| /* | |
| * Copyright 2006 Dave Airlie <airlied@linux.ie> | |
| * Copyright © 2006-2007 Intel Corporation | |
| * Jesse Barnes <jesse.barnes@intel.com> | |
| * | |
| * Permission is hereby granted, free of charge, to any person obtaining a | |
| * copy of this software and associated documentation files (the "Software"), | |
| * to deal in the Software without restriction, including without limitation | |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, | |
| * and/or sell copies of the Software, and to permit persons to whom the | |
| * Software is furnished to do so, subject to the following conditions: | |
| * | |
| * The above copyright notice and this permission notice (including the next | |
| * paragraph) shall be included in all copies or substantial portions of the | |
| * Software. | |
| * | |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR | |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, | |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL | |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER | |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING | |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER | |
| * DEALINGS IN THE SOFTWARE. | |
| * | |
| * Authors: | |
| * Eric Anholt <eric@anholt.net> | |
| */ | |
| #include <linux/i2c.h> | |
| #include <linux/slab.h> | |
| #include <linux/delay.h> | |
| #include <linux/export.h> | |
| #include <drm/drmP.h> | |
| #include <drm/drm_atomic_helper.h> | |
| #include <drm/drm_crtc.h> | |
| #include <drm/drm_edid.h> | |
| #include "intel_drv.h" | |
| #include <drm/i915_drm.h> | |
| #include "i915_drv.h" | |
| #include "intel_sdvo_regs.h" | |
| #define SDVO_TMDS_MASK (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_TMDS1) | |
| #define SDVO_RGB_MASK (SDVO_OUTPUT_RGB0 | SDVO_OUTPUT_RGB1) | |
| #define SDVO_LVDS_MASK (SDVO_OUTPUT_LVDS0 | SDVO_OUTPUT_LVDS1) | |
| #define SDVO_TV_MASK (SDVO_OUTPUT_CVBS0 | SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_YPRPB0) | |
| #define SDVO_OUTPUT_MASK (SDVO_TMDS_MASK | SDVO_RGB_MASK | SDVO_LVDS_MASK |\ | |
| SDVO_TV_MASK) | |
| #define IS_TV(c) (c->output_flag & SDVO_TV_MASK) | |
| #define IS_TMDS(c) (c->output_flag & SDVO_TMDS_MASK) | |
| #define IS_LVDS(c) (c->output_flag & SDVO_LVDS_MASK) | |
| #define IS_TV_OR_LVDS(c) (c->output_flag & (SDVO_TV_MASK | SDVO_LVDS_MASK)) | |
| #define IS_DIGITAL(c) (c->output_flag & (SDVO_TMDS_MASK | SDVO_LVDS_MASK)) | |
| static const char * const tv_format_names[] = { | |
| "NTSC_M" , "NTSC_J" , "NTSC_443", | |
| "PAL_B" , "PAL_D" , "PAL_G" , | |
| "PAL_H" , "PAL_I" , "PAL_M" , | |
| "PAL_N" , "PAL_NC" , "PAL_60" , | |
| "SECAM_B" , "SECAM_D" , "SECAM_G" , | |
| "SECAM_K" , "SECAM_K1", "SECAM_L" , | |
| "SECAM_60" | |
| }; | |
| #define TV_FORMAT_NUM ARRAY_SIZE(tv_format_names) | |
| struct intel_sdvo { | |
| struct intel_encoder base; | |
| struct i2c_adapter *i2c; | |
| u8 slave_addr; | |
| struct i2c_adapter ddc; | |
| /* Register for the SDVO device: SDVOB or SDVOC */ | |
| i915_reg_t sdvo_reg; | |
| /* Active outputs controlled by this SDVO output */ | |
| uint16_t controlled_output; | |
| /* | |
| * Capabilities of the SDVO device returned by | |
| * intel_sdvo_get_capabilities() | |
| */ | |
| struct intel_sdvo_caps caps; | |
| /* Pixel clock limitations reported by the SDVO device, in kHz */ | |
| int pixel_clock_min, pixel_clock_max; | |
| /* | |
| * For multiple function SDVO device, | |
| * this is for current attached outputs. | |
| */ | |
| uint16_t attached_output; | |
| /* | |
| * Hotplug activation bits for this device | |
| */ | |
| uint16_t hotplug_active; | |
| /** | |
| * This is set if we're going to treat the device as TV-out. | |
| * | |
| * While we have these nice friendly flags for output types that ought | |
| * to decide this for us, the S-Video output on our HDMI+S-Video card | |
| * shows up as RGB1 (VGA). | |
| */ | |
| bool is_tv; | |
| enum port port; | |
| /** | |
| * This is set if we treat the device as HDMI, instead of DVI. | |
| */ | |
| bool is_hdmi; | |
| bool has_hdmi_monitor; | |
| bool has_hdmi_audio; | |
| bool rgb_quant_range_selectable; | |
| /** | |
| * This is set if we detect output of sdvo device as LVDS and | |
| * have a valid fixed mode to use with the panel. | |
| */ | |
| bool is_lvds; | |
| /** | |
| * This is sdvo fixed pannel mode pointer | |
| */ | |
| struct drm_display_mode *sdvo_lvds_fixed_mode; | |
| /* DDC bus used by this SDVO encoder */ | |
| uint8_t ddc_bus; | |
| /* | |
| * the sdvo flag gets lost in round trip: dtd->adjusted_mode->dtd | |
| */ | |
| uint8_t dtd_sdvo_flags; | |
| }; | |
| struct intel_sdvo_connector { | |
| struct intel_connector base; | |
| /* Mark the type of connector */ | |
| uint16_t output_flag; | |
| /* This contains all current supported TV format */ | |
| u8 tv_format_supported[TV_FORMAT_NUM]; | |
| int format_supported_num; | |
| struct drm_property *tv_format; | |
| /* add the property for the SDVO-TV */ | |
| struct drm_property *left; | |
| struct drm_property *right; | |
| struct drm_property *top; | |
| struct drm_property *bottom; | |
| struct drm_property *hpos; | |
| struct drm_property *vpos; | |
| struct drm_property *contrast; | |
| struct drm_property *saturation; | |
| struct drm_property *hue; | |
| struct drm_property *sharpness; | |
| struct drm_property *flicker_filter; | |
| struct drm_property *flicker_filter_adaptive; | |
| struct drm_property *flicker_filter_2d; | |
| struct drm_property *tv_chroma_filter; | |
| struct drm_property *tv_luma_filter; | |
| struct drm_property *dot_crawl; | |
| /* add the property for the SDVO-TV/LVDS */ | |
| struct drm_property *brightness; | |
| /* this is to get the range of margin.*/ | |
| u32 max_hscan, max_vscan; | |
| }; | |
| struct intel_sdvo_connector_state { | |
| /* base.base: tv.saturation/contrast/hue/brightness */ | |
| struct intel_digital_connector_state base; | |
| struct { | |
| unsigned overscan_h, overscan_v, hpos, vpos, sharpness; | |
| unsigned flicker_filter, flicker_filter_2d, flicker_filter_adaptive; | |
| unsigned chroma_filter, luma_filter, dot_crawl; | |
| } tv; | |
| }; | |
| static struct intel_sdvo *to_sdvo(struct intel_encoder *encoder) | |
| { | |
| return container_of(encoder, struct intel_sdvo, base); | |
| } | |
| static struct intel_sdvo *intel_attached_sdvo(struct drm_connector *connector) | |
| { | |
| return to_sdvo(intel_attached_encoder(connector)); | |
| } | |
| static struct intel_sdvo_connector * | |
| to_intel_sdvo_connector(struct drm_connector *connector) | |
| { | |
| return container_of(connector, struct intel_sdvo_connector, base.base); | |
| } | |
| static struct intel_sdvo_connector_state * | |
| to_intel_sdvo_connector_state(struct drm_connector_state *conn_state) | |
| { | |
| return container_of(conn_state, struct intel_sdvo_connector_state, base.base); | |
| } | |
| static bool | |
| intel_sdvo_output_setup(struct intel_sdvo *intel_sdvo, uint16_t flags); | |
| static bool | |
| intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo, | |
| struct intel_sdvo_connector *intel_sdvo_connector, | |
| int type); | |
| static bool | |
| intel_sdvo_create_enhance_property(struct intel_sdvo *intel_sdvo, | |
| struct intel_sdvo_connector *intel_sdvo_connector); | |
| /** | |
| * Writes the SDVOB or SDVOC with the given value, but always writes both | |
| * SDVOB and SDVOC to work around apparent hardware issues (according to | |
| * comments in the BIOS). | |
| */ | |
| static void intel_sdvo_write_sdvox(struct intel_sdvo *intel_sdvo, u32 val) | |
| { | |
| struct drm_device *dev = intel_sdvo->base.base.dev; | |
| struct drm_i915_private *dev_priv = to_i915(dev); | |
| u32 bval = val, cval = val; | |
| int i; | |
| if (HAS_PCH_SPLIT(dev_priv)) { | |
| I915_WRITE(intel_sdvo->sdvo_reg, val); | |
| POSTING_READ(intel_sdvo->sdvo_reg); | |
| /* | |
| * HW workaround, need to write this twice for issue | |
| * that may result in first write getting masked. | |
| */ | |
| if (HAS_PCH_IBX(dev_priv)) { | |
| I915_WRITE(intel_sdvo->sdvo_reg, val); | |
| POSTING_READ(intel_sdvo->sdvo_reg); | |
| } | |
| return; | |
| } | |
| if (intel_sdvo->port == PORT_B) | |
| cval = I915_READ(GEN3_SDVOC); | |
| else | |
| bval = I915_READ(GEN3_SDVOB); | |
| /* | |
| * Write the registers twice for luck. Sometimes, | |
| * writing them only once doesn't appear to 'stick'. | |
| * The BIOS does this too. Yay, magic | |
| */ | |
| for (i = 0; i < 2; i++) | |
| { | |
| I915_WRITE(GEN3_SDVOB, bval); | |
| POSTING_READ(GEN3_SDVOB); | |
| I915_WRITE(GEN3_SDVOC, cval); | |
| POSTING_READ(GEN3_SDVOC); | |
| } | |
| } | |
| static bool intel_sdvo_read_byte(struct intel_sdvo *intel_sdvo, u8 addr, u8 *ch) | |
| { | |
| struct i2c_msg msgs[] = { | |
| { | |
| .addr = intel_sdvo->slave_addr, | |
| .flags = 0, | |
| .len = 1, | |
| .buf = &addr, | |
| }, | |
| { | |
| .addr = intel_sdvo->slave_addr, | |
| .flags = I2C_M_RD, | |
| .len = 1, | |
| .buf = ch, | |
| } | |
| }; | |
| int ret; | |
| if ((ret = i2c_transfer(intel_sdvo->i2c, msgs, 2)) == 2) | |
| return true; | |
| DRM_DEBUG_KMS("i2c transfer returned %d\n", ret); | |
| return false; | |
| } | |
| #define SDVO_CMD_NAME_ENTRY(cmd) {cmd, #cmd} | |
| /** Mapping of command numbers to names, for debug output */ | |
| static const struct _sdvo_cmd_name { | |
| u8 cmd; | |
| const char *name; | |
| } __attribute__ ((packed)) sdvo_cmd_names[] = { | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_RESET), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DEVICE_CAPS), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FIRMWARE_REV), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TRAINED_INPUTS), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_OUTPUTS), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_OUTPUTS), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_IN_OUT_MAP), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_IN_OUT_MAP), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ATTACHED_DISPLAYS), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HOT_PLUG_SUPPORT), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ACTIVE_HOT_PLUG), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ACTIVE_HOT_PLUG), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_INPUT), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TARGET_OUTPUT), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART1), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_TIMINGS_PART2), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART2), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_INPUT_TIMINGS_PART1), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART1), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OUTPUT_TIMINGS_PART2), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART1), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_TIMINGS_PART2), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CLOCK_RATE_MULT), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CLOCK_RATE_MULT), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_TV_FORMATS), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_FORMAT), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_FORMAT), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_POWER_STATES), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_POWER_STATE), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ENCODER_POWER_STATE), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_DISPLAY_POWER_STATE), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTROL_BUS_SWITCH), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SCALED_HDTV_RESOLUTION_SUPPORT), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS), | |
| /* Add the op code for SDVO enhancements */ | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_HPOS), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HPOS), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HPOS), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_VPOS), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_VPOS), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_VPOS), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_SATURATION), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SATURATION), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_SATURATION), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_HUE), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HUE), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HUE), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_CONTRAST), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_CONTRAST), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_CONTRAST), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_BRIGHTNESS), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_BRIGHTNESS), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_BRIGHTNESS), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_OVERSCAN_H), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OVERSCAN_H), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OVERSCAN_H), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_OVERSCAN_V), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_OVERSCAN_V), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_OVERSCAN_V), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER_ADAPTIVE), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER_ADAPTIVE), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER_ADAPTIVE), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_FLICKER_FILTER_2D), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_FLICKER_FILTER_2D), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_FLICKER_FILTER_2D), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_SHARPNESS), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SHARPNESS), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_SHARPNESS), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_DOT_CRAWL), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_DOT_CRAWL), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_TV_CHROMA_FILTER), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_CHROMA_FILTER), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_CHROMA_FILTER), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_MAX_TV_LUMA_FILTER), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_TV_LUMA_FILTER), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_TV_LUMA_FILTER), | |
| /* HDMI op code */ | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_SUPP_ENCODE), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_ENCODE), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_ENCODE), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_PIXEL_REPLI), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_PIXEL_REPLI), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_COLORIMETRY_CAP), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_COLORIMETRY), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_COLORIMETRY), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_AUDIO_ENCRYPT_PREFER), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_AUDIO_STAT), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_AUDIO_STAT), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_INDEX), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_INDEX), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_INFO), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_AV_SPLIT), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_AV_SPLIT), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_TXRATE), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_TXRATE), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_SET_HBUF_DATA), | |
| SDVO_CMD_NAME_ENTRY(SDVO_CMD_GET_HBUF_DATA), | |
| }; | |
| #define SDVO_NAME(svdo) ((svdo)->port == PORT_B ? "SDVOB" : "SDVOC") | |
| static void intel_sdvo_debug_write(struct intel_sdvo *intel_sdvo, u8 cmd, | |
| const void *args, int args_len) | |
| { | |
| int i, pos = 0; | |
| #define BUF_LEN 256 | |
| char buffer[BUF_LEN]; | |
| #define BUF_PRINT(args...) \ | |
| pos += snprintf(buffer + pos, max_t(int, BUF_LEN - pos, 0), args) | |
| for (i = 0; i < args_len; i++) { | |
| BUF_PRINT("%02X ", ((u8 *)args)[i]); | |
| } | |
| for (; i < 8; i++) { | |
| BUF_PRINT(" "); | |
| } | |
| for (i = 0; i < ARRAY_SIZE(sdvo_cmd_names); i++) { | |
| if (cmd == sdvo_cmd_names[i].cmd) { | |
| BUF_PRINT("(%s)", sdvo_cmd_names[i].name); | |
| break; | |
| } | |
| } | |
| if (i == ARRAY_SIZE(sdvo_cmd_names)) { | |
| BUF_PRINT("(%02X)", cmd); | |
| } | |
| BUG_ON(pos >= BUF_LEN - 1); | |
| #undef BUF_PRINT | |
| #undef BUF_LEN | |
| DRM_DEBUG_KMS("%s: W: %02X %s\n", SDVO_NAME(intel_sdvo), cmd, buffer); | |
| } | |
| static const char * const cmd_status_names[] = { | |
| "Power on", | |
| "Success", | |
| "Not supported", | |
| "Invalid arg", | |
| "Pending", | |
| "Target not specified", | |
| "Scaling not supported" | |
| }; | |
| static bool __intel_sdvo_write_cmd(struct intel_sdvo *intel_sdvo, u8 cmd, | |
| const void *args, int args_len, | |
| bool unlocked) | |
| { | |
| u8 *buf, status; | |
| struct i2c_msg *msgs; | |
| int i, ret = true; | |
| /* Would be simpler to allocate both in one go ? */ | |
| buf = kzalloc(args_len * 2 + 2, GFP_KERNEL); | |
| if (!buf) | |
| return false; | |
| msgs = kcalloc(args_len + 3, sizeof(*msgs), GFP_KERNEL); | |
| if (!msgs) { | |
| kfree(buf); | |
| return false; | |
| } | |
| intel_sdvo_debug_write(intel_sdvo, cmd, args, args_len); | |
| for (i = 0; i < args_len; i++) { | |
| msgs[i].addr = intel_sdvo->slave_addr; | |
| msgs[i].flags = 0; | |
| msgs[i].len = 2; | |
| msgs[i].buf = buf + 2 *i; | |
| buf[2*i + 0] = SDVO_I2C_ARG_0 - i; | |
| buf[2*i + 1] = ((u8*)args)[i]; | |
| } | |
| msgs[i].addr = intel_sdvo->slave_addr; | |
| msgs[i].flags = 0; | |
| msgs[i].len = 2; | |
| msgs[i].buf = buf + 2*i; | |
| buf[2*i + 0] = SDVO_I2C_OPCODE; | |
| buf[2*i + 1] = cmd; | |
| /* the following two are to read the response */ | |
| status = SDVO_I2C_CMD_STATUS; | |
| msgs[i+1].addr = intel_sdvo->slave_addr; | |
| msgs[i+1].flags = 0; | |
| msgs[i+1].len = 1; | |
| msgs[i+1].buf = &status; | |
| msgs[i+2].addr = intel_sdvo->slave_addr; | |
| msgs[i+2].flags = I2C_M_RD; | |
| msgs[i+2].len = 1; | |
| msgs[i+2].buf = &status; | |
| if (unlocked) | |
| ret = i2c_transfer(intel_sdvo->i2c, msgs, i+3); | |
| else | |
| ret = __i2c_transfer(intel_sdvo->i2c, msgs, i+3); | |
| if (ret < 0) { | |
| DRM_DEBUG_KMS("I2c transfer returned %d\n", ret); | |
| ret = false; | |
| goto out; | |
| } | |
| if (ret != i+3) { | |
| /* failure in I2C transfer */ | |
| DRM_DEBUG_KMS("I2c transfer returned %d/%d\n", ret, i+3); | |
| ret = false; | |
| } | |
| out: | |
| kfree(msgs); | |
| kfree(buf); | |
| return ret; | |
| } | |
| static bool intel_sdvo_write_cmd(struct intel_sdvo *intel_sdvo, u8 cmd, | |
| const void *args, int args_len) | |
| { | |
| return __intel_sdvo_write_cmd(intel_sdvo, cmd, args, args_len, true); | |
| } | |
| static bool intel_sdvo_read_response(struct intel_sdvo *intel_sdvo, | |
| void *response, int response_len) | |
| { | |
| u8 retry = 15; /* 5 quick checks, followed by 10 long checks */ | |
| u8 status; | |
| int i, pos = 0; | |
| #define BUF_LEN 256 | |
| char buffer[BUF_LEN]; | |
| /* | |
| * The documentation states that all commands will be | |
| * processed within 15µs, and that we need only poll | |
| * the status byte a maximum of 3 times in order for the | |
| * command to be complete. | |
| * | |
| * Check 5 times in case the hardware failed to read the docs. | |
| * | |
| * Also beware that the first response by many devices is to | |
| * reply PENDING and stall for time. TVs are notorious for | |
| * requiring longer than specified to complete their replies. | |
| * Originally (in the DDX long ago), the delay was only ever 15ms | |
| * with an additional delay of 30ms applied for TVs added later after | |
| * many experiments. To accommodate both sets of delays, we do a | |
| * sequence of slow checks if the device is falling behind and fails | |
| * to reply within 5*15µs. | |
| */ | |
| if (!intel_sdvo_read_byte(intel_sdvo, | |
| SDVO_I2C_CMD_STATUS, | |
| &status)) | |
| goto log_fail; | |
| while ((status == SDVO_CMD_STATUS_PENDING || | |
| status == SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED) && --retry) { | |
| if (retry < 10) | |
| msleep(15); | |
| else | |
| udelay(15); | |
| if (!intel_sdvo_read_byte(intel_sdvo, | |
| SDVO_I2C_CMD_STATUS, | |
| &status)) | |
| goto log_fail; | |
| } | |
| #define BUF_PRINT(args...) \ | |
| pos += snprintf(buffer + pos, max_t(int, BUF_LEN - pos, 0), args) | |
| if (status <= SDVO_CMD_STATUS_SCALING_NOT_SUPP) | |
| BUF_PRINT("(%s)", cmd_status_names[status]); | |
| else | |
| BUF_PRINT("(??? %d)", status); | |
| if (status != SDVO_CMD_STATUS_SUCCESS) | |
| goto log_fail; | |
| /* Read the command response */ | |
| for (i = 0; i < response_len; i++) { | |
| if (!intel_sdvo_read_byte(intel_sdvo, | |
| SDVO_I2C_RETURN_0 + i, | |
| &((u8 *)response)[i])) | |
| goto log_fail; | |
| BUF_PRINT(" %02X", ((u8 *)response)[i]); | |
| } | |
| BUG_ON(pos >= BUF_LEN - 1); | |
| #undef BUF_PRINT | |
| #undef BUF_LEN | |
| DRM_DEBUG_KMS("%s: R: %s\n", SDVO_NAME(intel_sdvo), buffer); | |
| return true; | |
| log_fail: | |
| DRM_DEBUG_KMS("%s: R: ... failed\n", SDVO_NAME(intel_sdvo)); | |
| return false; | |
| } | |
| static int intel_sdvo_get_pixel_multiplier(const struct drm_display_mode *adjusted_mode) | |
| { | |
| if (adjusted_mode->crtc_clock >= 100000) | |
| return 1; | |
| else if (adjusted_mode->crtc_clock >= 50000) | |
| return 2; | |
| else | |
| return 4; | |
| } | |
| static bool __intel_sdvo_set_control_bus_switch(struct intel_sdvo *intel_sdvo, | |
| u8 ddc_bus) | |
| { | |
| /* This must be the immediately preceding write before the i2c xfer */ | |
| return __intel_sdvo_write_cmd(intel_sdvo, | |
| SDVO_CMD_SET_CONTROL_BUS_SWITCH, | |
| &ddc_bus, 1, false); | |
| } | |
| static bool intel_sdvo_set_value(struct intel_sdvo *intel_sdvo, u8 cmd, const void *data, int len) | |
| { | |
| if (!intel_sdvo_write_cmd(intel_sdvo, cmd, data, len)) | |
| return false; | |
| return intel_sdvo_read_response(intel_sdvo, NULL, 0); | |
| } | |
| static bool | |
| intel_sdvo_get_value(struct intel_sdvo *intel_sdvo, u8 cmd, void *value, int len) | |
| { | |
| if (!intel_sdvo_write_cmd(intel_sdvo, cmd, NULL, 0)) | |
| return false; | |
| return intel_sdvo_read_response(intel_sdvo, value, len); | |
| } | |
| static bool intel_sdvo_set_target_input(struct intel_sdvo *intel_sdvo) | |
| { | |
| struct intel_sdvo_set_target_input_args targets = {0}; | |
| return intel_sdvo_set_value(intel_sdvo, | |
| SDVO_CMD_SET_TARGET_INPUT, | |
| &targets, sizeof(targets)); | |
| } | |
| /** | |
| * Return whether each input is trained. | |
| * | |
| * This function is making an assumption about the layout of the response, | |
| * which should be checked against the docs. | |
| */ | |
| static bool intel_sdvo_get_trained_inputs(struct intel_sdvo *intel_sdvo, bool *input_1, bool *input_2) | |
| { | |
| struct intel_sdvo_get_trained_inputs_response response; | |
| BUILD_BUG_ON(sizeof(response) != 1); | |
| if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_TRAINED_INPUTS, | |
| &response, sizeof(response))) | |
| return false; | |
| *input_1 = response.input0_trained; | |
| *input_2 = response.input1_trained; | |
| return true; | |
| } | |
| static bool intel_sdvo_set_active_outputs(struct intel_sdvo *intel_sdvo, | |
| u16 outputs) | |
| { | |
| return intel_sdvo_set_value(intel_sdvo, | |
| SDVO_CMD_SET_ACTIVE_OUTPUTS, | |
| &outputs, sizeof(outputs)); | |
| } | |
| static bool intel_sdvo_get_active_outputs(struct intel_sdvo *intel_sdvo, | |
| u16 *outputs) | |
| { | |
| return intel_sdvo_get_value(intel_sdvo, | |
| SDVO_CMD_GET_ACTIVE_OUTPUTS, | |
| outputs, sizeof(*outputs)); | |
| } | |
| static bool intel_sdvo_set_encoder_power_state(struct intel_sdvo *intel_sdvo, | |
| int mode) | |
| { | |
| u8 state = SDVO_ENCODER_STATE_ON; | |
| switch (mode) { | |
| case DRM_MODE_DPMS_ON: | |
| state = SDVO_ENCODER_STATE_ON; | |
| break; | |
| case DRM_MODE_DPMS_STANDBY: | |
| state = SDVO_ENCODER_STATE_STANDBY; | |
| break; | |
| case DRM_MODE_DPMS_SUSPEND: | |
| state = SDVO_ENCODER_STATE_SUSPEND; | |
| break; | |
| case DRM_MODE_DPMS_OFF: | |
| state = SDVO_ENCODER_STATE_OFF; | |
| break; | |
| } | |
| return intel_sdvo_set_value(intel_sdvo, | |
| SDVO_CMD_SET_ENCODER_POWER_STATE, &state, sizeof(state)); | |
| } | |
| static bool intel_sdvo_get_input_pixel_clock_range(struct intel_sdvo *intel_sdvo, | |
| int *clock_min, | |
| int *clock_max) | |
| { | |
| struct intel_sdvo_pixel_clock_range clocks; | |
| BUILD_BUG_ON(sizeof(clocks) != 4); | |
| if (!intel_sdvo_get_value(intel_sdvo, | |
| SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE, | |
| &clocks, sizeof(clocks))) | |
| return false; | |
| /* Convert the values from units of 10 kHz to kHz. */ | |
| *clock_min = clocks.min * 10; | |
| *clock_max = clocks.max * 10; | |
| return true; | |
| } | |
| static bool intel_sdvo_set_target_output(struct intel_sdvo *intel_sdvo, | |
| u16 outputs) | |
| { | |
| return intel_sdvo_set_value(intel_sdvo, | |
| SDVO_CMD_SET_TARGET_OUTPUT, | |
| &outputs, sizeof(outputs)); | |
| } | |
| static bool intel_sdvo_set_timing(struct intel_sdvo *intel_sdvo, u8 cmd, | |
| struct intel_sdvo_dtd *dtd) | |
| { | |
| return intel_sdvo_set_value(intel_sdvo, cmd, &dtd->part1, sizeof(dtd->part1)) && | |
| intel_sdvo_set_value(intel_sdvo, cmd + 1, &dtd->part2, sizeof(dtd->part2)); | |
| } | |
| static bool intel_sdvo_get_timing(struct intel_sdvo *intel_sdvo, u8 cmd, | |
| struct intel_sdvo_dtd *dtd) | |
| { | |
| return intel_sdvo_get_value(intel_sdvo, cmd, &dtd->part1, sizeof(dtd->part1)) && | |
| intel_sdvo_get_value(intel_sdvo, cmd + 1, &dtd->part2, sizeof(dtd->part2)); | |
| } | |
| static bool intel_sdvo_set_input_timing(struct intel_sdvo *intel_sdvo, | |
| struct intel_sdvo_dtd *dtd) | |
| { | |
| return intel_sdvo_set_timing(intel_sdvo, | |
| SDVO_CMD_SET_INPUT_TIMINGS_PART1, dtd); | |
| } | |
| static bool intel_sdvo_set_output_timing(struct intel_sdvo *intel_sdvo, | |
| struct intel_sdvo_dtd *dtd) | |
| { | |
| return intel_sdvo_set_timing(intel_sdvo, | |
| SDVO_CMD_SET_OUTPUT_TIMINGS_PART1, dtd); | |
| } | |
| static bool intel_sdvo_get_input_timing(struct intel_sdvo *intel_sdvo, | |
| struct intel_sdvo_dtd *dtd) | |
| { | |
| return intel_sdvo_get_timing(intel_sdvo, | |
| SDVO_CMD_GET_INPUT_TIMINGS_PART1, dtd); | |
| } | |
| static bool | |
| intel_sdvo_create_preferred_input_timing(struct intel_sdvo *intel_sdvo, | |
| uint16_t clock, | |
| uint16_t width, | |
| uint16_t height) | |
| { | |
| struct intel_sdvo_preferred_input_timing_args args; | |
| memset(&args, 0, sizeof(args)); | |
| args.clock = clock; | |
| args.width = width; | |
| args.height = height; | |
| args.interlace = 0; | |
| if (intel_sdvo->is_lvds && | |
| (intel_sdvo->sdvo_lvds_fixed_mode->hdisplay != width || | |
| intel_sdvo->sdvo_lvds_fixed_mode->vdisplay != height)) | |
| args.scaled = 1; | |
| return intel_sdvo_set_value(intel_sdvo, | |
| SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING, | |
| &args, sizeof(args)); | |
| } | |
| static bool intel_sdvo_get_preferred_input_timing(struct intel_sdvo *intel_sdvo, | |
| struct intel_sdvo_dtd *dtd) | |
| { | |
| BUILD_BUG_ON(sizeof(dtd->part1) != 8); | |
| BUILD_BUG_ON(sizeof(dtd->part2) != 8); | |
| return intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1, | |
| &dtd->part1, sizeof(dtd->part1)) && | |
| intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2, | |
| &dtd->part2, sizeof(dtd->part2)); | |
| } | |
| static bool intel_sdvo_set_clock_rate_mult(struct intel_sdvo *intel_sdvo, u8 val) | |
| { | |
| return intel_sdvo_set_value(intel_sdvo, SDVO_CMD_SET_CLOCK_RATE_MULT, &val, 1); | |
| } | |
| static void intel_sdvo_get_dtd_from_mode(struct intel_sdvo_dtd *dtd, | |
| const struct drm_display_mode *mode) | |
| { | |
| uint16_t width, height; | |
| uint16_t h_blank_len, h_sync_len, v_blank_len, v_sync_len; | |
| uint16_t h_sync_offset, v_sync_offset; | |
| int mode_clock; | |
| memset(dtd, 0, sizeof(*dtd)); | |
| width = mode->hdisplay; | |
| height = mode->vdisplay; | |
| /* do some mode translations */ | |
| h_blank_len = mode->htotal - mode->hdisplay; | |
| h_sync_len = mode->hsync_end - mode->hsync_start; | |
| v_blank_len = mode->vtotal - mode->vdisplay; | |
| v_sync_len = mode->vsync_end - mode->vsync_start; | |
| h_sync_offset = mode->hsync_start - mode->hdisplay; | |
| v_sync_offset = mode->vsync_start - mode->vdisplay; | |
| mode_clock = mode->clock; | |
| mode_clock /= 10; | |
| dtd->part1.clock = mode_clock; | |
| dtd->part1.h_active = width & 0xff; | |
| dtd->part1.h_blank = h_blank_len & 0xff; | |
| dtd->part1.h_high = (((width >> 8) & 0xf) << 4) | | |
| ((h_blank_len >> 8) & 0xf); | |
| dtd->part1.v_active = height & 0xff; | |
| dtd->part1.v_blank = v_blank_len & 0xff; | |
| dtd->part1.v_high = (((height >> 8) & 0xf) << 4) | | |
| ((v_blank_len >> 8) & 0xf); | |
| dtd->part2.h_sync_off = h_sync_offset & 0xff; | |
| dtd->part2.h_sync_width = h_sync_len & 0xff; | |
| dtd->part2.v_sync_off_width = (v_sync_offset & 0xf) << 4 | | |
| (v_sync_len & 0xf); | |
| dtd->part2.sync_off_width_high = ((h_sync_offset & 0x300) >> 2) | | |
| ((h_sync_len & 0x300) >> 4) | ((v_sync_offset & 0x30) >> 2) | | |
| ((v_sync_len & 0x30) >> 4); | |
| dtd->part2.dtd_flags = 0x18; | |
| if (mode->flags & DRM_MODE_FLAG_INTERLACE) | |
| dtd->part2.dtd_flags |= DTD_FLAG_INTERLACE; | |
| if (mode->flags & DRM_MODE_FLAG_PHSYNC) | |
| dtd->part2.dtd_flags |= DTD_FLAG_HSYNC_POSITIVE; | |
| if (mode->flags & DRM_MODE_FLAG_PVSYNC) | |
| dtd->part2.dtd_flags |= DTD_FLAG_VSYNC_POSITIVE; | |
| dtd->part2.v_sync_off_high = v_sync_offset & 0xc0; | |
| } | |
| static void intel_sdvo_get_mode_from_dtd(struct drm_display_mode *pmode, | |
| const struct intel_sdvo_dtd *dtd) | |
| { | |
| struct drm_display_mode mode = {}; | |
| mode.hdisplay = dtd->part1.h_active; | |
| mode.hdisplay += ((dtd->part1.h_high >> 4) & 0x0f) << 8; | |
| mode.hsync_start = mode.hdisplay + dtd->part2.h_sync_off; | |
| mode.hsync_start += (dtd->part2.sync_off_width_high & 0xc0) << 2; | |
| mode.hsync_end = mode.hsync_start + dtd->part2.h_sync_width; | |
| mode.hsync_end += (dtd->part2.sync_off_width_high & 0x30) << 4; | |
| mode.htotal = mode.hdisplay + dtd->part1.h_blank; | |
| mode.htotal += (dtd->part1.h_high & 0xf) << 8; | |
| mode.vdisplay = dtd->part1.v_active; | |
| mode.vdisplay += ((dtd->part1.v_high >> 4) & 0x0f) << 8; | |
| mode.vsync_start = mode.vdisplay; | |
| mode.vsync_start += (dtd->part2.v_sync_off_width >> 4) & 0xf; | |
| mode.vsync_start += (dtd->part2.sync_off_width_high & 0x0c) << 2; | |
| mode.vsync_start += dtd->part2.v_sync_off_high & 0xc0; | |
| mode.vsync_end = mode.vsync_start + | |
| (dtd->part2.v_sync_off_width & 0xf); | |
| mode.vsync_end += (dtd->part2.sync_off_width_high & 0x3) << 4; | |
| mode.vtotal = mode.vdisplay + dtd->part1.v_blank; | |
| mode.vtotal += (dtd->part1.v_high & 0xf) << 8; | |
| mode.clock = dtd->part1.clock * 10; | |
| if (dtd->part2.dtd_flags & DTD_FLAG_INTERLACE) | |
| mode.flags |= DRM_MODE_FLAG_INTERLACE; | |
| if (dtd->part2.dtd_flags & DTD_FLAG_HSYNC_POSITIVE) | |
| mode.flags |= DRM_MODE_FLAG_PHSYNC; | |
| else | |
| mode.flags |= DRM_MODE_FLAG_NHSYNC; | |
| if (dtd->part2.dtd_flags & DTD_FLAG_VSYNC_POSITIVE) | |
| mode.flags |= DRM_MODE_FLAG_PVSYNC; | |
| else | |
| mode.flags |= DRM_MODE_FLAG_NVSYNC; | |
| drm_mode_set_crtcinfo(&mode, 0); | |
| drm_mode_copy(pmode, &mode); | |
| } | |
| static bool intel_sdvo_check_supp_encode(struct intel_sdvo *intel_sdvo) | |
| { | |
| struct intel_sdvo_encode encode; | |
| BUILD_BUG_ON(sizeof(encode) != 2); | |
| return intel_sdvo_get_value(intel_sdvo, | |
| SDVO_CMD_GET_SUPP_ENCODE, | |
| &encode, sizeof(encode)); | |
| } | |
| static bool intel_sdvo_set_encode(struct intel_sdvo *intel_sdvo, | |
| uint8_t mode) | |
| { | |
| return intel_sdvo_set_value(intel_sdvo, SDVO_CMD_SET_ENCODE, &mode, 1); | |
| } | |
| static bool intel_sdvo_set_colorimetry(struct intel_sdvo *intel_sdvo, | |
| uint8_t mode) | |
| { | |
| return intel_sdvo_set_value(intel_sdvo, SDVO_CMD_SET_COLORIMETRY, &mode, 1); | |
| } | |
| #if 0 | |
| static void intel_sdvo_dump_hdmi_buf(struct intel_sdvo *intel_sdvo) | |
| { | |
| int i, j; | |
| uint8_t set_buf_index[2]; | |
| uint8_t av_split; | |
| uint8_t buf_size; | |
| uint8_t buf[48]; | |
| uint8_t *pos; | |
| intel_sdvo_get_value(encoder, SDVO_CMD_GET_HBUF_AV_SPLIT, &av_split, 1); | |
| for (i = 0; i <= av_split; i++) { | |
| set_buf_index[0] = i; set_buf_index[1] = 0; | |
| intel_sdvo_write_cmd(encoder, SDVO_CMD_SET_HBUF_INDEX, | |
| set_buf_index, 2); | |
| intel_sdvo_write_cmd(encoder, SDVO_CMD_GET_HBUF_INFO, NULL, 0); | |
| intel_sdvo_read_response(encoder, &buf_size, 1); | |
| pos = buf; | |
| for (j = 0; j <= buf_size; j += 8) { | |
| intel_sdvo_write_cmd(encoder, SDVO_CMD_GET_HBUF_DATA, | |
| NULL, 0); | |
| intel_sdvo_read_response(encoder, pos, 8); | |
| pos += 8; | |
| } | |
| } | |
| } | |
| #endif | |
| static bool intel_sdvo_write_infoframe(struct intel_sdvo *intel_sdvo, | |
| unsigned if_index, uint8_t tx_rate, | |
| const uint8_t *data, unsigned length) | |
| { | |
| uint8_t set_buf_index[2] = { if_index, 0 }; | |
| uint8_t hbuf_size, tmp[8]; | |
| int i; | |
| if (!intel_sdvo_set_value(intel_sdvo, | |
| SDVO_CMD_SET_HBUF_INDEX, | |
| set_buf_index, 2)) | |
| return false; | |
| if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HBUF_INFO, | |
| &hbuf_size, 1)) | |
| return false; | |
| /* Buffer size is 0 based, hooray! */ | |
| hbuf_size++; | |
| DRM_DEBUG_KMS("writing sdvo hbuf: %i, hbuf_size %i, hbuf_size: %i\n", | |
| if_index, length, hbuf_size); | |
| for (i = 0; i < hbuf_size; i += 8) { | |
| memset(tmp, 0, 8); | |
| if (i < length) | |
| memcpy(tmp, data + i, min_t(unsigned, 8, length - i)); | |
| if (!intel_sdvo_set_value(intel_sdvo, | |
| SDVO_CMD_SET_HBUF_DATA, | |
| tmp, 8)) | |
| return false; | |
| } | |
| return intel_sdvo_set_value(intel_sdvo, | |
| SDVO_CMD_SET_HBUF_TXRATE, | |
| &tx_rate, 1); | |
| } | |
| static bool intel_sdvo_set_avi_infoframe(struct intel_sdvo *intel_sdvo, | |
| struct intel_crtc_state *pipe_config) | |
| { | |
| uint8_t sdvo_data[HDMI_INFOFRAME_SIZE(AVI)]; | |
| union hdmi_infoframe frame; | |
| int ret; | |
| ssize_t len; | |
| ret = drm_hdmi_avi_infoframe_from_display_mode(&frame.avi, | |
| &pipe_config->base.adjusted_mode, | |
| false); | |
| if (ret < 0) { | |
| DRM_ERROR("couldn't fill AVI infoframe\n"); | |
| return false; | |
| } | |
| if (intel_sdvo->rgb_quant_range_selectable) { | |
| if (pipe_config->limited_color_range) | |
| frame.avi.quantization_range = | |
| HDMI_QUANTIZATION_RANGE_LIMITED; | |
| else | |
| frame.avi.quantization_range = | |
| HDMI_QUANTIZATION_RANGE_FULL; | |
| } | |
| len = hdmi_infoframe_pack(&frame, sdvo_data, sizeof(sdvo_data)); | |
| if (len < 0) | |
| return false; | |
| return intel_sdvo_write_infoframe(intel_sdvo, SDVO_HBUF_INDEX_AVI_IF, | |
| SDVO_HBUF_TX_VSYNC, | |
| sdvo_data, sizeof(sdvo_data)); | |
| } | |
| static bool intel_sdvo_set_tv_format(struct intel_sdvo *intel_sdvo, | |
| struct drm_connector_state *conn_state) | |
| { | |
| struct intel_sdvo_tv_format format; | |
| uint32_t format_map; | |
| format_map = 1 << conn_state->tv.mode; | |
| memset(&format, 0, sizeof(format)); | |
| memcpy(&format, &format_map, min(sizeof(format), sizeof(format_map))); | |
| BUILD_BUG_ON(sizeof(format) != 6); | |
| return intel_sdvo_set_value(intel_sdvo, | |
| SDVO_CMD_SET_TV_FORMAT, | |
| &format, sizeof(format)); | |
| } | |
| static bool | |
| intel_sdvo_set_output_timings_from_mode(struct intel_sdvo *intel_sdvo, | |
| const struct drm_display_mode *mode) | |
| { | |
| struct intel_sdvo_dtd output_dtd; | |
| if (!intel_sdvo_set_target_output(intel_sdvo, | |
| intel_sdvo->attached_output)) | |
| return false; | |
| intel_sdvo_get_dtd_from_mode(&output_dtd, mode); | |
| if (!intel_sdvo_set_output_timing(intel_sdvo, &output_dtd)) | |
| return false; | |
| return true; | |
| } | |
| /* Asks the sdvo controller for the preferred input mode given the output mode. | |
| * Unfortunately we have to set up the full output mode to do that. */ | |
| static bool | |
| intel_sdvo_get_preferred_input_mode(struct intel_sdvo *intel_sdvo, | |
| const struct drm_display_mode *mode, | |
| struct drm_display_mode *adjusted_mode) | |
| { | |
| struct intel_sdvo_dtd input_dtd; | |
| /* Reset the input timing to the screen. Assume always input 0. */ | |
| if (!intel_sdvo_set_target_input(intel_sdvo)) | |
| return false; | |
| if (!intel_sdvo_create_preferred_input_timing(intel_sdvo, | |
| mode->clock / 10, | |
| mode->hdisplay, | |
| mode->vdisplay)) | |
| return false; | |
| if (!intel_sdvo_get_preferred_input_timing(intel_sdvo, | |
| &input_dtd)) | |
| return false; | |
| intel_sdvo_get_mode_from_dtd(adjusted_mode, &input_dtd); | |
| intel_sdvo->dtd_sdvo_flags = input_dtd.part2.sdvo_flags; | |
| return true; | |
| } | |
| static void i9xx_adjust_sdvo_tv_clock(struct intel_crtc_state *pipe_config) | |
| { | |
| unsigned dotclock = pipe_config->port_clock; | |
| struct dpll *clock = &pipe_config->dpll; | |
| /* SDVO TV has fixed PLL values depend on its clock range, | |
| this mirrors vbios setting. */ | |
| if (dotclock >= 100000 && dotclock < 140500) { | |
| clock->p1 = 2; | |
| clock->p2 = 10; | |
| clock->n = 3; | |
| clock->m1 = 16; | |
| clock->m2 = 8; | |
| } else if (dotclock >= 140500 && dotclock <= 200000) { | |
| clock->p1 = 1; | |
| clock->p2 = 10; | |
| clock->n = 6; | |
| clock->m1 = 12; | |
| clock->m2 = 8; | |
| } else { | |
| WARN(1, "SDVO TV clock out of range: %i\n", dotclock); | |
| } | |
| pipe_config->clock_set = true; | |
| } | |
| static bool intel_sdvo_compute_config(struct intel_encoder *encoder, | |
| struct intel_crtc_state *pipe_config, | |
| struct drm_connector_state *conn_state) | |
| { | |
| struct intel_sdvo *intel_sdvo = to_sdvo(encoder); | |
| struct intel_sdvo_connector_state *intel_sdvo_state = | |
| to_intel_sdvo_connector_state(conn_state); | |
| struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; | |
| struct drm_display_mode *mode = &pipe_config->base.mode; | |
| DRM_DEBUG_KMS("forcing bpc to 8 for SDVO\n"); | |
| pipe_config->pipe_bpp = 8*3; | |
| if (HAS_PCH_SPLIT(to_i915(encoder->base.dev))) | |
| pipe_config->has_pch_encoder = true; | |
| /* We need to construct preferred input timings based on our | |
| * output timings. To do that, we have to set the output | |
| * timings, even though this isn't really the right place in | |
| * the sequence to do it. Oh well. | |
| */ | |
| if (intel_sdvo->is_tv) { | |
| if (!intel_sdvo_set_output_timings_from_mode(intel_sdvo, mode)) | |
| return false; | |
| (void) intel_sdvo_get_preferred_input_mode(intel_sdvo, | |
| mode, | |
| adjusted_mode); | |
| pipe_config->sdvo_tv_clock = true; | |
| } else if (intel_sdvo->is_lvds) { | |
| if (!intel_sdvo_set_output_timings_from_mode(intel_sdvo, | |
| intel_sdvo->sdvo_lvds_fixed_mode)) | |
| return false; | |
| (void) intel_sdvo_get_preferred_input_mode(intel_sdvo, | |
| mode, | |
| adjusted_mode); | |
| } | |
| /* Make the CRTC code factor in the SDVO pixel multiplier. The | |
| * SDVO device will factor out the multiplier during mode_set. | |
| */ | |
| pipe_config->pixel_multiplier = | |
| intel_sdvo_get_pixel_multiplier(adjusted_mode); | |
| if (intel_sdvo_state->base.force_audio != HDMI_AUDIO_OFF_DVI) | |
| pipe_config->has_hdmi_sink = intel_sdvo->has_hdmi_monitor; | |
| if (intel_sdvo_state->base.force_audio == HDMI_AUDIO_ON || | |
| (intel_sdvo_state->base.force_audio == HDMI_AUDIO_AUTO && intel_sdvo->has_hdmi_audio)) | |
| pipe_config->has_audio = true; | |
| if (intel_sdvo_state->base.broadcast_rgb == INTEL_BROADCAST_RGB_AUTO) { | |
| /* See CEA-861-E - 5.1 Default Encoding Parameters */ | |
| /* FIXME: This bit is only valid when using TMDS encoding and 8 | |
| * bit per color mode. */ | |
| if (pipe_config->has_hdmi_sink && | |
| drm_match_cea_mode(adjusted_mode) > 1) | |
| pipe_config->limited_color_range = true; | |
| } else { | |
| if (pipe_config->has_hdmi_sink && | |
| intel_sdvo_state->base.broadcast_rgb == INTEL_BROADCAST_RGB_LIMITED) | |
| pipe_config->limited_color_range = true; | |
| } | |
| /* Clock computation needs to happen after pixel multiplier. */ | |
| if (intel_sdvo->is_tv) | |
| i9xx_adjust_sdvo_tv_clock(pipe_config); | |
| /* Set user selected PAR to incoming mode's member */ | |
| if (intel_sdvo->is_hdmi) | |
| adjusted_mode->picture_aspect_ratio = conn_state->picture_aspect_ratio; | |
| return true; | |
| } | |
| #define UPDATE_PROPERTY(input, NAME) \ | |
| do { \ | |
| val = input; \ | |
| intel_sdvo_set_value(intel_sdvo, SDVO_CMD_SET_##NAME, &val, sizeof(val)); \ | |
| } while (0) | |
| static void intel_sdvo_update_props(struct intel_sdvo *intel_sdvo, | |
| struct intel_sdvo_connector_state *sdvo_state) | |
| { | |
| struct drm_connector_state *conn_state = &sdvo_state->base.base; | |
| struct intel_sdvo_connector *intel_sdvo_conn = | |
| to_intel_sdvo_connector(conn_state->connector); | |
| uint16_t val; | |
| if (intel_sdvo_conn->left) | |
| UPDATE_PROPERTY(sdvo_state->tv.overscan_h, OVERSCAN_H); | |
| if (intel_sdvo_conn->top) | |
| UPDATE_PROPERTY(sdvo_state->tv.overscan_v, OVERSCAN_V); | |
| if (intel_sdvo_conn->hpos) | |
| UPDATE_PROPERTY(sdvo_state->tv.hpos, HPOS); | |
| if (intel_sdvo_conn->vpos) | |
| UPDATE_PROPERTY(sdvo_state->tv.vpos, VPOS); | |
| if (intel_sdvo_conn->saturation) | |
| UPDATE_PROPERTY(conn_state->tv.saturation, SATURATION); | |
| if (intel_sdvo_conn->contrast) | |
| UPDATE_PROPERTY(conn_state->tv.contrast, CONTRAST); | |
| if (intel_sdvo_conn->hue) | |
| UPDATE_PROPERTY(conn_state->tv.hue, HUE); | |
| if (intel_sdvo_conn->brightness) | |
| UPDATE_PROPERTY(conn_state->tv.brightness, BRIGHTNESS); | |
| if (intel_sdvo_conn->sharpness) | |
| UPDATE_PROPERTY(sdvo_state->tv.sharpness, SHARPNESS); | |
| if (intel_sdvo_conn->flicker_filter) | |
| UPDATE_PROPERTY(sdvo_state->tv.flicker_filter, FLICKER_FILTER); | |
| if (intel_sdvo_conn->flicker_filter_2d) | |
| UPDATE_PROPERTY(sdvo_state->tv.flicker_filter_2d, FLICKER_FILTER_2D); | |
| if (intel_sdvo_conn->flicker_filter_adaptive) | |
| UPDATE_PROPERTY(sdvo_state->tv.flicker_filter_adaptive, FLICKER_FILTER_ADAPTIVE); | |
| if (intel_sdvo_conn->tv_chroma_filter) | |
| UPDATE_PROPERTY(sdvo_state->tv.chroma_filter, TV_CHROMA_FILTER); | |
| if (intel_sdvo_conn->tv_luma_filter) | |
| UPDATE_PROPERTY(sdvo_state->tv.luma_filter, TV_LUMA_FILTER); | |
| if (intel_sdvo_conn->dot_crawl) | |
| UPDATE_PROPERTY(sdvo_state->tv.dot_crawl, DOT_CRAWL); | |
| #undef UPDATE_PROPERTY | |
| } | |
| static void intel_sdvo_pre_enable(struct intel_encoder *intel_encoder, | |
| struct intel_crtc_state *crtc_state, | |
| struct drm_connector_state *conn_state) | |
| { | |
| struct drm_i915_private *dev_priv = to_i915(intel_encoder->base.dev); | |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc); | |
| const struct drm_display_mode *adjusted_mode = &crtc_state->base.adjusted_mode; | |
| struct intel_sdvo_connector_state *sdvo_state = to_intel_sdvo_connector_state(conn_state); | |
| struct drm_display_mode *mode = &crtc_state->base.mode; | |
| struct intel_sdvo *intel_sdvo = to_sdvo(intel_encoder); | |
| u32 sdvox; | |
| struct intel_sdvo_in_out_map in_out; | |
| struct intel_sdvo_dtd input_dtd, output_dtd; | |
| int rate; | |
| intel_sdvo_update_props(intel_sdvo, sdvo_state); | |
| /* First, set the input mapping for the first input to our controlled | |
| * output. This is only correct if we're a single-input device, in | |
| * which case the first input is the output from the appropriate SDVO | |
| * channel on the motherboard. In a two-input device, the first input | |
| * will be SDVOB and the second SDVOC. | |
| */ | |
| in_out.in0 = intel_sdvo->attached_output; | |
| in_out.in1 = 0; | |
| intel_sdvo_set_value(intel_sdvo, | |
| SDVO_CMD_SET_IN_OUT_MAP, | |
| &in_out, sizeof(in_out)); | |
| /* Set the output timings to the screen */ | |
| if (!intel_sdvo_set_target_output(intel_sdvo, | |
| intel_sdvo->attached_output)) | |
| return; | |
| /* lvds has a special fixed output timing. */ | |
| if (intel_sdvo->is_lvds) | |
| intel_sdvo_get_dtd_from_mode(&output_dtd, | |
| intel_sdvo->sdvo_lvds_fixed_mode); | |
| else | |
| intel_sdvo_get_dtd_from_mode(&output_dtd, mode); | |
| if (!intel_sdvo_set_output_timing(intel_sdvo, &output_dtd)) | |
| DRM_INFO("Setting output timings on %s failed\n", | |
| SDVO_NAME(intel_sdvo)); | |
| /* Set the input timing to the screen. Assume always input 0. */ | |
| if (!intel_sdvo_set_target_input(intel_sdvo)) | |
| return; | |
| if (crtc_state->has_hdmi_sink) { | |
| intel_sdvo_set_encode(intel_sdvo, SDVO_ENCODE_HDMI); | |
| intel_sdvo_set_colorimetry(intel_sdvo, | |
| SDVO_COLORIMETRY_RGB256); | |
| intel_sdvo_set_avi_infoframe(intel_sdvo, crtc_state); | |
| } else | |
| intel_sdvo_set_encode(intel_sdvo, SDVO_ENCODE_DVI); | |
| if (intel_sdvo->is_tv && | |
| !intel_sdvo_set_tv_format(intel_sdvo, conn_state)) | |
| return; | |
| intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); | |
| if (intel_sdvo->is_tv || intel_sdvo->is_lvds) | |
| input_dtd.part2.sdvo_flags = intel_sdvo->dtd_sdvo_flags; | |
| if (!intel_sdvo_set_input_timing(intel_sdvo, &input_dtd)) | |
| DRM_INFO("Setting input timings on %s failed\n", | |
| SDVO_NAME(intel_sdvo)); | |
| switch (crtc_state->pixel_multiplier) { | |
| default: | |
| WARN(1, "unknown pixel multiplier specified\n"); | |
| case 1: rate = SDVO_CLOCK_RATE_MULT_1X; break; | |
| case 2: rate = SDVO_CLOCK_RATE_MULT_2X; break; | |
| case 4: rate = SDVO_CLOCK_RATE_MULT_4X; break; | |
| } | |
| if (!intel_sdvo_set_clock_rate_mult(intel_sdvo, rate)) | |
| return; | |
| /* Set the SDVO control regs. */ | |
| if (INTEL_GEN(dev_priv) >= 4) { | |
| /* The real mode polarity is set by the SDVO commands, using | |
| * struct intel_sdvo_dtd. */ | |
| sdvox = SDVO_VSYNC_ACTIVE_HIGH | SDVO_HSYNC_ACTIVE_HIGH; | |
| if (!HAS_PCH_SPLIT(dev_priv) && crtc_state->limited_color_range) | |
| sdvox |= HDMI_COLOR_RANGE_16_235; | |
| if (INTEL_GEN(dev_priv) < 5) | |
| sdvox |= SDVO_BORDER_ENABLE; | |
| } else { | |
| sdvox = I915_READ(intel_sdvo->sdvo_reg); | |
| if (intel_sdvo->port == PORT_B) | |
| sdvox &= SDVOB_PRESERVE_MASK; | |
| else | |
| sdvox &= SDVOC_PRESERVE_MASK; | |
| sdvox |= (9 << 19) | SDVO_BORDER_ENABLE; | |
| } | |
| if (HAS_PCH_CPT(dev_priv)) | |
| sdvox |= SDVO_PIPE_SEL_CPT(crtc->pipe); | |
| else | |
| sdvox |= SDVO_PIPE_SEL(crtc->pipe); | |
| if (crtc_state->has_audio) { | |
| WARN_ON_ONCE(INTEL_GEN(dev_priv) < 4); | |
| sdvox |= SDVO_AUDIO_ENABLE; | |
| } | |
| if (INTEL_GEN(dev_priv) >= 4) { | |
| /* done in crtc_mode_set as the dpll_md reg must be written early */ | |
| } else if (IS_I945G(dev_priv) || IS_I945GM(dev_priv) || | |
| IS_G33(dev_priv) || IS_PINEVIEW(dev_priv)) { | |
| /* done in crtc_mode_set as it lives inside the dpll register */ | |
| } else { | |
| sdvox |= (crtc_state->pixel_multiplier - 1) | |
| << SDVO_PORT_MULTIPLY_SHIFT; | |
| } | |
| if (input_dtd.part2.sdvo_flags & SDVO_NEED_TO_STALL && | |
| INTEL_GEN(dev_priv) < 5) | |
| sdvox |= SDVO_STALL_SELECT; | |
| intel_sdvo_write_sdvox(intel_sdvo, sdvox); | |
| } | |
| static bool intel_sdvo_connector_get_hw_state(struct intel_connector *connector) | |
| { | |
| struct intel_sdvo_connector *intel_sdvo_connector = | |
| to_intel_sdvo_connector(&connector->base); | |
| struct intel_sdvo *intel_sdvo = intel_attached_sdvo(&connector->base); | |
| u16 active_outputs = 0; | |
| intel_sdvo_get_active_outputs(intel_sdvo, &active_outputs); | |
| if (active_outputs & intel_sdvo_connector->output_flag) | |
| return true; | |
| else | |
| return false; | |
| } | |
| static bool intel_sdvo_get_hw_state(struct intel_encoder *encoder, | |
| enum pipe *pipe) | |
| { | |
| struct drm_device *dev = encoder->base.dev; | |
| struct drm_i915_private *dev_priv = to_i915(dev); | |
| struct intel_sdvo *intel_sdvo = to_sdvo(encoder); | |
| u16 active_outputs = 0; | |
| u32 tmp; | |
| tmp = I915_READ(intel_sdvo->sdvo_reg); | |
| intel_sdvo_get_active_outputs(intel_sdvo, &active_outputs); | |
| if (!(tmp & SDVO_ENABLE) && (active_outputs == 0)) | |
| return false; | |
| if (HAS_PCH_CPT(dev_priv)) | |
| *pipe = PORT_TO_PIPE_CPT(tmp); | |
| else | |
| *pipe = PORT_TO_PIPE(tmp); | |
| return true; | |
| } | |
| static void intel_sdvo_get_config(struct intel_encoder *encoder, | |
| struct intel_crtc_state *pipe_config) | |
| { | |
| struct drm_device *dev = encoder->base.dev; | |
| struct drm_i915_private *dev_priv = to_i915(dev); | |
| struct intel_sdvo *intel_sdvo = to_sdvo(encoder); | |
| struct intel_sdvo_dtd dtd; | |
| int encoder_pixel_multiplier = 0; | |
| int dotclock; | |
| u32 flags = 0, sdvox; | |
| u8 val; | |
| bool ret; | |
| sdvox = I915_READ(intel_sdvo->sdvo_reg); | |
| ret = intel_sdvo_get_input_timing(intel_sdvo, &dtd); | |
| if (!ret) { | |
| /* Some sdvo encoders are not spec compliant and don't | |
| * implement the mandatory get_timings function. */ | |
| DRM_DEBUG_DRIVER("failed to retrieve SDVO DTD\n"); | |
| pipe_config->quirks |= PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS; | |
| } else { | |
| if (dtd.part2.dtd_flags & DTD_FLAG_HSYNC_POSITIVE) | |
| flags |= DRM_MODE_FLAG_PHSYNC; | |
| else | |
| flags |= DRM_MODE_FLAG_NHSYNC; | |
| if (dtd.part2.dtd_flags & DTD_FLAG_VSYNC_POSITIVE) | |
| flags |= DRM_MODE_FLAG_PVSYNC; | |
| else | |
| flags |= DRM_MODE_FLAG_NVSYNC; | |
| } | |
| pipe_config->base.adjusted_mode.flags |= flags; | |
| /* | |
| * pixel multiplier readout is tricky: Only on i915g/gm it is stored in | |
| * the sdvo port register, on all other platforms it is part of the dpll | |
| * state. Since the general pipe state readout happens before the | |
| * encoder->get_config we so already have a valid pixel multplier on all | |
| * other platfroms. | |
| */ | |
| if (IS_I915G(dev_priv) || IS_I915GM(dev_priv)) { | |
| pipe_config->pixel_multiplier = | |
| ((sdvox & SDVO_PORT_MULTIPLY_MASK) | |
| >> SDVO_PORT_MULTIPLY_SHIFT) + 1; | |
| } | |
| dotclock = pipe_config->port_clock; | |
| if (pipe_config->pixel_multiplier) | |
| dotclock /= pipe_config->pixel_multiplier; | |
| pipe_config->base.adjusted_mode.crtc_clock = dotclock; | |
| /* Cross check the port pixel multiplier with the sdvo encoder state. */ | |
| if (intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_CLOCK_RATE_MULT, | |
| &val, 1)) { | |
| switch (val) { | |
| case SDVO_CLOCK_RATE_MULT_1X: | |
| encoder_pixel_multiplier = 1; | |
| break; | |
| case SDVO_CLOCK_RATE_MULT_2X: | |
| encoder_pixel_multiplier = 2; | |
| break; | |
| case SDVO_CLOCK_RATE_MULT_4X: | |
| encoder_pixel_multiplier = 4; | |
| break; | |
| } | |
| } | |
| if (sdvox & HDMI_COLOR_RANGE_16_235) | |
| pipe_config->limited_color_range = true; | |
| if (sdvox & SDVO_AUDIO_ENABLE) | |
| pipe_config->has_audio = true; | |
| if (intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ENCODE, | |
| &val, 1)) { | |
| if (val == SDVO_ENCODE_HDMI) | |
| pipe_config->has_hdmi_sink = true; | |
| } | |
| WARN(encoder_pixel_multiplier != pipe_config->pixel_multiplier, | |
| "SDVO pixel multiplier mismatch, port: %i, encoder: %i\n", | |
| pipe_config->pixel_multiplier, encoder_pixel_multiplier); | |
| } | |
| static void intel_disable_sdvo(struct intel_encoder *encoder, | |
| struct intel_crtc_state *old_crtc_state, | |
| struct drm_connector_state *conn_state) | |
| { | |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); | |
| struct intel_sdvo *intel_sdvo = to_sdvo(encoder); | |
| struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc); | |
| u32 temp; | |
| intel_sdvo_set_active_outputs(intel_sdvo, 0); | |
| if (0) | |
| intel_sdvo_set_encoder_power_state(intel_sdvo, | |
| DRM_MODE_DPMS_OFF); | |
| temp = I915_READ(intel_sdvo->sdvo_reg); | |
| temp &= ~SDVO_ENABLE; | |
| intel_sdvo_write_sdvox(intel_sdvo, temp); | |
| /* | |
| * HW workaround for IBX, we need to move the port | |
| * to transcoder A after disabling it to allow the | |
| * matching DP port to be enabled on transcoder A. | |
| */ | |
| if (HAS_PCH_IBX(dev_priv) && crtc->pipe == PIPE_B) { | |
| /* | |
| * We get CPU/PCH FIFO underruns on the other pipe when | |
| * doing the workaround. Sweep them under the rug. | |
| */ | |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, PIPE_A, false); | |
| intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false); | |
| temp &= ~SDVO_PIPE_B_SELECT; | |
| temp |= SDVO_ENABLE; | |
| intel_sdvo_write_sdvox(intel_sdvo, temp); | |
| temp &= ~SDVO_ENABLE; | |
| intel_sdvo_write_sdvox(intel_sdvo, temp); | |
| intel_wait_for_vblank_if_active(dev_priv, PIPE_A); | |
| intel_set_cpu_fifo_underrun_reporting(dev_priv, PIPE_A, true); | |
| intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, true); | |
| } | |
| } | |
| static void pch_disable_sdvo(struct intel_encoder *encoder, | |
| struct intel_crtc_state *old_crtc_state, | |
| struct drm_connector_state *old_conn_state) | |
| { | |
| } | |
| static void pch_post_disable_sdvo(struct intel_encoder *encoder, | |
| struct intel_crtc_state *old_crtc_state, | |
| struct drm_connector_state *old_conn_state) | |
| { | |
| intel_disable_sdvo(encoder, old_crtc_state, old_conn_state); | |
| } | |
| static void intel_enable_sdvo(struct intel_encoder *encoder, | |
| struct intel_crtc_state *pipe_config, | |
| struct drm_connector_state *conn_state) | |
| { | |
| struct drm_device *dev = encoder->base.dev; | |
| struct drm_i915_private *dev_priv = to_i915(dev); | |
| struct intel_sdvo *intel_sdvo = to_sdvo(encoder); | |
| struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); | |
| u32 temp; | |
| bool input1, input2; | |
| int i; | |
| bool success; | |
| temp = I915_READ(intel_sdvo->sdvo_reg); | |
| temp |= SDVO_ENABLE; | |
| intel_sdvo_write_sdvox(intel_sdvo, temp); | |
| for (i = 0; i < 2; i++) | |
| intel_wait_for_vblank(dev_priv, intel_crtc->pipe); | |
| success = intel_sdvo_get_trained_inputs(intel_sdvo, &input1, &input2); | |
| /* Warn if the device reported failure to sync. | |
| * A lot of SDVO devices fail to notify of sync, but it's | |
| * a given it the status is a success, we succeeded. | |
| */ | |
| if (success && !input1) { | |
| DRM_DEBUG_KMS("First %s output reported failure to " | |
| "sync\n", SDVO_NAME(intel_sdvo)); | |
| } | |
| if (0) | |
| intel_sdvo_set_encoder_power_state(intel_sdvo, | |
| DRM_MODE_DPMS_ON); | |
| intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output); | |
| } | |
| static enum drm_mode_status | |
| intel_sdvo_mode_valid(struct drm_connector *connector, | |
| struct drm_display_mode *mode) | |
| { | |
| struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector); | |
| int max_dotclk = to_i915(connector->dev)->max_dotclk_freq; | |
| if (mode->flags & DRM_MODE_FLAG_DBLSCAN) | |
| return MODE_NO_DBLESCAN; | |
| if (intel_sdvo->pixel_clock_min > mode->clock) | |
| return MODE_CLOCK_LOW; | |
| if (intel_sdvo->pixel_clock_max < mode->clock) | |
| return MODE_CLOCK_HIGH; | |
| if (mode->clock > max_dotclk) | |
| return MODE_CLOCK_HIGH; | |
| if (intel_sdvo->is_lvds) { | |
| if (mode->hdisplay > intel_sdvo->sdvo_lvds_fixed_mode->hdisplay) | |
| return MODE_PANEL; | |
| if (mode->vdisplay > intel_sdvo->sdvo_lvds_fixed_mode->vdisplay) | |
| return MODE_PANEL; | |
| } | |
| return MODE_OK; | |
| } | |
| static bool intel_sdvo_get_capabilities(struct intel_sdvo *intel_sdvo, struct intel_sdvo_caps *caps) | |
| { | |
| BUILD_BUG_ON(sizeof(*caps) != 8); | |
| if (!intel_sdvo_get_value(intel_sdvo, | |
| SDVO_CMD_GET_DEVICE_CAPS, | |
| caps, sizeof(*caps))) | |
| return false; | |
| DRM_DEBUG_KMS("SDVO capabilities:\n" | |
| " vendor_id: %d\n" | |
| " device_id: %d\n" | |
| " device_rev_id: %d\n" | |
| " sdvo_version_major: %d\n" | |
| " sdvo_version_minor: %d\n" | |
| " sdvo_inputs_mask: %d\n" | |
| " smooth_scaling: %d\n" | |
| " sharp_scaling: %d\n" | |
| " up_scaling: %d\n" | |
| " down_scaling: %d\n" | |
| " stall_support: %d\n" | |
| " output_flags: %d\n", | |
| caps->vendor_id, | |
| caps->device_id, | |
| caps->device_rev_id, | |
| caps->sdvo_version_major, | |
| caps->sdvo_version_minor, | |
| caps->sdvo_inputs_mask, | |
| caps->smooth_scaling, | |
| caps->sharp_scaling, | |
| caps->up_scaling, | |
| caps->down_scaling, | |
| caps->stall_support, | |
| caps->output_flags); | |
| return true; | |
| } | |
| static uint16_t intel_sdvo_get_hotplug_support(struct intel_sdvo *intel_sdvo) | |
| { | |
| struct drm_i915_private *dev_priv = to_i915(intel_sdvo->base.base.dev); | |
| uint16_t hotplug; | |
| if (!I915_HAS_HOTPLUG(dev_priv)) | |
| return 0; | |
| /* HW Erratum: SDVO Hotplug is broken on all i945G chips, there's noise | |
| * on the line. */ | |
| if (IS_I945G(dev_priv) || IS_I945GM(dev_priv)) | |
| return 0; | |
| if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT, | |
| &hotplug, sizeof(hotplug))) | |
| return 0; | |
| return hotplug; | |
| } | |
| static void intel_sdvo_enable_hotplug(struct intel_encoder *encoder) | |
| { | |
| struct intel_sdvo *intel_sdvo = to_sdvo(encoder); | |
| intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, | |
| &intel_sdvo->hotplug_active, 2); | |
| } | |
| static bool | |
| intel_sdvo_multifunc_encoder(struct intel_sdvo *intel_sdvo) | |
| { | |
| /* Is there more than one type of output? */ | |
| return hweight16(intel_sdvo->caps.output_flags) > 1; | |
| } | |
| static struct edid * | |
| intel_sdvo_get_edid(struct drm_connector *connector) | |
| { | |
| struct intel_sdvo *sdvo = intel_attached_sdvo(connector); | |
| return drm_get_edid(connector, &sdvo->ddc); | |
| } | |
| /* Mac mini hack -- use the same DDC as the analog connector */ | |
| static struct edid * | |
| intel_sdvo_get_analog_edid(struct drm_connector *connector) | |
| { | |
| struct drm_i915_private *dev_priv = to_i915(connector->dev); | |
| return drm_get_edid(connector, | |
| intel_gmbus_get_adapter(dev_priv, | |
| dev_priv->vbt.crt_ddc_pin)); | |
| } | |
| static enum drm_connector_status | |
| intel_sdvo_tmds_sink_detect(struct drm_connector *connector) | |
| { | |
| struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector); | |
| enum drm_connector_status status; | |
| struct edid *edid; | |
| edid = intel_sdvo_get_edid(connector); | |
| if (edid == NULL && intel_sdvo_multifunc_encoder(intel_sdvo)) { | |
| u8 ddc, saved_ddc = intel_sdvo->ddc_bus; | |
| /* | |
| * Don't use the 1 as the argument of DDC bus switch to get | |
| * the EDID. It is used for SDVO SPD ROM. | |
| */ | |
| for (ddc = intel_sdvo->ddc_bus >> 1; ddc > 1; ddc >>= 1) { | |
| intel_sdvo->ddc_bus = ddc; | |
| edid = intel_sdvo_get_edid(connector); | |
| if (edid) | |
| break; | |
| } | |
| /* | |
| * If we found the EDID on the other bus, | |
| * assume that is the correct DDC bus. | |
| */ | |
| if (edid == NULL) | |
| intel_sdvo->ddc_bus = saved_ddc; | |
| } | |
| /* | |
| * When there is no edid and no monitor is connected with VGA | |
| * port, try to use the CRT ddc to read the EDID for DVI-connector. | |
| */ | |
| if (edid == NULL) | |
| edid = intel_sdvo_get_analog_edid(connector); | |
| status = connector_status_unknown; | |
| if (edid != NULL) { | |
| /* DDC bus is shared, match EDID to connector type */ | |
| if (edid->input & DRM_EDID_INPUT_DIGITAL) { | |
| status = connector_status_connected; | |
| if (intel_sdvo->is_hdmi) { | |
| intel_sdvo->has_hdmi_monitor = drm_detect_hdmi_monitor(edid); | |
| intel_sdvo->has_hdmi_audio = drm_detect_monitor_audio(edid); | |
| intel_sdvo->rgb_quant_range_selectable = | |
| drm_rgb_quant_range_selectable(edid); | |
| } | |
| } else | |
| status = connector_status_disconnected; | |
| kfree(edid); | |
| } | |
| return status; | |
| } | |
| static bool | |
| intel_sdvo_connector_matches_edid(struct intel_sdvo_connector *sdvo, | |
| struct edid *edid) | |
| { | |
| bool monitor_is_digital = !!(edid->input & DRM_EDID_INPUT_DIGITAL); | |
| bool connector_is_digital = !!IS_DIGITAL(sdvo); | |
| DRM_DEBUG_KMS("connector_is_digital? %d, monitor_is_digital? %d\n", | |
| connector_is_digital, monitor_is_digital); | |
| return connector_is_digital == monitor_is_digital; | |
| } | |
| static enum drm_connector_status | |
| intel_sdvo_detect(struct drm_connector *connector, bool force) | |
| { | |
| uint16_t response; | |
| struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector); | |
| struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector); | |
| enum drm_connector_status ret; | |
| DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", | |
| connector->base.id, connector->name); | |
| if (!intel_sdvo_get_value(intel_sdvo, | |
| SDVO_CMD_GET_ATTACHED_DISPLAYS, | |
| &response, 2)) | |
| return connector_status_unknown; | |
| DRM_DEBUG_KMS("SDVO response %d %d [%x]\n", | |
| response & 0xff, response >> 8, | |
| intel_sdvo_connector->output_flag); | |
| if (response == 0) | |
| return connector_status_disconnected; | |
| intel_sdvo->attached_output = response; | |
| intel_sdvo->has_hdmi_monitor = false; | |
| intel_sdvo->has_hdmi_audio = false; | |
| intel_sdvo->rgb_quant_range_selectable = false; | |
| if ((intel_sdvo_connector->output_flag & response) == 0) | |
| ret = connector_status_disconnected; | |
| else if (IS_TMDS(intel_sdvo_connector)) | |
| ret = intel_sdvo_tmds_sink_detect(connector); | |
| else { | |
| struct edid *edid; | |
| /* if we have an edid check it matches the connection */ | |
| edid = intel_sdvo_get_edid(connector); | |
| if (edid == NULL) | |
| edid = intel_sdvo_get_analog_edid(connector); | |
| if (edid != NULL) { | |
| if (intel_sdvo_connector_matches_edid(intel_sdvo_connector, | |
| edid)) | |
| ret = connector_status_connected; | |
| else | |
| ret = connector_status_disconnected; | |
| kfree(edid); | |
| } else | |
| ret = connector_status_connected; | |
| } | |
| /* May update encoder flag for like clock for SDVO TV, etc.*/ | |
| if (ret == connector_status_connected) { | |
| intel_sdvo->is_tv = false; | |
| intel_sdvo->is_lvds = false; | |
| if (response & SDVO_TV_MASK) | |
| intel_sdvo->is_tv = true; | |
| if (response & SDVO_LVDS_MASK) | |
| intel_sdvo->is_lvds = intel_sdvo->sdvo_lvds_fixed_mode != NULL; | |
| } | |
| return ret; | |
| } | |
| static void intel_sdvo_get_ddc_modes(struct drm_connector *connector) | |
| { | |
| struct edid *edid; | |
| DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", | |
| connector->base.id, connector->name); | |
| /* set the bus switch and get the modes */ | |
| edid = intel_sdvo_get_edid(connector); | |
| /* | |
| * Mac mini hack. On this device, the DVI-I connector shares one DDC | |
| * link between analog and digital outputs. So, if the regular SDVO | |
| * DDC fails, check to see if the analog output is disconnected, in | |
| * which case we'll look there for the digital DDC data. | |
| */ | |
| if (edid == NULL) | |
| edid = intel_sdvo_get_analog_edid(connector); | |
| if (edid != NULL) { | |
| if (intel_sdvo_connector_matches_edid(to_intel_sdvo_connector(connector), | |
| edid)) { | |
| drm_mode_connector_update_edid_property(connector, edid); | |
| drm_add_edid_modes(connector, edid); | |
| } | |
| kfree(edid); | |
| } | |
| } | |
| /* | |
| * Set of SDVO TV modes. | |
| * Note! This is in reply order (see loop in get_tv_modes). | |
| * XXX: all 60Hz refresh? | |
| */ | |
| static const struct drm_display_mode sdvo_tv_modes[] = { | |
| { DRM_MODE("320x200", DRM_MODE_TYPE_DRIVER, 5815, 320, 321, 384, | |
| 416, 0, 200, 201, 232, 233, 0, | |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | |
| { DRM_MODE("320x240", DRM_MODE_TYPE_DRIVER, 6814, 320, 321, 384, | |
| 416, 0, 240, 241, 272, 273, 0, | |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | |
| { DRM_MODE("400x300", DRM_MODE_TYPE_DRIVER, 9910, 400, 401, 464, | |
| 496, 0, 300, 301, 332, 333, 0, | |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | |
| { DRM_MODE("640x350", DRM_MODE_TYPE_DRIVER, 16913, 640, 641, 704, | |
| 736, 0, 350, 351, 382, 383, 0, | |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | |
| { DRM_MODE("640x400", DRM_MODE_TYPE_DRIVER, 19121, 640, 641, 704, | |
| 736, 0, 400, 401, 432, 433, 0, | |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | |
| { DRM_MODE("640x480", DRM_MODE_TYPE_DRIVER, 22654, 640, 641, 704, | |
| 736, 0, 480, 481, 512, 513, 0, | |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | |
| { DRM_MODE("704x480", DRM_MODE_TYPE_DRIVER, 24624, 704, 705, 768, | |
| 800, 0, 480, 481, 512, 513, 0, | |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | |
| { DRM_MODE("704x576", DRM_MODE_TYPE_DRIVER, 29232, 704, 705, 768, | |
| 800, 0, 576, 577, 608, 609, 0, | |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | |
| { DRM_MODE("720x350", DRM_MODE_TYPE_DRIVER, 18751, 720, 721, 784, | |
| 816, 0, 350, 351, 382, 383, 0, | |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | |
| { DRM_MODE("720x400", DRM_MODE_TYPE_DRIVER, 21199, 720, 721, 784, | |
| 816, 0, 400, 401, 432, 433, 0, | |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | |
| { DRM_MODE("720x480", DRM_MODE_TYPE_DRIVER, 25116, 720, 721, 784, | |
| 816, 0, 480, 481, 512, 513, 0, | |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | |
| { DRM_MODE("720x540", DRM_MODE_TYPE_DRIVER, 28054, 720, 721, 784, | |
| 816, 0, 540, 541, 572, 573, 0, | |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | |
| { DRM_MODE("720x576", DRM_MODE_TYPE_DRIVER, 29816, 720, 721, 784, | |
| 816, 0, 576, 577, 608, 609, 0, | |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | |
| { DRM_MODE("768x576", DRM_MODE_TYPE_DRIVER, 31570, 768, 769, 832, | |
| 864, 0, 576, 577, 608, 609, 0, | |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | |
| { DRM_MODE("800x600", DRM_MODE_TYPE_DRIVER, 34030, 800, 801, 864, | |
| 896, 0, 600, 601, 632, 633, 0, | |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | |
| { DRM_MODE("832x624", DRM_MODE_TYPE_DRIVER, 36581, 832, 833, 896, | |
| 928, 0, 624, 625, 656, 657, 0, | |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | |
| { DRM_MODE("920x766", DRM_MODE_TYPE_DRIVER, 48707, 920, 921, 984, | |
| 1016, 0, 766, 767, 798, 799, 0, | |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | |
| { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 53827, 1024, 1025, 1088, | |
| 1120, 0, 768, 769, 800, 801, 0, | |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | |
| { DRM_MODE("1280x1024", DRM_MODE_TYPE_DRIVER, 87265, 1280, 1281, 1344, | |
| 1376, 0, 1024, 1025, 1056, 1057, 0, | |
| DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC) }, | |
| }; | |
| static void intel_sdvo_get_tv_modes(struct drm_connector *connector) | |
| { | |
| struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector); | |
| const struct drm_connector_state *conn_state = connector->state; | |
| struct intel_sdvo_sdtv_resolution_request tv_res; | |
| uint32_t reply = 0, format_map = 0; | |
| int i; | |
| DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", | |
| connector->base.id, connector->name); | |
| /* Read the list of supported input resolutions for the selected TV | |
| * format. | |
| */ | |
| format_map = 1 << conn_state->tv.mode; | |
| memcpy(&tv_res, &format_map, | |
| min(sizeof(format_map), sizeof(struct intel_sdvo_sdtv_resolution_request))); | |
| if (!intel_sdvo_set_target_output(intel_sdvo, intel_sdvo->attached_output)) | |
| return; | |
| BUILD_BUG_ON(sizeof(tv_res) != 3); | |
| if (!intel_sdvo_write_cmd(intel_sdvo, | |
| SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT, | |
| &tv_res, sizeof(tv_res))) | |
| return; | |
| if (!intel_sdvo_read_response(intel_sdvo, &reply, 3)) | |
| return; | |
| for (i = 0; i < ARRAY_SIZE(sdvo_tv_modes); i++) | |
| if (reply & (1 << i)) { | |
| struct drm_display_mode *nmode; | |
| nmode = drm_mode_duplicate(connector->dev, | |
| &sdvo_tv_modes[i]); | |
| if (nmode) | |
| drm_mode_probed_add(connector, nmode); | |
| } | |
| } | |
| static void intel_sdvo_get_lvds_modes(struct drm_connector *connector) | |
| { | |
| struct intel_sdvo *intel_sdvo = intel_attached_sdvo(connector); | |
| struct drm_i915_private *dev_priv = to_i915(connector->dev); | |
| struct drm_display_mode *newmode; | |
| DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", | |
| connector->base.id, connector->name); | |
| /* | |
| * Fetch modes from VBT. For SDVO prefer the VBT mode since some | |
| * SDVO->LVDS transcoders can't cope with the EDID mode. | |
| */ | |
| if (dev_priv->vbt.sdvo_lvds_vbt_mode != NULL) { | |
| newmode = drm_mode_duplicate(connector->dev, | |
| dev_priv->vbt.sdvo_lvds_vbt_mode); | |
| if (newmode != NULL) { | |
| /* Guarantee the mode is preferred */ | |
| newmode->type = (DRM_MODE_TYPE_PREFERRED | | |
| DRM_MODE_TYPE_DRIVER); | |
| drm_mode_probed_add(connector, newmode); | |
| } | |
| } | |
| /* | |
| * Attempt to get the mode list from DDC. | |
| * Assume that the preferred modes are | |
| * arranged in priority order. | |
| */ | |
| intel_ddc_get_modes(connector, &intel_sdvo->ddc); | |
| list_for_each_entry(newmode, &connector->probed_modes, head) { | |
| if (newmode->type & DRM_MODE_TYPE_PREFERRED) { | |
| intel_sdvo->sdvo_lvds_fixed_mode = | |
| drm_mode_duplicate(connector->dev, newmode); | |
| intel_sdvo->is_lvds = true; | |
| break; | |
| } | |
| } | |
| } | |
| static int intel_sdvo_get_modes(struct drm_connector *connector) | |
| { | |
| struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector); | |
| if (IS_TV(intel_sdvo_connector)) | |
| intel_sdvo_get_tv_modes(connector); | |
| else if (IS_LVDS(intel_sdvo_connector)) | |
| intel_sdvo_get_lvds_modes(connector); | |
| else | |
| intel_sdvo_get_ddc_modes(connector); | |
| return !list_empty(&connector->probed_modes); | |
| } | |
| static void intel_sdvo_destroy(struct drm_connector *connector) | |
| { | |
| struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector); | |
| drm_connector_cleanup(connector); | |
| kfree(intel_sdvo_connector); | |
| } | |
| static int | |
| intel_sdvo_connector_atomic_get_property(struct drm_connector *connector, | |
| const struct drm_connector_state *state, | |
| struct drm_property *property, | |
| uint64_t *val) | |
| { | |
| struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector); | |
| const struct intel_sdvo_connector_state *sdvo_state = to_intel_sdvo_connector_state((void *)state); | |
| if (property == intel_sdvo_connector->tv_format) { | |
| int i; | |
| for (i = 0; i < intel_sdvo_connector->format_supported_num; i++) | |
| if (state->tv.mode == intel_sdvo_connector->tv_format_supported[i]) { | |
| *val = i; | |
| return 0; | |
| } | |
| WARN_ON(1); | |
| *val = 0; | |
| } else if (property == intel_sdvo_connector->top || | |
| property == intel_sdvo_connector->bottom) | |
| *val = intel_sdvo_connector->max_vscan - sdvo_state->tv.overscan_v; | |
| else if (property == intel_sdvo_connector->left || | |
| property == intel_sdvo_connector->right) | |
| *val = intel_sdvo_connector->max_hscan - sdvo_state->tv.overscan_h; | |
| else if (property == intel_sdvo_connector->hpos) | |
| *val = sdvo_state->tv.hpos; | |
| else if (property == intel_sdvo_connector->vpos) | |
| *val = sdvo_state->tv.vpos; | |
| else if (property == intel_sdvo_connector->saturation) | |
| *val = state->tv.saturation; | |
| else if (property == intel_sdvo_connector->contrast) | |
| *val = state->tv.contrast; | |
| else if (property == intel_sdvo_connector->hue) | |
| *val = state->tv.hue; | |
| else if (property == intel_sdvo_connector->brightness) | |
| *val = state->tv.brightness; | |
| else if (property == intel_sdvo_connector->sharpness) | |
| *val = sdvo_state->tv.sharpness; | |
| else if (property == intel_sdvo_connector->flicker_filter) | |
| *val = sdvo_state->tv.flicker_filter; | |
| else if (property == intel_sdvo_connector->flicker_filter_2d) | |
| *val = sdvo_state->tv.flicker_filter_2d; | |
| else if (property == intel_sdvo_connector->flicker_filter_adaptive) | |
| *val = sdvo_state->tv.flicker_filter_adaptive; | |
| else if (property == intel_sdvo_connector->tv_chroma_filter) | |
| *val = sdvo_state->tv.chroma_filter; | |
| else if (property == intel_sdvo_connector->tv_luma_filter) | |
| *val = sdvo_state->tv.luma_filter; | |
| else if (property == intel_sdvo_connector->dot_crawl) | |
| *val = sdvo_state->tv.dot_crawl; | |
| else | |
| return intel_digital_connector_atomic_get_property(connector, state, property, val); | |
| return 0; | |
| } | |
| static int | |
| intel_sdvo_connector_atomic_set_property(struct drm_connector *connector, | |
| struct drm_connector_state *state, | |
| struct drm_property *property, | |
| uint64_t val) | |
| { | |
| struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector); | |
| struct intel_sdvo_connector_state *sdvo_state = to_intel_sdvo_connector_state(state); | |
| if (property == intel_sdvo_connector->tv_format) { | |
| state->tv.mode = intel_sdvo_connector->tv_format_supported[val]; | |
| if (state->crtc) { | |
| struct drm_crtc_state *crtc_state = | |
| drm_atomic_get_new_crtc_state(state->state, state->crtc); | |
| crtc_state->connectors_changed = true; | |
| } | |
| } else if (property == intel_sdvo_connector->top || | |
| property == intel_sdvo_connector->bottom) | |
| /* Cannot set these independent from each other */ | |
| sdvo_state->tv.overscan_v = intel_sdvo_connector->max_vscan - val; | |
| else if (property == intel_sdvo_connector->left || | |
| property == intel_sdvo_connector->right) | |
| /* Cannot set these independent from each other */ | |
| sdvo_state->tv.overscan_h = intel_sdvo_connector->max_hscan - val; | |
| else if (property == intel_sdvo_connector->hpos) | |
| sdvo_state->tv.hpos = val; | |
| else if (property == intel_sdvo_connector->vpos) | |
| sdvo_state->tv.vpos = val; | |
| else if (property == intel_sdvo_connector->saturation) | |
| state->tv.saturation = val; | |
| else if (property == intel_sdvo_connector->contrast) | |
| state->tv.contrast = val; | |
| else if (property == intel_sdvo_connector->hue) | |
| state->tv.hue = val; | |
| else if (property == intel_sdvo_connector->brightness) | |
| state->tv.brightness = val; | |
| else if (property == intel_sdvo_connector->sharpness) | |
| sdvo_state->tv.sharpness = val; | |
| else if (property == intel_sdvo_connector->flicker_filter) | |
| sdvo_state->tv.flicker_filter = val; | |
| else if (property == intel_sdvo_connector->flicker_filter_2d) | |
| sdvo_state->tv.flicker_filter_2d = val; | |
| else if (property == intel_sdvo_connector->flicker_filter_adaptive) | |
| sdvo_state->tv.flicker_filter_adaptive = val; | |
| else if (property == intel_sdvo_connector->tv_chroma_filter) | |
| sdvo_state->tv.chroma_filter = val; | |
| else if (property == intel_sdvo_connector->tv_luma_filter) | |
| sdvo_state->tv.luma_filter = val; | |
| else if (property == intel_sdvo_connector->dot_crawl) | |
| sdvo_state->tv.dot_crawl = val; | |
| else | |
| return intel_digital_connector_atomic_set_property(connector, state, property, val); | |
| return 0; | |
| } | |
| static int | |
| intel_sdvo_connector_register(struct drm_connector *connector) | |
| { | |
| struct intel_sdvo *sdvo = intel_attached_sdvo(connector); | |
| int ret; | |
| ret = intel_connector_register(connector); | |
| if (ret) | |
| return ret; | |
| return sysfs_create_link(&connector->kdev->kobj, | |
| &sdvo->ddc.dev.kobj, | |
| sdvo->ddc.dev.kobj.name); | |
| } | |
| static void | |
| intel_sdvo_connector_unregister(struct drm_connector *connector) | |
| { | |
| struct intel_sdvo *sdvo = intel_attached_sdvo(connector); | |
| sysfs_remove_link(&connector->kdev->kobj, | |
| sdvo->ddc.dev.kobj.name); | |
| intel_connector_unregister(connector); | |
| } | |
| static struct drm_connector_state * | |
| intel_sdvo_connector_duplicate_state(struct drm_connector *connector) | |
| { | |
| struct intel_sdvo_connector_state *state; | |
| state = kmemdup(connector->state, sizeof(*state), GFP_KERNEL); | |
| if (!state) | |
| return NULL; | |
| __drm_atomic_helper_connector_duplicate_state(connector, &state->base.base); | |
| return &state->base.base; | |
| } | |
| static const struct drm_connector_funcs intel_sdvo_connector_funcs = { | |
| .detect = intel_sdvo_detect, | |
| .fill_modes = drm_helper_probe_single_connector_modes, | |
| .atomic_get_property = intel_sdvo_connector_atomic_get_property, | |
| .atomic_set_property = intel_sdvo_connector_atomic_set_property, | |
| .late_register = intel_sdvo_connector_register, | |
| .early_unregister = intel_sdvo_connector_unregister, | |
| .destroy = intel_sdvo_destroy, | |
| .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, | |
| .atomic_duplicate_state = intel_sdvo_connector_duplicate_state, | |
| }; | |
| static int intel_sdvo_atomic_check(struct drm_connector *conn, | |
| struct drm_connector_state *new_conn_state) | |
| { | |
| struct drm_atomic_state *state = new_conn_state->state; | |
| struct drm_connector_state *old_conn_state = | |
| drm_atomic_get_old_connector_state(state, conn); | |
| struct intel_sdvo_connector_state *old_state = | |
| to_intel_sdvo_connector_state(old_conn_state); | |
| struct intel_sdvo_connector_state *new_state = | |
| to_intel_sdvo_connector_state(new_conn_state); | |
| if (new_conn_state->crtc && | |
| (memcmp(&old_state->tv, &new_state->tv, sizeof(old_state->tv)) || | |
| memcmp(&old_conn_state->tv, &new_conn_state->tv, sizeof(old_conn_state->tv)))) { | |
| struct drm_crtc_state *crtc_state = | |
| drm_atomic_get_new_crtc_state(new_conn_state->state, | |
| new_conn_state->crtc); | |
| crtc_state->connectors_changed = true; | |
| } | |
| return intel_digital_connector_atomic_check(conn, new_conn_state); | |
| } | |
| static const struct drm_connector_helper_funcs intel_sdvo_connector_helper_funcs = { | |
| .get_modes = intel_sdvo_get_modes, | |
| .mode_valid = intel_sdvo_mode_valid, | |
| .atomic_check = intel_sdvo_atomic_check, | |
| }; | |
| static void intel_sdvo_enc_destroy(struct drm_encoder *encoder) | |
| { | |
| struct intel_sdvo *intel_sdvo = to_sdvo(to_intel_encoder(encoder)); | |
| if (intel_sdvo->sdvo_lvds_fixed_mode != NULL) | |
| drm_mode_destroy(encoder->dev, | |
| intel_sdvo->sdvo_lvds_fixed_mode); | |
| i2c_del_adapter(&intel_sdvo->ddc); | |
| intel_encoder_destroy(encoder); | |
| } | |
| static const struct drm_encoder_funcs intel_sdvo_enc_funcs = { | |
| .destroy = intel_sdvo_enc_destroy, | |
| }; | |
| static void | |
| intel_sdvo_guess_ddc_bus(struct intel_sdvo *sdvo) | |
| { | |
| uint16_t mask = 0; | |
| unsigned int num_bits; | |
| /* Make a mask of outputs less than or equal to our own priority in the | |
| * list. | |
| */ | |
| switch (sdvo->controlled_output) { | |
| case SDVO_OUTPUT_LVDS1: | |
| mask |= SDVO_OUTPUT_LVDS1; | |
| case SDVO_OUTPUT_LVDS0: | |
| mask |= SDVO_OUTPUT_LVDS0; | |
| case SDVO_OUTPUT_TMDS1: | |
| mask |= SDVO_OUTPUT_TMDS1; | |
| case SDVO_OUTPUT_TMDS0: | |
| mask |= SDVO_OUTPUT_TMDS0; | |
| case SDVO_OUTPUT_RGB1: | |
| mask |= SDVO_OUTPUT_RGB1; | |
| case SDVO_OUTPUT_RGB0: | |
| mask |= SDVO_OUTPUT_RGB0; | |
| break; | |
| } | |
| /* Count bits to find what number we are in the priority list. */ | |
| mask &= sdvo->caps.output_flags; | |
| num_bits = hweight16(mask); | |
| /* If more than 3 outputs, default to DDC bus 3 for now. */ | |
| if (num_bits > 3) | |
| num_bits = 3; | |
| /* Corresponds to SDVO_CONTROL_BUS_DDCx */ | |
| sdvo->ddc_bus = 1 << num_bits; | |
| } | |
| /** | |
| * Choose the appropriate DDC bus for control bus switch command for this | |
| * SDVO output based on the controlled output. | |
| * | |
| * DDC bus number assignment is in a priority order of RGB outputs, then TMDS | |
| * outputs, then LVDS outputs. | |
| */ | |
| static void | |
| intel_sdvo_select_ddc_bus(struct drm_i915_private *dev_priv, | |
| struct intel_sdvo *sdvo) | |
| { | |
| struct sdvo_device_mapping *mapping; | |
| if (sdvo->port == PORT_B) | |
| mapping = &dev_priv->vbt.sdvo_mappings[0]; | |
| else | |
| mapping = &dev_priv->vbt.sdvo_mappings[1]; | |
| if (mapping->initialized) | |
| sdvo->ddc_bus = 1 << ((mapping->ddc_pin & 0xf0) >> 4); | |
| else | |
| intel_sdvo_guess_ddc_bus(sdvo); | |
| } | |
| static void | |
| intel_sdvo_select_i2c_bus(struct drm_i915_private *dev_priv, | |
| struct intel_sdvo *sdvo) | |
| { | |
| struct sdvo_device_mapping *mapping; | |
| u8 pin; | |
| if (sdvo->port == PORT_B) | |
| mapping = &dev_priv->vbt.sdvo_mappings[0]; | |
| else | |
| mapping = &dev_priv->vbt.sdvo_mappings[1]; | |
| if (mapping->initialized && | |
| intel_gmbus_is_valid_pin(dev_priv, mapping->i2c_pin)) | |
| pin = mapping->i2c_pin; | |
| else | |
| pin = GMBUS_PIN_DPB; | |
| sdvo->i2c = intel_gmbus_get_adapter(dev_priv, pin); | |
| /* With gmbus we should be able to drive sdvo i2c at 2MHz, but somehow | |
| * our code totally fails once we start using gmbus. Hence fall back to | |
| * bit banging for now. */ | |
| intel_gmbus_force_bit(sdvo->i2c, true); | |
| } | |
| /* undo any changes intel_sdvo_select_i2c_bus() did to sdvo->i2c */ | |
| static void | |
| intel_sdvo_unselect_i2c_bus(struct intel_sdvo *sdvo) | |
| { | |
| intel_gmbus_force_bit(sdvo->i2c, false); | |
| } | |
| static bool | |
| intel_sdvo_is_hdmi_connector(struct intel_sdvo *intel_sdvo, int device) | |
| { | |
| return intel_sdvo_check_supp_encode(intel_sdvo); | |
| } | |
| static u8 | |
| intel_sdvo_get_slave_addr(struct drm_i915_private *dev_priv, | |
| struct intel_sdvo *sdvo) | |
| { | |
| struct sdvo_device_mapping *my_mapping, *other_mapping; | |
| if (sdvo->port == PORT_B) { | |
| my_mapping = &dev_priv->vbt.sdvo_mappings[0]; | |
| other_mapping = &dev_priv->vbt.sdvo_mappings[1]; | |
| } else { | |
| my_mapping = &dev_priv->vbt.sdvo_mappings[1]; | |
| other_mapping = &dev_priv->vbt.sdvo_mappings[0]; | |
| } | |
| /* If the BIOS described our SDVO device, take advantage of it. */ | |
| if (my_mapping->slave_addr) | |
| return my_mapping->slave_addr; | |
| /* If the BIOS only described a different SDVO device, use the | |
| * address that it isn't using. | |
| */ | |
| if (other_mapping->slave_addr) { | |
| if (other_mapping->slave_addr == 0x70) | |
| return 0x72; | |
| else | |
| return 0x70; | |
| } | |
| /* No SDVO device info is found for another DVO port, | |
| * so use mapping assumption we had before BIOS parsing. | |
| */ | |
| if (sdvo->port == PORT_B) | |
| return 0x70; | |
| else | |
| return 0x72; | |
| } | |
| static int | |
| intel_sdvo_connector_init(struct intel_sdvo_connector *connector, | |
| struct intel_sdvo *encoder) | |
| { | |
| struct drm_connector *drm_connector; | |
| int ret; | |
| drm_connector = &connector->base.base; | |
| ret = drm_connector_init(encoder->base.base.dev, | |
| drm_connector, | |
| &intel_sdvo_connector_funcs, | |
| connector->base.base.connector_type); | |
| if (ret < 0) | |
| return ret; | |
| drm_connector_helper_add(drm_connector, | |
| &intel_sdvo_connector_helper_funcs); | |
| connector->base.base.interlace_allowed = 1; | |
| connector->base.base.doublescan_allowed = 0; | |
| connector->base.base.display_info.subpixel_order = SubPixelHorizontalRGB; | |
| connector->base.get_hw_state = intel_sdvo_connector_get_hw_state; | |
| intel_connector_attach_encoder(&connector->base, &encoder->base); | |
| return 0; | |
| } | |
| static void | |
| intel_sdvo_add_hdmi_properties(struct intel_sdvo *intel_sdvo, | |
| struct intel_sdvo_connector *connector) | |
| { | |
| struct drm_i915_private *dev_priv = to_i915(connector->base.base.dev); | |
| intel_attach_force_audio_property(&connector->base.base); | |
| if (INTEL_GEN(dev_priv) >= 4 && IS_MOBILE(dev_priv)) { | |
| intel_attach_broadcast_rgb_property(&connector->base.base); | |
| } | |
| intel_attach_aspect_ratio_property(&connector->base.base); | |
| connector->base.base.state->picture_aspect_ratio = HDMI_PICTURE_ASPECT_NONE; | |
| } | |
| static struct intel_sdvo_connector *intel_sdvo_connector_alloc(void) | |
| { | |
| struct intel_sdvo_connector *sdvo_connector; | |
| struct intel_sdvo_connector_state *conn_state; | |
| sdvo_connector = kzalloc(sizeof(*sdvo_connector), GFP_KERNEL); | |
| if (!sdvo_connector) | |
| return NULL; | |
| conn_state = kzalloc(sizeof(*conn_state), GFP_KERNEL); | |
| if (!conn_state) { | |
| kfree(sdvo_connector); | |
| return NULL; | |
| } | |
| __drm_atomic_helper_connector_reset(&sdvo_connector->base.base, | |
| &conn_state->base.base); | |
| return sdvo_connector; | |
| } | |
| static bool | |
| intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device) | |
| { | |
| struct drm_encoder *encoder = &intel_sdvo->base.base; | |
| struct drm_i915_private *dev_priv = to_i915(encoder->dev); | |
| struct drm_connector *connector; | |
| struct intel_encoder *intel_encoder = to_intel_encoder(encoder); | |
| struct intel_connector *intel_connector; | |
| struct intel_sdvo_connector *intel_sdvo_connector; | |
| DRM_DEBUG_KMS("initialising DVI device %d\n", device); | |
| intel_sdvo_connector = intel_sdvo_connector_alloc(); | |
| if (!intel_sdvo_connector) | |
| return false; | |
| if (device == 0) { | |
| intel_sdvo->controlled_output |= SDVO_OUTPUT_TMDS0; | |
| intel_sdvo_connector->output_flag = SDVO_OUTPUT_TMDS0; | |
| } else if (device == 1) { | |
| intel_sdvo->controlled_output |= SDVO_OUTPUT_TMDS1; | |
| intel_sdvo_connector->output_flag = SDVO_OUTPUT_TMDS1; | |
| } | |
| intel_connector = &intel_sdvo_connector->base; | |
| connector = &intel_connector->base; | |
| if (intel_sdvo_get_hotplug_support(intel_sdvo) & | |
| intel_sdvo_connector->output_flag) { | |
| intel_sdvo->hotplug_active |= intel_sdvo_connector->output_flag; | |
| /* Some SDVO devices have one-shot hotplug interrupts. | |
| * Ensure that they get re-enabled when an interrupt happens. | |
| */ | |
| intel_encoder->hot_plug = intel_sdvo_enable_hotplug; | |
| intel_sdvo_enable_hotplug(intel_encoder); | |
| } else { | |
| intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT; | |
| } | |
| encoder->encoder_type = DRM_MODE_ENCODER_TMDS; | |
| connector->connector_type = DRM_MODE_CONNECTOR_DVID; | |
| /* gen3 doesn't do the hdmi bits in the SDVO register */ | |
| if (INTEL_GEN(dev_priv) >= 4 && | |
| intel_sdvo_is_hdmi_connector(intel_sdvo, device)) { | |
| connector->connector_type = DRM_MODE_CONNECTOR_HDMIA; | |
| intel_sdvo->is_hdmi = true; | |
| } | |
| if (intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo) < 0) { | |
| kfree(intel_sdvo_connector); | |
| return false; | |
| } | |
| if (intel_sdvo->is_hdmi) | |
| intel_sdvo_add_hdmi_properties(intel_sdvo, intel_sdvo_connector); | |
| return true; | |
| } | |
| static bool | |
| intel_sdvo_tv_init(struct intel_sdvo *intel_sdvo, int type) | |
| { | |
| struct drm_encoder *encoder = &intel_sdvo->base.base; | |
| struct drm_connector *connector; | |
| struct intel_connector *intel_connector; | |
| struct intel_sdvo_connector *intel_sdvo_connector; | |
| DRM_DEBUG_KMS("initialising TV type %d\n", type); | |
| intel_sdvo_connector = intel_sdvo_connector_alloc(); | |
| if (!intel_sdvo_connector) | |
| return false; | |
| intel_connector = &intel_sdvo_connector->base; | |
| connector = &intel_connector->base; | |
| encoder->encoder_type = DRM_MODE_ENCODER_TVDAC; | |
| connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO; | |
| intel_sdvo->controlled_output |= type; | |
| intel_sdvo_connector->output_flag = type; | |
| intel_sdvo->is_tv = true; | |
| if (intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo) < 0) { | |
| kfree(intel_sdvo_connector); | |
| return false; | |
| } | |
| if (!intel_sdvo_tv_create_property(intel_sdvo, intel_sdvo_connector, type)) | |
| goto err; | |
| if (!intel_sdvo_create_enhance_property(intel_sdvo, intel_sdvo_connector)) | |
| goto err; | |
| return true; | |
| err: | |
| intel_sdvo_destroy(connector); | |
| return false; | |
| } | |
| static bool | |
| intel_sdvo_analog_init(struct intel_sdvo *intel_sdvo, int device) | |
| { | |
| struct drm_encoder *encoder = &intel_sdvo->base.base; | |
| struct drm_connector *connector; | |
| struct intel_connector *intel_connector; | |
| struct intel_sdvo_connector *intel_sdvo_connector; | |
| DRM_DEBUG_KMS("initialising analog device %d\n", device); | |
| intel_sdvo_connector = intel_sdvo_connector_alloc(); | |
| if (!intel_sdvo_connector) | |
| return false; | |
| intel_connector = &intel_sdvo_connector->base; | |
| connector = &intel_connector->base; | |
| intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT; | |
| encoder->encoder_type = DRM_MODE_ENCODER_DAC; | |
| connector->connector_type = DRM_MODE_CONNECTOR_VGA; | |
| if (device == 0) { | |
| intel_sdvo->controlled_output |= SDVO_OUTPUT_RGB0; | |
| intel_sdvo_connector->output_flag = SDVO_OUTPUT_RGB0; | |
| } else if (device == 1) { | |
| intel_sdvo->controlled_output |= SDVO_OUTPUT_RGB1; | |
| intel_sdvo_connector->output_flag = SDVO_OUTPUT_RGB1; | |
| } | |
| if (intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo) < 0) { | |
| kfree(intel_sdvo_connector); | |
| return false; | |
| } | |
| return true; | |
| } | |
| static bool | |
| intel_sdvo_lvds_init(struct intel_sdvo *intel_sdvo, int device) | |
| { | |
| struct drm_encoder *encoder = &intel_sdvo->base.base; | |
| struct drm_connector *connector; | |
| struct intel_connector *intel_connector; | |
| struct intel_sdvo_connector *intel_sdvo_connector; | |
| DRM_DEBUG_KMS("initialising LVDS device %d\n", device); | |
| intel_sdvo_connector = intel_sdvo_connector_alloc(); | |
| if (!intel_sdvo_connector) | |
| return false; | |
| intel_connector = &intel_sdvo_connector->base; | |
| connector = &intel_connector->base; | |
| encoder->encoder_type = DRM_MODE_ENCODER_LVDS; | |
| connector->connector_type = DRM_MODE_CONNECTOR_LVDS; | |
| if (device == 0) { | |
| intel_sdvo->controlled_output |= SDVO_OUTPUT_LVDS0; | |
| intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS0; | |
| } else if (device == 1) { | |
| intel_sdvo->controlled_output |= SDVO_OUTPUT_LVDS1; | |
| intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS1; | |
| } | |
| if (intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo) < 0) { | |
| kfree(intel_sdvo_connector); | |
| return false; | |
| } | |
| if (!intel_sdvo_create_enhance_property(intel_sdvo, intel_sdvo_connector)) | |
| goto err; | |
| return true; | |
| err: | |
| intel_sdvo_destroy(connector); | |
| return false; | |
| } | |
| static bool | |
| intel_sdvo_output_setup(struct intel_sdvo *intel_sdvo, uint16_t flags) | |
| { | |
| intel_sdvo->is_tv = false; | |
| intel_sdvo->is_lvds = false; | |
| /* SDVO requires XXX1 function may not exist unless it has XXX0 function.*/ | |
| if (flags & SDVO_OUTPUT_TMDS0) | |
| if (!intel_sdvo_dvi_init(intel_sdvo, 0)) | |
| return false; | |
| if ((flags & SDVO_TMDS_MASK) == SDVO_TMDS_MASK) | |
| if (!intel_sdvo_dvi_init(intel_sdvo, 1)) | |
| return false; | |
| /* TV has no XXX1 function block */ | |
| if (flags & SDVO_OUTPUT_SVID0) | |
| if (!intel_sdvo_tv_init(intel_sdvo, SDVO_OUTPUT_SVID0)) | |
| return false; | |
| if (flags & SDVO_OUTPUT_CVBS0) | |
| if (!intel_sdvo_tv_init(intel_sdvo, SDVO_OUTPUT_CVBS0)) | |
| return false; | |
| if (flags & SDVO_OUTPUT_YPRPB0) | |
| if (!intel_sdvo_tv_init(intel_sdvo, SDVO_OUTPUT_YPRPB0)) | |
| return false; | |
| if (flags & SDVO_OUTPUT_RGB0) | |
| if (!intel_sdvo_analog_init(intel_sdvo, 0)) | |
| return false; | |
| if ((flags & SDVO_RGB_MASK) == SDVO_RGB_MASK) | |
| if (!intel_sdvo_analog_init(intel_sdvo, 1)) | |
| return false; | |
| if (flags & SDVO_OUTPUT_LVDS0) | |
| if (!intel_sdvo_lvds_init(intel_sdvo, 0)) | |
| return false; | |
| if ((flags & SDVO_LVDS_MASK) == SDVO_LVDS_MASK) | |
| if (!intel_sdvo_lvds_init(intel_sdvo, 1)) | |
| return false; | |
| if ((flags & SDVO_OUTPUT_MASK) == 0) { | |
| unsigned char bytes[2]; | |
| intel_sdvo->controlled_output = 0; | |
| memcpy(bytes, &intel_sdvo->caps.output_flags, 2); | |
| DRM_DEBUG_KMS("%s: Unknown SDVO output type (0x%02x%02x)\n", | |
| SDVO_NAME(intel_sdvo), | |
| bytes[0], bytes[1]); | |
| return false; | |
| } | |
| intel_sdvo->base.crtc_mask = (1 << 0) | (1 << 1) | (1 << 2); | |
| return true; | |
| } | |
| static void intel_sdvo_output_cleanup(struct intel_sdvo *intel_sdvo) | |
| { | |
| struct drm_device *dev = intel_sdvo->base.base.dev; | |
| struct drm_connector *connector, *tmp; | |
| list_for_each_entry_safe(connector, tmp, | |
| &dev->mode_config.connector_list, head) { | |
| if (intel_attached_encoder(connector) == &intel_sdvo->base) { | |
| drm_connector_unregister(connector); | |
| intel_sdvo_destroy(connector); | |
| } | |
| } | |
| } | |
| static bool intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo, | |
| struct intel_sdvo_connector *intel_sdvo_connector, | |
| int type) | |
| { | |
| struct drm_device *dev = intel_sdvo->base.base.dev; | |
| struct intel_sdvo_tv_format format; | |
| uint32_t format_map, i; | |
| if (!intel_sdvo_set_target_output(intel_sdvo, type)) | |
| return false; | |
| BUILD_BUG_ON(sizeof(format) != 6); | |
| if (!intel_sdvo_get_value(intel_sdvo, | |
| SDVO_CMD_GET_SUPPORTED_TV_FORMATS, | |
| &format, sizeof(format))) | |
| return false; | |
| memcpy(&format_map, &format, min(sizeof(format_map), sizeof(format))); | |
| if (format_map == 0) | |
| return false; | |
| intel_sdvo_connector->format_supported_num = 0; | |
| for (i = 0 ; i < TV_FORMAT_NUM; i++) | |
| if (format_map & (1 << i)) | |
| intel_sdvo_connector->tv_format_supported[intel_sdvo_connector->format_supported_num++] = i; | |
| intel_sdvo_connector->tv_format = | |
| drm_property_create(dev, DRM_MODE_PROP_ENUM, | |
| "mode", intel_sdvo_connector->format_supported_num); | |
| if (!intel_sdvo_connector->tv_format) | |
| return false; | |
| for (i = 0; i < intel_sdvo_connector->format_supported_num; i++) | |
| drm_property_add_enum( | |
| intel_sdvo_connector->tv_format, i, | |
| i, tv_format_names[intel_sdvo_connector->tv_format_supported[i]]); | |
| intel_sdvo_connector->base.base.state->tv.mode = intel_sdvo_connector->tv_format_supported[0]; | |
| drm_object_attach_property(&intel_sdvo_connector->base.base.base, | |
| intel_sdvo_connector->tv_format, 0); | |
| return true; | |
| } | |
| #define _ENHANCEMENT(state_assignment, name, NAME) do { \ | |
| if (enhancements.name) { \ | |
| if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_MAX_##NAME, &data_value, 4) || \ | |
| !intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_##NAME, &response, 2)) \ | |
| return false; \ | |
| intel_sdvo_connector->name = \ | |
| drm_property_create_range(dev, 0, #name, 0, data_value[0]); \ | |
| if (!intel_sdvo_connector->name) return false; \ | |
| state_assignment = response; \ | |
| drm_object_attach_property(&connector->base, \ | |
| intel_sdvo_connector->name, 0); \ | |
| DRM_DEBUG_KMS(#name ": max %d, default %d, current %d\n", \ | |
| data_value[0], data_value[1], response); \ | |
| } \ | |
| } while (0) | |
| #define ENHANCEMENT(state, name, NAME) _ENHANCEMENT((state)->name, name, NAME) | |
| static bool | |
| intel_sdvo_create_enhance_property_tv(struct intel_sdvo *intel_sdvo, | |
| struct intel_sdvo_connector *intel_sdvo_connector, | |
| struct intel_sdvo_enhancements_reply enhancements) | |
| { | |
| struct drm_device *dev = intel_sdvo->base.base.dev; | |
| struct drm_connector *connector = &intel_sdvo_connector->base.base; | |
| struct drm_connector_state *conn_state = connector->state; | |
| struct intel_sdvo_connector_state *sdvo_state = | |
| to_intel_sdvo_connector_state(conn_state); | |
| uint16_t response, data_value[2]; | |
| /* when horizontal overscan is supported, Add the left/right property */ | |
| if (enhancements.overscan_h) { | |
| if (!intel_sdvo_get_value(intel_sdvo, | |
| SDVO_CMD_GET_MAX_OVERSCAN_H, | |
| &data_value, 4)) | |
| return false; | |
| if (!intel_sdvo_get_value(intel_sdvo, | |
| SDVO_CMD_GET_OVERSCAN_H, | |
| &response, 2)) | |
| return false; | |
| sdvo_state->tv.overscan_h = response; | |
| intel_sdvo_connector->max_hscan = data_value[0]; | |
| intel_sdvo_connector->left = | |
| drm_property_create_range(dev, 0, "left_margin", 0, data_value[0]); | |
| if (!intel_sdvo_connector->left) | |
| return false; | |
| drm_object_attach_property(&connector->base, | |
| intel_sdvo_connector->left, 0); | |
| intel_sdvo_connector->right = | |
| drm_property_create_range(dev, 0, "right_margin", 0, data_value[0]); | |
| if (!intel_sdvo_connector->right) | |
| return false; | |
| drm_object_attach_property(&connector->base, | |
| intel_sdvo_connector->right, 0); | |
| DRM_DEBUG_KMS("h_overscan: max %d, " | |
| "default %d, current %d\n", | |
| data_value[0], data_value[1], response); | |
| } | |
| if (enhancements.overscan_v) { | |
| if (!intel_sdvo_get_value(intel_sdvo, | |
| SDVO_CMD_GET_MAX_OVERSCAN_V, | |
| &data_value, 4)) | |
| return false; | |
| if (!intel_sdvo_get_value(intel_sdvo, | |
| SDVO_CMD_GET_OVERSCAN_V, | |
| &response, 2)) | |
| return false; | |
| sdvo_state->tv.overscan_v = response; | |
| intel_sdvo_connector->max_vscan = data_value[0]; | |
| intel_sdvo_connector->top = | |
| drm_property_create_range(dev, 0, | |
| "top_margin", 0, data_value[0]); | |
| if (!intel_sdvo_connector->top) | |
| return false; | |
| drm_object_attach_property(&connector->base, | |
| intel_sdvo_connector->top, 0); | |
| intel_sdvo_connector->bottom = | |
| drm_property_create_range(dev, 0, | |
| "bottom_margin", 0, data_value[0]); | |
| if (!intel_sdvo_connector->bottom) | |
| return false; | |
| drm_object_attach_property(&connector->base, | |
| intel_sdvo_connector->bottom, 0); | |
| DRM_DEBUG_KMS("v_overscan: max %d, " | |
| "default %d, current %d\n", | |
| data_value[0], data_value[1], response); | |
| } | |
| ENHANCEMENT(&sdvo_state->tv, hpos, HPOS); | |
| ENHANCEMENT(&sdvo_state->tv, vpos, VPOS); | |
| ENHANCEMENT(&conn_state->tv, saturation, SATURATION); | |
| ENHANCEMENT(&conn_state->tv, contrast, CONTRAST); | |
| ENHANCEMENT(&conn_state->tv, hue, HUE); | |
| ENHANCEMENT(&conn_state->tv, brightness, BRIGHTNESS); | |
| ENHANCEMENT(&sdvo_state->tv, sharpness, SHARPNESS); | |
| ENHANCEMENT(&sdvo_state->tv, flicker_filter, FLICKER_FILTER); | |
| ENHANCEMENT(&sdvo_state->tv, flicker_filter_adaptive, FLICKER_FILTER_ADAPTIVE); | |
| ENHANCEMENT(&sdvo_state->tv, flicker_filter_2d, FLICKER_FILTER_2D); | |
| _ENHANCEMENT(sdvo_state->tv.chroma_filter, tv_chroma_filter, TV_CHROMA_FILTER); | |
| _ENHANCEMENT(sdvo_state->tv.luma_filter, tv_luma_filter, TV_LUMA_FILTER); | |
| if (enhancements.dot_crawl) { | |
| if (!intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_DOT_CRAWL, &response, 2)) | |
| return false; | |
| sdvo_state->tv.dot_crawl = response & 0x1; | |
| intel_sdvo_connector->dot_crawl = | |
| drm_property_create_range(dev, 0, "dot_crawl", 0, 1); | |
| if (!intel_sdvo_connector->dot_crawl) | |
| return false; | |
| drm_object_attach_property(&connector->base, | |
| intel_sdvo_connector->dot_crawl, 0); | |
| DRM_DEBUG_KMS("dot crawl: current %d\n", response); | |
| } | |
| return true; | |
| } | |
| static bool | |
| intel_sdvo_create_enhance_property_lvds(struct intel_sdvo *intel_sdvo, | |
| struct intel_sdvo_connector *intel_sdvo_connector, | |
| struct intel_sdvo_enhancements_reply enhancements) | |
| { | |
| struct drm_device *dev = intel_sdvo->base.base.dev; | |
| struct drm_connector *connector = &intel_sdvo_connector->base.base; | |
| uint16_t response, data_value[2]; | |
| ENHANCEMENT(&connector->state->tv, brightness, BRIGHTNESS); | |
| return true; | |
| } | |
| #undef ENHANCEMENT | |
| #undef _ENHANCEMENT | |
| static bool intel_sdvo_create_enhance_property(struct intel_sdvo *intel_sdvo, | |
| struct intel_sdvo_connector *intel_sdvo_connector) | |
| { | |
| union { | |
| struct intel_sdvo_enhancements_reply reply; | |
| uint16_t response; | |
| } enhancements; | |
| BUILD_BUG_ON(sizeof(enhancements) != 2); | |
| if (!intel_sdvo_get_value(intel_sdvo, | |
| SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS, | |
| &enhancements, sizeof(enhancements)) || | |
| enhancements.response == 0) { | |
| DRM_DEBUG_KMS("No enhancement is supported\n"); | |
| return true; | |
| } | |
| if (IS_TV(intel_sdvo_connector)) | |
| return intel_sdvo_create_enhance_property_tv(intel_sdvo, intel_sdvo_connector, enhancements.reply); | |
| else if (IS_LVDS(intel_sdvo_connector)) | |
| return intel_sdvo_create_enhance_property_lvds(intel_sdvo, intel_sdvo_connector, enhancements.reply); | |
| else | |
| return true; | |
| } | |
| static int intel_sdvo_ddc_proxy_xfer(struct i2c_adapter *adapter, | |
| struct i2c_msg *msgs, | |
| int num) | |
| { | |
| struct intel_sdvo *sdvo = adapter->algo_data; | |
| if (!__intel_sdvo_set_control_bus_switch(sdvo, sdvo->ddc_bus)) | |
| return -EIO; | |
| return sdvo->i2c->algo->master_xfer(sdvo->i2c, msgs, num); | |
| } | |
| static u32 intel_sdvo_ddc_proxy_func(struct i2c_adapter *adapter) | |
| { | |
| struct intel_sdvo *sdvo = adapter->algo_data; | |
| return sdvo->i2c->algo->functionality(sdvo->i2c); | |
| } | |
| static const struct i2c_algorithm intel_sdvo_ddc_proxy = { | |
| .master_xfer = intel_sdvo_ddc_proxy_xfer, | |
| .functionality = intel_sdvo_ddc_proxy_func | |
| }; | |
| static void proxy_lock_bus(struct i2c_adapter *adapter, | |
| unsigned int flags) | |
| { | |
| struct intel_sdvo *sdvo = adapter->algo_data; | |
| sdvo->i2c->lock_ops->lock_bus(sdvo->i2c, flags); | |
| } | |
| static int proxy_trylock_bus(struct i2c_adapter *adapter, | |
| unsigned int flags) | |
| { | |
| struct intel_sdvo *sdvo = adapter->algo_data; | |
| return sdvo->i2c->lock_ops->trylock_bus(sdvo->i2c, flags); | |
| } | |
| static void proxy_unlock_bus(struct i2c_adapter *adapter, | |
| unsigned int flags) | |
| { | |
| struct intel_sdvo *sdvo = adapter->algo_data; | |
| sdvo->i2c->lock_ops->unlock_bus(sdvo->i2c, flags); | |
| } | |
| static const struct i2c_lock_operations proxy_lock_ops = { | |
| .lock_bus = proxy_lock_bus, | |
| .trylock_bus = proxy_trylock_bus, | |
| .unlock_bus = proxy_unlock_bus, | |
| }; | |
| static bool | |
| intel_sdvo_init_ddc_proxy(struct intel_sdvo *sdvo, | |
| struct drm_i915_private *dev_priv) | |
| { | |
| struct pci_dev *pdev = dev_priv->drm.pdev; | |
| sdvo->ddc.owner = THIS_MODULE; | |
| sdvo->ddc.class = I2C_CLASS_DDC; | |
| snprintf(sdvo->ddc.name, I2C_NAME_SIZE, "SDVO DDC proxy"); | |
| sdvo->ddc.dev.parent = &pdev->dev; | |
| sdvo->ddc.algo_data = sdvo; | |
| sdvo->ddc.algo = &intel_sdvo_ddc_proxy; | |
| sdvo->ddc.lock_ops = &proxy_lock_ops; | |
| return i2c_add_adapter(&sdvo->ddc) == 0; | |
| } | |
| static void assert_sdvo_port_valid(const struct drm_i915_private *dev_priv, | |
| enum port port) | |
| { | |
| if (HAS_PCH_SPLIT(dev_priv)) | |
| WARN_ON(port != PORT_B); | |
| else | |
| WARN_ON(port != PORT_B && port != PORT_C); | |
| } | |
| bool intel_sdvo_init(struct drm_i915_private *dev_priv, | |
| i915_reg_t sdvo_reg, enum port port) | |
| { | |
| struct intel_encoder *intel_encoder; | |
| struct intel_sdvo *intel_sdvo; | |
| int i; | |
| assert_sdvo_port_valid(dev_priv, port); | |
| intel_sdvo = kzalloc(sizeof(*intel_sdvo), GFP_KERNEL); | |
| if (!intel_sdvo) | |
| return false; | |
| intel_sdvo->sdvo_reg = sdvo_reg; | |
| intel_sdvo->port = port; | |
| intel_sdvo->slave_addr = | |
| intel_sdvo_get_slave_addr(dev_priv, intel_sdvo) >> 1; | |
| intel_sdvo_select_i2c_bus(dev_priv, intel_sdvo); | |
| if (!intel_sdvo_init_ddc_proxy(intel_sdvo, dev_priv)) | |
| goto err_i2c_bus; | |
| /* encoder type will be decided later */ | |
| intel_encoder = &intel_sdvo->base; | |
| intel_encoder->type = INTEL_OUTPUT_SDVO; | |
| intel_encoder->power_domain = POWER_DOMAIN_PORT_OTHER; | |
| intel_encoder->port = port; | |
| drm_encoder_init(&dev_priv->drm, &intel_encoder->base, | |
| &intel_sdvo_enc_funcs, 0, | |
| "SDVO %c", port_name(port)); | |
| /* Read the regs to test if we can talk to the device */ | |
| for (i = 0; i < 0x40; i++) { | |
| u8 byte; | |
| if (!intel_sdvo_read_byte(intel_sdvo, i, &byte)) { | |
| DRM_DEBUG_KMS("No SDVO device found on %s\n", | |
| SDVO_NAME(intel_sdvo)); | |
| goto err; | |
| } | |
| } | |
| intel_encoder->compute_config = intel_sdvo_compute_config; | |
| if (HAS_PCH_SPLIT(dev_priv)) { | |
| intel_encoder->disable = pch_disable_sdvo; | |
| intel_encoder->post_disable = pch_post_disable_sdvo; | |
| } else { | |
| intel_encoder->disable = intel_disable_sdvo; | |
| } | |
| intel_encoder->pre_enable = intel_sdvo_pre_enable; | |
| intel_encoder->enable = intel_enable_sdvo; | |
| intel_encoder->get_hw_state = intel_sdvo_get_hw_state; | |
| intel_encoder->get_config = intel_sdvo_get_config; | |
| /* In default case sdvo lvds is false */ | |
| if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps)) | |
| goto err; | |
| if (intel_sdvo_output_setup(intel_sdvo, | |
| intel_sdvo->caps.output_flags) != true) { | |
| DRM_DEBUG_KMS("SDVO output failed to setup on %s\n", | |
| SDVO_NAME(intel_sdvo)); | |
| /* Output_setup can leave behind connectors! */ | |
| goto err_output; | |
| } | |
| /* Only enable the hotplug irq if we need it, to work around noisy | |
| * hotplug lines. | |
| */ | |
| if (intel_sdvo->hotplug_active) { | |
| if (intel_sdvo->port == PORT_B) | |
| intel_encoder->hpd_pin = HPD_SDVO_B; | |
| else | |
| intel_encoder->hpd_pin = HPD_SDVO_C; | |
| } | |
| /* | |
| * Cloning SDVO with anything is often impossible, since the SDVO | |
| * encoder can request a special input timing mode. And even if that's | |
| * not the case we have evidence that cloning a plain unscaled mode with | |
| * VGA doesn't really work. Furthermore the cloning flags are way too | |
| * simplistic anyway to express such constraints, so just give up on | |
| * cloning for SDVO encoders. | |
| */ | |
| intel_sdvo->base.cloneable = 0; | |
| intel_sdvo_select_ddc_bus(dev_priv, intel_sdvo); | |
| /* Set the input timing to the screen. Assume always input 0. */ | |
| if (!intel_sdvo_set_target_input(intel_sdvo)) | |
| goto err_output; | |
| if (!intel_sdvo_get_input_pixel_clock_range(intel_sdvo, | |
| &intel_sdvo->pixel_clock_min, | |
| &intel_sdvo->pixel_clock_max)) | |
| goto err_output; | |
| DRM_DEBUG_KMS("%s device VID/DID: %02X:%02X.%02X, " | |
| "clock range %dMHz - %dMHz, " | |
| "input 1: %c, input 2: %c, " | |
| "output 1: %c, output 2: %c\n", | |
| SDVO_NAME(intel_sdvo), | |
| intel_sdvo->caps.vendor_id, intel_sdvo->caps.device_id, | |
| intel_sdvo->caps.device_rev_id, | |
| intel_sdvo->pixel_clock_min / 1000, | |
| intel_sdvo->pixel_clock_max / 1000, | |
| (intel_sdvo->caps.sdvo_inputs_mask & 0x1) ? 'Y' : 'N', | |
| (intel_sdvo->caps.sdvo_inputs_mask & 0x2) ? 'Y' : 'N', | |
| /* check currently supported outputs */ | |
| intel_sdvo->caps.output_flags & | |
| (SDVO_OUTPUT_TMDS0 | SDVO_OUTPUT_RGB0) ? 'Y' : 'N', | |
| intel_sdvo->caps.output_flags & | |
| (SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N'); | |
| return true; | |
| err_output: | |
| intel_sdvo_output_cleanup(intel_sdvo); | |
| err: | |
| drm_encoder_cleanup(&intel_encoder->base); | |
| i2c_del_adapter(&intel_sdvo->ddc); | |
| err_i2c_bus: | |
| intel_sdvo_unselect_i2c_bus(intel_sdvo); | |
| kfree(intel_sdvo); | |
| return false; | |
| } |