| Flexcan CAN controller on Freescale's ARM and PowerPC system-on-a-chip (SOC). |
| |
| Required properties: |
| |
| - compatible : Should be "fsl,<processor>-flexcan" |
| |
| An implementation should also claim any of the following compatibles |
| that it is fully backwards compatible with: |
| |
| - fsl,p1010-flexcan |
| |
| - reg : Offset and length of the register set for this device |
| - interrupts : Interrupt tuple for this device |
| |
| Optional properties: |
| |
| - clock-frequency : The oscillator frequency driving the flexcan device |
| |
| - xceiver-supply: Regulator that powers the CAN transceiver |
| |
| - big-endian: This means the registers of FlexCAN controller are big endian. |
| This is optional property.i.e. if this property is not present in |
| device tree node then controller is assumed to be little endian. |
| if this property is present then controller is assumed to be big |
| endian. |
| |
| Example: |
| |
| can@1c000 { |
| compatible = "fsl,p1010-flexcan"; |
| reg = <0x1c000 0x1000>; |
| interrupts = <48 0x2>; |
| interrupt-parent = <&mpic>; |
| clock-frequency = <200000000>; // filled in by bootloader |
| }; |
