| /* | |
| * Atheros AR933X SoC built-in UART driver | |
| * | |
| * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> | |
| * | |
| * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License version 2 as published | |
| * by the Free Software Foundation. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/ioport.h> | |
| #include <linux/init.h> | |
| #include <linux/console.h> | |
| #include <linux/sysrq.h> | |
| #include <linux/delay.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/of.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/tty.h> | |
| #include <linux/tty_flip.h> | |
| #include <linux/serial_core.h> | |
| #include <linux/serial.h> | |
| #include <linux/slab.h> | |
| #include <linux/io.h> | |
| #include <linux/irq.h> | |
| #include <linux/clk.h> | |
| #include <asm/div64.h> | |
| #include <asm/mach-ath79/ar933x_uart.h> | |
| #define DRIVER_NAME "ar933x-uart" | |
| #define AR933X_UART_MAX_SCALE 0xff | |
| #define AR933X_UART_MAX_STEP 0xffff | |
| #define AR933X_UART_MIN_BAUD 300 | |
| #define AR933X_UART_MAX_BAUD 3000000 | |
| #define AR933X_DUMMY_STATUS_RD 0x01 | |
| static struct uart_driver ar933x_uart_driver; | |
| struct ar933x_uart_port { | |
| struct uart_port port; | |
| unsigned int ier; /* shadow Interrupt Enable Register */ | |
| unsigned int min_baud; | |
| unsigned int max_baud; | |
| struct clk *clk; | |
| }; | |
| static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up, | |
| int offset) | |
| { | |
| return readl(up->port.membase + offset); | |
| } | |
| static inline void ar933x_uart_write(struct ar933x_uart_port *up, | |
| int offset, unsigned int value) | |
| { | |
| writel(value, up->port.membase + offset); | |
| } | |
| static inline void ar933x_uart_rmw(struct ar933x_uart_port *up, | |
| unsigned int offset, | |
| unsigned int mask, | |
| unsigned int val) | |
| { | |
| unsigned int t; | |
| t = ar933x_uart_read(up, offset); | |
| t &= ~mask; | |
| t |= val; | |
| ar933x_uart_write(up, offset, t); | |
| } | |
| static inline void ar933x_uart_rmw_set(struct ar933x_uart_port *up, | |
| unsigned int offset, | |
| unsigned int val) | |
| { | |
| ar933x_uart_rmw(up, offset, 0, val); | |
| } | |
| static inline void ar933x_uart_rmw_clear(struct ar933x_uart_port *up, | |
| unsigned int offset, | |
| unsigned int val) | |
| { | |
| ar933x_uart_rmw(up, offset, val, 0); | |
| } | |
| static inline void ar933x_uart_start_tx_interrupt(struct ar933x_uart_port *up) | |
| { | |
| up->ier |= AR933X_UART_INT_TX_EMPTY; | |
| ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); | |
| } | |
| static inline void ar933x_uart_stop_tx_interrupt(struct ar933x_uart_port *up) | |
| { | |
| up->ier &= ~AR933X_UART_INT_TX_EMPTY; | |
| ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); | |
| } | |
| static inline void ar933x_uart_putc(struct ar933x_uart_port *up, int ch) | |
| { | |
| unsigned int rdata; | |
| rdata = ch & AR933X_UART_DATA_TX_RX_MASK; | |
| rdata |= AR933X_UART_DATA_TX_CSR; | |
| ar933x_uart_write(up, AR933X_UART_DATA_REG, rdata); | |
| } | |
| static unsigned int ar933x_uart_tx_empty(struct uart_port *port) | |
| { | |
| struct ar933x_uart_port *up = | |
| container_of(port, struct ar933x_uart_port, port); | |
| unsigned long flags; | |
| unsigned int rdata; | |
| spin_lock_irqsave(&up->port.lock, flags); | |
| rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG); | |
| spin_unlock_irqrestore(&up->port.lock, flags); | |
| return (rdata & AR933X_UART_DATA_TX_CSR) ? 0 : TIOCSER_TEMT; | |
| } | |
| static unsigned int ar933x_uart_get_mctrl(struct uart_port *port) | |
| { | |
| return TIOCM_CAR; | |
| } | |
| static void ar933x_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) | |
| { | |
| } | |
| static void ar933x_uart_start_tx(struct uart_port *port) | |
| { | |
| struct ar933x_uart_port *up = | |
| container_of(port, struct ar933x_uart_port, port); | |
| ar933x_uart_start_tx_interrupt(up); | |
| } | |
| static void ar933x_uart_stop_tx(struct uart_port *port) | |
| { | |
| struct ar933x_uart_port *up = | |
| container_of(port, struct ar933x_uart_port, port); | |
| ar933x_uart_stop_tx_interrupt(up); | |
| } | |
| static void ar933x_uart_stop_rx(struct uart_port *port) | |
| { | |
| struct ar933x_uart_port *up = | |
| container_of(port, struct ar933x_uart_port, port); | |
| up->ier &= ~AR933X_UART_INT_RX_VALID; | |
| ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); | |
| } | |
| static void ar933x_uart_break_ctl(struct uart_port *port, int break_state) | |
| { | |
| struct ar933x_uart_port *up = | |
| container_of(port, struct ar933x_uart_port, port); | |
| unsigned long flags; | |
| spin_lock_irqsave(&up->port.lock, flags); | |
| if (break_state == -1) | |
| ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, | |
| AR933X_UART_CS_TX_BREAK); | |
| else | |
| ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG, | |
| AR933X_UART_CS_TX_BREAK); | |
| spin_unlock_irqrestore(&up->port.lock, flags); | |
| } | |
| /* | |
| * baudrate = (clk / (scale + 1)) * (step * (1 / 2^17)) | |
| */ | |
| static unsigned long ar933x_uart_get_baud(unsigned int clk, | |
| unsigned int scale, | |
| unsigned int step) | |
| { | |
| u64 t; | |
| u32 div; | |
| div = (2 << 16) * (scale + 1); | |
| t = clk; | |
| t *= step; | |
| t += (div / 2); | |
| do_div(t, div); | |
| return t; | |
| } | |
| static void ar933x_uart_get_scale_step(unsigned int clk, | |
| unsigned int baud, | |
| unsigned int *scale, | |
| unsigned int *step) | |
| { | |
| unsigned int tscale; | |
| long min_diff; | |
| *scale = 0; | |
| *step = 0; | |
| min_diff = baud; | |
| for (tscale = 0; tscale < AR933X_UART_MAX_SCALE; tscale++) { | |
| u64 tstep; | |
| int diff; | |
| tstep = baud * (tscale + 1); | |
| tstep *= (2 << 16); | |
| do_div(tstep, clk); | |
| if (tstep > AR933X_UART_MAX_STEP) | |
| break; | |
| diff = abs(ar933x_uart_get_baud(clk, tscale, tstep) - baud); | |
| if (diff < min_diff) { | |
| min_diff = diff; | |
| *scale = tscale; | |
| *step = tstep; | |
| } | |
| } | |
| } | |
| static void ar933x_uart_set_termios(struct uart_port *port, | |
| struct ktermios *new, | |
| struct ktermios *old) | |
| { | |
| struct ar933x_uart_port *up = | |
| container_of(port, struct ar933x_uart_port, port); | |
| unsigned int cs; | |
| unsigned long flags; | |
| unsigned int baud, scale, step; | |
| /* Only CS8 is supported */ | |
| new->c_cflag &= ~CSIZE; | |
| new->c_cflag |= CS8; | |
| /* Only one stop bit is supported */ | |
| new->c_cflag &= ~CSTOPB; | |
| cs = 0; | |
| if (new->c_cflag & PARENB) { | |
| if (!(new->c_cflag & PARODD)) | |
| cs |= AR933X_UART_CS_PARITY_EVEN; | |
| else | |
| cs |= AR933X_UART_CS_PARITY_ODD; | |
| } else { | |
| cs |= AR933X_UART_CS_PARITY_NONE; | |
| } | |
| /* Mark/space parity is not supported */ | |
| new->c_cflag &= ~CMSPAR; | |
| baud = uart_get_baud_rate(port, new, old, up->min_baud, up->max_baud); | |
| ar933x_uart_get_scale_step(port->uartclk, baud, &scale, &step); | |
| /* | |
| * Ok, we're now changing the port state. Do it with | |
| * interrupts disabled. | |
| */ | |
| spin_lock_irqsave(&up->port.lock, flags); | |
| /* disable the UART */ | |
| ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG, | |
| AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S); | |
| /* Update the per-port timeout. */ | |
| uart_update_timeout(port, new->c_cflag, baud); | |
| up->port.ignore_status_mask = 0; | |
| /* ignore all characters if CREAD is not set */ | |
| if ((new->c_cflag & CREAD) == 0) | |
| up->port.ignore_status_mask |= AR933X_DUMMY_STATUS_RD; | |
| ar933x_uart_write(up, AR933X_UART_CLOCK_REG, | |
| scale << AR933X_UART_CLOCK_SCALE_S | step); | |
| /* setup configuration register */ | |
| ar933x_uart_rmw(up, AR933X_UART_CS_REG, AR933X_UART_CS_PARITY_M, cs); | |
| /* enable host interrupt */ | |
| ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, | |
| AR933X_UART_CS_HOST_INT_EN); | |
| /* reenable the UART */ | |
| ar933x_uart_rmw(up, AR933X_UART_CS_REG, | |
| AR933X_UART_CS_IF_MODE_M << AR933X_UART_CS_IF_MODE_S, | |
| AR933X_UART_CS_IF_MODE_DCE << AR933X_UART_CS_IF_MODE_S); | |
| spin_unlock_irqrestore(&up->port.lock, flags); | |
| if (tty_termios_baud_rate(new)) | |
| tty_termios_encode_baud_rate(new, baud, baud); | |
| } | |
| static void ar933x_uart_rx_chars(struct ar933x_uart_port *up) | |
| { | |
| struct tty_port *port = &up->port.state->port; | |
| int max_count = 256; | |
| do { | |
| unsigned int rdata; | |
| unsigned char ch; | |
| rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG); | |
| if ((rdata & AR933X_UART_DATA_RX_CSR) == 0) | |
| break; | |
| /* remove the character from the FIFO */ | |
| ar933x_uart_write(up, AR933X_UART_DATA_REG, | |
| AR933X_UART_DATA_RX_CSR); | |
| up->port.icount.rx++; | |
| ch = rdata & AR933X_UART_DATA_TX_RX_MASK; | |
| if (uart_handle_sysrq_char(&up->port, ch)) | |
| continue; | |
| if ((up->port.ignore_status_mask & AR933X_DUMMY_STATUS_RD) == 0) | |
| tty_insert_flip_char(port, ch, TTY_NORMAL); | |
| } while (max_count-- > 0); | |
| spin_unlock(&up->port.lock); | |
| tty_flip_buffer_push(port); | |
| spin_lock(&up->port.lock); | |
| } | |
| static void ar933x_uart_tx_chars(struct ar933x_uart_port *up) | |
| { | |
| struct circ_buf *xmit = &up->port.state->xmit; | |
| int count; | |
| if (uart_tx_stopped(&up->port)) | |
| return; | |
| count = up->port.fifosize; | |
| do { | |
| unsigned int rdata; | |
| rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG); | |
| if ((rdata & AR933X_UART_DATA_TX_CSR) == 0) | |
| break; | |
| if (up->port.x_char) { | |
| ar933x_uart_putc(up, up->port.x_char); | |
| up->port.icount.tx++; | |
| up->port.x_char = 0; | |
| continue; | |
| } | |
| if (uart_circ_empty(xmit)) | |
| break; | |
| ar933x_uart_putc(up, xmit->buf[xmit->tail]); | |
| xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); | |
| up->port.icount.tx++; | |
| } while (--count > 0); | |
| if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) | |
| uart_write_wakeup(&up->port); | |
| if (!uart_circ_empty(xmit)) | |
| ar933x_uart_start_tx_interrupt(up); | |
| } | |
| static irqreturn_t ar933x_uart_interrupt(int irq, void *dev_id) | |
| { | |
| struct ar933x_uart_port *up = dev_id; | |
| unsigned int status; | |
| status = ar933x_uart_read(up, AR933X_UART_CS_REG); | |
| if ((status & AR933X_UART_CS_HOST_INT) == 0) | |
| return IRQ_NONE; | |
| spin_lock(&up->port.lock); | |
| status = ar933x_uart_read(up, AR933X_UART_INT_REG); | |
| status &= ar933x_uart_read(up, AR933X_UART_INT_EN_REG); | |
| if (status & AR933X_UART_INT_RX_VALID) { | |
| ar933x_uart_write(up, AR933X_UART_INT_REG, | |
| AR933X_UART_INT_RX_VALID); | |
| ar933x_uart_rx_chars(up); | |
| } | |
| if (status & AR933X_UART_INT_TX_EMPTY) { | |
| ar933x_uart_write(up, AR933X_UART_INT_REG, | |
| AR933X_UART_INT_TX_EMPTY); | |
| ar933x_uart_stop_tx_interrupt(up); | |
| ar933x_uart_tx_chars(up); | |
| } | |
| spin_unlock(&up->port.lock); | |
| return IRQ_HANDLED; | |
| } | |
| static int ar933x_uart_startup(struct uart_port *port) | |
| { | |
| struct ar933x_uart_port *up = | |
| container_of(port, struct ar933x_uart_port, port); | |
| unsigned long flags; | |
| int ret; | |
| ret = request_irq(up->port.irq, ar933x_uart_interrupt, | |
| up->port.irqflags, dev_name(up->port.dev), up); | |
| if (ret) | |
| return ret; | |
| spin_lock_irqsave(&up->port.lock, flags); | |
| /* Enable HOST interrupts */ | |
| ar933x_uart_rmw_set(up, AR933X_UART_CS_REG, | |
| AR933X_UART_CS_HOST_INT_EN); | |
| /* Enable RX interrupts */ | |
| up->ier = AR933X_UART_INT_RX_VALID; | |
| ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); | |
| spin_unlock_irqrestore(&up->port.lock, flags); | |
| return 0; | |
| } | |
| static void ar933x_uart_shutdown(struct uart_port *port) | |
| { | |
| struct ar933x_uart_port *up = | |
| container_of(port, struct ar933x_uart_port, port); | |
| /* Disable all interrupts */ | |
| up->ier = 0; | |
| ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier); | |
| /* Disable break condition */ | |
| ar933x_uart_rmw_clear(up, AR933X_UART_CS_REG, | |
| AR933X_UART_CS_TX_BREAK); | |
| free_irq(up->port.irq, up); | |
| } | |
| static const char *ar933x_uart_type(struct uart_port *port) | |
| { | |
| return (port->type == PORT_AR933X) ? "AR933X UART" : NULL; | |
| } | |
| static void ar933x_uart_release_port(struct uart_port *port) | |
| { | |
| /* Nothing to release ... */ | |
| } | |
| static int ar933x_uart_request_port(struct uart_port *port) | |
| { | |
| /* UARTs always present */ | |
| return 0; | |
| } | |
| static void ar933x_uart_config_port(struct uart_port *port, int flags) | |
| { | |
| if (flags & UART_CONFIG_TYPE) | |
| port->type = PORT_AR933X; | |
| } | |
| static int ar933x_uart_verify_port(struct uart_port *port, | |
| struct serial_struct *ser) | |
| { | |
| struct ar933x_uart_port *up = | |
| container_of(port, struct ar933x_uart_port, port); | |
| if (ser->type != PORT_UNKNOWN && | |
| ser->type != PORT_AR933X) | |
| return -EINVAL; | |
| if (ser->irq < 0 || ser->irq >= NR_IRQS) | |
| return -EINVAL; | |
| if (ser->baud_base < up->min_baud || | |
| ser->baud_base > up->max_baud) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| static const struct uart_ops ar933x_uart_ops = { | |
| .tx_empty = ar933x_uart_tx_empty, | |
| .set_mctrl = ar933x_uart_set_mctrl, | |
| .get_mctrl = ar933x_uart_get_mctrl, | |
| .stop_tx = ar933x_uart_stop_tx, | |
| .start_tx = ar933x_uart_start_tx, | |
| .stop_rx = ar933x_uart_stop_rx, | |
| .break_ctl = ar933x_uart_break_ctl, | |
| .startup = ar933x_uart_startup, | |
| .shutdown = ar933x_uart_shutdown, | |
| .set_termios = ar933x_uart_set_termios, | |
| .type = ar933x_uart_type, | |
| .release_port = ar933x_uart_release_port, | |
| .request_port = ar933x_uart_request_port, | |
| .config_port = ar933x_uart_config_port, | |
| .verify_port = ar933x_uart_verify_port, | |
| }; | |
| #ifdef CONFIG_SERIAL_AR933X_CONSOLE | |
| static struct ar933x_uart_port * | |
| ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS]; | |
| static void ar933x_uart_wait_xmitr(struct ar933x_uart_port *up) | |
| { | |
| unsigned int status; | |
| unsigned int timeout = 60000; | |
| /* Wait up to 60ms for the character(s) to be sent. */ | |
| do { | |
| status = ar933x_uart_read(up, AR933X_UART_DATA_REG); | |
| if (--timeout == 0) | |
| break; | |
| udelay(1); | |
| } while ((status & AR933X_UART_DATA_TX_CSR) == 0); | |
| } | |
| static void ar933x_uart_console_putchar(struct uart_port *port, int ch) | |
| { | |
| struct ar933x_uart_port *up = | |
| container_of(port, struct ar933x_uart_port, port); | |
| ar933x_uart_wait_xmitr(up); | |
| ar933x_uart_putc(up, ch); | |
| } | |
| static void ar933x_uart_console_write(struct console *co, const char *s, | |
| unsigned int count) | |
| { | |
| struct ar933x_uart_port *up = ar933x_console_ports[co->index]; | |
| unsigned long flags; | |
| unsigned int int_en; | |
| int locked = 1; | |
| local_irq_save(flags); | |
| if (up->port.sysrq) | |
| locked = 0; | |
| else if (oops_in_progress) | |
| locked = spin_trylock(&up->port.lock); | |
| else | |
| spin_lock(&up->port.lock); | |
| /* | |
| * First save the IER then disable the interrupts | |
| */ | |
| int_en = ar933x_uart_read(up, AR933X_UART_INT_EN_REG); | |
| ar933x_uart_write(up, AR933X_UART_INT_EN_REG, 0); | |
| uart_console_write(&up->port, s, count, ar933x_uart_console_putchar); | |
| /* | |
| * Finally, wait for transmitter to become empty | |
| * and restore the IER | |
| */ | |
| ar933x_uart_wait_xmitr(up); | |
| ar933x_uart_write(up, AR933X_UART_INT_EN_REG, int_en); | |
| ar933x_uart_write(up, AR933X_UART_INT_REG, AR933X_UART_INT_ALLINTS); | |
| if (locked) | |
| spin_unlock(&up->port.lock); | |
| local_irq_restore(flags); | |
| } | |
| static int ar933x_uart_console_setup(struct console *co, char *options) | |
| { | |
| struct ar933x_uart_port *up; | |
| int baud = 115200; | |
| int bits = 8; | |
| int parity = 'n'; | |
| int flow = 'n'; | |
| if (co->index < 0 || co->index >= CONFIG_SERIAL_AR933X_NR_UARTS) | |
| return -EINVAL; | |
| up = ar933x_console_ports[co->index]; | |
| if (!up) | |
| return -ENODEV; | |
| if (options) | |
| uart_parse_options(options, &baud, &parity, &bits, &flow); | |
| return uart_set_options(&up->port, co, baud, parity, bits, flow); | |
| } | |
| static struct console ar933x_uart_console = { | |
| .name = "ttyATH", | |
| .write = ar933x_uart_console_write, | |
| .device = uart_console_device, | |
| .setup = ar933x_uart_console_setup, | |
| .flags = CON_PRINTBUFFER, | |
| .index = -1, | |
| .data = &ar933x_uart_driver, | |
| }; | |
| #endif /* CONFIG_SERIAL_AR933X_CONSOLE */ | |
| static struct uart_driver ar933x_uart_driver = { | |
| .owner = THIS_MODULE, | |
| .driver_name = DRIVER_NAME, | |
| .dev_name = "ttyATH", | |
| .nr = CONFIG_SERIAL_AR933X_NR_UARTS, | |
| .cons = NULL, /* filled in runtime */ | |
| }; | |
| static int ar933x_uart_probe(struct platform_device *pdev) | |
| { | |
| struct ar933x_uart_port *up; | |
| struct uart_port *port; | |
| struct resource *mem_res; | |
| struct resource *irq_res; | |
| struct device_node *np; | |
| unsigned int baud; | |
| int id; | |
| int ret; | |
| np = pdev->dev.of_node; | |
| if (IS_ENABLED(CONFIG_OF) && np) { | |
| id = of_alias_get_id(np, "serial"); | |
| if (id < 0) { | |
| dev_err(&pdev->dev, "unable to get alias id, err=%d\n", | |
| id); | |
| return id; | |
| } | |
| } else { | |
| id = pdev->id; | |
| if (id == -1) | |
| id = 0; | |
| } | |
| if (id >= CONFIG_SERIAL_AR933X_NR_UARTS) | |
| return -EINVAL; | |
| irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); | |
| if (!irq_res) { | |
| dev_err(&pdev->dev, "no IRQ resource\n"); | |
| return -EINVAL; | |
| } | |
| up = devm_kzalloc(&pdev->dev, sizeof(struct ar933x_uart_port), | |
| GFP_KERNEL); | |
| if (!up) | |
| return -ENOMEM; | |
| up->clk = devm_clk_get(&pdev->dev, "uart"); | |
| if (IS_ERR(up->clk)) { | |
| dev_err(&pdev->dev, "unable to get UART clock\n"); | |
| return PTR_ERR(up->clk); | |
| } | |
| port = &up->port; | |
| mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); | |
| port->membase = devm_ioremap_resource(&pdev->dev, mem_res); | |
| if (IS_ERR(port->membase)) | |
| return PTR_ERR(port->membase); | |
| ret = clk_prepare_enable(up->clk); | |
| if (ret) | |
| return ret; | |
| port->uartclk = clk_get_rate(up->clk); | |
| if (!port->uartclk) { | |
| ret = -EINVAL; | |
| goto err_disable_clk; | |
| } | |
| port->mapbase = mem_res->start; | |
| port->line = id; | |
| port->irq = irq_res->start; | |
| port->dev = &pdev->dev; | |
| port->type = PORT_AR933X; | |
| port->iotype = UPIO_MEM32; | |
| port->regshift = 2; | |
| port->fifosize = AR933X_UART_FIFO_SIZE; | |
| port->ops = &ar933x_uart_ops; | |
| baud = ar933x_uart_get_baud(port->uartclk, AR933X_UART_MAX_SCALE, 1); | |
| up->min_baud = max_t(unsigned int, baud, AR933X_UART_MIN_BAUD); | |
| baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP); | |
| up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD); | |
| #ifdef CONFIG_SERIAL_AR933X_CONSOLE | |
| ar933x_console_ports[up->port.line] = up; | |
| #endif | |
| ret = uart_add_one_port(&ar933x_uart_driver, &up->port); | |
| if (ret) | |
| goto err_disable_clk; | |
| platform_set_drvdata(pdev, up); | |
| return 0; | |
| err_disable_clk: | |
| clk_disable_unprepare(up->clk); | |
| return ret; | |
| } | |
| static int ar933x_uart_remove(struct platform_device *pdev) | |
| { | |
| struct ar933x_uart_port *up; | |
| up = platform_get_drvdata(pdev); | |
| if (up) { | |
| uart_remove_one_port(&ar933x_uart_driver, &up->port); | |
| clk_disable_unprepare(up->clk); | |
| } | |
| return 0; | |
| } | |
| #ifdef CONFIG_OF | |
| static const struct of_device_id ar933x_uart_of_ids[] = { | |
| { .compatible = "qca,ar9330-uart" }, | |
| {}, | |
| }; | |
| MODULE_DEVICE_TABLE(of, ar933x_uart_of_ids); | |
| #endif | |
| static struct platform_driver ar933x_uart_platform_driver = { | |
| .probe = ar933x_uart_probe, | |
| .remove = ar933x_uart_remove, | |
| .driver = { | |
| .name = DRIVER_NAME, | |
| .of_match_table = of_match_ptr(ar933x_uart_of_ids), | |
| }, | |
| }; | |
| static int __init ar933x_uart_init(void) | |
| { | |
| int ret; | |
| #ifdef CONFIG_SERIAL_AR933X_CONSOLE | |
| ar933x_uart_driver.cons = &ar933x_uart_console; | |
| #endif | |
| ret = uart_register_driver(&ar933x_uart_driver); | |
| if (ret) | |
| goto err_out; | |
| ret = platform_driver_register(&ar933x_uart_platform_driver); | |
| if (ret) | |
| goto err_unregister_uart_driver; | |
| return 0; | |
| err_unregister_uart_driver: | |
| uart_unregister_driver(&ar933x_uart_driver); | |
| err_out: | |
| return ret; | |
| } | |
| static void __exit ar933x_uart_exit(void) | |
| { | |
| platform_driver_unregister(&ar933x_uart_platform_driver); | |
| uart_unregister_driver(&ar933x_uart_driver); | |
| } | |
| module_init(ar933x_uart_init); | |
| module_exit(ar933x_uart_exit); | |
| MODULE_DESCRIPTION("Atheros AR933X UART driver"); | |
| MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); | |
| MODULE_LICENSE("GPL v2"); | |
| MODULE_ALIAS("platform:" DRIVER_NAME); |