| /* | |
| * MIPI DSI Bus | |
| * | |
| * Copyright (C) 2012-2013, Samsung Electronics, Co., Ltd. | |
| * Andrzej Hajda <a.hajda@samsung.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #ifndef __DRM_MIPI_DSI_H__ | |
| #define __DRM_MIPI_DSI_H__ | |
| #include <linux/device.h> | |
| struct mipi_dsi_host; | |
| struct mipi_dsi_device; | |
| /* request ACK from peripheral */ | |
| #define MIPI_DSI_MSG_REQ_ACK BIT(0) | |
| /* use Low Power Mode to transmit message */ | |
| #define MIPI_DSI_MSG_USE_LPM BIT(1) | |
| /** | |
| * struct mipi_dsi_msg - read/write DSI buffer | |
| * @channel: virtual channel id | |
| * @type: payload data type | |
| * @flags: flags controlling this message transmission | |
| * @tx_len: length of @tx_buf | |
| * @tx_buf: data to be written | |
| * @rx_len: length of @rx_buf | |
| * @rx_buf: data to be read, or NULL | |
| */ | |
| struct mipi_dsi_msg { | |
| u8 channel; | |
| u8 type; | |
| u16 flags; | |
| size_t tx_len; | |
| const void *tx_buf; | |
| size_t rx_len; | |
| void *rx_buf; | |
| }; | |
| bool mipi_dsi_packet_format_is_short(u8 type); | |
| bool mipi_dsi_packet_format_is_long(u8 type); | |
| /** | |
| * struct mipi_dsi_packet - represents a MIPI DSI packet in protocol format | |
| * @size: size (in bytes) of the packet | |
| * @header: the four bytes that make up the header (Data ID, Word Count or | |
| * Packet Data, and ECC) | |
| * @payload_length: number of bytes in the payload | |
| * @payload: a pointer to a buffer containing the payload, if any | |
| */ | |
| struct mipi_dsi_packet { | |
| size_t size; | |
| u8 header[4]; | |
| size_t payload_length; | |
| const u8 *payload; | |
| }; | |
| int mipi_dsi_create_packet(struct mipi_dsi_packet *packet, | |
| const struct mipi_dsi_msg *msg); | |
| /** | |
| * struct mipi_dsi_host_ops - DSI bus operations | |
| * @attach: attach DSI device to DSI host | |
| * @detach: detach DSI device from DSI host | |
| * @transfer: transmit a DSI packet | |
| * | |
| * DSI packets transmitted by .transfer() are passed in as mipi_dsi_msg | |
| * structures. This structure contains information about the type of packet | |
| * being transmitted as well as the transmit and receive buffers. When an | |
| * error is encountered during transmission, this function will return a | |
| * negative error code. On success it shall return the number of bytes | |
| * transmitted for write packets or the number of bytes received for read | |
| * packets. | |
| * | |
| * Note that typically DSI packet transmission is atomic, so the .transfer() | |
| * function will seldomly return anything other than the number of bytes | |
| * contained in the transmit buffer on success. | |
| */ | |
| struct mipi_dsi_host_ops { | |
| int (*attach)(struct mipi_dsi_host *host, | |
| struct mipi_dsi_device *dsi); | |
| int (*detach)(struct mipi_dsi_host *host, | |
| struct mipi_dsi_device *dsi); | |
| ssize_t (*transfer)(struct mipi_dsi_host *host, | |
| const struct mipi_dsi_msg *msg); | |
| }; | |
| /** | |
| * struct mipi_dsi_host - DSI host device | |
| * @dev: driver model device node for this DSI host | |
| * @ops: DSI host operations | |
| * @list: list management | |
| */ | |
| struct mipi_dsi_host { | |
| struct device *dev; | |
| const struct mipi_dsi_host_ops *ops; | |
| struct list_head list; | |
| }; | |
| int mipi_dsi_host_register(struct mipi_dsi_host *host); | |
| void mipi_dsi_host_unregister(struct mipi_dsi_host *host); | |
| struct mipi_dsi_host *of_find_mipi_dsi_host_by_node(struct device_node *node); | |
| /* DSI mode flags */ | |
| /* video mode */ | |
| #define MIPI_DSI_MODE_VIDEO BIT(0) | |
| /* video burst mode */ | |
| #define MIPI_DSI_MODE_VIDEO_BURST BIT(1) | |
| /* video pulse mode */ | |
| #define MIPI_DSI_MODE_VIDEO_SYNC_PULSE BIT(2) | |
| /* enable auto vertical count mode */ | |
| #define MIPI_DSI_MODE_VIDEO_AUTO_VERT BIT(3) | |
| /* enable hsync-end packets in vsync-pulse and v-porch area */ | |
| #define MIPI_DSI_MODE_VIDEO_HSE BIT(4) | |
| /* disable hfront-porch area */ | |
| #define MIPI_DSI_MODE_VIDEO_HFP BIT(5) | |
| /* disable hback-porch area */ | |
| #define MIPI_DSI_MODE_VIDEO_HBP BIT(6) | |
| /* disable hsync-active area */ | |
| #define MIPI_DSI_MODE_VIDEO_HSA BIT(7) | |
| /* flush display FIFO on vsync pulse */ | |
| #define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8) | |
| /* disable EoT packets in HS mode */ | |
| #define MIPI_DSI_MODE_EOT_PACKET BIT(9) | |
| /* device supports non-continuous clock behavior (DSI spec 5.6.1) */ | |
| #define MIPI_DSI_CLOCK_NON_CONTINUOUS BIT(10) | |
| /* transmit data in low power */ | |
| #define MIPI_DSI_MODE_LPM BIT(11) | |
| enum mipi_dsi_pixel_format { | |
| MIPI_DSI_FMT_RGB888, | |
| MIPI_DSI_FMT_RGB666, | |
| MIPI_DSI_FMT_RGB666_PACKED, | |
| MIPI_DSI_FMT_RGB565, | |
| }; | |
| #define DSI_DEV_NAME_SIZE 20 | |
| /** | |
| * struct mipi_dsi_device_info - template for creating a mipi_dsi_device | |
| * @type: DSI peripheral chip type | |
| * @channel: DSI virtual channel assigned to peripheral | |
| * @node: pointer to OF device node or NULL | |
| * | |
| * This is populated and passed to mipi_dsi_device_new to create a new | |
| * DSI device | |
| */ | |
| struct mipi_dsi_device_info { | |
| char type[DSI_DEV_NAME_SIZE]; | |
| u32 channel; | |
| struct device_node *node; | |
| }; | |
| /** | |
| * struct mipi_dsi_device - DSI peripheral device | |
| * @host: DSI host for this peripheral | |
| * @dev: driver model device node for this peripheral | |
| * @name: DSI peripheral chip type | |
| * @channel: virtual channel assigned to the peripheral | |
| * @format: pixel format for video mode | |
| * @lanes: number of active data lanes | |
| * @mode_flags: DSI operation mode related flags | |
| */ | |
| struct mipi_dsi_device { | |
| struct mipi_dsi_host *host; | |
| struct device dev; | |
| char name[DSI_DEV_NAME_SIZE]; | |
| unsigned int channel; | |
| unsigned int lanes; | |
| enum mipi_dsi_pixel_format format; | |
| unsigned long mode_flags; | |
| }; | |
| #define MIPI_DSI_MODULE_PREFIX "mipi-dsi:" | |
| static inline struct mipi_dsi_device *to_mipi_dsi_device(struct device *dev) | |
| { | |
| return container_of(dev, struct mipi_dsi_device, dev); | |
| } | |
| /** | |
| * mipi_dsi_pixel_format_to_bpp - obtain the number of bits per pixel for any | |
| * given pixel format defined by the MIPI DSI | |
| * specification | |
| * @fmt: MIPI DSI pixel format | |
| * | |
| * Returns: The number of bits per pixel of the given pixel format. | |
| */ | |
| static inline int mipi_dsi_pixel_format_to_bpp(enum mipi_dsi_pixel_format fmt) | |
| { | |
| switch (fmt) { | |
| case MIPI_DSI_FMT_RGB888: | |
| case MIPI_DSI_FMT_RGB666: | |
| return 24; | |
| case MIPI_DSI_FMT_RGB666_PACKED: | |
| return 18; | |
| case MIPI_DSI_FMT_RGB565: | |
| return 16; | |
| } | |
| return -EINVAL; | |
| } | |
| struct mipi_dsi_device * | |
| mipi_dsi_device_register_full(struct mipi_dsi_host *host, | |
| const struct mipi_dsi_device_info *info); | |
| void mipi_dsi_device_unregister(struct mipi_dsi_device *dsi); | |
| struct mipi_dsi_device *of_find_mipi_dsi_device_by_node(struct device_node *np); | |
| int mipi_dsi_attach(struct mipi_dsi_device *dsi); | |
| int mipi_dsi_detach(struct mipi_dsi_device *dsi); | |
| int mipi_dsi_shutdown_peripheral(struct mipi_dsi_device *dsi); | |
| int mipi_dsi_turn_on_peripheral(struct mipi_dsi_device *dsi); | |
| int mipi_dsi_set_maximum_return_packet_size(struct mipi_dsi_device *dsi, | |
| u16 value); | |
| ssize_t mipi_dsi_generic_write(struct mipi_dsi_device *dsi, const void *payload, | |
| size_t size); | |
| ssize_t mipi_dsi_generic_read(struct mipi_dsi_device *dsi, const void *params, | |
| size_t num_params, void *data, size_t size); | |
| /** | |
| * enum mipi_dsi_dcs_tear_mode - Tearing Effect Output Line mode | |
| * @MIPI_DSI_DCS_TEAR_MODE_VBLANK: the TE output line consists of V-Blanking | |
| * information only | |
| * @MIPI_DSI_DCS_TEAR_MODE_VHBLANK : the TE output line consists of both | |
| * V-Blanking and H-Blanking information | |
| */ | |
| enum mipi_dsi_dcs_tear_mode { | |
| MIPI_DSI_DCS_TEAR_MODE_VBLANK, | |
| MIPI_DSI_DCS_TEAR_MODE_VHBLANK, | |
| }; | |
| #define MIPI_DSI_DCS_POWER_MODE_DISPLAY (1 << 2) | |
| #define MIPI_DSI_DCS_POWER_MODE_NORMAL (1 << 3) | |
| #define MIPI_DSI_DCS_POWER_MODE_SLEEP (1 << 4) | |
| #define MIPI_DSI_DCS_POWER_MODE_PARTIAL (1 << 5) | |
| #define MIPI_DSI_DCS_POWER_MODE_IDLE (1 << 6) | |
| ssize_t mipi_dsi_dcs_write_buffer(struct mipi_dsi_device *dsi, | |
| const void *data, size_t len); | |
| ssize_t mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, u8 cmd, | |
| const void *data, size_t len); | |
| ssize_t mipi_dsi_dcs_read(struct mipi_dsi_device *dsi, u8 cmd, void *data, | |
| size_t len); | |
| int mipi_dsi_dcs_nop(struct mipi_dsi_device *dsi); | |
| int mipi_dsi_dcs_soft_reset(struct mipi_dsi_device *dsi); | |
| int mipi_dsi_dcs_get_power_mode(struct mipi_dsi_device *dsi, u8 *mode); | |
| int mipi_dsi_dcs_get_pixel_format(struct mipi_dsi_device *dsi, u8 *format); | |
| int mipi_dsi_dcs_enter_sleep_mode(struct mipi_dsi_device *dsi); | |
| int mipi_dsi_dcs_exit_sleep_mode(struct mipi_dsi_device *dsi); | |
| int mipi_dsi_dcs_set_display_off(struct mipi_dsi_device *dsi); | |
| int mipi_dsi_dcs_set_display_on(struct mipi_dsi_device *dsi); | |
| int mipi_dsi_dcs_set_column_address(struct mipi_dsi_device *dsi, u16 start, | |
| u16 end); | |
| int mipi_dsi_dcs_set_page_address(struct mipi_dsi_device *dsi, u16 start, | |
| u16 end); | |
| int mipi_dsi_dcs_set_tear_off(struct mipi_dsi_device *dsi); | |
| int mipi_dsi_dcs_set_tear_on(struct mipi_dsi_device *dsi, | |
| enum mipi_dsi_dcs_tear_mode mode); | |
| int mipi_dsi_dcs_set_pixel_format(struct mipi_dsi_device *dsi, u8 format); | |
| int mipi_dsi_dcs_set_tear_scanline(struct mipi_dsi_device *dsi, u16 scanline); | |
| int mipi_dsi_dcs_set_display_brightness(struct mipi_dsi_device *dsi, | |
| u16 brightness); | |
| int mipi_dsi_dcs_get_display_brightness(struct mipi_dsi_device *dsi, | |
| u16 *brightness); | |
| /** | |
| * struct mipi_dsi_driver - DSI driver | |
| * @driver: device driver model driver | |
| * @probe: callback for device binding | |
| * @remove: callback for device unbinding | |
| * @shutdown: called at shutdown time to quiesce the device | |
| */ | |
| struct mipi_dsi_driver { | |
| struct device_driver driver; | |
| int(*probe)(struct mipi_dsi_device *dsi); | |
| int(*remove)(struct mipi_dsi_device *dsi); | |
| void (*shutdown)(struct mipi_dsi_device *dsi); | |
| }; | |
| static inline struct mipi_dsi_driver * | |
| to_mipi_dsi_driver(struct device_driver *driver) | |
| { | |
| return container_of(driver, struct mipi_dsi_driver, driver); | |
| } | |
| static inline void *mipi_dsi_get_drvdata(const struct mipi_dsi_device *dsi) | |
| { | |
| return dev_get_drvdata(&dsi->dev); | |
| } | |
| static inline void mipi_dsi_set_drvdata(struct mipi_dsi_device *dsi, void *data) | |
| { | |
| dev_set_drvdata(&dsi->dev, data); | |
| } | |
| int mipi_dsi_driver_register_full(struct mipi_dsi_driver *driver, | |
| struct module *owner); | |
| void mipi_dsi_driver_unregister(struct mipi_dsi_driver *driver); | |
| #define mipi_dsi_driver_register(driver) \ | |
| mipi_dsi_driver_register_full(driver, THIS_MODULE) | |
| #define module_mipi_dsi_driver(__mipi_dsi_driver) \ | |
| module_driver(__mipi_dsi_driver, mipi_dsi_driver_register, \ | |
| mipi_dsi_driver_unregister) | |
| #endif /* __DRM_MIPI_DSI__ */ |