| /* | |
| * TerraTec Cinergy T2/qanu USB2 DVB-T adapter. | |
| * | |
| * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi) | |
| * | |
| * Based on the dvb-usb-framework code and the | |
| * original Terratec Cinergy T2 driver by: | |
| * | |
| * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and | |
| * Holger Waechtler <holger@qanu.de> | |
| * | |
| * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License as published by | |
| * the Free Software Foundation; either version 2 of the License, or | |
| * (at your option) any later version. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| */ | |
| #include "cinergyT2.h" | |
| /** | |
| * convert linux-dvb frontend parameter set into TPS. | |
| * See ETSI ETS-300744, section 4.6.2, table 9 for details. | |
| * | |
| * This function is probably reusable and may better get placed in a support | |
| * library. | |
| * | |
| * We replace errornous fields by default TPS fields (the ones with value 0). | |
| */ | |
| static uint16_t compute_tps(struct dtv_frontend_properties *op) | |
| { | |
| uint16_t tps = 0; | |
| switch (op->code_rate_HP) { | |
| case FEC_2_3: | |
| tps |= (1 << 7); | |
| break; | |
| case FEC_3_4: | |
| tps |= (2 << 7); | |
| break; | |
| case FEC_5_6: | |
| tps |= (3 << 7); | |
| break; | |
| case FEC_7_8: | |
| tps |= (4 << 7); | |
| break; | |
| case FEC_1_2: | |
| case FEC_AUTO: | |
| default: | |
| /* tps |= (0 << 7) */; | |
| } | |
| switch (op->code_rate_LP) { | |
| case FEC_2_3: | |
| tps |= (1 << 4); | |
| break; | |
| case FEC_3_4: | |
| tps |= (2 << 4); | |
| break; | |
| case FEC_5_6: | |
| tps |= (3 << 4); | |
| break; | |
| case FEC_7_8: | |
| tps |= (4 << 4); | |
| break; | |
| case FEC_1_2: | |
| case FEC_AUTO: | |
| default: | |
| /* tps |= (0 << 4) */; | |
| } | |
| switch (op->modulation) { | |
| case QAM_16: | |
| tps |= (1 << 13); | |
| break; | |
| case QAM_64: | |
| tps |= (2 << 13); | |
| break; | |
| case QPSK: | |
| default: | |
| /* tps |= (0 << 13) */; | |
| } | |
| switch (op->transmission_mode) { | |
| case TRANSMISSION_MODE_8K: | |
| tps |= (1 << 0); | |
| break; | |
| case TRANSMISSION_MODE_2K: | |
| default: | |
| /* tps |= (0 << 0) */; | |
| } | |
| switch (op->guard_interval) { | |
| case GUARD_INTERVAL_1_16: | |
| tps |= (1 << 2); | |
| break; | |
| case GUARD_INTERVAL_1_8: | |
| tps |= (2 << 2); | |
| break; | |
| case GUARD_INTERVAL_1_4: | |
| tps |= (3 << 2); | |
| break; | |
| case GUARD_INTERVAL_1_32: | |
| default: | |
| /* tps |= (0 << 2) */; | |
| } | |
| switch (op->hierarchy) { | |
| case HIERARCHY_1: | |
| tps |= (1 << 10); | |
| break; | |
| case HIERARCHY_2: | |
| tps |= (2 << 10); | |
| break; | |
| case HIERARCHY_4: | |
| tps |= (3 << 10); | |
| break; | |
| case HIERARCHY_NONE: | |
| default: | |
| /* tps |= (0 << 10) */; | |
| } | |
| return tps; | |
| } | |
| struct cinergyt2_fe_state { | |
| struct dvb_frontend fe; | |
| struct dvb_usb_device *d; | |
| unsigned char data[64]; | |
| struct mutex data_mutex; | |
| struct dvbt_get_status_msg status; | |
| }; | |
| static int cinergyt2_fe_read_status(struct dvb_frontend *fe, | |
| enum fe_status *status) | |
| { | |
| struct cinergyt2_fe_state *state = fe->demodulator_priv; | |
| int ret; | |
| mutex_lock(&state->data_mutex); | |
| state->data[0] = CINERGYT2_EP1_GET_TUNER_STATUS; | |
| ret = dvb_usb_generic_rw(state->d, state->data, 1, | |
| state->data, sizeof(state->status), 0); | |
| if (!ret) | |
| memcpy(&state->status, state->data, sizeof(state->status)); | |
| mutex_unlock(&state->data_mutex); | |
| if (ret < 0) | |
| return ret; | |
| *status = 0; | |
| if (0xffff - le16_to_cpu(state->status.gain) > 30) | |
| *status |= FE_HAS_SIGNAL; | |
| if (state->status.lock_bits & (1 << 6)) | |
| *status |= FE_HAS_LOCK; | |
| if (state->status.lock_bits & (1 << 5)) | |
| *status |= FE_HAS_SYNC; | |
| if (state->status.lock_bits & (1 << 4)) | |
| *status |= FE_HAS_CARRIER; | |
| if (state->status.lock_bits & (1 << 1)) | |
| *status |= FE_HAS_VITERBI; | |
| if ((*status & (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) != | |
| (FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC)) | |
| *status &= ~FE_HAS_LOCK; | |
| return 0; | |
| } | |
| static int cinergyt2_fe_read_ber(struct dvb_frontend *fe, u32 *ber) | |
| { | |
| struct cinergyt2_fe_state *state = fe->demodulator_priv; | |
| *ber = le32_to_cpu(state->status.viterbi_error_rate); | |
| return 0; | |
| } | |
| static int cinergyt2_fe_read_unc_blocks(struct dvb_frontend *fe, u32 *unc) | |
| { | |
| struct cinergyt2_fe_state *state = fe->demodulator_priv; | |
| *unc = le32_to_cpu(state->status.uncorrected_block_count); | |
| return 0; | |
| } | |
| static int cinergyt2_fe_read_signal_strength(struct dvb_frontend *fe, | |
| u16 *strength) | |
| { | |
| struct cinergyt2_fe_state *state = fe->demodulator_priv; | |
| *strength = (0xffff - le16_to_cpu(state->status.gain)); | |
| return 0; | |
| } | |
| static int cinergyt2_fe_read_snr(struct dvb_frontend *fe, u16 *snr) | |
| { | |
| struct cinergyt2_fe_state *state = fe->demodulator_priv; | |
| *snr = (state->status.snr << 8) | state->status.snr; | |
| return 0; | |
| } | |
| static int cinergyt2_fe_init(struct dvb_frontend *fe) | |
| { | |
| return 0; | |
| } | |
| static int cinergyt2_fe_sleep(struct dvb_frontend *fe) | |
| { | |
| deb_info("cinergyt2_fe_sleep() Called\n"); | |
| return 0; | |
| } | |
| static int cinergyt2_fe_get_tune_settings(struct dvb_frontend *fe, | |
| struct dvb_frontend_tune_settings *tune) | |
| { | |
| tune->min_delay_ms = 800; | |
| return 0; | |
| } | |
| static int cinergyt2_fe_set_frontend(struct dvb_frontend *fe) | |
| { | |
| struct dtv_frontend_properties *fep = &fe->dtv_property_cache; | |
| struct cinergyt2_fe_state *state = fe->demodulator_priv; | |
| struct dvbt_set_parameters_msg *param; | |
| int err; | |
| mutex_lock(&state->data_mutex); | |
| param = (void *)state->data; | |
| param->cmd = CINERGYT2_EP1_SET_TUNER_PARAMETERS; | |
| param->tps = cpu_to_le16(compute_tps(fep)); | |
| param->freq = cpu_to_le32(fep->frequency / 1000); | |
| param->flags = 0; | |
| switch (fep->bandwidth_hz) { | |
| default: | |
| case 8000000: | |
| param->bandwidth = 8; | |
| break; | |
| case 7000000: | |
| param->bandwidth = 7; | |
| break; | |
| case 6000000: | |
| param->bandwidth = 6; | |
| break; | |
| } | |
| err = dvb_usb_generic_rw(state->d, state->data, sizeof(*param), | |
| state->data, 2, 0); | |
| if (err < 0) | |
| err("cinergyt2_fe_set_frontend() Failed! err=%d\n", err); | |
| mutex_unlock(&state->data_mutex); | |
| return (err < 0) ? err : 0; | |
| } | |
| static void cinergyt2_fe_release(struct dvb_frontend *fe) | |
| { | |
| struct cinergyt2_fe_state *state = fe->demodulator_priv; | |
| kfree(state); | |
| } | |
| static const struct dvb_frontend_ops cinergyt2_fe_ops; | |
| struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d) | |
| { | |
| struct cinergyt2_fe_state *s = kzalloc(sizeof( | |
| struct cinergyt2_fe_state), GFP_KERNEL); | |
| if (s == NULL) | |
| return NULL; | |
| s->d = d; | |
| memcpy(&s->fe.ops, &cinergyt2_fe_ops, sizeof(struct dvb_frontend_ops)); | |
| s->fe.demodulator_priv = s; | |
| mutex_init(&s->data_mutex); | |
| return &s->fe; | |
| } | |
| static const struct dvb_frontend_ops cinergyt2_fe_ops = { | |
| .delsys = { SYS_DVBT }, | |
| .info = { | |
| .name = DRIVER_NAME, | |
| .frequency_min = 174000000, | |
| .frequency_max = 862000000, | |
| .frequency_stepsize = 166667, | |
| .caps = FE_CAN_INVERSION_AUTO | FE_CAN_FEC_1_2 | |
| | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | |
| | FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | |
| | FE_CAN_FEC_AUTO | FE_CAN_QPSK | |
| | FE_CAN_QAM_16 | FE_CAN_QAM_64 | |
| | FE_CAN_QAM_AUTO | |
| | FE_CAN_TRANSMISSION_MODE_AUTO | |
| | FE_CAN_GUARD_INTERVAL_AUTO | |
| | FE_CAN_HIERARCHY_AUTO | |
| | FE_CAN_RECOVER | |
| | FE_CAN_MUTE_TS | |
| }, | |
| .release = cinergyt2_fe_release, | |
| .init = cinergyt2_fe_init, | |
| .sleep = cinergyt2_fe_sleep, | |
| .set_frontend = cinergyt2_fe_set_frontend, | |
| .get_tune_settings = cinergyt2_fe_get_tune_settings, | |
| .read_status = cinergyt2_fe_read_status, | |
| .read_ber = cinergyt2_fe_read_ber, | |
| .read_signal_strength = cinergyt2_fe_read_signal_strength, | |
| .read_snr = cinergyt2_fe_read_snr, | |
| .read_ucblocks = cinergyt2_fe_read_unc_blocks, | |
| }; |