| menuconfig REGULATOR | |
| bool "Voltage and Current Regulator Support" | |
| help | |
| Generic Voltage and Current Regulator support. | |
| This framework is designed to provide a generic interface to voltage | |
| and current regulators within the Linux kernel. It's intended to | |
| provide voltage and current control to client or consumer drivers and | |
| also provide status information to user space applications through a | |
| sysfs interface. | |
| The intention is to allow systems to dynamically control regulator | |
| output in order to save power and prolong battery life. This applies | |
| to both voltage regulators (where voltage output is controllable) and | |
| current sinks (where current output is controllable). | |
| This framework safely compiles out if not selected so that client | |
| drivers can still be used in systems with no software controllable | |
| regulators. | |
| If unsure, say no. | |
| if REGULATOR | |
| config REGULATOR_DEBUG | |
| bool "Regulator debug support" | |
| help | |
| Say yes here to enable debugging support. | |
| config REGULATOR_FIXED_VOLTAGE | |
| tristate "Fixed voltage regulator support" | |
| help | |
| This driver provides support for fixed voltage regulators, | |
| useful for systems which use a combination of software | |
| managed regulators and simple non-configurable regulators. | |
| config REGULATOR_VIRTUAL_CONSUMER | |
| tristate "Virtual regulator consumer support" | |
| help | |
| This driver provides a virtual consumer for the voltage and | |
| current regulator API which provides sysfs controls for | |
| configuring the supplies requested. This is mainly useful | |
| for test purposes. | |
| If unsure, say no. | |
| config REGULATOR_USERSPACE_CONSUMER | |
| tristate "Userspace regulator consumer support" | |
| help | |
| There are some classes of devices that are controlled entirely | |
| from user space. Userspace consumer driver provides ability to | |
| control power supplies for such devices. | |
| If unsure, say no. | |
| config REGULATOR_88PM800 | |
| tristate "Marvell 88PM800 Power regulators" | |
| depends on MFD_88PM800 | |
| help | |
| This driver supports Marvell 88PM800 voltage regulator chips. | |
| It delivers digitally programmable output, | |
| the voltage is programmed via I2C interface. | |
| It's suitable to support PXA988 chips to control VCC_MAIN and | |
| various voltages. | |
| config REGULATOR_88PM8607 | |
| tristate "Marvell 88PM8607 Power regulators" | |
| depends on MFD_88PM860X=y | |
| help | |
| This driver supports 88PM8607 voltage regulator chips. | |
| config REGULATOR_ACT8865 | |
| tristate "Active-semi act8865 voltage regulator" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| This driver controls a active-semi act8865 voltage output | |
| regulator via I2C bus. | |
| config REGULATOR_ACT8945A | |
| tristate "Active-semi ACT8945A voltage regulator" | |
| depends on MFD_ACT8945A | |
| help | |
| This driver controls a active-semi ACT8945A voltage regulator | |
| via I2C bus. The ACT8945A features three step-down DC/DC converters | |
| and four low-dropout linear regulators, along with a ActivePath | |
| battery charger. | |
| config REGULATOR_AD5398 | |
| tristate "Analog Devices AD5398/AD5821 regulators" | |
| depends on I2C | |
| help | |
| This driver supports AD5398 and AD5821 current regulator chips. | |
| If building into module, its name is ad5398.ko. | |
| config REGULATOR_ANATOP | |
| tristate "Freescale i.MX on-chip ANATOP LDO regulators" | |
| depends on MFD_SYSCON | |
| help | |
| Say y here to support Freescale i.MX on-chip ANATOP LDOs | |
| regulators. It is recommended that this option be | |
| enabled on i.MX6 platform. | |
| config REGULATOR_AAT2870 | |
| tristate "AnalogicTech AAT2870 Regulators" | |
| depends on MFD_AAT2870_CORE | |
| help | |
| If you have a AnalogicTech AAT2870 say Y to enable the | |
| regulator driver. | |
| config REGULATOR_AB3100 | |
| tristate "ST-Ericsson AB3100 Regulator functions" | |
| depends on AB3100_CORE | |
| default y if AB3100_CORE | |
| help | |
| These regulators correspond to functionality in the | |
| AB3100 analog baseband dealing with power regulators | |
| for the system. | |
| config REGULATOR_AB8500 | |
| bool "ST-Ericsson AB8500 Power Regulators" | |
| depends on AB8500_CORE | |
| help | |
| This driver supports the regulators found on the ST-Ericsson mixed | |
| signal AB8500 PMIC | |
| config REGULATOR_ARIZONA_LDO1 | |
| tristate "Wolfson Arizona class devices LDO1" | |
| depends on MFD_ARIZONA | |
| depends on SND_SOC | |
| help | |
| Support for the LDO1 regulators found on Wolfson Arizona class | |
| devices. | |
| config REGULATOR_ARIZONA_MICSUPP | |
| tristate "Wolfson Arizona class devices MICSUPP" | |
| depends on MFD_ARIZONA | |
| depends on SND_SOC | |
| help | |
| Support for the MICSUPP regulators found on Wolfson Arizona class | |
| devices. | |
| config REGULATOR_AS3711 | |
| tristate "AS3711 PMIC" | |
| depends on MFD_AS3711 | |
| help | |
| This driver provides support for the voltage regulators on the | |
| AS3711 PMIC | |
| config REGULATOR_AS3722 | |
| tristate "AMS AS3722 PMIC Regulators" | |
| depends on MFD_AS3722 | |
| help | |
| This driver provides support for the voltage regulators on the | |
| AS3722 PMIC. This will enable support for all the software | |
| controllable DCDC/LDO regulators. | |
| config REGULATOR_AXP20X | |
| tristate "X-POWERS AXP20X PMIC Regulators" | |
| depends on MFD_AXP20X | |
| help | |
| This driver provides support for the voltage regulators on the | |
| AXP20X PMIC. | |
| config REGULATOR_BCM590XX | |
| tristate "Broadcom BCM590xx PMU Regulators" | |
| depends on MFD_BCM590XX | |
| help | |
| This driver provides support for the voltage regulators on the | |
| BCM590xx PMUs. This will enable support for the software | |
| controllable LDO/Switching regulators. | |
| config REGULATOR_BD9571MWV | |
| tristate "ROHM BD9571MWV Regulators" | |
| depends on MFD_BD9571MWV | |
| help | |
| This driver provides support for the voltage regulators on the | |
| ROHM BD9571MWV PMIC. This will enable support for the software | |
| controllable regulator and voltage sampling units. | |
| This driver can also be built as a module. If so, the module | |
| will be called bd9571mwv-regulator. | |
| config REGULATOR_CPCAP | |
| tristate "Motorola CPCAP regulator" | |
| depends on MFD_CPCAP | |
| help | |
| Say y here for CPCAP regulator found on some Motorola phones | |
| and tablets such as Droid 4. | |
| config REGULATOR_DA903X | |
| tristate "Dialog Semiconductor DA9030/DA9034 regulators" | |
| depends on PMIC_DA903X | |
| help | |
| Say y here to support the BUCKs and LDOs regulators found on | |
| Dialog Semiconductor DA9030/DA9034 PMIC. | |
| config REGULATOR_DA9052 | |
| tristate "Dialog Semiconductor DA9052/DA9053 regulators" | |
| depends on PMIC_DA9052 | |
| help | |
| This driver supports the voltage regulators of DA9052-BC and | |
| DA9053-AA/Bx PMIC. | |
| config REGULATOR_DA9055 | |
| tristate "Dialog Semiconductor DA9055 regulators" | |
| depends on MFD_DA9055 | |
| help | |
| Say y here to support the BUCKs and LDOs regulators found on | |
| Dialog Semiconductor DA9055 PMIC. | |
| This driver can also be built as a module. If so, the module | |
| will be called da9055-regulator. | |
| config REGULATOR_DA9062 | |
| tristate "Dialog Semiconductor DA9061/62 regulators" | |
| depends on MFD_DA9062 | |
| help | |
| Say y here to support the BUCKs and LDOs regulators found on | |
| DA9061 and DA9062 PMICs. | |
| This driver can also be built as a module. If so, the module | |
| will be called da9062-regulator. | |
| config REGULATOR_DA9063 | |
| tristate "Dialog Semiconductor DA9063 regulators" | |
| depends on MFD_DA9063 | |
| help | |
| Say y here to support the BUCKs and LDOs regulators found on | |
| DA9063 PMICs. | |
| This driver can also be built as a module. If so, the module | |
| will be called da9063-regulator. | |
| config REGULATOR_DA9210 | |
| tristate "Dialog Semiconductor DA9210 regulator" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Say y here to support for the Dialog Semiconductor DA9210. | |
| The DA9210 is a multi-phase synchronous step down | |
| converter 12A DC-DC Buck controlled through an I2C | |
| interface. | |
| config REGULATOR_DA9211 | |
| tristate "Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 regulator" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Say y here to support for the Dialog Semiconductor DA9211/DA9212 | |
| /DA9213/DA9214/DA9215. | |
| The DA9211/DA9212/DA9213/DA9214/DA9215 is a multi-phase synchronous | |
| step down converter 12A or 16A DC-DC Buck controlled through an I2C | |
| interface. | |
| config REGULATOR_DBX500_PRCMU | |
| bool | |
| config REGULATOR_DB8500_PRCMU | |
| bool "ST-Ericsson DB8500 Voltage Domain Regulators" | |
| depends on MFD_DB8500_PRCMU | |
| select REGULATOR_DBX500_PRCMU | |
| help | |
| This driver supports the voltage domain regulators controlled by the | |
| DB8500 PRCMU | |
| config REGULATOR_FAN53555 | |
| tristate "Fairchild FAN53555 Regulator" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| This driver supports Fairchild FAN53555 Digitally Programmable | |
| TinyBuck Regulator. The FAN53555 is a step-down switching voltage | |
| regulator that delivers a digitally programmable output from an | |
| input voltage supply of 2.5V to 5.5V. The output voltage is | |
| programmed through an I2C interface. | |
| config REGULATOR_GPIO | |
| tristate "GPIO regulator support" | |
| depends on GPIOLIB || COMPILE_TEST | |
| help | |
| This driver provides support for regulators that can be | |
| controlled via gpios. | |
| It is capable of supporting current and voltage regulators | |
| and the platform has to provide a mapping of GPIO-states | |
| to target volts/amps. | |
| config REGULATOR_HI6421 | |
| tristate "HiSilicon Hi6421 PMIC voltage regulator support" | |
| depends on MFD_HI6421_PMIC && OF | |
| help | |
| This driver provides support for the voltage regulators on the | |
| HiSilicon Hi6421 PMU / Codec IC. | |
| Hi6421 is a multi-function device which, on regulator part, provides | |
| 21 general purpose LDOs, 3 dedicated LDOs, and 5 BUCKs. All | |
| of them come with support to either ECO (idle) or sleep mode. | |
| config REGULATOR_HI6421V530 | |
| tristate "HiSilicon Hi6421v530 PMIC voltage regulator support" | |
| depends on MFD_HI6421_PMIC && OF | |
| help | |
| This driver provides support for the voltage regulators on | |
| HiSilicon Hi6421v530 PMU / Codec IC. | |
| Hi6421v530 is a multi-function device which, on regulator part, | |
| provides 5 general purpose LDOs, and all of them come with support | |
| to either ECO (idle) or sleep mode. | |
| config REGULATOR_HI655X | |
| tristate "Hisilicon HI655X PMIC regulators support" | |
| depends on ARCH_HISI || COMPILE_TEST | |
| depends on MFD_HI655X_PMIC && OF | |
| help | |
| This driver provides support for the voltage regulators of the | |
| Hisilicon Hi655x PMIC device. | |
| config REGULATOR_ISL9305 | |
| tristate "Intersil ISL9305 regulator" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| This driver supports ISL9305 voltage regulator chip. | |
| config REGULATOR_ISL6271A | |
| tristate "Intersil ISL6271A Power regulator" | |
| depends on I2C | |
| help | |
| This driver supports ISL6271A voltage regulator chip. | |
| config REGULATOR_LM363X | |
| tristate "TI LM363X voltage regulators" | |
| depends on MFD_TI_LMU | |
| help | |
| This driver supports LM3631 and LM3632 voltage regulators for | |
| the LCD bias. | |
| One boost output voltage is configurable and always on. | |
| Other LDOs are used for the display module. | |
| config REGULATOR_LP3971 | |
| tristate "National Semiconductors LP3971 PMIC regulator driver" | |
| depends on I2C | |
| help | |
| Say Y here to support the voltage regulators and convertors | |
| on National Semiconductors LP3971 PMIC | |
| config REGULATOR_LP3972 | |
| tristate "National Semiconductors LP3972 PMIC regulator driver" | |
| depends on I2C | |
| help | |
| Say Y here to support the voltage regulators and convertors | |
| on National Semiconductors LP3972 PMIC | |
| config REGULATOR_LP872X | |
| tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| This driver supports LP8720/LP8725 PMIC | |
| config REGULATOR_LP873X | |
| tristate "TI LP873X Power regulators" | |
| depends on MFD_TI_LP873X && OF | |
| help | |
| This driver supports LP873X voltage regulator chips. LP873X | |
| provides two step-down converters and two general-purpose LDO | |
| voltage regulators. It supports software based voltage control | |
| for different voltage domains | |
| config REGULATOR_LP8755 | |
| tristate "TI LP8755 High Performance PMU driver" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| This driver supports LP8755 High Performance PMU driver. This | |
| chip contains six step-down DC/DC converters which can support | |
| 9 mode multiphase configuration. | |
| config REGULATOR_LP87565 | |
| tristate "TI LP87565 Power regulators" | |
| depends on MFD_TI_LP87565 && OF | |
| help | |
| This driver supports LP87565 voltage regulator chips. LP87565 | |
| provides four step-down converters. It supports software based | |
| voltage control for different voltage domains | |
| config REGULATOR_LP8788 | |
| tristate "TI LP8788 Power Regulators" | |
| depends on MFD_LP8788 | |
| help | |
| This driver supports LP8788 voltage regulator chip. | |
| config REGULATOR_LTC3589 | |
| tristate "LTC3589 8-output voltage regulator" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| This enables support for the LTC3589, LTC3589-1, and LTC3589-2 | |
| 8-output regulators controlled via I2C. | |
| config REGULATOR_LTC3676 | |
| tristate "LTC3676 8-output voltage regulator" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| This enables support for the LTC3676 | |
| 8-output regulators controlled via I2C. | |
| config REGULATOR_MAX14577 | |
| tristate "Maxim 14577/77836 regulator" | |
| depends on MFD_MAX14577 | |
| help | |
| This driver controls a Maxim MAX14577/77836 regulator via I2C bus. | |
| The MAX14577 regulators include safeout LDO and charger current | |
| regulator. The MAX77836 has two additional LDOs. | |
| config REGULATOR_MAX1586 | |
| tristate "Maxim 1586/1587 voltage regulator" | |
| depends on I2C | |
| help | |
| This driver controls a Maxim 1586 or 1587 voltage output | |
| regulator via I2C bus. The provided regulator is suitable | |
| for PXA27x chips to control VCC_CORE and VCC_USIM voltages. | |
| config REGULATOR_MAX77620 | |
| tristate "Maxim 77620/MAX20024 voltage regulator" | |
| depends on MFD_MAX77620 | |
| help | |
| This driver controls Maxim MAX77620 voltage output regulator | |
| via I2C bus. The provided regulator is suitable for Tegra | |
| chip to control Step-Down DC-DC and LDOs. Say Y here to | |
| enable the regulator driver. | |
| config REGULATOR_MAX8649 | |
| tristate "Maxim 8649 voltage regulator" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| This driver controls a Maxim 8649 voltage output regulator via | |
| I2C bus. | |
| config REGULATOR_MAX8660 | |
| tristate "Maxim 8660/8661 voltage regulator" | |
| depends on I2C | |
| help | |
| This driver controls a Maxim 8660/8661 voltage output | |
| regulator via I2C bus. | |
| config REGULATOR_MAX8907 | |
| tristate "Maxim 8907 voltage regulator" | |
| depends on MFD_MAX8907 | |
| help | |
| This driver controls a Maxim 8907 voltage output regulator | |
| via I2C bus. The provided regulator is suitable for Tegra | |
| chip to control Step-Down DC-DC and LDOs. | |
| config REGULATOR_MAX8925 | |
| tristate "Maxim MAX8925 Power Management IC" | |
| depends on MFD_MAX8925 | |
| help | |
| Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC. | |
| config REGULATOR_MAX8952 | |
| tristate "Maxim MAX8952 Power Management IC" | |
| depends on I2C | |
| help | |
| This driver controls a Maxim 8952 voltage output regulator | |
| via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS | |
| modes ranging from 0.77V to 1.40V by 0.01V steps. | |
| config REGULATOR_MAX8973 | |
| tristate "Maxim MAX8973 voltage regulator " | |
| depends on I2C | |
| depends on THERMAL && THERMAL_OF | |
| select REGMAP_I2C | |
| help | |
| The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down | |
| switching regulator delievers up to 9A of output current. Each | |
| phase operates at a 2MHz fixed frequency with a 120 deg shift | |
| from the adjacent phase, allowing the use of small magnetic component. | |
| config REGULATOR_MAX8997 | |
| tristate "Maxim 8997/8966 regulator" | |
| depends on MFD_MAX8997 | |
| help | |
| This driver controls a Maxim 8997/8966 regulator | |
| via I2C bus. The provided regulator is suitable for S5PC110, | |
| S5PV210, and Exynos-4 chips to control VCC_CORE and | |
| VCC_USIM voltages. | |
| config REGULATOR_MAX8998 | |
| tristate "Maxim 8998 voltage regulator" | |
| depends on MFD_MAX8998 | |
| help | |
| This driver controls a Maxim 8998 voltage output regulator | |
| via I2C bus. The provided regulator is suitable for S3C6410 | |
| and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. | |
| config REGULATOR_MAX77686 | |
| tristate "Maxim 77686 regulator" | |
| depends on MFD_MAX77686 | |
| help | |
| This driver controls a Maxim 77686 regulator | |
| via I2C bus. The provided regulator is suitable for | |
| Exynos-4 chips to control VARM and VINT voltages. | |
| config REGULATOR_MAX77693 | |
| tristate "Maxim 77693/77843 regulator" | |
| depends on (MFD_MAX77693 || MFD_MAX77843) | |
| help | |
| This driver controls a Maxim 77693/77843 regulators via I2C bus. | |
| The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2' | |
| and one current regulator 'CHARGER'. This is suitable for | |
| Exynos-4x12 (MAX77693) or Exynos5433 (MAX77843) SoC chips. | |
| config REGULATOR_MAX77802 | |
| tristate "Maxim 77802 regulator" | |
| depends on MFD_MAX77686 | |
| help | |
| This driver controls a Maxim 77802 regulator | |
| via I2C bus. The provided regulator is suitable for | |
| Exynos5420/Exynos5800 SoCs to control various voltages. | |
| It includes support for control of voltage and ramp speed. | |
| config REGULATOR_MC13XXX_CORE | |
| tristate | |
| config REGULATOR_MC13783 | |
| tristate "Freescale MC13783 regulator driver" | |
| depends on MFD_MC13XXX | |
| select REGULATOR_MC13XXX_CORE | |
| help | |
| Say y here to support the regulators found on the Freescale MC13783 | |
| PMIC. | |
| config REGULATOR_MC13892 | |
| tristate "Freescale MC13892 regulator driver" | |
| depends on MFD_MC13XXX | |
| select REGULATOR_MC13XXX_CORE | |
| help | |
| Say y here to support the regulators found on the Freescale MC13892 | |
| PMIC. | |
| config REGULATOR_MT6311 | |
| tristate "MediaTek MT6311 PMIC" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Say y here to select this option to enable the power regulator of | |
| MediaTek MT6311 PMIC. | |
| This driver supports the control of different power rails of device | |
| through regulator interface. | |
| config REGULATOR_MT6323 | |
| tristate "MediaTek MT6323 PMIC" | |
| depends on MFD_MT6397 | |
| help | |
| Say y here to select this option to enable the power regulator of | |
| MediaTek MT6323 PMIC. | |
| This driver supports the control of different power rails of device | |
| through regulator interface. | |
| config REGULATOR_MT6380 | |
| tristate "MediaTek MT6380 PMIC" | |
| depends on MTK_PMIC_WRAP | |
| help | |
| Say y here to select this option to enable the power regulator of | |
| MediaTek MT6380 PMIC. | |
| This driver supports the control of different power rails of device | |
| through regulator interface. | |
| config REGULATOR_MT6397 | |
| tristate "MediaTek MT6397 PMIC" | |
| depends on MFD_MT6397 | |
| help | |
| Say y here to select this option to enable the power regulator of | |
| MediaTek MT6397 PMIC. | |
| This driver supports the control of different power rails of device | |
| through regulator interface. | |
| config REGULATOR_PALMAS | |
| tristate "TI Palmas PMIC Regulators" | |
| depends on MFD_PALMAS | |
| help | |
| If you wish to control the regulators on the Palmas series of | |
| chips say Y here. This will enable support for all the software | |
| controllable SMPS/LDO regulators. | |
| The regulators available on Palmas series chips vary depending | |
| on the muxing. This is handled automatically in the driver by | |
| reading the mux info from OTP. | |
| config REGULATOR_PBIAS | |
| tristate "PBIAS OMAP regulator driver" | |
| depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON | |
| help | |
| Say y here to support pbias regulator for mmc1:SD card i/o | |
| on OMAP SoCs. | |
| This driver provides support for OMAP pbias modelled | |
| regulators. | |
| config REGULATOR_PCAP | |
| tristate "Motorola PCAP2 regulator driver" | |
| depends on EZX_PCAP | |
| help | |
| This driver provides support for the voltage regulators of the | |
| PCAP2 PMIC. | |
| config REGULATOR_PCF50633 | |
| tristate "NXP PCF50633 regulator driver" | |
| depends on MFD_PCF50633 | |
| help | |
| Say Y here to support the voltage regulators and convertors | |
| on PCF50633 | |
| config REGULATOR_PFUZE100 | |
| tristate "Freescale PFUZE100/200/3000 regulator driver" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Say y here to support the regulators found on the Freescale | |
| PFUZE100/200/3000 PMIC. | |
| config REGULATOR_PV88060 | |
| tristate "Powerventure Semiconductor PV88060 regulator" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Say y here to support the voltage regulators and convertors | |
| PV88060 | |
| config REGULATOR_PV88080 | |
| tristate "Powerventure Semiconductor PV88080 regulator" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Say y here to support the buck convertors on PV88080 | |
| config REGULATOR_PV88090 | |
| tristate "Powerventure Semiconductor PV88090 regulator" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| Say y here to support the voltage regulators and convertors | |
| on PV88090 | |
| config REGULATOR_PWM | |
| tristate "PWM voltage regulator" | |
| depends on PWM | |
| help | |
| This driver supports PWM controlled voltage regulators. PWM | |
| duty cycle can increase or decrease the voltage. | |
| config REGULATOR_QCOM_RPM | |
| tristate "Qualcomm RPM regulator driver" | |
| depends on MFD_QCOM_RPM | |
| help | |
| If you say yes to this option, support will be included for the | |
| regulators exposed by the Resource Power Manager found in Qualcomm | |
| 8660, 8960 and 8064 based devices. | |
| Say M here if you want to include support for the regulators on the | |
| Qualcomm RPM as a module. The module will be named | |
| "qcom_rpm-regulator". | |
| config REGULATOR_QCOM_SMD_RPM | |
| tristate "Qualcomm SMD based RPM regulator driver" | |
| depends on QCOM_SMD_RPM | |
| help | |
| If you say yes to this option, support will be included for the | |
| regulators exposed by the Resource Power Manager found in Qualcomm | |
| 8974 based devices. | |
| Say M here if you want to include support for the regulators on the | |
| Qualcomm RPM as a module. The module will be named | |
| "qcom_smd-regulator". | |
| config REGULATOR_QCOM_SPMI | |
| tristate "Qualcomm SPMI regulator driver" | |
| depends on SPMI || COMPILE_TEST | |
| help | |
| If you say yes to this option, support will be included for the | |
| regulators found in Qualcomm SPMI PMICs. | |
| Say M here if you want to include support for the regulators on the | |
| Qualcomm SPMI PMICs as a module. The module will be named | |
| "qcom_spmi-regulator". | |
| config REGULATOR_RC5T583 | |
| tristate "RICOH RC5T583 Power regulators" | |
| depends on MFD_RC5T583 | |
| help | |
| Select this option to enable the power regulator of RICOH | |
| PMIC RC5T583. | |
| This driver supports the control of different power rails of device | |
| through regulator interface. The device supports multiple DCDC/LDO | |
| outputs which can be controlled by i2c communication. | |
| config REGULATOR_RK808 | |
| tristate "Rockchip RK805/RK808/RK818 Power regulators" | |
| depends on MFD_RK808 | |
| help | |
| Select this option to enable the power regulator of ROCKCHIP | |
| PMIC RK805,RK808 and RK818. | |
| This driver supports the control of different power rails of device | |
| through regulator interface. The device supports multiple DCDC/LDO | |
| outputs which can be controlled by i2c communication. | |
| config REGULATOR_RN5T618 | |
| tristate "Ricoh RN5T567/618 voltage regulators" | |
| depends on MFD_RN5T618 | |
| help | |
| Say y here to support the regulators found on Ricoh RN5T567, | |
| RN5T618 or RC5T619 PMIC. | |
| config REGULATOR_RT5033 | |
| tristate "Richtek RT5033 Regulators" | |
| depends on MFD_RT5033 | |
| help | |
| This adds support for voltage and current regulators in Richtek | |
| RT5033 PMIC. The device supports multiple regulators like | |
| current source, LDO and Buck. | |
| config REGULATOR_S2MPA01 | |
| tristate "Samsung S2MPA01 voltage regulator" | |
| depends on MFD_SEC_CORE | |
| help | |
| This driver controls Samsung S2MPA01 voltage output regulator | |
| via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs. | |
| config REGULATOR_S2MPS11 | |
| tristate "Samsung S2MPS11/13/14/15/S2MPU02 voltage regulator" | |
| depends on MFD_SEC_CORE | |
| help | |
| This driver supports a Samsung S2MPS11/13/14/15/S2MPU02 voltage | |
| output regulator via I2C bus. The chip is comprised of high efficient | |
| Buck converters including Dual-Phase Buck converter, Buck-Boost | |
| converter, various LDOs. | |
| config REGULATOR_S5M8767 | |
| tristate "Samsung S5M8767A voltage regulator" | |
| depends on MFD_SEC_CORE | |
| help | |
| This driver supports a Samsung S5M8767A voltage output regulator | |
| via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and | |
| supports DVS mode with 8bits of output voltage control. | |
| config REGULATOR_SKY81452 | |
| tristate "Skyworks Solutions SKY81452 voltage regulator" | |
| depends on MFD_SKY81452 | |
| help | |
| This driver supports Skyworks SKY81452 voltage output regulator | |
| via I2C bus. SKY81452 has one voltage linear regulator can be | |
| programmed from 4.5V to 20V. | |
| This driver can also be built as a module. If so, the module | |
| will be called sky81452-regulator. | |
| config REGULATOR_STM32_VREFBUF | |
| tristate "STMicroelectronics STM32 VREFBUF" | |
| depends on ARCH_STM32 || COMPILE_TEST | |
| help | |
| This driver supports STMicroelectronics STM32 VREFBUF (voltage | |
| reference buffer) which can be used as voltage reference for | |
| internal ADCs, DACs and also for external components through | |
| dedicated Vref+ pin. | |
| This driver can also be built as a module. If so, the module | |
| will be called stm32-vrefbuf. | |
| config REGULATOR_TI_ABB | |
| tristate "TI Adaptive Body Bias on-chip LDO" | |
| depends on ARCH_OMAP | |
| help | |
| Select this option to support Texas Instruments' on-chip Adaptive Body | |
| Bias (ABB) LDO regulators. It is recommended that this option be | |
| enabled on required TI SoC. Certain Operating Performance Points | |
| on TI SoCs may be unstable without enabling this as it provides | |
| device specific optimized bias to allow/optimize functionality. | |
| config REGULATOR_STW481X_VMMC | |
| bool "ST Microelectronics STW481X VMMC regulator" | |
| depends on MFD_STW481X || COMPILE_TEST | |
| default y if MFD_STW481X | |
| help | |
| This driver supports the internal VMMC regulator in the STw481x | |
| PMIC chips. | |
| config REGULATOR_TPS51632 | |
| tristate "TI TPS51632 Power Regulator" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| This driver supports TPS51632 voltage regulator chip. | |
| The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller | |
| with Serial VID control and DVFS. | |
| The voltage output can be configure through I2C interface or PWM | |
| interface. | |
| config REGULATOR_TPS6105X | |
| tristate "TI TPS6105X Power regulators" | |
| depends on TPS6105X | |
| default y if TPS6105X | |
| help | |
| This driver supports TPS61050/TPS61052 voltage regulator chips. | |
| It is a single boost converter primarily for white LEDs and | |
| audio amplifiers. | |
| config REGULATOR_TPS62360 | |
| tristate "TI TPS6236x Power Regulator" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| This driver supports TPS6236x voltage regulator chip. This | |
| regulator is meant for processor core supply. This chip is | |
| high-frequency synchronous step down dc-dc converter optimized | |
| for battery-powered portable applications. | |
| config REGULATOR_TPS65023 | |
| tristate "TI TPS65023 Power regulators" | |
| depends on I2C | |
| select REGMAP_I2C | |
| help | |
| This driver supports TPS65023 voltage regulator chips. TPS65023 provides | |
| three step-down converters and two general-purpose LDO voltage regulators. | |
| It supports TI's software based Class-2 SmartReflex implementation. | |
| config REGULATOR_TPS6507X | |
| tristate "TI TPS6507X Power regulators" | |
| depends on I2C | |
| help | |
| This driver supports TPS6507X voltage regulator chips. TPS6507X provides | |
| three step-down converters and two general-purpose LDO voltage regulators. | |
| It supports TI's software based Class-2 SmartReflex implementation. | |
| config REGULATOR_TPS65086 | |
| tristate "TI TPS65086 Power regulators" | |
| depends on MFD_TPS65086 | |
| help | |
| This driver provides support for the voltage regulators on | |
| TI TPS65086 PMICs. | |
| config REGULATOR_TPS65090 | |
| tristate "TI TPS65090 Power regulator" | |
| depends on MFD_TPS65090 | |
| help | |
| This driver provides support for the voltage regulators on the | |
| TI TPS65090 PMIC. | |
| config REGULATOR_TPS65132 | |
| tristate "TI TPS65132 Dual Output Power regulators" | |
| depends on I2C && GPIOLIB | |
| select REGMAP_I2C | |
| help | |
| This driver supports TPS65132 single inductor - dual output | |
| power supply specifcally designed for display panels. | |
| config REGULATOR_TPS65217 | |
| tristate "TI TPS65217 Power regulators" | |
| depends on MFD_TPS65217 | |
| help | |
| This driver supports TPS65217 voltage regulator chips. TPS65217 | |
| provides three step-down converters and four general-purpose LDO | |
| voltage regulators. It supports software based voltage control | |
| for different voltage domains | |
| config REGULATOR_TPS65218 | |
| tristate "TI TPS65218 Power regulators" | |
| depends on MFD_TPS65218 && OF | |
| help | |
| This driver supports TPS65218 voltage regulator chips. TPS65218 | |
| provides six step-down converters and one general-purpose LDO | |
| voltage regulators. It supports software based voltage control | |
| for different voltage domains | |
| config REGULATOR_TPS6524X | |
| tristate "TI TPS6524X Power regulators" | |
| depends on SPI | |
| help | |
| This driver supports TPS6524X voltage regulator chips. TPS6524X | |
| provides three step-down converters and two general-purpose LDO | |
| voltage regulators. This device is interfaced using a customized | |
| serial interface currently supported on the sequencer serial | |
| port controller. | |
| config REGULATOR_TPS6586X | |
| tristate "TI TPS6586X Power regulators" | |
| depends on MFD_TPS6586X | |
| help | |
| This driver supports TPS6586X voltage regulator chips. | |
| config REGULATOR_TPS65910 | |
| tristate "TI TPS65910/TPS65911 Power Regulators" | |
| depends on MFD_TPS65910 | |
| help | |
| This driver supports TPS65910/TPS65911 voltage regulator chips. | |
| config REGULATOR_TPS65912 | |
| tristate "TI TPS65912 Power regulator" | |
| depends on MFD_TPS65912 | |
| help | |
| This driver supports TPS65912 voltage regulator chip. | |
| config REGULATOR_TPS80031 | |
| tristate "TI TPS80031/TPS80032 power regulator driver" | |
| depends on MFD_TPS80031 | |
| help | |
| TPS80031/ TPS80032 Fully Integrated Power Management with Power | |
| Path and Battery Charger. It has 5 configurable step-down | |
| converters, 11 general purpose LDOs, VBUS generator and digital | |
| output to control regulators. | |
| config REGULATOR_TWL4030 | |
| tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" | |
| depends on TWL4030_CORE | |
| help | |
| This driver supports the voltage regulators provided by | |
| this family of companion chips. | |
| config REGULATOR_VCTRL | |
| tristate "Voltage controlled regulators" | |
| depends on OF | |
| help | |
| This driver provides support for voltage regulators whose output | |
| voltage is controlled by the voltage of another regulator. | |
| config REGULATOR_VEXPRESS | |
| tristate "Versatile Express regulators" | |
| depends on VEXPRESS_CONFIG | |
| help | |
| This driver provides support for voltage regulators available | |
| on the ARM Ltd's Versatile Express platform. | |
| config REGULATOR_WM831X | |
| tristate "Wolfson Microelectronics WM831x PMIC regulators" | |
| depends on MFD_WM831X | |
| help | |
| Support the voltage and current regulators of the WM831x series | |
| of PMIC devices. | |
| config REGULATOR_WM8350 | |
| tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" | |
| depends on MFD_WM8350 | |
| help | |
| This driver provides support for the voltage and current regulators | |
| of the WM8350 AudioPlus PMIC. | |
| config REGULATOR_WM8400 | |
| tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" | |
| depends on MFD_WM8400 | |
| help | |
| This driver provides support for the voltage regulators of the | |
| WM8400 AudioPlus PMIC. | |
| config REGULATOR_WM8994 | |
| tristate "Wolfson Microelectronics WM8994 CODEC" | |
| depends on MFD_WM8994 | |
| help | |
| This driver provides support for the voltage regulators on the | |
| WM8994 CODEC. | |
| endif | |