| /* | |
| * Architecture specific parts of the Floppy driver | |
| * | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| * | |
| * Copyright (C) 1995 | |
| */ | |
| #ifndef _ASM_X86_FLOPPY_H | |
| #define _ASM_X86_FLOPPY_H | |
| #include <linux/vmalloc.h> | |
| /* | |
| * The DMA channel used by the floppy controller cannot access data at | |
| * addresses >= 16MB | |
| * | |
| * Went back to the 1MB limit, as some people had problems with the floppy | |
| * driver otherwise. It doesn't matter much for performance anyway, as most | |
| * floppy accesses go through the track buffer. | |
| */ | |
| #define _CROSS_64KB(a, s, vdma) \ | |
| (!(vdma) && \ | |
| ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64)) | |
| #define CROSS_64KB(a, s) _CROSS_64KB(a, s, use_virtual_dma & 1) | |
| #define SW fd_routine[use_virtual_dma & 1] | |
| #define CSW fd_routine[can_use_virtual_dma & 1] | |
| #define fd_inb(port) inb_p(port) | |
| #define fd_outb(value, port) outb_p(value, port) | |
| #define fd_request_dma() CSW._request_dma(FLOPPY_DMA, "floppy") | |
| #define fd_free_dma() CSW._free_dma(FLOPPY_DMA) | |
| #define fd_enable_irq() enable_irq(FLOPPY_IRQ) | |
| #define fd_disable_irq() disable_irq(FLOPPY_IRQ) | |
| #define fd_free_irq() free_irq(FLOPPY_IRQ, NULL) | |
| #define fd_get_dma_residue() SW._get_dma_residue(FLOPPY_DMA) | |
| #define fd_dma_mem_alloc(size) SW._dma_mem_alloc(size) | |
| #define fd_dma_setup(addr, size, mode, io) SW._dma_setup(addr, size, mode, io) | |
| #define FLOPPY_CAN_FALLBACK_ON_NODMA | |
| static int virtual_dma_count; | |
| static int virtual_dma_residue; | |
| static char *virtual_dma_addr; | |
| static int virtual_dma_mode; | |
| static int doing_pdma; | |
| static irqreturn_t floppy_hardint(int irq, void *dev_id) | |
| { | |
| unsigned char st; | |
| #undef TRACE_FLPY_INT | |
| #ifdef TRACE_FLPY_INT | |
| static int calls; | |
| static int bytes; | |
| static int dma_wait; | |
| #endif | |
| if (!doing_pdma) | |
| return floppy_interrupt(irq, dev_id); | |
| #ifdef TRACE_FLPY_INT | |
| if (!calls) | |
| bytes = virtual_dma_count; | |
| #endif | |
| { | |
| int lcount; | |
| char *lptr; | |
| st = 1; | |
| for (lcount = virtual_dma_count, lptr = virtual_dma_addr; | |
| lcount; lcount--, lptr++) { | |
| st = inb(virtual_dma_port + 4) & 0xa0; | |
| if (st != 0xa0) | |
| break; | |
| if (virtual_dma_mode) | |
| outb_p(*lptr, virtual_dma_port + 5); | |
| else | |
| *lptr = inb_p(virtual_dma_port + 5); | |
| } | |
| virtual_dma_count = lcount; | |
| virtual_dma_addr = lptr; | |
| st = inb(virtual_dma_port + 4); | |
| } | |
| #ifdef TRACE_FLPY_INT | |
| calls++; | |
| #endif | |
| if (st == 0x20) | |
| return IRQ_HANDLED; | |
| if (!(st & 0x20)) { | |
| virtual_dma_residue += virtual_dma_count; | |
| virtual_dma_count = 0; | |
| #ifdef TRACE_FLPY_INT | |
| printk(KERN_DEBUG "count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n", | |
| virtual_dma_count, virtual_dma_residue, calls, bytes, | |
| dma_wait); | |
| calls = 0; | |
| dma_wait = 0; | |
| #endif | |
| doing_pdma = 0; | |
| floppy_interrupt(irq, dev_id); | |
| return IRQ_HANDLED; | |
| } | |
| #ifdef TRACE_FLPY_INT | |
| if (!virtual_dma_count) | |
| dma_wait++; | |
| #endif | |
| return IRQ_HANDLED; | |
| } | |
| static void fd_disable_dma(void) | |
| { | |
| if (!(can_use_virtual_dma & 1)) | |
| disable_dma(FLOPPY_DMA); | |
| doing_pdma = 0; | |
| virtual_dma_residue += virtual_dma_count; | |
| virtual_dma_count = 0; | |
| } | |
| static int vdma_request_dma(unsigned int dmanr, const char *device_id) | |
| { | |
| return 0; | |
| } | |
| static void vdma_nop(unsigned int dummy) | |
| { | |
| } | |
| static int vdma_get_dma_residue(unsigned int dummy) | |
| { | |
| return virtual_dma_count + virtual_dma_residue; | |
| } | |
| static int fd_request_irq(void) | |
| { | |
| if (can_use_virtual_dma) | |
| return request_irq(FLOPPY_IRQ, floppy_hardint, | |
| 0, "floppy", NULL); | |
| else | |
| return request_irq(FLOPPY_IRQ, floppy_interrupt, | |
| 0, "floppy", NULL); | |
| } | |
| static unsigned long dma_mem_alloc(unsigned long size) | |
| { | |
| return __get_dma_pages(GFP_KERNEL|__GFP_NORETRY, get_order(size)); | |
| } | |
| static unsigned long vdma_mem_alloc(unsigned long size) | |
| { | |
| return (unsigned long)vmalloc(size); | |
| } | |
| #define nodma_mem_alloc(size) vdma_mem_alloc(size) | |
| static void _fd_dma_mem_free(unsigned long addr, unsigned long size) | |
| { | |
| if ((unsigned long)addr >= (unsigned long)high_memory) | |
| vfree((void *)addr); | |
| else | |
| free_pages(addr, get_order(size)); | |
| } | |
| #define fd_dma_mem_free(addr, size) _fd_dma_mem_free(addr, size) | |
| static void _fd_chose_dma_mode(char *addr, unsigned long size) | |
| { | |
| if (can_use_virtual_dma == 2) { | |
| if ((unsigned long)addr >= (unsigned long)high_memory || | |
| isa_virt_to_bus(addr) >= 0x1000000 || | |
| _CROSS_64KB(addr, size, 0)) | |
| use_virtual_dma = 1; | |
| else | |
| use_virtual_dma = 0; | |
| } else { | |
| use_virtual_dma = can_use_virtual_dma & 1; | |
| } | |
| } | |
| #define fd_chose_dma_mode(addr, size) _fd_chose_dma_mode(addr, size) | |
| static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io) | |
| { | |
| doing_pdma = 1; | |
| virtual_dma_port = io; | |
| virtual_dma_mode = (mode == DMA_MODE_WRITE); | |
| virtual_dma_addr = addr; | |
| virtual_dma_count = size; | |
| virtual_dma_residue = 0; | |
| return 0; | |
| } | |
| static int hard_dma_setup(char *addr, unsigned long size, int mode, int io) | |
| { | |
| #ifdef FLOPPY_SANITY_CHECK | |
| if (CROSS_64KB(addr, size)) { | |
| printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size); | |
| return -1; | |
| } | |
| #endif | |
| /* actual, physical DMA */ | |
| doing_pdma = 0; | |
| clear_dma_ff(FLOPPY_DMA); | |
| set_dma_mode(FLOPPY_DMA, mode); | |
| set_dma_addr(FLOPPY_DMA, isa_virt_to_bus(addr)); | |
| set_dma_count(FLOPPY_DMA, size); | |
| enable_dma(FLOPPY_DMA); | |
| return 0; | |
| } | |
| static struct fd_routine_l { | |
| int (*_request_dma)(unsigned int dmanr, const char *device_id); | |
| void (*_free_dma)(unsigned int dmanr); | |
| int (*_get_dma_residue)(unsigned int dummy); | |
| unsigned long (*_dma_mem_alloc)(unsigned long size); | |
| int (*_dma_setup)(char *addr, unsigned long size, int mode, int io); | |
| } fd_routine[] = { | |
| { | |
| ._request_dma = request_dma, | |
| ._free_dma = free_dma, | |
| ._get_dma_residue = get_dma_residue, | |
| ._dma_mem_alloc = dma_mem_alloc, | |
| ._dma_setup = hard_dma_setup | |
| }, | |
| { | |
| ._request_dma = vdma_request_dma, | |
| ._free_dma = vdma_nop, | |
| ._get_dma_residue = vdma_get_dma_residue, | |
| ._dma_mem_alloc = vdma_mem_alloc, | |
| ._dma_setup = vdma_dma_setup | |
| } | |
| }; | |
| static int FDC1 = 0x3f0; | |
| static int FDC2 = -1; | |
| /* | |
| * Floppy types are stored in the rtc's CMOS RAM and so rtc_lock | |
| * is needed to prevent corrupted CMOS RAM in case "insmod floppy" | |
| * coincides with another rtc CMOS user. Paul G. | |
| */ | |
| #define FLOPPY0_TYPE \ | |
| ({ \ | |
| unsigned long flags; \ | |
| unsigned char val; \ | |
| spin_lock_irqsave(&rtc_lock, flags); \ | |
| val = (CMOS_READ(0x10) >> 4) & 15; \ | |
| spin_unlock_irqrestore(&rtc_lock, flags); \ | |
| val; \ | |
| }) | |
| #define FLOPPY1_TYPE \ | |
| ({ \ | |
| unsigned long flags; \ | |
| unsigned char val; \ | |
| spin_lock_irqsave(&rtc_lock, flags); \ | |
| val = CMOS_READ(0x10) & 15; \ | |
| spin_unlock_irqrestore(&rtc_lock, flags); \ | |
| val; \ | |
| }) | |
| #define N_FDC 2 | |
| #define N_DRIVE 8 | |
| #define EXTRA_FLOPPY_PARAMS | |
| #endif /* _ASM_X86_FLOPPY_H */ |