG1_M) == LP5562_LOAD_ENG1) | 
|  | #define LP5562_ENG2_IS_LOADING(mode)	\ | 
|  | ((mode & LP5562_MODE_ENG2_M) == LP5562_LOAD_ENG2) | 
|  | #define LP5562_ENG3_IS_LOADING(mode)	\ | 
|  | ((mode & LP5562_MODE_ENG3_M) == LP5562_LOAD_ENG3) | 
|  |  | 
|  | /* BRIGHTNESS Registers */ | 
|  | #define LP5562_REG_R_PWM		0x04 | 
|  | #define LP5562_REG_G_PWM		0x03 | 
|  | #define LP5562_REG_B_PWM		0x02 | 
|  | #define LP5562_REG_W_PWM		0x0E | 
|  |  | 
|  | /* CURRENT Registers */ | 
|  | #define LP5562_REG_R_CURRENT		0x07 | 
|  | #define LP5562_REG_G_CURRENT		0x06 | 
|  | #define LP5562_REG_B_CURRENT		0x05 | 
|  | #define LP5562_REG_W_CURRENT		0x0F | 
|  |  | 
|  | /* CONFIG Register 08h */ | 
|  | #define LP5562_REG_CONFIG		0x08 | 
|  | #define LP5562_PWM_HF			0x40 | 
|  | #define LP5562_PWRSAVE_EN		0x20 | 
|  | #define LP5562_CLK_INT			0x01	/* Internal clock */ | 
|  | #define LP5562_DEFAULT_CFG		(LP5562_PWM_HF | LP5562_PWRSAVE_EN) | 
|  |  | 
|  | /* RESET Register 0Dh */ | 
|  | #define LP5562_REG_RESET		0x0D | 
|  | #define LP5562_RESET			0xFF | 
|  |  | 
|  | /* PROGRAM ENGINE Registers */ | 
|  | #define LP5562_REG_PROG_MEM_ENG1	0x10 | 
|  | #define LP5562_REG_PROG_MEM_ENG2	0x30 | 
|  | #define LP5562_REG_PROG_MEM_ENG3	0x50 | 
|  |  | 
|  | /* LEDMAP Register 70h */ | 
|  | #define LP5562_REG_ENG_SEL		0x70 | 
|  | #define LP5562_ENG_SEL_PWM		0 | 
|  | #define LP5562_ENG_FOR_RGB_M		0x3F | 
|  | #define LP5562_ENG_SEL_RGB		0x1B	/* R:ENG1, G:ENG2, B:ENG3 */ | 
|  | #define LP5562_ENG_FOR_W_M		0xC0 | 
|  | #define LP5562_ENG1_FOR_W		0x40	/* W:ENG1 */ | 
|  | #define LP5562_ENG2_FOR_W		0x80	/* W:ENG2 */ | 
|  | #define LP5562_ENG3_FOR_W		0xC0	/* W:ENG3 */ | 
|  |  | 
|  | /* Program Commands */ | 
|  | #define LP5562_CMD_DISABLE		0x00 | 
|  | #define LP5562_CMD_LOAD			0x15 | 
|  | #define LP5562_CMD_RUN			0x2A | 
|  | #define LP5562_CMD_DIRECT		0x3F | 
|  | #define LP5562_PATTERN_OFF		0 | 
|  |  | 
|  | static inline void lp5562_wait_opmode_done(void) | 
|  | { | 
|  | /* operation mode change needs to be longer than 153 us */ | 
|  | usleep_range(200, 300); | 
|  | } | 
|  |  | 
|  | static inline void lp5562_wait_enable_done(void) | 
|  | { | 
|  | /* it takes more 488 us to update ENABLE register */ | 
|  | usleep_range(500, 600); | 
|  | } | 
|  |  | 
|  | static void lp5562_set_led_current(struct lp55xx_led *led, u8 led_current) | 
|  | { | 
|  | u8 addr[] = { | 
|  | LP5562_REG_R_CURRENT, | 
|  | LP5562_REG_G_CURRENT, | 
|  | LP5562_REG_B_CURRENT, | 
|  | LP5562_REG_W_CURRENT, | 
|  | }; | 
|  |  | 
|  | led->led_current = led_current; | 
|  | lp55xx_write(led->chip, addr[led->chan_nr], led_current); | 
|  | } | 
|  |  | 
|  | static void lp5562_load_engine(struct lp55xx_chip *chip) | 
|  | { | 
|  | enum lp55xx_engine_index idx = chip->engine_idx; | 
|  | u8 mask[] = { | 
|  | [LP55XX_ENGINE_1] = LP5562_MODE_ENG1_M, | 
|  | [LP55XX_ENGINE_2] = LP5562_MODE_ENG2_M, | 
|  | [LP55XX_ENGINE_3] = LP5562_MODE_ENG3_M, | 
|  | }; | 
|  |  | 
|  | u8 val[] = { | 
|  | [LP55XX_ENGINE_1] = LP5562_LOAD_ENG1, | 
|  | [LP55XX_ENGINE_2] = LP5562_LOAD_ENG2, | 
|  | [LP55XX_ENGINE_3] = LP5562_LOAD_ENG3, | 
|  | }; | 
|  |  | 
|  | lp55xx_update_bits(chip, LP5562_REG_OP_MODE, mask[idx], val[idx]); | 
|  |  | 
|  | lp5562_wait_opmode_done(); | 
|  | } | 
|  |  | 
|  | static void lp5562_stop_engine(struct lp55xx_chip *chip) | 
|  | { | 
|  | lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DISABLE); | 
|  | lp5562_wait_opmode_done(); | 
|  | } | 
|  |  | 
|  | static void lp5562_run_engine(struct lp55xx_chip *chip, bool start) | 
|  | { | 
|  | int ret; | 
|  | u8 mode; | 
|  | u8 exec; | 
|  |  | 
|  | /* stop engine */ | 
|  | if (!start) { | 
|  | lp55xx_write(chip, LP5562_REG_ENABLE, LP5562_ENABLE_DEFAULT); | 
|  | lp5562_wait_enable_done(); | 
|  | lp5562_stop_engine(chip); | 
|  | lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM); | 
|  | lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT); | 
|  | lp5562_wait_opmode_done(); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * To run the engine, | 
|  | * operation mode and enable register should updated at the same time | 
|  | */ | 
|  |  | 
|  | ret = lp55xx_read(chip, LP5562_REG_OP_MODE, &mode); | 
|  | if (ret) | 
|  | return; | 
|  |  | 
|  | ret = lp55xx_read(chip, LP5562_REG_ENABLE, &exec); | 
|  | if (ret) | 
|  | return; | 
|  |  | 
|  | /* change operation mode to RUN only when each engine is loading */ | 
|  | if (LP5562_ENG1_IS_LOADING(mode)) { | 
|  | mode = (mode & ~LP5562_MODE_ENG1_M) | LP5562_RUN_ENG1; | 
|  | exec = (exec & ~LP5562_EXEC_ENG1_M) | LP5562_RUN_ENG1; | 
|  | } | 
|  |  | 
|  | if (LP5562_ENG2_IS_LOADING(mode)) { | 
|  | mode = (mode & ~LP5562_MODE_ENG2_M) | LP5562_RUN_ENG2; | 
|  | exec = (exec & ~LP5562_EXEC_ENG2_M) | LP5562_RUN_ENG2; | 
|  | } | 
|  |  | 
|  | if (LP5562_ENG3_IS_LOADING(mode)) { | 
|  | mode = (mode & ~LP5562_MODE_ENG3_M) | LP5562_RUN_ENG3; | 
|  | exec = (exec & ~LP5562_EXEC_ENG3_M) | LP5562_RUN_ENG3; | 
|  | } | 
|  |  | 
|  | lp55xx_write(chip, LP5562_REG_OP_MODE, mode); | 
|  | lp5562_wait_opmode_done(); | 
|  |  | 
|  | lp55xx_update_bits(chip, LP5562_REG_ENABLE, LP5562_EXEC_M, exec); | 
|  | lp5562_wait_enable_done(); | 
|  | } | 
|  |  | 
|  | static int lp5562_update_firmware(struct lp55xx_chip *chip, | 
|  | const u8 *data, size_t size) | 
|  | { | 
|  | enum lp55xx_engine_index idx = chip->engine_idx; | 
|  | u8 pattern[LP5562_PROGRAM_LENGTH] = {0}; | 
|  | u8 addr[] = { | 
|  | [LP55XX_ENGINE_1] = LP5562_REG_PROG_MEM_ENG1, | 
|  | [LP55XX_ENGINE_2] = LP5562_REG_PROG_MEM_ENG2, | 
|  | [LP55XX_ENGINE_3] = LP5562_REG_PROG_MEM_ENG3, | 
|  | }; | 
|  | unsigned cmd; | 
|  | char c[3]; | 
|  | int program_size; | 
|  | int nrchars; | 
|  | int offset = 0; | 
|  | int ret; | 
|  | int i; | 
|  |  | 
|  | /* clear program memory before updating */ | 
|  | for (i = 0; i < LP5562_PROGRAM_LENGTH; i++) | 
|  | lp55xx_write(chip, addr[idx] + i, 0); | 
|  |  | 
|  | i = 0; | 
|  | while ((offset < size - 1) && (i < LP5562_PROGRAM_LENGTH)) { | 
|  | /* separate sscanfs because length is working only for %s */ | 
|  | ret = sscanf(data + offset, "%2s%n ", c, &nrchars); | 
|  | if (ret != 1) | 
|  | goto err; | 
|  |  | 
|  | ret = sscanf(c, "%2x", &cmd); | 
|  | if (ret != 1) | 
|  | goto err; | 
|  |  | 
|  | pattern[i] = (u8)cmd; | 
|  | offset += nrchars; | 
|  | i++; | 
|  | } | 
|  |  | 
|  | /* Each instruction is 16bit long. Check that length is even */ | 
|  | if (i % 2) | 
|  | goto err; | 
|  |  | 
|  | program_size = i; | 
|  | for (i = 0; i < program_size; i++) | 
|  | lp55xx_write(chip, addr[idx] + i, pattern[i]); | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err: | 
|  | dev_err(&chip->cl->dev, "wrong pattern format\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | static void lp5562_firmware_loaded(struct lp55xx_chip *chip) | 
|  | { | 
|  | const struct firmware *fw = chip->fw; | 
|  |  | 
|  | if (fw->size > LP5562_PROGRAM_LENGTH) { | 
|  | dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n", | 
|  | fw->size); | 
|  | return; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Program momery sequence | 
|  | *  1) set engine mode to "LOAD" | 
|  | *  2) write firmware data into program memory | 
|  | */ | 
|  |  | 
|  | lp5562_load_engine(chip); | 
|  | lp5562_update_firmware(chip, fw->data, fw->size); | 
|  | } | 
|  |  | 
|  | static int lp5562_post_init_device(struct lp55xx_chip *chip) | 
|  | { | 
|  | int ret; | 
|  | u8 cfg = LP5562_DEFAULT_CFG; | 
|  |  | 
|  | /* Set all PWMs to direct control mode */ | 
|  | ret = lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | lp5562_wait_opmode_done(); | 
|  |  | 
|  | /* Update configuration for the clock setting */ | 
|  | if (!lp55xx_is_extclk_used(chip)) | 
|  | cfg |= LP5562_CLK_INT; | 
|  |  | 
|  | ret = lp55xx_write(chip, LP5562_REG_CONFIG, cfg); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | /* Initialize all channels PWM to zero -> leds off */ | 
|  | lp55xx_write(chip, LP5562_REG_R_PWM, 0); | 
|  | lp55xx_write(chip, LP5562_REG_G_PWM, 0); | 
|  | lp55xx_write(chip, LP5562_REG_B_PWM, 0); | 
|  | lp55xx_write(chip, LP5562_REG_W_PWM, 0); | 
|  |  | 
|  | /* Set LED map as register PWM by default */ | 
|  | lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static int lp5562_led_brightness(struct lp55xx_led *led) | 
|  | { | 
|  | struct lp55xx_chip *chip = led->chip; | 
|  | u8 addr[] = { | 
|  | LP5562_REG_R_PWM, | 
|  | LP5562_REG_G_PWM, | 
|  | LP5562_REG_B_PWM, | 
|  | LP5562_REG_W_PWM, | 
|  | }; | 
|  | int ret; | 
|  |  | 
|  | mutex_lock(&chip->lock); | 
|  | ret = lp55xx_write(chip, addr[led->chan_nr], led->brightness); | 
|  | mutex_unlock(&chip->lock); | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static void lp5562_write_program_memory(struct lp55xx_chip *chip, | 
|  | u8 base, const u8 *rgb, int size) | 
|  | { | 
|  | int i; | 
|  |  | 
|  | if (!rgb || size <= 0) | 
|  | return; | 
|  |  | 
|  | for (i = 0; i < size; i++) | 
|  | lp55xx_write(chip, base + i, *(rgb + i)); | 
|  |  | 
|  | lp55xx_write(chip, base + i, 0); | 
|  | lp55xx_write(chip, base + i + 1, 0); | 
|  | } | 
|  |  | 
|  | /* check the size of program count */ | 
|  | static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn) | 
|  | { | 
|  | return ptn->size_r >= LP5562_PROGRAM_LENGTH || | 
|  | ptn->size_g >= LP5562_PROGRAM_LENGTH || | 
|  | ptn->size_b >= LP5562_PROGRAM_LENGTH; | 
|  | } | 
|  |  | 
|  | static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode) | 
|  | { | 
|  | struct lp55xx_predef_pattern *ptn; | 
|  | int i; | 
|  |  | 
|  | if (mode == LP5562_PATTERN_OFF) { | 
|  | lp5562_run_engine(chip, false); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | ptn = chip->pdata->patterns + (mode - 1); | 
|  | if (!ptn || _is_pc_overflow(ptn)) { | 
|  | dev_err(&chip->cl->dev, "invalid pattern data\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | lp5562_stop_engine(chip); | 
|  |  | 
|  | /* Set LED map as RGB */ | 
|  | lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_RGB); | 
|  |  | 
|  | /* Load engines */ | 
|  | for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) { | 
|  | chip->engine_idx = i; | 
|  | lp5562_load_engine(chip); | 
|  | } | 
|  |  | 
|  | /* Clear program registers */ | 
|  | lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1, 0); | 
|  | lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1 + 1, 0); | 
|  | lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2, 0); | 
|  | lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2 + 1, 0); | 
|  | lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3, 0); | 
|  | lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3 + 1, 0); | 
|  |  | 
|  | /* Program engines */ | 
|  | lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG1, | 
|  | ptn->r, ptn->size_r); | 
|  | lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG2, | 
|  | ptn->g, ptn->size_g); | 
|  | lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG3, | 
|  | ptn->b, ptn->size_b); | 
|  |  | 
|  | /* Run engines */ | 
|  | lp5562_run_engine(chip, true); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static ssize_t lp5562_store_pattern(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t len) | 
|  | { | 
|  | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | 
|  | struct lp55xx_chip *chip = led->chip; | 
|  | struct lp55xx_predef_pattern *ptn = chip->pdata->patterns; | 
|  | int num_patterns = chip->pdata->num_patterns; | 
|  | unsigned long mode; | 
|  | int ret; | 
|  |  | 
|  | ret = kstrtoul(buf, 0, &mode); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (mode > num_patterns || !ptn) | 
|  | return -EINVAL; | 
|  |  | 
|  | mutex_lock(&chip->lock); | 
|  | ret = lp5562_run_predef_led_pattern(chip, mode); | 
|  | mutex_unlock(&chip->lock); | 
|  |  | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static ssize_t lp5562_store_engine_mux(struct device *dev, | 
|  | struct device_attribute *attr, | 
|  | const char *buf, size_t len) | 
|  | { | 
|  | struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev)); | 
|  | struct lp55xx_chip *chip = led->chip; | 
|  | u8 mask; | 
|  | u8 val; | 
|  |  | 
|  | /* LED map | 
|  | * R ... Engine 1 (fixed) | 
|  | * G ... Engine 2 (fixed) | 
|  | * B ... Engine 3 (fixed) | 
|  | * W ... Engine 1 or 2 or 3 | 
|  | */ | 
|  |  | 
|  | if (sysfs_streq(buf, "RGB")) { | 
|  | mask = LP5562_ENG_FOR_RGB_M; | 
|  | val = LP5562_ENG_SEL_RGB; | 
|  | } else if (sysfs_streq(buf, "W")) { | 
|  | enum lp55xx_engine_index idx = chip->engine_idx; | 
|  |  | 
|  | mask = LP5562_ENG_FOR_W_M; | 
|  | switch (idx) { | 
|  | case LP55XX_ENGINE_1: | 
|  | val = LP5562_ENG1_FOR_W; | 
|  | break; | 
|  | case LP55XX_ENGINE_2: | 
|  | val = LP5562_ENG2_FOR_W; | 
|  | break; | 
|  | case LP55XX_ENGINE_3: | 
|  | val = LP5562_ENG3_FOR_W; | 
|  | break; | 
|  | default: | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | } else { | 
|  | dev_err(dev, "choose RGB or W\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | mutex_lock(&chip->lock); | 
|  | lp55xx_update_bits(chip, LP5562_REG_ENG_SEL, mask, val); | 
|  | mutex_unlock(&chip->lock); | 
|  |  | 
|  | return len; | 
|  | } | 
|  |  | 
|  | static LP55XX_DEV_ATTR_WO(led_pattern, lp5562_store_pattern); | 
|  | static LP55XX_DEV_ATTR_WO(engine_mux, lp5562_store_engine_mux); | 
|  |  | 
|  | static struct attribute *lp5562_attributes[] = { | 
|  | &dev_attr_led_pattern.attr, | 
|  | &dev_attr_engine_mux.attr, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group lp5562_group = { | 
|  | .attrs = lp5562_attributes, | 
|  | }; | 
|  |  | 
|  | /* Chip specific configurations */ | 
|  | static struct lp55xx_device_config lp5562_cfg = { | 
|  | .max_channel  = LP5562_MAX_LEDS, | 
|  | .reset = { | 
|  | .addr = LP5562_REG_RESET, | 
|  | .val  = LP5562_RESET, | 
|  | }, | 
|  | .enable = { | 
|  | .addr = LP5562_REG_ENABLE, | 
|  | .val  = LP5562_ENABLE_DEFAULT, | 
|  | }, | 
|  | .post_init_device   = lp5562_post_init_device, | 
|  | .set_led_current    = lp5562_set_led_current, | 
|  | .brightness_fn      = lp5562_led_brightness, | 
|  | .run_engine         = lp5562_run_engine, | 
|  | .firmware_cb        = lp5562_firmware_loaded, | 
|  | .dev_attr_group     = &lp5562_group, | 
|  | }; | 
|  |  | 
|  | static int lp5562_probe(struct i2c_client *client, | 
|  | const struct i2c_device_id *id) | 
|  | { | 
|  | int ret; | 
|  | struct lp55xx_chip *chip; | 
|  | struct lp55xx_led *led; | 
|  | struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev); | 
|  | struct device_node *np = client->dev.of_node; | 
|  |  | 
|  | if (!pdata) { | 
|  | if (np) { | 
|  | pdata = lp55xx_of_populate_pdata(&client->dev, np); | 
|  | if (IS_ERR(pdata)) | 
|  | return PTR_ERR(pdata); | 
|  | } else { | 
|  | dev_err(&client->dev, "no platform data\n"); | 
|  | return -EINVAL; | 
|  | } | 
|  | } | 
|  |  | 
|  | chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL); | 
|  | if (!chip) | 
|  | return -ENOMEM; | 
|  |  | 
|  | led = devm_kzalloc(&client->dev, | 
|  | sizeof(*led) * pdata->num_channels, GFP_KERNEL); | 
|  | if (!led) | 
|  | return -ENOMEM; | 
|  |  | 
|  | chip->cl = client; | 
|  | chip->pdata = pdata; | 
|  | chip->cfg = &lp5562_cfg; | 
|  |  | 
|  | mutex_init(&chip->lock); | 
|  |  | 
|  | i2c_set_clientdata(client, led); | 
|  |  | 
|  | ret = lp55xx_init_device(chip); | 
|  | if (ret) | 
|  | goto err_init; | 
|  |  | 
|  | ret = lp55xx_register_leds(led, chip); | 
|  | if (ret) | 
|  | goto err_register_leds; | 
|  |  | 
|  | ret = lp55xx_register_sysfs(chip); | 
|  | if (ret) { | 
|  | dev_err(&client->dev, "registering sysfs failed\n"); | 
|  | goto err_register_sysfs; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | err_register_sysfs: | 
|  | lp55xx_unregister_leds(led, chip); | 
|  | err_register_leds: | 
|  | lp55xx_deinit_device(chip); | 
|  | err_init: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int lp5562_remove(struct i2c_client *client) | 
|  | { | 
|  | struct lp55xx_led *led = i2c_get_clientdata(client); | 
|  | struct lp55xx_chip *chip = led->chip; | 
|  |  | 
|  | lp5562_stop_engine(chip); | 
|  |  | 
|  | lp55xx_unregister_sysfs(chip); | 
|  | lp55xx_unregister_leds(led, chip); | 
|  | lp55xx_deinit_device(chip); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | static const struct i2c_device_id lp5562_id[] = { | 
|  | { "lp5562", 0 }, | 
|  | { } | 
|  | }; | 
|  | MODULE_DEVICE_TABLE(i2c, lp5562_id); | 
|  |  | 
|  | #ifdef CONFIG_OF | 
|  | static const struct of_device_id of_lp5562_leds_match[] = { | 
|  | { .compatible = "ti,lp5562", }, | 
|  | {}, | 
|  | }; | 
|  |  | 
|  | MODULE_DEVICE_TABLE(of, of_lp5562_leds_match); | 
|  | #endif | 
|  |  | 
|  | static struct i2c_driver lp5562_driver = { | 
|  | .driver = { | 
|  | .name	= "lp5562", | 
|  | .of_match_table = of_match_ptr(of_lp5562_leds_match), | 
|  | }, | 
|  | .probe		= lp5562_probe, | 
|  | .remove		= lp5562_remove, | 
|  | .id_table	= lp5562_id, | 
|  | }; | 
|  |  | 
|  | module_i2c_driver(lp5562_driver); | 
|  |  | 
|  | MODULE_DESCRIPTION("Texas Instruments LP5562 LED Driver"); | 
|  | MODULE_AUTHOR("Milo Kim"); | 
|  | MODULE_LICENSE("GPL"); |