| /* | |
| * isp.c | |
| * | |
| * TI OMAP3 ISP - Core | |
| * | |
| * Copyright (C) 2006-2010 Nokia Corporation | |
| * Copyright (C) 2007-2009 Texas Instruments, Inc. | |
| * | |
| * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> | |
| * Sakari Ailus <sakari.ailus@iki.fi> | |
| * | |
| * Contributors: | |
| * Laurent Pinchart <laurent.pinchart@ideasonboard.com> | |
| * Sakari Ailus <sakari.ailus@iki.fi> | |
| * David Cohen <dacohen@gmail.com> | |
| * Stanimir Varbanov <svarbanov@mm-sol.com> | |
| * Vimarsh Zutshi <vimarsh.zutshi@gmail.com> | |
| * Tuukka Toivonen <tuukkat76@gmail.com> | |
| * Sergio Aguirre <saaguirre@ti.com> | |
| * Antti Koskipaa <akoskipa@gmail.com> | |
| * Ivan T. Ivanov <iivanov@mm-sol.com> | |
| * RaniSuneela <r-m@ti.com> | |
| * Atanas Filipov <afilipov@mm-sol.com> | |
| * Gjorgji Rosikopulos <grosikopulos@mm-sol.com> | |
| * Hiroshi DOYU <hiroshi.doyu@nokia.com> | |
| * Nayden Kanchev <nkanchev@mm-sol.com> | |
| * Phil Carmody <ext-phil.2.carmody@nokia.com> | |
| * Artem Bityutskiy <artem.bityutskiy@nokia.com> | |
| * Dominic Curran <dcurran@ti.com> | |
| * Ilkka Myllyperkio <ilkka.myllyperkio@sofica.fi> | |
| * Pallavi Kulkarni <p-kulkarni@ti.com> | |
| * Vaibhav Hiremath <hvaibhav@ti.com> | |
| * Mohit Jalori <mjalori@ti.com> | |
| * Sameer Venkatraman <sameerv@ti.com> | |
| * Senthilvadivu Guruswamy <svadivu@ti.com> | |
| * Thara Gopinath <thara@ti.com> | |
| * Toni Leinonen <toni.leinonen@nokia.com> | |
| * Troy Laramy <t-laramy@ti.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <asm/cacheflush.h> | |
| #include <linux/clk.h> | |
| #include <linux/clkdev.h> | |
| #include <linux/delay.h> | |
| #include <linux/device.h> | |
| #include <linux/dma-mapping.h> | |
| #include <linux/i2c.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/mfd/syscon.h> | |
| #include <linux/module.h> | |
| #include <linux/omap-iommu.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/property.h> | |
| #include <linux/regulator/consumer.h> | |
| #include <linux/slab.h> | |
| #include <linux/sched.h> | |
| #include <linux/vmalloc.h> | |
| #include <asm/dma-iommu.h> | |
| #include <media/v4l2-common.h> | |
| #include <media/v4l2-fwnode.h> | |
| #include <media/v4l2-device.h> | |
| #include <media/v4l2-mc.h> | |
| #include "isp.h" | |
| #include "ispreg.h" | |
| #include "ispccdc.h" | |
| #include "isppreview.h" | |
| #include "ispresizer.h" | |
| #include "ispcsi2.h" | |
| #include "ispccp2.h" | |
| #include "isph3a.h" | |
| #include "isphist.h" | |
| static unsigned int autoidle; | |
| module_param(autoidle, int, 0444); | |
| MODULE_PARM_DESC(autoidle, "Enable OMAP3ISP AUTOIDLE support"); | |
| static void isp_save_ctx(struct isp_device *isp); | |
| static void isp_restore_ctx(struct isp_device *isp); | |
| static const struct isp_res_mapping isp_res_maps[] = { | |
| { | |
| .isp_rev = ISP_REVISION_2_0, | |
| .offset = { | |
| /* first MMIO area */ | |
| 0x0000, /* base, len 0x0070 */ | |
| 0x0400, /* ccp2, len 0x01f0 */ | |
| 0x0600, /* ccdc, len 0x00a8 */ | |
| 0x0a00, /* hist, len 0x0048 */ | |
| 0x0c00, /* h3a, len 0x0060 */ | |
| 0x0e00, /* preview, len 0x00a0 */ | |
| 0x1000, /* resizer, len 0x00ac */ | |
| 0x1200, /* sbl, len 0x00fc */ | |
| /* second MMIO area */ | |
| 0x0000, /* csi2a, len 0x0170 */ | |
| 0x0170, /* csiphy2, len 0x000c */ | |
| }, | |
| .phy_type = ISP_PHY_TYPE_3430, | |
| }, | |
| { | |
| .isp_rev = ISP_REVISION_15_0, | |
| .offset = { | |
| /* first MMIO area */ | |
| 0x0000, /* base, len 0x0070 */ | |
| 0x0400, /* ccp2, len 0x01f0 */ | |
| 0x0600, /* ccdc, len 0x00a8 */ | |
| 0x0a00, /* hist, len 0x0048 */ | |
| 0x0c00, /* h3a, len 0x0060 */ | |
| 0x0e00, /* preview, len 0x00a0 */ | |
| 0x1000, /* resizer, len 0x00ac */ | |
| 0x1200, /* sbl, len 0x00fc */ | |
| /* second MMIO area */ | |
| 0x0000, /* csi2a, len 0x0170 (1st area) */ | |
| 0x0170, /* csiphy2, len 0x000c */ | |
| 0x01c0, /* csi2a, len 0x0040 (2nd area) */ | |
| 0x0400, /* csi2c, len 0x0170 (1st area) */ | |
| 0x0570, /* csiphy1, len 0x000c */ | |
| 0x05c0, /* csi2c, len 0x0040 (2nd area) */ | |
| }, | |
| .phy_type = ISP_PHY_TYPE_3630, | |
| }, | |
| }; | |
| /* Structure for saving/restoring ISP module registers */ | |
| static struct isp_reg isp_reg_list[] = { | |
| {OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG, 0}, | |
| {OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, 0}, | |
| {OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL, 0}, | |
| {0, ISP_TOK_TERM, 0} | |
| }; | |
| /* | |
| * omap3isp_flush - Post pending L3 bus writes by doing a register readback | |
| * @isp: OMAP3 ISP device | |
| * | |
| * In order to force posting of pending writes, we need to write and | |
| * readback the same register, in this case the revision register. | |
| * | |
| * See this link for reference: | |
| * http://www.mail-archive.com/linux-omap@vger.kernel.org/msg08149.html | |
| */ | |
| void omap3isp_flush(struct isp_device *isp) | |
| { | |
| isp_reg_writel(isp, 0, OMAP3_ISP_IOMEM_MAIN, ISP_REVISION); | |
| isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_REVISION); | |
| } | |
| /* ----------------------------------------------------------------------------- | |
| * XCLK | |
| */ | |
| #define to_isp_xclk(_hw) container_of(_hw, struct isp_xclk, hw) | |
| static void isp_xclk_update(struct isp_xclk *xclk, u32 divider) | |
| { | |
| switch (xclk->id) { | |
| case ISP_XCLK_A: | |
| isp_reg_clr_set(xclk->isp, OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL, | |
| ISPTCTRL_CTRL_DIVA_MASK, | |
| divider << ISPTCTRL_CTRL_DIVA_SHIFT); | |
| break; | |
| case ISP_XCLK_B: | |
| isp_reg_clr_set(xclk->isp, OMAP3_ISP_IOMEM_MAIN, ISP_TCTRL_CTRL, | |
| ISPTCTRL_CTRL_DIVB_MASK, | |
| divider << ISPTCTRL_CTRL_DIVB_SHIFT); | |
| break; | |
| } | |
| } | |
| static int isp_xclk_prepare(struct clk_hw *hw) | |
| { | |
| struct isp_xclk *xclk = to_isp_xclk(hw); | |
| omap3isp_get(xclk->isp); | |
| return 0; | |
| } | |
| static void isp_xclk_unprepare(struct clk_hw *hw) | |
| { | |
| struct isp_xclk *xclk = to_isp_xclk(hw); | |
| omap3isp_put(xclk->isp); | |
| } | |
| static int isp_xclk_enable(struct clk_hw *hw) | |
| { | |
| struct isp_xclk *xclk = to_isp_xclk(hw); | |
| unsigned long flags; | |
| spin_lock_irqsave(&xclk->lock, flags); | |
| isp_xclk_update(xclk, xclk->divider); | |
| xclk->enabled = true; | |
| spin_unlock_irqrestore(&xclk->lock, flags); | |
| return 0; | |
| } | |
| static void isp_xclk_disable(struct clk_hw *hw) | |
| { | |
| struct isp_xclk *xclk = to_isp_xclk(hw); | |
| unsigned long flags; | |
| spin_lock_irqsave(&xclk->lock, flags); | |
| isp_xclk_update(xclk, 0); | |
| xclk->enabled = false; | |
| spin_unlock_irqrestore(&xclk->lock, flags); | |
| } | |
| static unsigned long isp_xclk_recalc_rate(struct clk_hw *hw, | |
| unsigned long parent_rate) | |
| { | |
| struct isp_xclk *xclk = to_isp_xclk(hw); | |
| return parent_rate / xclk->divider; | |
| } | |
| static u32 isp_xclk_calc_divider(unsigned long *rate, unsigned long parent_rate) | |
| { | |
| u32 divider; | |
| if (*rate >= parent_rate) { | |
| *rate = parent_rate; | |
| return ISPTCTRL_CTRL_DIV_BYPASS; | |
| } | |
| if (*rate == 0) | |
| *rate = 1; | |
| divider = DIV_ROUND_CLOSEST(parent_rate, *rate); | |
| if (divider >= ISPTCTRL_CTRL_DIV_BYPASS) | |
| divider = ISPTCTRL_CTRL_DIV_BYPASS - 1; | |
| *rate = parent_rate / divider; | |
| return divider; | |
| } | |
| static long isp_xclk_round_rate(struct clk_hw *hw, unsigned long rate, | |
| unsigned long *parent_rate) | |
| { | |
| isp_xclk_calc_divider(&rate, *parent_rate); | |
| return rate; | |
| } | |
| static int isp_xclk_set_rate(struct clk_hw *hw, unsigned long rate, | |
| unsigned long parent_rate) | |
| { | |
| struct isp_xclk *xclk = to_isp_xclk(hw); | |
| unsigned long flags; | |
| u32 divider; | |
| divider = isp_xclk_calc_divider(&rate, parent_rate); | |
| spin_lock_irqsave(&xclk->lock, flags); | |
| xclk->divider = divider; | |
| if (xclk->enabled) | |
| isp_xclk_update(xclk, divider); | |
| spin_unlock_irqrestore(&xclk->lock, flags); | |
| dev_dbg(xclk->isp->dev, "%s: cam_xclk%c set to %lu Hz (div %u)\n", | |
| __func__, xclk->id == ISP_XCLK_A ? 'a' : 'b', rate, divider); | |
| return 0; | |
| } | |
| static const struct clk_ops isp_xclk_ops = { | |
| .prepare = isp_xclk_prepare, | |
| .unprepare = isp_xclk_unprepare, | |
| .enable = isp_xclk_enable, | |
| .disable = isp_xclk_disable, | |
| .recalc_rate = isp_xclk_recalc_rate, | |
| .round_rate = isp_xclk_round_rate, | |
| .set_rate = isp_xclk_set_rate, | |
| }; | |
| static const char *isp_xclk_parent_name = "cam_mclk"; | |
| static const struct clk_init_data isp_xclk_init_data = { | |
| .name = "cam_xclk", | |
| .ops = &isp_xclk_ops, | |
| .parent_names = &isp_xclk_parent_name, | |
| .num_parents = 1, | |
| }; | |
| static struct clk *isp_xclk_src_get(struct of_phandle_args *clkspec, void *data) | |
| { | |
| unsigned int idx = clkspec->args[0]; | |
| struct isp_device *isp = data; | |
| if (idx >= ARRAY_SIZE(isp->xclks)) | |
| return ERR_PTR(-ENOENT); | |
| return isp->xclks[idx].clk; | |
| } | |
| static int isp_xclk_init(struct isp_device *isp) | |
| { | |
| struct device_node *np = isp->dev->of_node; | |
| struct clk_init_data init = { 0 }; | |
| unsigned int i; | |
| for (i = 0; i < ARRAY_SIZE(isp->xclks); ++i) | |
| isp->xclks[i].clk = ERR_PTR(-EINVAL); | |
| for (i = 0; i < ARRAY_SIZE(isp->xclks); ++i) { | |
| struct isp_xclk *xclk = &isp->xclks[i]; | |
| xclk->isp = isp; | |
| xclk->id = i == 0 ? ISP_XCLK_A : ISP_XCLK_B; | |
| xclk->divider = 1; | |
| spin_lock_init(&xclk->lock); | |
| init.name = i == 0 ? "cam_xclka" : "cam_xclkb"; | |
| init.ops = &isp_xclk_ops; | |
| init.parent_names = &isp_xclk_parent_name; | |
| init.num_parents = 1; | |
| xclk->hw.init = &init; | |
| /* | |
| * The first argument is NULL in order to avoid circular | |
| * reference, as this driver takes reference on the | |
| * sensor subdevice modules and the sensors would take | |
| * reference on this module through clk_get(). | |
| */ | |
| xclk->clk = clk_register(NULL, &xclk->hw); | |
| if (IS_ERR(xclk->clk)) | |
| return PTR_ERR(xclk->clk); | |
| } | |
| if (np) | |
| of_clk_add_provider(np, isp_xclk_src_get, isp); | |
| return 0; | |
| } | |
| static void isp_xclk_cleanup(struct isp_device *isp) | |
| { | |
| struct device_node *np = isp->dev->of_node; | |
| unsigned int i; | |
| if (np) | |
| of_clk_del_provider(np); | |
| for (i = 0; i < ARRAY_SIZE(isp->xclks); ++i) { | |
| struct isp_xclk *xclk = &isp->xclks[i]; | |
| if (!IS_ERR(xclk->clk)) | |
| clk_unregister(xclk->clk); | |
| } | |
| } | |
| /* ----------------------------------------------------------------------------- | |
| * Interrupts | |
| */ | |
| /* | |
| * isp_enable_interrupts - Enable ISP interrupts. | |
| * @isp: OMAP3 ISP device | |
| */ | |
| static void isp_enable_interrupts(struct isp_device *isp) | |
| { | |
| static const u32 irq = IRQ0ENABLE_CSIA_IRQ | |
| | IRQ0ENABLE_CSIB_IRQ | |
| | IRQ0ENABLE_CCDC_LSC_PREF_ERR_IRQ | |
| | IRQ0ENABLE_CCDC_LSC_DONE_IRQ | |
| | IRQ0ENABLE_CCDC_VD0_IRQ | |
| | IRQ0ENABLE_CCDC_VD1_IRQ | |
| | IRQ0ENABLE_HS_VS_IRQ | |
| | IRQ0ENABLE_HIST_DONE_IRQ | |
| | IRQ0ENABLE_H3A_AWB_DONE_IRQ | |
| | IRQ0ENABLE_H3A_AF_DONE_IRQ | |
| | IRQ0ENABLE_PRV_DONE_IRQ | |
| | IRQ0ENABLE_RSZ_DONE_IRQ; | |
| isp_reg_writel(isp, irq, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS); | |
| isp_reg_writel(isp, irq, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE); | |
| } | |
| /* | |
| * isp_disable_interrupts - Disable ISP interrupts. | |
| * @isp: OMAP3 ISP device | |
| */ | |
| static void isp_disable_interrupts(struct isp_device *isp) | |
| { | |
| isp_reg_writel(isp, 0, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0ENABLE); | |
| } | |
| /* | |
| * isp_core_init - ISP core settings | |
| * @isp: OMAP3 ISP device | |
| * @idle: Consider idle state. | |
| * | |
| * Set the power settings for the ISP and SBL bus and configure the HS/VS | |
| * interrupt source. | |
| * | |
| * We need to configure the HS/VS interrupt source before interrupts get | |
| * enabled, as the sensor might be free-running and the ISP default setting | |
| * (HS edge) would put an unnecessary burden on the CPU. | |
| */ | |
| static void isp_core_init(struct isp_device *isp, int idle) | |
| { | |
| isp_reg_writel(isp, | |
| ((idle ? ISP_SYSCONFIG_MIDLEMODE_SMARTSTANDBY : | |
| ISP_SYSCONFIG_MIDLEMODE_FORCESTANDBY) << | |
| ISP_SYSCONFIG_MIDLEMODE_SHIFT) | | |
| ((isp->revision == ISP_REVISION_15_0) ? | |
| ISP_SYSCONFIG_AUTOIDLE : 0), | |
| OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG); | |
| isp_reg_writel(isp, | |
| (isp->autoidle ? ISPCTRL_SBL_AUTOIDLE : 0) | | |
| ISPCTRL_SYNC_DETECT_VSRISE, | |
| OMAP3_ISP_IOMEM_MAIN, ISP_CTRL); | |
| } | |
| /* | |
| * Configure the bridge and lane shifter. Valid inputs are | |
| * | |
| * CCDC_INPUT_PARALLEL: Parallel interface | |
| * CCDC_INPUT_CSI2A: CSI2a receiver | |
| * CCDC_INPUT_CCP2B: CCP2b receiver | |
| * CCDC_INPUT_CSI2C: CSI2c receiver | |
| * | |
| * The bridge and lane shifter are configured according to the selected input | |
| * and the ISP platform data. | |
| */ | |
| void omap3isp_configure_bridge(struct isp_device *isp, | |
| enum ccdc_input_entity input, | |
| const struct isp_parallel_cfg *parcfg, | |
| unsigned int shift, unsigned int bridge) | |
| { | |
| u32 ispctrl_val; | |
| ispctrl_val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL); | |
| ispctrl_val &= ~ISPCTRL_SHIFT_MASK; | |
| ispctrl_val &= ~ISPCTRL_PAR_CLK_POL_INV; | |
| ispctrl_val &= ~ISPCTRL_PAR_SER_CLK_SEL_MASK; | |
| ispctrl_val &= ~ISPCTRL_PAR_BRIDGE_MASK; | |
| ispctrl_val |= bridge; | |
| switch (input) { | |
| case CCDC_INPUT_PARALLEL: | |
| ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_PARALLEL; | |
| ispctrl_val |= parcfg->clk_pol << ISPCTRL_PAR_CLK_POL_SHIFT; | |
| shift += parcfg->data_lane_shift; | |
| break; | |
| case CCDC_INPUT_CSI2A: | |
| ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_CSIA; | |
| break; | |
| case CCDC_INPUT_CCP2B: | |
| ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_CSIB; | |
| break; | |
| case CCDC_INPUT_CSI2C: | |
| ispctrl_val |= ISPCTRL_PAR_SER_CLK_SEL_CSIC; | |
| break; | |
| default: | |
| return; | |
| } | |
| ispctrl_val |= ((shift/2) << ISPCTRL_SHIFT_SHIFT) & ISPCTRL_SHIFT_MASK; | |
| isp_reg_writel(isp, ispctrl_val, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL); | |
| } | |
| void omap3isp_hist_dma_done(struct isp_device *isp) | |
| { | |
| if (omap3isp_ccdc_busy(&isp->isp_ccdc) || | |
| omap3isp_stat_pcr_busy(&isp->isp_hist)) { | |
| /* Histogram cannot be enabled in this frame anymore */ | |
| atomic_set(&isp->isp_hist.buf_err, 1); | |
| dev_dbg(isp->dev, | |
| "hist: Out of synchronization with CCDC. Ignoring next buffer.\n"); | |
| } | |
| } | |
| static inline void isp_isr_dbg(struct isp_device *isp, u32 irqstatus) | |
| { | |
| static const char *name[] = { | |
| "CSIA_IRQ", | |
| "res1", | |
| "res2", | |
| "CSIB_LCM_IRQ", | |
| "CSIB_IRQ", | |
| "res5", | |
| "res6", | |
| "res7", | |
| "CCDC_VD0_IRQ", | |
| "CCDC_VD1_IRQ", | |
| "CCDC_VD2_IRQ", | |
| "CCDC_ERR_IRQ", | |
| "H3A_AF_DONE_IRQ", | |
| "H3A_AWB_DONE_IRQ", | |
| "res14", | |
| "res15", | |
| "HIST_DONE_IRQ", | |
| "CCDC_LSC_DONE", | |
| "CCDC_LSC_PREFETCH_COMPLETED", | |
| "CCDC_LSC_PREFETCH_ERROR", | |
| "PRV_DONE_IRQ", | |
| "CBUFF_IRQ", | |
| "res22", | |
| "res23", | |
| "RSZ_DONE_IRQ", | |
| "OVF_IRQ", | |
| "res26", | |
| "res27", | |
| "MMU_ERR_IRQ", | |
| "OCP_ERR_IRQ", | |
| "SEC_ERR_IRQ", | |
| "HS_VS_IRQ", | |
| }; | |
| int i; | |
| dev_dbg(isp->dev, "ISP IRQ: "); | |
| for (i = 0; i < ARRAY_SIZE(name); i++) { | |
| if ((1 << i) & irqstatus) | |
| printk(KERN_CONT "%s ", name[i]); | |
| } | |
| printk(KERN_CONT "\n"); | |
| } | |
| static void isp_isr_sbl(struct isp_device *isp) | |
| { | |
| struct device *dev = isp->dev; | |
| struct isp_pipeline *pipe; | |
| u32 sbl_pcr; | |
| /* | |
| * Handle shared buffer logic overflows for video buffers. | |
| * ISPSBL_PCR_CCDCPRV_2_RSZ_OVF can be safely ignored. | |
| */ | |
| sbl_pcr = isp_reg_readl(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_PCR); | |
| isp_reg_writel(isp, sbl_pcr, OMAP3_ISP_IOMEM_SBL, ISPSBL_PCR); | |
| sbl_pcr &= ~ISPSBL_PCR_CCDCPRV_2_RSZ_OVF; | |
| if (sbl_pcr) | |
| dev_dbg(dev, "SBL overflow (PCR = 0x%08x)\n", sbl_pcr); | |
| if (sbl_pcr & ISPSBL_PCR_CSIB_WBL_OVF) { | |
| pipe = to_isp_pipeline(&isp->isp_ccp2.subdev.entity); | |
| if (pipe != NULL) | |
| pipe->error = true; | |
| } | |
| if (sbl_pcr & ISPSBL_PCR_CSIA_WBL_OVF) { | |
| pipe = to_isp_pipeline(&isp->isp_csi2a.subdev.entity); | |
| if (pipe != NULL) | |
| pipe->error = true; | |
| } | |
| if (sbl_pcr & ISPSBL_PCR_CCDC_WBL_OVF) { | |
| pipe = to_isp_pipeline(&isp->isp_ccdc.subdev.entity); | |
| if (pipe != NULL) | |
| pipe->error = true; | |
| } | |
| if (sbl_pcr & ISPSBL_PCR_PRV_WBL_OVF) { | |
| pipe = to_isp_pipeline(&isp->isp_prev.subdev.entity); | |
| if (pipe != NULL) | |
| pipe->error = true; | |
| } | |
| if (sbl_pcr & (ISPSBL_PCR_RSZ1_WBL_OVF | |
| | ISPSBL_PCR_RSZ2_WBL_OVF | |
| | ISPSBL_PCR_RSZ3_WBL_OVF | |
| | ISPSBL_PCR_RSZ4_WBL_OVF)) { | |
| pipe = to_isp_pipeline(&isp->isp_res.subdev.entity); | |
| if (pipe != NULL) | |
| pipe->error = true; | |
| } | |
| if (sbl_pcr & ISPSBL_PCR_H3A_AF_WBL_OVF) | |
| omap3isp_stat_sbl_overflow(&isp->isp_af); | |
| if (sbl_pcr & ISPSBL_PCR_H3A_AEAWB_WBL_OVF) | |
| omap3isp_stat_sbl_overflow(&isp->isp_aewb); | |
| } | |
| /* | |
| * isp_isr - Interrupt Service Routine for Camera ISP module. | |
| * @irq: Not used currently. | |
| * @_isp: Pointer to the OMAP3 ISP device | |
| * | |
| * Handles the corresponding callback if plugged in. | |
| */ | |
| static irqreturn_t isp_isr(int irq, void *_isp) | |
| { | |
| static const u32 ccdc_events = IRQ0STATUS_CCDC_LSC_PREF_ERR_IRQ | | |
| IRQ0STATUS_CCDC_LSC_DONE_IRQ | | |
| IRQ0STATUS_CCDC_VD0_IRQ | | |
| IRQ0STATUS_CCDC_VD1_IRQ | | |
| IRQ0STATUS_HS_VS_IRQ; | |
| struct isp_device *isp = _isp; | |
| u32 irqstatus; | |
| irqstatus = isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS); | |
| isp_reg_writel(isp, irqstatus, OMAP3_ISP_IOMEM_MAIN, ISP_IRQ0STATUS); | |
| isp_isr_sbl(isp); | |
| if (irqstatus & IRQ0STATUS_CSIA_IRQ) | |
| omap3isp_csi2_isr(&isp->isp_csi2a); | |
| if (irqstatus & IRQ0STATUS_CSIB_IRQ) | |
| omap3isp_ccp2_isr(&isp->isp_ccp2); | |
| if (irqstatus & IRQ0STATUS_CCDC_VD0_IRQ) { | |
| if (isp->isp_ccdc.output & CCDC_OUTPUT_PREVIEW) | |
| omap3isp_preview_isr_frame_sync(&isp->isp_prev); | |
| if (isp->isp_ccdc.output & CCDC_OUTPUT_RESIZER) | |
| omap3isp_resizer_isr_frame_sync(&isp->isp_res); | |
| omap3isp_stat_isr_frame_sync(&isp->isp_aewb); | |
| omap3isp_stat_isr_frame_sync(&isp->isp_af); | |
| omap3isp_stat_isr_frame_sync(&isp->isp_hist); | |
| } | |
| if (irqstatus & ccdc_events) | |
| omap3isp_ccdc_isr(&isp->isp_ccdc, irqstatus & ccdc_events); | |
| if (irqstatus & IRQ0STATUS_PRV_DONE_IRQ) { | |
| if (isp->isp_prev.output & PREVIEW_OUTPUT_RESIZER) | |
| omap3isp_resizer_isr_frame_sync(&isp->isp_res); | |
| omap3isp_preview_isr(&isp->isp_prev); | |
| } | |
| if (irqstatus & IRQ0STATUS_RSZ_DONE_IRQ) | |
| omap3isp_resizer_isr(&isp->isp_res); | |
| if (irqstatus & IRQ0STATUS_H3A_AWB_DONE_IRQ) | |
| omap3isp_stat_isr(&isp->isp_aewb); | |
| if (irqstatus & IRQ0STATUS_H3A_AF_DONE_IRQ) | |
| omap3isp_stat_isr(&isp->isp_af); | |
| if (irqstatus & IRQ0STATUS_HIST_DONE_IRQ) | |
| omap3isp_stat_isr(&isp->isp_hist); | |
| omap3isp_flush(isp); | |
| #if defined(DEBUG) && defined(ISP_ISR_DEBUG) | |
| isp_isr_dbg(isp, irqstatus); | |
| #endif | |
| return IRQ_HANDLED; | |
| } | |
| static const struct media_device_ops isp_media_ops = { | |
| .link_notify = v4l2_pipeline_link_notify, | |
| }; | |
| /* ----------------------------------------------------------------------------- | |
| * Pipeline stream management | |
| */ | |
| /* | |
| * isp_pipeline_enable - Enable streaming on a pipeline | |
| * @pipe: ISP pipeline | |
| * @mode: Stream mode (single shot or continuous) | |
| * | |
| * Walk the entities chain starting at the pipeline output video node and start | |
| * all modules in the chain in the given mode. | |
| * | |
| * Return 0 if successful, or the return value of the failed video::s_stream | |
| * operation otherwise. | |
| */ | |
| static int isp_pipeline_enable(struct isp_pipeline *pipe, | |
| enum isp_pipeline_stream_state mode) | |
| { | |
| struct isp_device *isp = pipe->output->isp; | |
| struct media_entity *entity; | |
| struct media_pad *pad; | |
| struct v4l2_subdev *subdev; | |
| unsigned long flags; | |
| int ret; | |
| /* Refuse to start streaming if an entity included in the pipeline has | |
| * crashed. This check must be performed before the loop below to avoid | |
| * starting entities if the pipeline won't start anyway (those entities | |
| * would then likely fail to stop, making the problem worse). | |
| */ | |
| if (media_entity_enum_intersects(&pipe->ent_enum, &isp->crashed)) | |
| return -EIO; | |
| spin_lock_irqsave(&pipe->lock, flags); | |
| pipe->state &= ~(ISP_PIPELINE_IDLE_INPUT | ISP_PIPELINE_IDLE_OUTPUT); | |
| spin_unlock_irqrestore(&pipe->lock, flags); | |
| pipe->do_propagation = false; | |
| entity = &pipe->output->video.entity; | |
| while (1) { | |
| pad = &entity->pads[0]; | |
| if (!(pad->flags & MEDIA_PAD_FL_SINK)) | |
| break; | |
| pad = media_entity_remote_pad(pad); | |
| if (!pad || !is_media_entity_v4l2_subdev(pad->entity)) | |
| break; | |
| entity = pad->entity; | |
| subdev = media_entity_to_v4l2_subdev(entity); | |
| ret = v4l2_subdev_call(subdev, video, s_stream, mode); | |
| if (ret < 0 && ret != -ENOIOCTLCMD) | |
| return ret; | |
| if (subdev == &isp->isp_ccdc.subdev) { | |
| v4l2_subdev_call(&isp->isp_aewb.subdev, video, | |
| s_stream, mode); | |
| v4l2_subdev_call(&isp->isp_af.subdev, video, | |
| s_stream, mode); | |
| v4l2_subdev_call(&isp->isp_hist.subdev, video, | |
| s_stream, mode); | |
| pipe->do_propagation = true; | |
| } | |
| } | |
| return 0; | |
| } | |
| static int isp_pipeline_wait_resizer(struct isp_device *isp) | |
| { | |
| return omap3isp_resizer_busy(&isp->isp_res); | |
| } | |
| static int isp_pipeline_wait_preview(struct isp_device *isp) | |
| { | |
| return omap3isp_preview_busy(&isp->isp_prev); | |
| } | |
| static int isp_pipeline_wait_ccdc(struct isp_device *isp) | |
| { | |
| return omap3isp_stat_busy(&isp->isp_af) | |
| || omap3isp_stat_busy(&isp->isp_aewb) | |
| || omap3isp_stat_busy(&isp->isp_hist) | |
| || omap3isp_ccdc_busy(&isp->isp_ccdc); | |
| } | |
| #define ISP_STOP_TIMEOUT msecs_to_jiffies(1000) | |
| static int isp_pipeline_wait(struct isp_device *isp, | |
| int(*busy)(struct isp_device *isp)) | |
| { | |
| unsigned long timeout = jiffies + ISP_STOP_TIMEOUT; | |
| while (!time_after(jiffies, timeout)) { | |
| if (!busy(isp)) | |
| return 0; | |
| } | |
| return 1; | |
| } | |
| /* | |
| * isp_pipeline_disable - Disable streaming on a pipeline | |
| * @pipe: ISP pipeline | |
| * | |
| * Walk the entities chain starting at the pipeline output video node and stop | |
| * all modules in the chain. Wait synchronously for the modules to be stopped if | |
| * necessary. | |
| * | |
| * Return 0 if all modules have been properly stopped, or -ETIMEDOUT if a module | |
| * can't be stopped (in which case a software reset of the ISP is probably | |
| * necessary). | |
| */ | |
| static int isp_pipeline_disable(struct isp_pipeline *pipe) | |
| { | |
| struct isp_device *isp = pipe->output->isp; | |
| struct media_entity *entity; | |
| struct media_pad *pad; | |
| struct v4l2_subdev *subdev; | |
| int failure = 0; | |
| int ret; | |
| /* | |
| * We need to stop all the modules after CCDC first or they'll | |
| * never stop since they may not get a full frame from CCDC. | |
| */ | |
| entity = &pipe->output->video.entity; | |
| while (1) { | |
| pad = &entity->pads[0]; | |
| if (!(pad->flags & MEDIA_PAD_FL_SINK)) | |
| break; | |
| pad = media_entity_remote_pad(pad); | |
| if (!pad || !is_media_entity_v4l2_subdev(pad->entity)) | |
| break; | |
| entity = pad->entity; | |
| subdev = media_entity_to_v4l2_subdev(entity); | |
| if (subdev == &isp->isp_ccdc.subdev) { | |
| v4l2_subdev_call(&isp->isp_aewb.subdev, | |
| video, s_stream, 0); | |
| v4l2_subdev_call(&isp->isp_af.subdev, | |
| video, s_stream, 0); | |
| v4l2_subdev_call(&isp->isp_hist.subdev, | |
| video, s_stream, 0); | |
| } | |
| ret = v4l2_subdev_call(subdev, video, s_stream, 0); | |
| if (subdev == &isp->isp_res.subdev) | |
| ret |= isp_pipeline_wait(isp, isp_pipeline_wait_resizer); | |
| else if (subdev == &isp->isp_prev.subdev) | |
| ret |= isp_pipeline_wait(isp, isp_pipeline_wait_preview); | |
| else if (subdev == &isp->isp_ccdc.subdev) | |
| ret |= isp_pipeline_wait(isp, isp_pipeline_wait_ccdc); | |
| /* Handle stop failures. An entity that fails to stop can | |
| * usually just be restarted. Flag the stop failure nonetheless | |
| * to trigger an ISP reset the next time the device is released, | |
| * just in case. | |
| * | |
| * The preview engine is a special case. A failure to stop can | |
| * mean a hardware crash. When that happens the preview engine | |
| * won't respond to read/write operations on the L4 bus anymore, | |
| * resulting in a bus fault and a kernel oops next time it gets | |
| * accessed. Mark it as crashed to prevent pipelines including | |
| * it from being started. | |
| */ | |
| if (ret) { | |
| dev_info(isp->dev, "Unable to stop %s\n", subdev->name); | |
| isp->stop_failure = true; | |
| if (subdev == &isp->isp_prev.subdev) | |
| media_entity_enum_set(&isp->crashed, | |
| &subdev->entity); | |
| failure = -ETIMEDOUT; | |
| } | |
| } | |
| return failure; | |
| } | |
| /* | |
| * omap3isp_pipeline_set_stream - Enable/disable streaming on a pipeline | |
| * @pipe: ISP pipeline | |
| * @state: Stream state (stopped, single shot or continuous) | |
| * | |
| * Set the pipeline to the given stream state. Pipelines can be started in | |
| * single-shot or continuous mode. | |
| * | |
| * Return 0 if successful, or the return value of the failed video::s_stream | |
| * operation otherwise. The pipeline state is not updated when the operation | |
| * fails, except when stopping the pipeline. | |
| */ | |
| int omap3isp_pipeline_set_stream(struct isp_pipeline *pipe, | |
| enum isp_pipeline_stream_state state) | |
| { | |
| int ret; | |
| if (state == ISP_PIPELINE_STREAM_STOPPED) | |
| ret = isp_pipeline_disable(pipe); | |
| else | |
| ret = isp_pipeline_enable(pipe, state); | |
| if (ret == 0 || state == ISP_PIPELINE_STREAM_STOPPED) | |
| pipe->stream_state = state; | |
| return ret; | |
| } | |
| /* | |
| * omap3isp_pipeline_cancel_stream - Cancel stream on a pipeline | |
| * @pipe: ISP pipeline | |
| * | |
| * Cancelling a stream mark all buffers on all video nodes in the pipeline as | |
| * erroneous and makes sure no new buffer can be queued. This function is called | |
| * when a fatal error that prevents any further operation on the pipeline | |
| * occurs. | |
| */ | |
| void omap3isp_pipeline_cancel_stream(struct isp_pipeline *pipe) | |
| { | |
| if (pipe->input) | |
| omap3isp_video_cancel_stream(pipe->input); | |
| if (pipe->output) | |
| omap3isp_video_cancel_stream(pipe->output); | |
| } | |
| /* | |
| * isp_pipeline_resume - Resume streaming on a pipeline | |
| * @pipe: ISP pipeline | |
| * | |
| * Resume video output and input and re-enable pipeline. | |
| */ | |
| static void isp_pipeline_resume(struct isp_pipeline *pipe) | |
| { | |
| int singleshot = pipe->stream_state == ISP_PIPELINE_STREAM_SINGLESHOT; | |
| omap3isp_video_resume(pipe->output, !singleshot); | |
| if (singleshot) | |
| omap3isp_video_resume(pipe->input, 0); | |
| isp_pipeline_enable(pipe, pipe->stream_state); | |
| } | |
| /* | |
| * isp_pipeline_suspend - Suspend streaming on a pipeline | |
| * @pipe: ISP pipeline | |
| * | |
| * Suspend pipeline. | |
| */ | |
| static void isp_pipeline_suspend(struct isp_pipeline *pipe) | |
| { | |
| isp_pipeline_disable(pipe); | |
| } | |
| /* | |
| * isp_pipeline_is_last - Verify if entity has an enabled link to the output | |
| * video node | |
| * @me: ISP module's media entity | |
| * | |
| * Returns 1 if the entity has an enabled link to the output video node or 0 | |
| * otherwise. It's true only while pipeline can have no more than one output | |
| * node. | |
| */ | |
| static int isp_pipeline_is_last(struct media_entity *me) | |
| { | |
| struct isp_pipeline *pipe; | |
| struct media_pad *pad; | |
| if (!me->pipe) | |
| return 0; | |
| pipe = to_isp_pipeline(me); | |
| if (pipe->stream_state == ISP_PIPELINE_STREAM_STOPPED) | |
| return 0; | |
| pad = media_entity_remote_pad(&pipe->output->pad); | |
| return pad->entity == me; | |
| } | |
| /* | |
| * isp_suspend_module_pipeline - Suspend pipeline to which belongs the module | |
| * @me: ISP module's media entity | |
| * | |
| * Suspend the whole pipeline if module's entity has an enabled link to the | |
| * output video node. It works only while pipeline can have no more than one | |
| * output node. | |
| */ | |
| static void isp_suspend_module_pipeline(struct media_entity *me) | |
| { | |
| if (isp_pipeline_is_last(me)) | |
| isp_pipeline_suspend(to_isp_pipeline(me)); | |
| } | |
| /* | |
| * isp_resume_module_pipeline - Resume pipeline to which belongs the module | |
| * @me: ISP module's media entity | |
| * | |
| * Resume the whole pipeline if module's entity has an enabled link to the | |
| * output video node. It works only while pipeline can have no more than one | |
| * output node. | |
| */ | |
| static void isp_resume_module_pipeline(struct media_entity *me) | |
| { | |
| if (isp_pipeline_is_last(me)) | |
| isp_pipeline_resume(to_isp_pipeline(me)); | |
| } | |
| /* | |
| * isp_suspend_modules - Suspend ISP submodules. | |
| * @isp: OMAP3 ISP device | |
| * | |
| * Returns 0 if suspend left in idle state all the submodules properly, | |
| * or returns 1 if a general Reset is required to suspend the submodules. | |
| */ | |
| static int isp_suspend_modules(struct isp_device *isp) | |
| { | |
| unsigned long timeout; | |
| omap3isp_stat_suspend(&isp->isp_aewb); | |
| omap3isp_stat_suspend(&isp->isp_af); | |
| omap3isp_stat_suspend(&isp->isp_hist); | |
| isp_suspend_module_pipeline(&isp->isp_res.subdev.entity); | |
| isp_suspend_module_pipeline(&isp->isp_prev.subdev.entity); | |
| isp_suspend_module_pipeline(&isp->isp_ccdc.subdev.entity); | |
| isp_suspend_module_pipeline(&isp->isp_csi2a.subdev.entity); | |
| isp_suspend_module_pipeline(&isp->isp_ccp2.subdev.entity); | |
| timeout = jiffies + ISP_STOP_TIMEOUT; | |
| while (omap3isp_stat_busy(&isp->isp_af) | |
| || omap3isp_stat_busy(&isp->isp_aewb) | |
| || omap3isp_stat_busy(&isp->isp_hist) | |
| || omap3isp_preview_busy(&isp->isp_prev) | |
| || omap3isp_resizer_busy(&isp->isp_res) | |
| || omap3isp_ccdc_busy(&isp->isp_ccdc)) { | |
| if (time_after(jiffies, timeout)) { | |
| dev_info(isp->dev, "can't stop modules.\n"); | |
| return 1; | |
| } | |
| msleep(1); | |
| } | |
| return 0; | |
| } | |
| /* | |
| * isp_resume_modules - Resume ISP submodules. | |
| * @isp: OMAP3 ISP device | |
| */ | |
| static void isp_resume_modules(struct isp_device *isp) | |
| { | |
| omap3isp_stat_resume(&isp->isp_aewb); | |
| omap3isp_stat_resume(&isp->isp_af); | |
| omap3isp_stat_resume(&isp->isp_hist); | |
| isp_resume_module_pipeline(&isp->isp_res.subdev.entity); | |
| isp_resume_module_pipeline(&isp->isp_prev.subdev.entity); | |
| isp_resume_module_pipeline(&isp->isp_ccdc.subdev.entity); | |
| isp_resume_module_pipeline(&isp->isp_csi2a.subdev.entity); | |
| isp_resume_module_pipeline(&isp->isp_ccp2.subdev.entity); | |
| } | |
| /* | |
| * isp_reset - Reset ISP with a timeout wait for idle. | |
| * @isp: OMAP3 ISP device | |
| */ | |
| static int isp_reset(struct isp_device *isp) | |
| { | |
| unsigned long timeout = 0; | |
| isp_reg_writel(isp, | |
| isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG) | |
| | ISP_SYSCONFIG_SOFTRESET, | |
| OMAP3_ISP_IOMEM_MAIN, ISP_SYSCONFIG); | |
| while (!(isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, | |
| ISP_SYSSTATUS) & 0x1)) { | |
| if (timeout++ > 10000) { | |
| dev_alert(isp->dev, "cannot reset ISP\n"); | |
| return -ETIMEDOUT; | |
| } | |
| udelay(1); | |
| } | |
| isp->stop_failure = false; | |
| media_entity_enum_zero(&isp->crashed); | |
| return 0; | |
| } | |
| /* | |
| * isp_save_context - Saves the values of the ISP module registers. | |
| * @isp: OMAP3 ISP device | |
| * @reg_list: Structure containing pairs of register address and value to | |
| * modify on OMAP. | |
| */ | |
| static void | |
| isp_save_context(struct isp_device *isp, struct isp_reg *reg_list) | |
| { | |
| struct isp_reg *next = reg_list; | |
| for (; next->reg != ISP_TOK_TERM; next++) | |
| next->val = isp_reg_readl(isp, next->mmio_range, next->reg); | |
| } | |
| /* | |
| * isp_restore_context - Restores the values of the ISP module registers. | |
| * @isp: OMAP3 ISP device | |
| * @reg_list: Structure containing pairs of register address and value to | |
| * modify on OMAP. | |
| */ | |
| static void | |
| isp_restore_context(struct isp_device *isp, struct isp_reg *reg_list) | |
| { | |
| struct isp_reg *next = reg_list; | |
| for (; next->reg != ISP_TOK_TERM; next++) | |
| isp_reg_writel(isp, next->val, next->mmio_range, next->reg); | |
| } | |
| /* | |
| * isp_save_ctx - Saves ISP, CCDC, HIST, H3A, PREV, RESZ & MMU context. | |
| * @isp: OMAP3 ISP device | |
| * | |
| * Routine for saving the context of each module in the ISP. | |
| * CCDC, HIST, H3A, PREV, RESZ and MMU. | |
| */ | |
| static void isp_save_ctx(struct isp_device *isp) | |
| { | |
| isp_save_context(isp, isp_reg_list); | |
| omap_iommu_save_ctx(isp->dev); | |
| } | |
| /* | |
| * isp_restore_ctx - Restores ISP, CCDC, HIST, H3A, PREV, RESZ & MMU context. | |
| * @isp: OMAP3 ISP device | |
| * | |
| * Routine for restoring the context of each module in the ISP. | |
| * CCDC, HIST, H3A, PREV, RESZ and MMU. | |
| */ | |
| static void isp_restore_ctx(struct isp_device *isp) | |
| { | |
| isp_restore_context(isp, isp_reg_list); | |
| omap_iommu_restore_ctx(isp->dev); | |
| omap3isp_ccdc_restore_context(isp); | |
| omap3isp_preview_restore_context(isp); | |
| } | |
| /* ----------------------------------------------------------------------------- | |
| * SBL resources management | |
| */ | |
| #define OMAP3_ISP_SBL_READ (OMAP3_ISP_SBL_CSI1_READ | \ | |
| OMAP3_ISP_SBL_CCDC_LSC_READ | \ | |
| OMAP3_ISP_SBL_PREVIEW_READ | \ | |
| OMAP3_ISP_SBL_RESIZER_READ) | |
| #define OMAP3_ISP_SBL_WRITE (OMAP3_ISP_SBL_CSI1_WRITE | \ | |
| OMAP3_ISP_SBL_CSI2A_WRITE | \ | |
| OMAP3_ISP_SBL_CSI2C_WRITE | \ | |
| OMAP3_ISP_SBL_CCDC_WRITE | \ | |
| OMAP3_ISP_SBL_PREVIEW_WRITE) | |
| void omap3isp_sbl_enable(struct isp_device *isp, enum isp_sbl_resource res) | |
| { | |
| u32 sbl = 0; | |
| isp->sbl_resources |= res; | |
| if (isp->sbl_resources & OMAP3_ISP_SBL_CSI1_READ) | |
| sbl |= ISPCTRL_SBL_SHARED_RPORTA; | |
| if (isp->sbl_resources & OMAP3_ISP_SBL_CCDC_LSC_READ) | |
| sbl |= ISPCTRL_SBL_SHARED_RPORTB; | |
| if (isp->sbl_resources & OMAP3_ISP_SBL_CSI2C_WRITE) | |
| sbl |= ISPCTRL_SBL_SHARED_WPORTC; | |
| if (isp->sbl_resources & OMAP3_ISP_SBL_RESIZER_WRITE) | |
| sbl |= ISPCTRL_SBL_WR0_RAM_EN; | |
| if (isp->sbl_resources & OMAP3_ISP_SBL_WRITE) | |
| sbl |= ISPCTRL_SBL_WR1_RAM_EN; | |
| if (isp->sbl_resources & OMAP3_ISP_SBL_READ) | |
| sbl |= ISPCTRL_SBL_RD_RAM_EN; | |
| isp_reg_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, sbl); | |
| } | |
| void omap3isp_sbl_disable(struct isp_device *isp, enum isp_sbl_resource res) | |
| { | |
| u32 sbl = 0; | |
| isp->sbl_resources &= ~res; | |
| if (!(isp->sbl_resources & OMAP3_ISP_SBL_CSI1_READ)) | |
| sbl |= ISPCTRL_SBL_SHARED_RPORTA; | |
| if (!(isp->sbl_resources & OMAP3_ISP_SBL_CCDC_LSC_READ)) | |
| sbl |= ISPCTRL_SBL_SHARED_RPORTB; | |
| if (!(isp->sbl_resources & OMAP3_ISP_SBL_CSI2C_WRITE)) | |
| sbl |= ISPCTRL_SBL_SHARED_WPORTC; | |
| if (!(isp->sbl_resources & OMAP3_ISP_SBL_RESIZER_WRITE)) | |
| sbl |= ISPCTRL_SBL_WR0_RAM_EN; | |
| if (!(isp->sbl_resources & OMAP3_ISP_SBL_WRITE)) | |
| sbl |= ISPCTRL_SBL_WR1_RAM_EN; | |
| if (!(isp->sbl_resources & OMAP3_ISP_SBL_READ)) | |
| sbl |= ISPCTRL_SBL_RD_RAM_EN; | |
| isp_reg_clr(isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, sbl); | |
| } | |
| /* | |
| * isp_module_sync_idle - Helper to sync module with its idle state | |
| * @me: ISP submodule's media entity | |
| * @wait: ISP submodule's wait queue for streamoff/interrupt synchronization | |
| * @stopping: flag which tells module wants to stop | |
| * | |
| * This function checks if ISP submodule needs to wait for next interrupt. If | |
| * yes, makes the caller to sleep while waiting for such event. | |
| */ | |
| int omap3isp_module_sync_idle(struct media_entity *me, wait_queue_head_t *wait, | |
| atomic_t *stopping) | |
| { | |
| struct isp_pipeline *pipe = to_isp_pipeline(me); | |
| if (pipe->stream_state == ISP_PIPELINE_STREAM_STOPPED || | |
| (pipe->stream_state == ISP_PIPELINE_STREAM_SINGLESHOT && | |
| !isp_pipeline_ready(pipe))) | |
| return 0; | |
| /* | |
| * atomic_set() doesn't include memory barrier on ARM platform for SMP | |
| * scenario. We'll call it here to avoid race conditions. | |
| */ | |
| atomic_set(stopping, 1); | |
| smp_mb(); | |
| /* | |
| * If module is the last one, it's writing to memory. In this case, | |
| * it's necessary to check if the module is already paused due to | |
| * DMA queue underrun or if it has to wait for next interrupt to be | |
| * idle. | |
| * If it isn't the last one, the function won't sleep but *stopping | |
| * will still be set to warn next submodule caller's interrupt the | |
| * module wants to be idle. | |
| */ | |
| if (isp_pipeline_is_last(me)) { | |
| struct isp_video *video = pipe->output; | |
| unsigned long flags; | |
| spin_lock_irqsave(&video->irqlock, flags); | |
| if (video->dmaqueue_flags & ISP_VIDEO_DMAQUEUE_UNDERRUN) { | |
| spin_unlock_irqrestore(&video->irqlock, flags); | |
| atomic_set(stopping, 0); | |
| smp_mb(); | |
| return 0; | |
| } | |
| spin_unlock_irqrestore(&video->irqlock, flags); | |
| if (!wait_event_timeout(*wait, !atomic_read(stopping), | |
| msecs_to_jiffies(1000))) { | |
| atomic_set(stopping, 0); | |
| smp_mb(); | |
| return -ETIMEDOUT; | |
| } | |
| } | |
| return 0; | |
| } | |
| /* | |
| * omap3isp_module_sync_is_stopping - Helper to verify if module was stopping | |
| * @wait: ISP submodule's wait queue for streamoff/interrupt synchronization | |
| * @stopping: flag which tells module wants to stop | |
| * | |
| * This function checks if ISP submodule was stopping. In case of yes, it | |
| * notices the caller by setting stopping to 0 and waking up the wait queue. | |
| * Returns 1 if it was stopping or 0 otherwise. | |
| */ | |
| int omap3isp_module_sync_is_stopping(wait_queue_head_t *wait, | |
| atomic_t *stopping) | |
| { | |
| if (atomic_cmpxchg(stopping, 1, 0)) { | |
| wake_up(wait); | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| /* -------------------------------------------------------------------------- | |
| * Clock management | |
| */ | |
| #define ISPCTRL_CLKS_MASK (ISPCTRL_H3A_CLK_EN | \ | |
| ISPCTRL_HIST_CLK_EN | \ | |
| ISPCTRL_RSZ_CLK_EN | \ | |
| (ISPCTRL_CCDC_CLK_EN | ISPCTRL_CCDC_RAM_EN) | \ | |
| (ISPCTRL_PREV_CLK_EN | ISPCTRL_PREV_RAM_EN)) | |
| static void __isp_subclk_update(struct isp_device *isp) | |
| { | |
| u32 clk = 0; | |
| /* AEWB and AF share the same clock. */ | |
| if (isp->subclk_resources & | |
| (OMAP3_ISP_SUBCLK_AEWB | OMAP3_ISP_SUBCLK_AF)) | |
| clk |= ISPCTRL_H3A_CLK_EN; | |
| if (isp->subclk_resources & OMAP3_ISP_SUBCLK_HIST) | |
| clk |= ISPCTRL_HIST_CLK_EN; | |
| if (isp->subclk_resources & OMAP3_ISP_SUBCLK_RESIZER) | |
| clk |= ISPCTRL_RSZ_CLK_EN; | |
| /* NOTE: For CCDC & Preview submodules, we need to affect internal | |
| * RAM as well. | |
| */ | |
| if (isp->subclk_resources & OMAP3_ISP_SUBCLK_CCDC) | |
| clk |= ISPCTRL_CCDC_CLK_EN | ISPCTRL_CCDC_RAM_EN; | |
| if (isp->subclk_resources & OMAP3_ISP_SUBCLK_PREVIEW) | |
| clk |= ISPCTRL_PREV_CLK_EN | ISPCTRL_PREV_RAM_EN; | |
| isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL, | |
| ISPCTRL_CLKS_MASK, clk); | |
| } | |
| void omap3isp_subclk_enable(struct isp_device *isp, | |
| enum isp_subclk_resource res) | |
| { | |
| isp->subclk_resources |= res; | |
| __isp_subclk_update(isp); | |
| } | |
| void omap3isp_subclk_disable(struct isp_device *isp, | |
| enum isp_subclk_resource res) | |
| { | |
| isp->subclk_resources &= ~res; | |
| __isp_subclk_update(isp); | |
| } | |
| /* | |
| * isp_enable_clocks - Enable ISP clocks | |
| * @isp: OMAP3 ISP device | |
| * | |
| * Return 0 if successful, or clk_prepare_enable return value if any of them | |
| * fails. | |
| */ | |
| static int isp_enable_clocks(struct isp_device *isp) | |
| { | |
| int r; | |
| unsigned long rate; | |
| r = clk_prepare_enable(isp->clock[ISP_CLK_CAM_ICK]); | |
| if (r) { | |
| dev_err(isp->dev, "failed to enable cam_ick clock\n"); | |
| goto out_clk_enable_ick; | |
| } | |
| r = clk_set_rate(isp->clock[ISP_CLK_CAM_MCLK], CM_CAM_MCLK_HZ); | |
| if (r) { | |
| dev_err(isp->dev, "clk_set_rate for cam_mclk failed\n"); | |
| goto out_clk_enable_mclk; | |
| } | |
| r = clk_prepare_enable(isp->clock[ISP_CLK_CAM_MCLK]); | |
| if (r) { | |
| dev_err(isp->dev, "failed to enable cam_mclk clock\n"); | |
| goto out_clk_enable_mclk; | |
| } | |
| rate = clk_get_rate(isp->clock[ISP_CLK_CAM_MCLK]); | |
| if (rate != CM_CAM_MCLK_HZ) | |
| dev_warn(isp->dev, "unexpected cam_mclk rate:\n" | |
| " expected : %d\n" | |
| " actual : %ld\n", CM_CAM_MCLK_HZ, rate); | |
| r = clk_prepare_enable(isp->clock[ISP_CLK_CSI2_FCK]); | |
| if (r) { | |
| dev_err(isp->dev, "failed to enable csi2_fck clock\n"); | |
| goto out_clk_enable_csi2_fclk; | |
| } | |
| return 0; | |
| out_clk_enable_csi2_fclk: | |
| clk_disable_unprepare(isp->clock[ISP_CLK_CAM_MCLK]); | |
| out_clk_enable_mclk: | |
| clk_disable_unprepare(isp->clock[ISP_CLK_CAM_ICK]); | |
| out_clk_enable_ick: | |
| return r; | |
| } | |
| /* | |
| * isp_disable_clocks - Disable ISP clocks | |
| * @isp: OMAP3 ISP device | |
| */ | |
| static void isp_disable_clocks(struct isp_device *isp) | |
| { | |
| clk_disable_unprepare(isp->clock[ISP_CLK_CAM_ICK]); | |
| clk_disable_unprepare(isp->clock[ISP_CLK_CAM_MCLK]); | |
| clk_disable_unprepare(isp->clock[ISP_CLK_CSI2_FCK]); | |
| } | |
| static const char *isp_clocks[] = { | |
| "cam_ick", | |
| "cam_mclk", | |
| "csi2_96m_fck", | |
| "l3_ick", | |
| }; | |
| static int isp_get_clocks(struct isp_device *isp) | |
| { | |
| struct clk *clk; | |
| unsigned int i; | |
| for (i = 0; i < ARRAY_SIZE(isp_clocks); ++i) { | |
| clk = devm_clk_get(isp->dev, isp_clocks[i]); | |
| if (IS_ERR(clk)) { | |
| dev_err(isp->dev, "clk_get %s failed\n", isp_clocks[i]); | |
| return PTR_ERR(clk); | |
| } | |
| isp->clock[i] = clk; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * omap3isp_get - Acquire the ISP resource. | |
| * | |
| * Initializes the clocks for the first acquire. | |
| * | |
| * Increment the reference count on the ISP. If the first reference is taken, | |
| * enable clocks and power-up all submodules. | |
| * | |
| * Return a pointer to the ISP device structure, or NULL if an error occurred. | |
| */ | |
| static struct isp_device *__omap3isp_get(struct isp_device *isp, bool irq) | |
| { | |
| struct isp_device *__isp = isp; | |
| if (isp == NULL) | |
| return NULL; | |
| mutex_lock(&isp->isp_mutex); | |
| if (isp->ref_count > 0) | |
| goto out; | |
| if (isp_enable_clocks(isp) < 0) { | |
| __isp = NULL; | |
| goto out; | |
| } | |
| /* We don't want to restore context before saving it! */ | |
| if (isp->has_context) | |
| isp_restore_ctx(isp); | |
| if (irq) | |
| isp_enable_interrupts(isp); | |
| out: | |
| if (__isp != NULL) | |
| isp->ref_count++; | |
| mutex_unlock(&isp->isp_mutex); | |
| return __isp; | |
| } | |
| struct isp_device *omap3isp_get(struct isp_device *isp) | |
| { | |
| return __omap3isp_get(isp, true); | |
| } | |
| /* | |
| * omap3isp_put - Release the ISP | |
| * | |
| * Decrement the reference count on the ISP. If the last reference is released, | |
| * power-down all submodules, disable clocks and free temporary buffers. | |
| */ | |
| static void __omap3isp_put(struct isp_device *isp, bool save_ctx) | |
| { | |
| if (isp == NULL) | |
| return; | |
| mutex_lock(&isp->isp_mutex); | |
| BUG_ON(isp->ref_count == 0); | |
| if (--isp->ref_count == 0) { | |
| isp_disable_interrupts(isp); | |
| if (save_ctx) { | |
| isp_save_ctx(isp); | |
| isp->has_context = 1; | |
| } | |
| /* Reset the ISP if an entity has failed to stop. This is the | |
| * only way to recover from such conditions. | |
| */ | |
| if (!media_entity_enum_empty(&isp->crashed) || | |
| isp->stop_failure) | |
| isp_reset(isp); | |
| isp_disable_clocks(isp); | |
| } | |
| mutex_unlock(&isp->isp_mutex); | |
| } | |
| void omap3isp_put(struct isp_device *isp) | |
| { | |
| __omap3isp_put(isp, true); | |
| } | |
| /* -------------------------------------------------------------------------- | |
| * Platform device driver | |
| */ | |
| /* | |
| * omap3isp_print_status - Prints the values of the ISP Control Module registers | |
| * @isp: OMAP3 ISP device | |
| */ | |
| #define ISP_PRINT_REGISTER(isp, name)\ | |
| dev_dbg(isp->dev, "###ISP " #name "=0x%08x\n", \ | |
| isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_##name)) | |
| #define SBL_PRINT_REGISTER(isp, name)\ | |
| dev_dbg(isp->dev, "###SBL " #name "=0x%08x\n", \ | |
| isp_reg_readl(isp, OMAP3_ISP_IOMEM_SBL, ISPSBL_##name)) | |
| void omap3isp_print_status(struct isp_device *isp) | |
| { | |
| dev_dbg(isp->dev, "-------------ISP Register dump--------------\n"); | |
| ISP_PRINT_REGISTER(isp, SYSCONFIG); | |
| ISP_PRINT_REGISTER(isp, SYSSTATUS); | |
| ISP_PRINT_REGISTER(isp, IRQ0ENABLE); | |
| ISP_PRINT_REGISTER(isp, IRQ0STATUS); | |
| ISP_PRINT_REGISTER(isp, TCTRL_GRESET_LENGTH); | |
| ISP_PRINT_REGISTER(isp, TCTRL_PSTRB_REPLAY); | |
| ISP_PRINT_REGISTER(isp, CTRL); | |
| ISP_PRINT_REGISTER(isp, TCTRL_CTRL); | |
| ISP_PRINT_REGISTER(isp, TCTRL_FRAME); | |
| ISP_PRINT_REGISTER(isp, TCTRL_PSTRB_DELAY); | |
| ISP_PRINT_REGISTER(isp, TCTRL_STRB_DELAY); | |
| ISP_PRINT_REGISTER(isp, TCTRL_SHUT_DELAY); | |
| ISP_PRINT_REGISTER(isp, TCTRL_PSTRB_LENGTH); | |
| ISP_PRINT_REGISTER(isp, TCTRL_STRB_LENGTH); | |
| ISP_PRINT_REGISTER(isp, TCTRL_SHUT_LENGTH); | |
| SBL_PRINT_REGISTER(isp, PCR); | |
| SBL_PRINT_REGISTER(isp, SDR_REQ_EXP); | |
| dev_dbg(isp->dev, "--------------------------------------------\n"); | |
| } | |
| #ifdef CONFIG_PM | |
| /* | |
| * Power management support. | |
| * | |
| * As the ISP can't properly handle an input video stream interruption on a non | |
| * frame boundary, the ISP pipelines need to be stopped before sensors get | |
| * suspended. However, as suspending the sensors can require a running clock, | |
| * which can be provided by the ISP, the ISP can't be completely suspended | |
| * before the sensor. | |
| * | |
| * To solve this problem power management support is split into prepare/complete | |
| * and suspend/resume operations. The pipelines are stopped in prepare() and the | |
| * ISP clocks get disabled in suspend(). Similarly, the clocks are reenabled in | |
| * resume(), and the the pipelines are restarted in complete(). | |
| * | |
| * TODO: PM dependencies between the ISP and sensors are not modelled explicitly | |
| * yet. | |
| */ | |
| static int isp_pm_prepare(struct device *dev) | |
| { | |
| struct isp_device *isp = dev_get_drvdata(dev); | |
| int reset; | |
| WARN_ON(mutex_is_locked(&isp->isp_mutex)); | |
| if (isp->ref_count == 0) | |
| return 0; | |
| reset = isp_suspend_modules(isp); | |
| isp_disable_interrupts(isp); | |
| isp_save_ctx(isp); | |
| if (reset) | |
| isp_reset(isp); | |
| return 0; | |
| } | |
| static int isp_pm_suspend(struct device *dev) | |
| { | |
| struct isp_device *isp = dev_get_drvdata(dev); | |
| WARN_ON(mutex_is_locked(&isp->isp_mutex)); | |
| if (isp->ref_count) | |
| isp_disable_clocks(isp); | |
| return 0; | |
| } | |
| static int isp_pm_resume(struct device *dev) | |
| { | |
| struct isp_device *isp = dev_get_drvdata(dev); | |
| if (isp->ref_count == 0) | |
| return 0; | |
| return isp_enable_clocks(isp); | |
| } | |
| static void isp_pm_complete(struct device *dev) | |
| { | |
| struct isp_device *isp = dev_get_drvdata(dev); | |
| if (isp->ref_count == 0) | |
| return; | |
| isp_restore_ctx(isp); | |
| isp_enable_interrupts(isp); | |
| isp_resume_modules(isp); | |
| } | |
| #else | |
| #define isp_pm_prepare NULL | |
| #define isp_pm_suspend NULL | |
| #define isp_pm_resume NULL | |
| #define isp_pm_complete NULL | |
| #endif /* CONFIG_PM */ | |
| static void isp_unregister_entities(struct isp_device *isp) | |
| { | |
| media_device_unregister(&isp->media_dev); | |
| omap3isp_csi2_unregister_entities(&isp->isp_csi2a); | |
| omap3isp_ccp2_unregister_entities(&isp->isp_ccp2); | |
| omap3isp_ccdc_unregister_entities(&isp->isp_ccdc); | |
| omap3isp_preview_unregister_entities(&isp->isp_prev); | |
| omap3isp_resizer_unregister_entities(&isp->isp_res); | |
| omap3isp_stat_unregister_entities(&isp->isp_aewb); | |
| omap3isp_stat_unregister_entities(&isp->isp_af); | |
| omap3isp_stat_unregister_entities(&isp->isp_hist); | |
| v4l2_device_unregister(&isp->v4l2_dev); | |
| media_device_cleanup(&isp->media_dev); | |
| } | |
| static int isp_link_entity( | |
| struct isp_device *isp, struct media_entity *entity, | |
| enum isp_interface_type interface) | |
| { | |
| struct media_entity *input; | |
| unsigned int flags; | |
| unsigned int pad; | |
| unsigned int i; | |
| /* Connect the sensor to the correct interface module. | |
| * Parallel sensors are connected directly to the CCDC, while | |
| * serial sensors are connected to the CSI2a, CCP2b or CSI2c | |
| * receiver through CSIPHY1 or CSIPHY2. | |
| */ | |
| switch (interface) { | |
| case ISP_INTERFACE_PARALLEL: | |
| input = &isp->isp_ccdc.subdev.entity; | |
| pad = CCDC_PAD_SINK; | |
| flags = 0; | |
| break; | |
| case ISP_INTERFACE_CSI2A_PHY2: | |
| input = &isp->isp_csi2a.subdev.entity; | |
| pad = CSI2_PAD_SINK; | |
| flags = MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED; | |
| break; | |
| case ISP_INTERFACE_CCP2B_PHY1: | |
| case ISP_INTERFACE_CCP2B_PHY2: | |
| input = &isp->isp_ccp2.subdev.entity; | |
| pad = CCP2_PAD_SINK; | |
| flags = 0; | |
| break; | |
| case ISP_INTERFACE_CSI2C_PHY1: | |
| input = &isp->isp_csi2c.subdev.entity; | |
| pad = CSI2_PAD_SINK; | |
| flags = MEDIA_LNK_FL_IMMUTABLE | MEDIA_LNK_FL_ENABLED; | |
| break; | |
| default: | |
| dev_err(isp->dev, "%s: invalid interface type %u\n", __func__, | |
| interface); | |
| return -EINVAL; | |
| } | |
| /* | |
| * Not all interfaces are available on all revisions of the | |
| * ISP. The sub-devices of those interfaces aren't initialised | |
| * in such a case. Check this by ensuring the num_pads is | |
| * non-zero. | |
| */ | |
| if (!input->num_pads) { | |
| dev_err(isp->dev, "%s: invalid input %u\n", entity->name, | |
| interface); | |
| return -EINVAL; | |
| } | |
| for (i = 0; i < entity->num_pads; i++) { | |
| if (entity->pads[i].flags & MEDIA_PAD_FL_SOURCE) | |
| break; | |
| } | |
| if (i == entity->num_pads) { | |
| dev_err(isp->dev, "%s: no source pad in external entity\n", | |
| __func__); | |
| return -EINVAL; | |
| } | |
| return media_create_pad_link(entity, i, input, pad, flags); | |
| } | |
| static int isp_register_entities(struct isp_device *isp) | |
| { | |
| int ret; | |
| isp->media_dev.dev = isp->dev; | |
| strlcpy(isp->media_dev.model, "TI OMAP3 ISP", | |
| sizeof(isp->media_dev.model)); | |
| isp->media_dev.hw_revision = isp->revision; | |
| isp->media_dev.ops = &isp_media_ops; | |
| media_device_init(&isp->media_dev); | |
| isp->v4l2_dev.mdev = &isp->media_dev; | |
| ret = v4l2_device_register(isp->dev, &isp->v4l2_dev); | |
| if (ret < 0) { | |
| dev_err(isp->dev, "%s: V4L2 device registration failed (%d)\n", | |
| __func__, ret); | |
| goto done; | |
| } | |
| /* Register internal entities */ | |
| ret = omap3isp_ccp2_register_entities(&isp->isp_ccp2, &isp->v4l2_dev); | |
| if (ret < 0) | |
| goto done; | |
| ret = omap3isp_csi2_register_entities(&isp->isp_csi2a, &isp->v4l2_dev); | |
| if (ret < 0) | |
| goto done; | |
| ret = omap3isp_ccdc_register_entities(&isp->isp_ccdc, &isp->v4l2_dev); | |
| if (ret < 0) | |
| goto done; | |
| ret = omap3isp_preview_register_entities(&isp->isp_prev, | |
| &isp->v4l2_dev); | |
| if (ret < 0) | |
| goto done; | |
| ret = omap3isp_resizer_register_entities(&isp->isp_res, &isp->v4l2_dev); | |
| if (ret < 0) | |
| goto done; | |
| ret = omap3isp_stat_register_entities(&isp->isp_aewb, &isp->v4l2_dev); | |
| if (ret < 0) | |
| goto done; | |
| ret = omap3isp_stat_register_entities(&isp->isp_af, &isp->v4l2_dev); | |
| if (ret < 0) | |
| goto done; | |
| ret = omap3isp_stat_register_entities(&isp->isp_hist, &isp->v4l2_dev); | |
| if (ret < 0) | |
| goto done; | |
| done: | |
| if (ret < 0) | |
| isp_unregister_entities(isp); | |
| return ret; | |
| } | |
| /* | |
| * isp_create_links() - Create links for internal and external ISP entities | |
| * @isp : Pointer to ISP device | |
| * | |
| * This function creates all links between ISP internal and external entities. | |
| * | |
| * Return: A negative error code on failure or zero on success. Possible error | |
| * codes are those returned by media_create_pad_link(). | |
| */ | |
| static int isp_create_links(struct isp_device *isp) | |
| { | |
| int ret; | |
| /* Create links between entities and video nodes. */ | |
| ret = media_create_pad_link( | |
| &isp->isp_csi2a.subdev.entity, CSI2_PAD_SOURCE, | |
| &isp->isp_csi2a.video_out.video.entity, 0, 0); | |
| if (ret < 0) | |
| return ret; | |
| ret = media_create_pad_link( | |
| &isp->isp_ccp2.video_in.video.entity, 0, | |
| &isp->isp_ccp2.subdev.entity, CCP2_PAD_SINK, 0); | |
| if (ret < 0) | |
| return ret; | |
| ret = media_create_pad_link( | |
| &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_OF, | |
| &isp->isp_ccdc.video_out.video.entity, 0, 0); | |
| if (ret < 0) | |
| return ret; | |
| ret = media_create_pad_link( | |
| &isp->isp_prev.video_in.video.entity, 0, | |
| &isp->isp_prev.subdev.entity, PREV_PAD_SINK, 0); | |
| if (ret < 0) | |
| return ret; | |
| ret = media_create_pad_link( | |
| &isp->isp_prev.subdev.entity, PREV_PAD_SOURCE, | |
| &isp->isp_prev.video_out.video.entity, 0, 0); | |
| if (ret < 0) | |
| return ret; | |
| ret = media_create_pad_link( | |
| &isp->isp_res.video_in.video.entity, 0, | |
| &isp->isp_res.subdev.entity, RESZ_PAD_SINK, 0); | |
| if (ret < 0) | |
| return ret; | |
| ret = media_create_pad_link( | |
| &isp->isp_res.subdev.entity, RESZ_PAD_SOURCE, | |
| &isp->isp_res.video_out.video.entity, 0, 0); | |
| if (ret < 0) | |
| return ret; | |
| /* Create links between entities. */ | |
| ret = media_create_pad_link( | |
| &isp->isp_csi2a.subdev.entity, CSI2_PAD_SOURCE, | |
| &isp->isp_ccdc.subdev.entity, CCDC_PAD_SINK, 0); | |
| if (ret < 0) | |
| return ret; | |
| ret = media_create_pad_link( | |
| &isp->isp_ccp2.subdev.entity, CCP2_PAD_SOURCE, | |
| &isp->isp_ccdc.subdev.entity, CCDC_PAD_SINK, 0); | |
| if (ret < 0) | |
| return ret; | |
| ret = media_create_pad_link( | |
| &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_VP, | |
| &isp->isp_prev.subdev.entity, PREV_PAD_SINK, 0); | |
| if (ret < 0) | |
| return ret; | |
| ret = media_create_pad_link( | |
| &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_OF, | |
| &isp->isp_res.subdev.entity, RESZ_PAD_SINK, 0); | |
| if (ret < 0) | |
| return ret; | |
| ret = media_create_pad_link( | |
| &isp->isp_prev.subdev.entity, PREV_PAD_SOURCE, | |
| &isp->isp_res.subdev.entity, RESZ_PAD_SINK, 0); | |
| if (ret < 0) | |
| return ret; | |
| ret = media_create_pad_link( | |
| &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_VP, | |
| &isp->isp_aewb.subdev.entity, 0, | |
| MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); | |
| if (ret < 0) | |
| return ret; | |
| ret = media_create_pad_link( | |
| &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_VP, | |
| &isp->isp_af.subdev.entity, 0, | |
| MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); | |
| if (ret < 0) | |
| return ret; | |
| ret = media_create_pad_link( | |
| &isp->isp_ccdc.subdev.entity, CCDC_PAD_SOURCE_VP, | |
| &isp->isp_hist.subdev.entity, 0, | |
| MEDIA_LNK_FL_ENABLED | MEDIA_LNK_FL_IMMUTABLE); | |
| if (ret < 0) | |
| return ret; | |
| return 0; | |
| } | |
| static void isp_cleanup_modules(struct isp_device *isp) | |
| { | |
| omap3isp_h3a_aewb_cleanup(isp); | |
| omap3isp_h3a_af_cleanup(isp); | |
| omap3isp_hist_cleanup(isp); | |
| omap3isp_resizer_cleanup(isp); | |
| omap3isp_preview_cleanup(isp); | |
| omap3isp_ccdc_cleanup(isp); | |
| omap3isp_ccp2_cleanup(isp); | |
| omap3isp_csi2_cleanup(isp); | |
| omap3isp_csiphy_cleanup(isp); | |
| } | |
| static int isp_initialize_modules(struct isp_device *isp) | |
| { | |
| int ret; | |
| ret = omap3isp_csiphy_init(isp); | |
| if (ret < 0) { | |
| dev_err(isp->dev, "CSI PHY initialization failed\n"); | |
| return ret; | |
| } | |
| ret = omap3isp_csi2_init(isp); | |
| if (ret < 0) { | |
| dev_err(isp->dev, "CSI2 initialization failed\n"); | |
| goto error_csi2; | |
| } | |
| ret = omap3isp_ccp2_init(isp); | |
| if (ret < 0) { | |
| if (ret != -EPROBE_DEFER) | |
| dev_err(isp->dev, "CCP2 initialization failed\n"); | |
| goto error_ccp2; | |
| } | |
| ret = omap3isp_ccdc_init(isp); | |
| if (ret < 0) { | |
| dev_err(isp->dev, "CCDC initialization failed\n"); | |
| goto error_ccdc; | |
| } | |
| ret = omap3isp_preview_init(isp); | |
| if (ret < 0) { | |
| dev_err(isp->dev, "Preview initialization failed\n"); | |
| goto error_preview; | |
| } | |
| ret = omap3isp_resizer_init(isp); | |
| if (ret < 0) { | |
| dev_err(isp->dev, "Resizer initialization failed\n"); | |
| goto error_resizer; | |
| } | |
| ret = omap3isp_hist_init(isp); | |
| if (ret < 0) { | |
| dev_err(isp->dev, "Histogram initialization failed\n"); | |
| goto error_hist; | |
| } | |
| ret = omap3isp_h3a_aewb_init(isp); | |
| if (ret < 0) { | |
| dev_err(isp->dev, "H3A AEWB initialization failed\n"); | |
| goto error_h3a_aewb; | |
| } | |
| ret = omap3isp_h3a_af_init(isp); | |
| if (ret < 0) { | |
| dev_err(isp->dev, "H3A AF initialization failed\n"); | |
| goto error_h3a_af; | |
| } | |
| return 0; | |
| error_h3a_af: | |
| omap3isp_h3a_aewb_cleanup(isp); | |
| error_h3a_aewb: | |
| omap3isp_hist_cleanup(isp); | |
| error_hist: | |
| omap3isp_resizer_cleanup(isp); | |
| error_resizer: | |
| omap3isp_preview_cleanup(isp); | |
| error_preview: | |
| omap3isp_ccdc_cleanup(isp); | |
| error_ccdc: | |
| omap3isp_ccp2_cleanup(isp); | |
| error_ccp2: | |
| omap3isp_csi2_cleanup(isp); | |
| error_csi2: | |
| omap3isp_csiphy_cleanup(isp); | |
| return ret; | |
| } | |
| static void isp_detach_iommu(struct isp_device *isp) | |
| { | |
| arm_iommu_detach_device(isp->dev); | |
| arm_iommu_release_mapping(isp->mapping); | |
| isp->mapping = NULL; | |
| } | |
| static int isp_attach_iommu(struct isp_device *isp) | |
| { | |
| struct dma_iommu_mapping *mapping; | |
| int ret; | |
| /* | |
| * Create the ARM mapping, used by the ARM DMA mapping core to allocate | |
| * VAs. This will allocate a corresponding IOMMU domain. | |
| */ | |
| mapping = arm_iommu_create_mapping(&platform_bus_type, SZ_1G, SZ_2G); | |
| if (IS_ERR(mapping)) { | |
| dev_err(isp->dev, "failed to create ARM IOMMU mapping\n"); | |
| return PTR_ERR(mapping); | |
| } | |
| isp->mapping = mapping; | |
| /* Attach the ARM VA mapping to the device. */ | |
| ret = arm_iommu_attach_device(isp->dev, mapping); | |
| if (ret < 0) { | |
| dev_err(isp->dev, "failed to attach device to VA mapping\n"); | |
| goto error; | |
| } | |
| return 0; | |
| error: | |
| arm_iommu_release_mapping(isp->mapping); | |
| isp->mapping = NULL; | |
| return ret; | |
| } | |
| /* | |
| * isp_remove - Remove ISP platform device | |
| * @pdev: Pointer to ISP platform device | |
| * | |
| * Always returns 0. | |
| */ | |
| static int isp_remove(struct platform_device *pdev) | |
| { | |
| struct isp_device *isp = platform_get_drvdata(pdev); | |
| v4l2_async_notifier_unregister(&isp->notifier); | |
| isp_unregister_entities(isp); | |
| isp_cleanup_modules(isp); | |
| isp_xclk_cleanup(isp); | |
| __omap3isp_get(isp, false); | |
| isp_detach_iommu(isp); | |
| __omap3isp_put(isp, false); | |
| media_entity_enum_cleanup(&isp->crashed); | |
| return 0; | |
| } | |
| enum isp_of_phy { | |
| ISP_OF_PHY_PARALLEL = 0, | |
| ISP_OF_PHY_CSIPHY1, | |
| ISP_OF_PHY_CSIPHY2, | |
| }; | |
| static int isp_fwnode_parse(struct device *dev, struct fwnode_handle *fwnode, | |
| struct isp_async_subdev *isd) | |
| { | |
| struct isp_bus_cfg *buscfg = &isd->bus; | |
| struct v4l2_fwnode_endpoint vep; | |
| unsigned int i; | |
| int ret; | |
| bool csi1 = false; | |
| ret = v4l2_fwnode_endpoint_parse(fwnode, &vep); | |
| if (ret) | |
| return ret; | |
| dev_dbg(dev, "parsing endpoint %pOF, interface %u\n", | |
| to_of_node(fwnode), vep.base.port); | |
| switch (vep.base.port) { | |
| case ISP_OF_PHY_PARALLEL: | |
| buscfg->interface = ISP_INTERFACE_PARALLEL; | |
| buscfg->bus.parallel.data_lane_shift = | |
| vep.bus.parallel.data_shift; | |
| buscfg->bus.parallel.clk_pol = | |
| !!(vep.bus.parallel.flags | |
| & V4L2_MBUS_PCLK_SAMPLE_FALLING); | |
| buscfg->bus.parallel.hs_pol = | |
| !!(vep.bus.parallel.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW); | |
| buscfg->bus.parallel.vs_pol = | |
| !!(vep.bus.parallel.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW); | |
| buscfg->bus.parallel.fld_pol = | |
| !!(vep.bus.parallel.flags & V4L2_MBUS_FIELD_EVEN_LOW); | |
| buscfg->bus.parallel.data_pol = | |
| !!(vep.bus.parallel.flags & V4L2_MBUS_DATA_ACTIVE_LOW); | |
| buscfg->bus.parallel.bt656 = vep.bus_type == V4L2_MBUS_BT656; | |
| break; | |
| case ISP_OF_PHY_CSIPHY1: | |
| case ISP_OF_PHY_CSIPHY2: | |
| switch (vep.bus_type) { | |
| case V4L2_MBUS_CCP2: | |
| case V4L2_MBUS_CSI1: | |
| dev_dbg(dev, "CSI-1/CCP-2 configuration\n"); | |
| csi1 = true; | |
| break; | |
| case V4L2_MBUS_CSI2: | |
| dev_dbg(dev, "CSI-2 configuration\n"); | |
| csi1 = false; | |
| break; | |
| default: | |
| dev_err(dev, "unsupported bus type %u\n", | |
| vep.bus_type); | |
| return -EINVAL; | |
| } | |
| switch (vep.base.port) { | |
| case ISP_OF_PHY_CSIPHY1: | |
| if (csi1) | |
| buscfg->interface = ISP_INTERFACE_CCP2B_PHY1; | |
| else | |
| buscfg->interface = ISP_INTERFACE_CSI2C_PHY1; | |
| break; | |
| case ISP_OF_PHY_CSIPHY2: | |
| if (csi1) | |
| buscfg->interface = ISP_INTERFACE_CCP2B_PHY2; | |
| else | |
| buscfg->interface = ISP_INTERFACE_CSI2A_PHY2; | |
| break; | |
| } | |
| if (csi1) { | |
| buscfg->bus.ccp2.lanecfg.clk.pos = | |
| vep.bus.mipi_csi1.clock_lane; | |
| buscfg->bus.ccp2.lanecfg.clk.pol = | |
| vep.bus.mipi_csi1.lane_polarity[0]; | |
| dev_dbg(dev, "clock lane polarity %u, pos %u\n", | |
| buscfg->bus.ccp2.lanecfg.clk.pol, | |
| buscfg->bus.ccp2.lanecfg.clk.pos); | |
| buscfg->bus.ccp2.lanecfg.data[0].pos = | |
| vep.bus.mipi_csi1.data_lane; | |
| buscfg->bus.ccp2.lanecfg.data[0].pol = | |
| vep.bus.mipi_csi1.lane_polarity[1]; | |
| dev_dbg(dev, "data lane polarity %u, pos %u\n", | |
| buscfg->bus.ccp2.lanecfg.data[0].pol, | |
| buscfg->bus.ccp2.lanecfg.data[0].pos); | |
| buscfg->bus.ccp2.strobe_clk_pol = | |
| vep.bus.mipi_csi1.clock_inv; | |
| buscfg->bus.ccp2.phy_layer = vep.bus.mipi_csi1.strobe; | |
| buscfg->bus.ccp2.ccp2_mode = | |
| vep.bus_type == V4L2_MBUS_CCP2; | |
| buscfg->bus.ccp2.vp_clk_pol = 1; | |
| buscfg->bus.ccp2.crc = 1; | |
| } else { | |
| buscfg->bus.csi2.lanecfg.clk.pos = | |
| vep.bus.mipi_csi2.clock_lane; | |
| buscfg->bus.csi2.lanecfg.clk.pol = | |
| vep.bus.mipi_csi2.lane_polarities[0]; | |
| dev_dbg(dev, "clock lane polarity %u, pos %u\n", | |
| buscfg->bus.csi2.lanecfg.clk.pol, | |
| buscfg->bus.csi2.lanecfg.clk.pos); | |
| buscfg->bus.csi2.num_data_lanes = | |
| vep.bus.mipi_csi2.num_data_lanes; | |
| for (i = 0; i < buscfg->bus.csi2.num_data_lanes; i++) { | |
| buscfg->bus.csi2.lanecfg.data[i].pos = | |
| vep.bus.mipi_csi2.data_lanes[i]; | |
| buscfg->bus.csi2.lanecfg.data[i].pol = | |
| vep.bus.mipi_csi2.lane_polarities[i + 1]; | |
| dev_dbg(dev, | |
| "data lane %u polarity %u, pos %u\n", i, | |
| buscfg->bus.csi2.lanecfg.data[i].pol, | |
| buscfg->bus.csi2.lanecfg.data[i].pos); | |
| } | |
| /* | |
| * FIXME: now we assume the CRC is always there. | |
| * Implement a way to obtain this information from the | |
| * sensor. Frame descriptors, perhaps? | |
| */ | |
| buscfg->bus.csi2.crc = 1; | |
| } | |
| break; | |
| default: | |
| dev_warn(dev, "%pOF: invalid interface %u\n", | |
| to_of_node(fwnode), vep.base.port); | |
| return -EINVAL; | |
| } | |
| return 0; | |
| } | |
| static int isp_fwnodes_parse(struct device *dev, | |
| struct v4l2_async_notifier *notifier) | |
| { | |
| struct fwnode_handle *fwnode = NULL; | |
| notifier->subdevs = devm_kcalloc( | |
| dev, ISP_MAX_SUBDEVS, sizeof(*notifier->subdevs), GFP_KERNEL); | |
| if (!notifier->subdevs) | |
| return -ENOMEM; | |
| while (notifier->num_subdevs < ISP_MAX_SUBDEVS && | |
| (fwnode = fwnode_graph_get_next_endpoint( | |
| of_fwnode_handle(dev->of_node), fwnode))) { | |
| struct isp_async_subdev *isd; | |
| isd = devm_kzalloc(dev, sizeof(*isd), GFP_KERNEL); | |
| if (!isd) | |
| goto error; | |
| if (isp_fwnode_parse(dev, fwnode, isd)) { | |
| devm_kfree(dev, isd); | |
| continue; | |
| } | |
| notifier->subdevs[notifier->num_subdevs] = &isd->asd; | |
| isd->asd.match.fwnode.fwnode = | |
| fwnode_graph_get_remote_port_parent(fwnode); | |
| if (!isd->asd.match.fwnode.fwnode) { | |
| dev_warn(dev, "bad remote port parent\n"); | |
| goto error; | |
| } | |
| isd->asd.match_type = V4L2_ASYNC_MATCH_FWNODE; | |
| notifier->num_subdevs++; | |
| } | |
| return notifier->num_subdevs; | |
| error: | |
| fwnode_handle_put(fwnode); | |
| return -EINVAL; | |
| } | |
| static int isp_subdev_notifier_complete(struct v4l2_async_notifier *async) | |
| { | |
| struct isp_device *isp = container_of(async, struct isp_device, | |
| notifier); | |
| struct v4l2_device *v4l2_dev = &isp->v4l2_dev; | |
| struct v4l2_subdev *sd; | |
| int ret; | |
| ret = media_entity_enum_init(&isp->crashed, &isp->media_dev); | |
| if (ret) | |
| return ret; | |
| list_for_each_entry(sd, &v4l2_dev->subdevs, list) { | |
| if (!sd->asd) | |
| continue; | |
| ret = isp_link_entity(isp, &sd->entity, | |
| v4l2_subdev_to_bus_cfg(sd)->interface); | |
| if (ret < 0) | |
| return ret; | |
| } | |
| ret = v4l2_device_register_subdev_nodes(&isp->v4l2_dev); | |
| if (ret < 0) | |
| return ret; | |
| return media_device_register(&isp->media_dev); | |
| } | |
| /* | |
| * isp_probe - Probe ISP platform device | |
| * @pdev: Pointer to ISP platform device | |
| * | |
| * Returns 0 if successful, | |
| * -ENOMEM if no memory available, | |
| * -ENODEV if no platform device resources found | |
| * or no space for remapping registers, | |
| * -EINVAL if couldn't install ISR, | |
| * or clk_get return error value. | |
| */ | |
| static int isp_probe(struct platform_device *pdev) | |
| { | |
| struct isp_device *isp; | |
| struct resource *mem; | |
| int ret; | |
| int i, m; | |
| isp = devm_kzalloc(&pdev->dev, sizeof(*isp), GFP_KERNEL); | |
| if (!isp) { | |
| dev_err(&pdev->dev, "could not allocate memory\n"); | |
| return -ENOMEM; | |
| } | |
| ret = fwnode_property_read_u32(of_fwnode_handle(pdev->dev.of_node), | |
| "ti,phy-type", &isp->phy_type); | |
| if (ret) | |
| return ret; | |
| isp->syscon = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, | |
| "syscon"); | |
| if (IS_ERR(isp->syscon)) | |
| return PTR_ERR(isp->syscon); | |
| ret = of_property_read_u32_index(pdev->dev.of_node, | |
| "syscon", 1, &isp->syscon_offset); | |
| if (ret) | |
| return ret; | |
| ret = isp_fwnodes_parse(&pdev->dev, &isp->notifier); | |
| if (ret < 0) | |
| return ret; | |
| isp->autoidle = autoidle; | |
| mutex_init(&isp->isp_mutex); | |
| spin_lock_init(&isp->stat_lock); | |
| isp->dev = &pdev->dev; | |
| isp->ref_count = 0; | |
| ret = dma_coerce_mask_and_coherent(isp->dev, DMA_BIT_MASK(32)); | |
| if (ret) | |
| goto error; | |
| platform_set_drvdata(pdev, isp); | |
| /* Regulators */ | |
| isp->isp_csiphy1.vdd = devm_regulator_get(&pdev->dev, "vdd-csiphy1"); | |
| isp->isp_csiphy2.vdd = devm_regulator_get(&pdev->dev, "vdd-csiphy2"); | |
| /* Clocks | |
| * | |
| * The ISP clock tree is revision-dependent. We thus need to enable ICLK | |
| * manually to read the revision before calling __omap3isp_get(). | |
| * | |
| * Start by mapping the ISP MMIO area, which is in two pieces. | |
| * The ISP IOMMU is in between. Map both now, and fill in the | |
| * ISP revision specific portions a little later in the | |
| * function. | |
| */ | |
| for (i = 0; i < 2; i++) { | |
| unsigned int map_idx = i ? OMAP3_ISP_IOMEM_CSI2A_REGS1 : 0; | |
| mem = platform_get_resource(pdev, IORESOURCE_MEM, i); | |
| isp->mmio_base[map_idx] = | |
| devm_ioremap_resource(isp->dev, mem); | |
| if (IS_ERR(isp->mmio_base[map_idx])) | |
| return PTR_ERR(isp->mmio_base[map_idx]); | |
| } | |
| ret = isp_get_clocks(isp); | |
| if (ret < 0) | |
| goto error; | |
| ret = clk_enable(isp->clock[ISP_CLK_CAM_ICK]); | |
| if (ret < 0) | |
| goto error; | |
| isp->revision = isp_reg_readl(isp, OMAP3_ISP_IOMEM_MAIN, ISP_REVISION); | |
| dev_info(isp->dev, "Revision %d.%d found\n", | |
| (isp->revision & 0xf0) >> 4, isp->revision & 0x0f); | |
| clk_disable(isp->clock[ISP_CLK_CAM_ICK]); | |
| if (__omap3isp_get(isp, false) == NULL) { | |
| ret = -ENODEV; | |
| goto error; | |
| } | |
| ret = isp_reset(isp); | |
| if (ret < 0) | |
| goto error_isp; | |
| ret = isp_xclk_init(isp); | |
| if (ret < 0) | |
| goto error_isp; | |
| /* Memory resources */ | |
| for (m = 0; m < ARRAY_SIZE(isp_res_maps); m++) | |
| if (isp->revision == isp_res_maps[m].isp_rev) | |
| break; | |
| if (m == ARRAY_SIZE(isp_res_maps)) { | |
| dev_err(isp->dev, "No resource map found for ISP rev %d.%d\n", | |
| (isp->revision & 0xf0) >> 4, isp->revision & 0xf); | |
| ret = -ENODEV; | |
| goto error_isp; | |
| } | |
| for (i = 1; i < OMAP3_ISP_IOMEM_CSI2A_REGS1; i++) | |
| isp->mmio_base[i] = | |
| isp->mmio_base[0] + isp_res_maps[m].offset[i]; | |
| for (i = OMAP3_ISP_IOMEM_CSIPHY2; i < OMAP3_ISP_IOMEM_LAST; i++) | |
| isp->mmio_base[i] = | |
| isp->mmio_base[OMAP3_ISP_IOMEM_CSI2A_REGS1] | |
| + isp_res_maps[m].offset[i]; | |
| isp->mmio_hist_base_phys = | |
| mem->start + isp_res_maps[m].offset[OMAP3_ISP_IOMEM_HIST]; | |
| /* IOMMU */ | |
| ret = isp_attach_iommu(isp); | |
| if (ret < 0) { | |
| dev_err(&pdev->dev, "unable to attach to IOMMU\n"); | |
| goto error_isp; | |
| } | |
| /* Interrupt */ | |
| ret = platform_get_irq(pdev, 0); | |
| if (ret <= 0) { | |
| dev_err(isp->dev, "No IRQ resource\n"); | |
| ret = -ENODEV; | |
| goto error_iommu; | |
| } | |
| isp->irq_num = ret; | |
| if (devm_request_irq(isp->dev, isp->irq_num, isp_isr, IRQF_SHARED, | |
| "OMAP3 ISP", isp)) { | |
| dev_err(isp->dev, "Unable to request IRQ\n"); | |
| ret = -EINVAL; | |
| goto error_iommu; | |
| } | |
| /* Entities */ | |
| ret = isp_initialize_modules(isp); | |
| if (ret < 0) | |
| goto error_iommu; | |
| ret = isp_register_entities(isp); | |
| if (ret < 0) | |
| goto error_modules; | |
| ret = isp_create_links(isp); | |
| if (ret < 0) | |
| goto error_register_entities; | |
| isp->notifier.complete = isp_subdev_notifier_complete; | |
| ret = v4l2_async_notifier_register(&isp->v4l2_dev, &isp->notifier); | |
| if (ret) | |
| goto error_register_entities; | |
| isp_core_init(isp, 1); | |
| omap3isp_put(isp); | |
| return 0; | |
| error_register_entities: | |
| isp_unregister_entities(isp); | |
| error_modules: | |
| isp_cleanup_modules(isp); | |
| error_iommu: | |
| isp_detach_iommu(isp); | |
| error_isp: | |
| isp_xclk_cleanup(isp); | |
| __omap3isp_put(isp, false); | |
| error: | |
| mutex_destroy(&isp->isp_mutex); | |
| return ret; | |
| } | |
| static const struct dev_pm_ops omap3isp_pm_ops = { | |
| .prepare = isp_pm_prepare, | |
| .suspend = isp_pm_suspend, | |
| .resume = isp_pm_resume, | |
| .complete = isp_pm_complete, | |
| }; | |
| static struct platform_device_id omap3isp_id_table[] = { | |
| { "omap3isp", 0 }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(platform, omap3isp_id_table); | |
| static const struct of_device_id omap3isp_of_table[] = { | |
| { .compatible = "ti,omap3-isp" }, | |
| { }, | |
| }; | |
| MODULE_DEVICE_TABLE(of, omap3isp_of_table); | |
| static struct platform_driver omap3isp_driver = { | |
| .probe = isp_probe, | |
| .remove = isp_remove, | |
| .id_table = omap3isp_id_table, | |
| .driver = { | |
| .name = "omap3isp", | |
| .pm = &omap3isp_pm_ops, | |
| .of_match_table = omap3isp_of_table, | |
| }, | |
| }; | |
| module_platform_driver(omap3isp_driver); | |
| MODULE_AUTHOR("Nokia Corporation"); | |
| MODULE_DESCRIPTION("TI OMAP3 ISP driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_VERSION(ISP_VIDEO_DRIVER_VERSION); |