| * Marvell Armada 370/375/380/XP thermal management |
| |
| Required properties: |
| |
| - compatible: Should be set to one of the following: |
| * marvell,armada370-thermal |
| * marvell,armada375-thermal |
| * marvell,armada380-thermal |
| * marvell,armadaxp-thermal |
| * marvell,armada-ap806-thermal |
| * marvell,armada-cp110-thermal |
| |
| - reg: Device's register space. |
| Two entries are expected, see the examples below. The first one points |
| to the status register (4B). The second one points to the control |
| registers (8B). |
| Note: The compatibles marvell,armada370-thermal, |
| marvell,armada380-thermal, and marvell,armadaxp-thermal must point to |
| "control MSB/control 1", with size of 4 (deprecated binding), or point |
| to "control LSB/control 0" with size of 8 (current binding). All other |
| compatibles must point to "control LSB/control 0" with size of 8. |
| |
| Examples: |
| |
| /* Legacy bindings */ |
| thermal@d0018300 { |
| compatible = "marvell,armada370-thermal"; |
| reg = <0xd0018300 0x4 |
| 0xd0018304 0x4>; |
| }; |
| |
| ap_thermal: thermal@6f8084 { |
| compatible = "marvell,armada-ap806-thermal"; |
| reg = <0x6f808C 0x4>, |
| <0x6f8084 0x8>; |
| }; |
