| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * SS1000/SC2000 interrupt handling. | |
| * | |
| * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) | |
| * Heavily based on arch/sparc/kernel/irq.c. | |
| */ | |
| #include <linux/kernel_stat.h> | |
| #include <linux/slab.h> | |
| #include <linux/seq_file.h> | |
| #include <asm/timer.h> | |
| #include <asm/traps.h> | |
| #include <asm/irq.h> | |
| #include <asm/io.h> | |
| #include <asm/sbi.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/setup.h> | |
| #include <asm/oplib.h> | |
| #include "kernel.h" | |
| #include "irq.h" | |
| /* Sun4d interrupts fall roughly into two categories. SBUS and | |
| * cpu local. CPU local interrupts cover the timer interrupts | |
| * and whatnot, and we encode those as normal PILs between | |
| * 0 and 15. | |
| * SBUS interrupts are encodes as a combination of board, level and slot. | |
| */ | |
| struct sun4d_handler_data { | |
| unsigned int cpuid; /* target cpu */ | |
| unsigned int real_irq; /* interrupt level */ | |
| }; | |
| static unsigned int sun4d_encode_irq(int board, int lvl, int slot) | |
| { | |
| return (board + 1) << 5 | (lvl << 2) | slot; | |
| } | |
| struct sun4d_timer_regs { | |
| u32 l10_timer_limit; | |
| u32 l10_cur_countx; | |
| u32 l10_limit_noclear; | |
| u32 ctrl; | |
| u32 l10_cur_count; | |
| }; | |
| static struct sun4d_timer_regs __iomem *sun4d_timers; | |
| #define SUN4D_TIMER_IRQ 10 | |
| /* Specify which cpu handle interrupts from which board. | |
| * Index is board - value is cpu. | |
| */ | |
| static unsigned char board_to_cpu[32]; | |
| static int pil_to_sbus[] = { | |
| 0, | |
| 0, | |
| 1, | |
| 2, | |
| 0, | |
| 3, | |
| 0, | |
| 4, | |
| 0, | |
| 5, | |
| 0, | |
| 6, | |
| 0, | |
| 7, | |
| 0, | |
| 0, | |
| }; | |
| /* Exported for sun4d_smp.c */ | |
| DEFINE_SPINLOCK(sun4d_imsk_lock); | |
| /* SBUS interrupts are encoded integers including the board number | |
| * (plus one), the SBUS level, and the SBUS slot number. Sun4D | |
| * IRQ dispatch is done by: | |
| * | |
| * 1) Reading the BW local interrupt table in order to get the bus | |
| * interrupt mask. | |
| * | |
| * This table is indexed by SBUS interrupt level which can be | |
| * derived from the PIL we got interrupted on. | |
| * | |
| * 2) For each bus showing interrupt pending from #1, read the | |
| * SBI interrupt state register. This will indicate which slots | |
| * have interrupts pending for that SBUS interrupt level. | |
| * | |
| * 3) Call the genreric IRQ support. | |
| */ | |
| static void sun4d_sbus_handler_irq(int sbusl) | |
| { | |
| unsigned int bus_mask; | |
| unsigned int sbino, slot; | |
| unsigned int sbil; | |
| bus_mask = bw_get_intr_mask(sbusl) & 0x3ffff; | |
| bw_clear_intr_mask(sbusl, bus_mask); | |
| sbil = (sbusl << 2); | |
| /* Loop for each pending SBI */ | |
| for (sbino = 0; bus_mask; sbino++, bus_mask >>= 1) { | |
| unsigned int idx, mask; | |
| if (!(bus_mask & 1)) | |
| continue; | |
| /* XXX This seems to ACK the irq twice. acquire_sbi() | |
| * XXX uses swap, therefore this writes 0xf << sbil, | |
| * XXX then later release_sbi() will write the individual | |
| * XXX bits which were set again. | |
| */ | |
| mask = acquire_sbi(SBI2DEVID(sbino), 0xf << sbil); | |
| mask &= (0xf << sbil); | |
| /* Loop for each pending SBI slot */ | |
| slot = (1 << sbil); | |
| for (idx = 0; mask != 0; idx++, slot <<= 1) { | |
| unsigned int pil; | |
| struct irq_bucket *p; | |
| if (!(mask & slot)) | |
| continue; | |
| mask &= ~slot; | |
| pil = sun4d_encode_irq(sbino, sbusl, idx); | |
| p = irq_map[pil]; | |
| while (p) { | |
| struct irq_bucket *next; | |
| next = p->next; | |
| generic_handle_irq(p->irq); | |
| p = next; | |
| } | |
| release_sbi(SBI2DEVID(sbino), slot); | |
| } | |
| } | |
| } | |
| void sun4d_handler_irq(unsigned int pil, struct pt_regs *regs) | |
| { | |
| struct pt_regs *old_regs; | |
| /* SBUS IRQ level (1 - 7) */ | |
| int sbusl = pil_to_sbus[pil]; | |
| /* FIXME: Is this necessary?? */ | |
| cc_get_ipen(); | |
| cc_set_iclr(1 << pil); | |
| #ifdef CONFIG_SMP | |
| /* | |
| * Check IPI data structures after IRQ has been cleared. Hard and Soft | |
| * IRQ can happen at the same time, so both cases are always handled. | |
| */ | |
| if (pil == SUN4D_IPI_IRQ) | |
| sun4d_ipi_interrupt(); | |
| #endif | |
| old_regs = set_irq_regs(regs); | |
| irq_enter(); | |
| if (sbusl == 0) { | |
| /* cpu interrupt */ | |
| struct irq_bucket *p; | |
| p = irq_map[pil]; | |
| while (p) { | |
| struct irq_bucket *next; | |
| next = p->next; | |
| generic_handle_irq(p->irq); | |
| p = next; | |
| } | |
| } else { | |
| /* SBUS interrupt */ | |
| sun4d_sbus_handler_irq(sbusl); | |
| } | |
| irq_exit(); | |
| set_irq_regs(old_regs); | |
| } | |
| static void sun4d_mask_irq(struct irq_data *data) | |
| { | |
| struct sun4d_handler_data *handler_data = irq_data_get_irq_handler_data(data); | |
| unsigned int real_irq; | |
| #ifdef CONFIG_SMP | |
| int cpuid = handler_data->cpuid; | |
| unsigned long flags; | |
| #endif | |
| real_irq = handler_data->real_irq; | |
| #ifdef CONFIG_SMP | |
| spin_lock_irqsave(&sun4d_imsk_lock, flags); | |
| cc_set_imsk_other(cpuid, cc_get_imsk_other(cpuid) | (1 << real_irq)); | |
| spin_unlock_irqrestore(&sun4d_imsk_lock, flags); | |
| #else | |
| cc_set_imsk(cc_get_imsk() | (1 << real_irq)); | |
| #endif | |
| } | |
| static void sun4d_unmask_irq(struct irq_data *data) | |
| { | |
| struct sun4d_handler_data *handler_data = irq_data_get_irq_handler_data(data); | |
| unsigned int real_irq; | |
| #ifdef CONFIG_SMP | |
| int cpuid = handler_data->cpuid; | |
| unsigned long flags; | |
| #endif | |
| real_irq = handler_data->real_irq; | |
| #ifdef CONFIG_SMP | |
| spin_lock_irqsave(&sun4d_imsk_lock, flags); | |
| cc_set_imsk_other(cpuid, cc_get_imsk_other(cpuid) & ~(1 << real_irq)); | |
| spin_unlock_irqrestore(&sun4d_imsk_lock, flags); | |
| #else | |
| cc_set_imsk(cc_get_imsk() & ~(1 << real_irq)); | |
| #endif | |
| } | |
| static unsigned int sun4d_startup_irq(struct irq_data *data) | |
| { | |
| irq_link(data->irq); | |
| sun4d_unmask_irq(data); | |
| return 0; | |
| } | |
| static void sun4d_shutdown_irq(struct irq_data *data) | |
| { | |
| sun4d_mask_irq(data); | |
| irq_unlink(data->irq); | |
| } | |
| static struct irq_chip sun4d_irq = { | |
| .name = "sun4d", | |
| .irq_startup = sun4d_startup_irq, | |
| .irq_shutdown = sun4d_shutdown_irq, | |
| .irq_unmask = sun4d_unmask_irq, | |
| .irq_mask = sun4d_mask_irq, | |
| }; | |
| #ifdef CONFIG_SMP | |
| /* Setup IRQ distribution scheme. */ | |
| void __init sun4d_distribute_irqs(void) | |
| { | |
| struct device_node *dp; | |
| int cpuid = cpu_logical_map(1); | |
| if (cpuid == -1) | |
| cpuid = cpu_logical_map(0); | |
| for_each_node_by_name(dp, "sbi") { | |
| int devid = of_getintprop_default(dp, "device-id", 0); | |
| int board = of_getintprop_default(dp, "board#", 0); | |
| board_to_cpu[board] = cpuid; | |
| set_sbi_tid(devid, cpuid << 3); | |
| } | |
| printk(KERN_ERR "All sbus IRQs directed to CPU%d\n", cpuid); | |
| } | |
| #endif | |
| static void sun4d_clear_clock_irq(void) | |
| { | |
| sbus_readl(&sun4d_timers->l10_timer_limit); | |
| } | |
| static void sun4d_load_profile_irq(int cpu, unsigned int limit) | |
| { | |
| unsigned int value = limit ? timer_value(limit) : 0; | |
| bw_set_prof_limit(cpu, value); | |
| } | |
| static void __init sun4d_load_profile_irqs(void) | |
| { | |
| int cpu = 0, mid; | |
| while (!cpu_find_by_instance(cpu, NULL, &mid)) { | |
| sun4d_load_profile_irq(mid >> 3, 0); | |
| cpu++; | |
| } | |
| } | |
| static unsigned int _sun4d_build_device_irq(unsigned int real_irq, | |
| unsigned int pil, | |
| unsigned int board) | |
| { | |
| struct sun4d_handler_data *handler_data; | |
| unsigned int irq; | |
| irq = irq_alloc(real_irq, pil); | |
| if (irq == 0) { | |
| prom_printf("IRQ: allocate for %d %d %d failed\n", | |
| real_irq, pil, board); | |
| goto err_out; | |
| } | |
| handler_data = irq_get_handler_data(irq); | |
| if (unlikely(handler_data)) | |
| goto err_out; | |
| handler_data = kzalloc(sizeof(struct sun4d_handler_data), GFP_ATOMIC); | |
| if (unlikely(!handler_data)) { | |
| prom_printf("IRQ: kzalloc(sun4d_handler_data) failed.\n"); | |
| prom_halt(); | |
| } | |
| handler_data->cpuid = board_to_cpu[board]; | |
| handler_data->real_irq = real_irq; | |
| irq_set_chip_and_handler_name(irq, &sun4d_irq, | |
| handle_level_irq, "level"); | |
| irq_set_handler_data(irq, handler_data); | |
| err_out: | |
| return irq; | |
| } | |
| static unsigned int sun4d_build_device_irq(struct platform_device *op, | |
| unsigned int real_irq) | |
| { | |
| struct device_node *dp = op->dev.of_node; | |
| struct device_node *board_parent, *bus = dp->parent; | |
| char *bus_connection; | |
| const struct linux_prom_registers *regs; | |
| unsigned int pil; | |
| unsigned int irq; | |
| int board, slot; | |
| int sbusl; | |
| irq = real_irq; | |
| while (bus) { | |
| if (!strcmp(bus->name, "sbi")) { | |
| bus_connection = "io-unit"; | |
| break; | |
| } | |
| if (!strcmp(bus->name, "bootbus")) { | |
| bus_connection = "cpu-unit"; | |
| break; | |
| } | |
| bus = bus->parent; | |
| } | |
| if (!bus) | |
| goto err_out; | |
| regs = of_get_property(dp, "reg", NULL); | |
| if (!regs) | |
| goto err_out; | |
| slot = regs->which_io; | |
| /* | |
| * If Bus nodes parent is not io-unit/cpu-unit or the io-unit/cpu-unit | |
| * lacks a "board#" property, something is very wrong. | |
| */ | |
| if (!bus->parent || strcmp(bus->parent->name, bus_connection)) { | |
| printk(KERN_ERR "%s: Error, parent is not %s.\n", | |
| bus->full_name, bus_connection); | |
| goto err_out; | |
| } | |
| board_parent = bus->parent; | |
| board = of_getintprop_default(board_parent, "board#", -1); | |
| if (board == -1) { | |
| printk(KERN_ERR "%s: Error, lacks board# property.\n", | |
| board_parent->full_name); | |
| goto err_out; | |
| } | |
| sbusl = pil_to_sbus[real_irq]; | |
| if (sbusl) | |
| pil = sun4d_encode_irq(board, sbusl, slot); | |
| else | |
| pil = real_irq; | |
| irq = _sun4d_build_device_irq(real_irq, pil, board); | |
| err_out: | |
| return irq; | |
| } | |
| static unsigned int sun4d_build_timer_irq(unsigned int board, | |
| unsigned int real_irq) | |
| { | |
| return _sun4d_build_device_irq(real_irq, real_irq, board); | |
| } | |
| static void __init sun4d_fixup_trap_table(void) | |
| { | |
| #ifdef CONFIG_SMP | |
| unsigned long flags; | |
| struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)]; | |
| /* Adjust so that we jump directly to smp4d_ticker */ | |
| lvl14_save[2] += smp4d_ticker - real_irq_entry; | |
| /* For SMP we use the level 14 ticker, however the bootup code | |
| * has copied the firmware's level 14 vector into the boot cpu's | |
| * trap table, we must fix this now or we get squashed. | |
| */ | |
| local_irq_save(flags); | |
| patchme_maybe_smp_msg[0] = 0x01000000; /* NOP out the branch */ | |
| trap_table->inst_one = lvl14_save[0]; | |
| trap_table->inst_two = lvl14_save[1]; | |
| trap_table->inst_three = lvl14_save[2]; | |
| trap_table->inst_four = lvl14_save[3]; | |
| local_ops->cache_all(); | |
| local_irq_restore(flags); | |
| #endif | |
| } | |
| static void __init sun4d_init_timers(void) | |
| { | |
| struct device_node *dp; | |
| struct resource res; | |
| unsigned int irq; | |
| const u32 *reg; | |
| int err; | |
| int board; | |
| dp = of_find_node_by_name(NULL, "cpu-unit"); | |
| if (!dp) { | |
| prom_printf("sun4d_init_timers: Unable to find cpu-unit\n"); | |
| prom_halt(); | |
| } | |
| /* Which cpu-unit we use is arbitrary, we can view the bootbus timer | |
| * registers via any cpu's mapping. The first 'reg' property is the | |
| * bootbus. | |
| */ | |
| reg = of_get_property(dp, "reg", NULL); | |
| if (!reg) { | |
| prom_printf("sun4d_init_timers: No reg property\n"); | |
| prom_halt(); | |
| } | |
| board = of_getintprop_default(dp, "board#", -1); | |
| if (board == -1) { | |
| prom_printf("sun4d_init_timers: No board# property on cpu-unit\n"); | |
| prom_halt(); | |
| } | |
| of_node_put(dp); | |
| res.start = reg[1]; | |
| res.end = reg[2] - 1; | |
| res.flags = reg[0] & 0xff; | |
| sun4d_timers = of_ioremap(&res, BW_TIMER_LIMIT, | |
| sizeof(struct sun4d_timer_regs), "user timer"); | |
| if (!sun4d_timers) { | |
| prom_printf("sun4d_init_timers: Can't map timer regs\n"); | |
| prom_halt(); | |
| } | |
| #ifdef CONFIG_SMP | |
| sparc_config.cs_period = SBUS_CLOCK_RATE * 2; /* 2 seconds */ | |
| #else | |
| sparc_config.cs_period = SBUS_CLOCK_RATE / HZ; /* 1/HZ sec */ | |
| sparc_config.features |= FEAT_L10_CLOCKEVENT; | |
| #endif | |
| sparc_config.features |= FEAT_L10_CLOCKSOURCE; | |
| sbus_writel(timer_value(sparc_config.cs_period), | |
| &sun4d_timers->l10_timer_limit); | |
| master_l10_counter = &sun4d_timers->l10_cur_count; | |
| irq = sun4d_build_timer_irq(board, SUN4D_TIMER_IRQ); | |
| err = request_irq(irq, timer_interrupt, IRQF_TIMER, "timer", NULL); | |
| if (err) { | |
| prom_printf("sun4d_init_timers: request_irq() failed with %d\n", | |
| err); | |
| prom_halt(); | |
| } | |
| sun4d_load_profile_irqs(); | |
| sun4d_fixup_trap_table(); | |
| } | |
| void __init sun4d_init_sbi_irq(void) | |
| { | |
| struct device_node *dp; | |
| int target_cpu; | |
| target_cpu = boot_cpu_id; | |
| for_each_node_by_name(dp, "sbi") { | |
| int devid = of_getintprop_default(dp, "device-id", 0); | |
| int board = of_getintprop_default(dp, "board#", 0); | |
| unsigned int mask; | |
| set_sbi_tid(devid, target_cpu << 3); | |
| board_to_cpu[board] = target_cpu; | |
| /* Get rid of pending irqs from PROM */ | |
| mask = acquire_sbi(devid, 0xffffffff); | |
| if (mask) { | |
| printk(KERN_ERR "Clearing pending IRQs %08x on SBI %d\n", | |
| mask, board); | |
| release_sbi(devid, mask); | |
| } | |
| } | |
| } | |
| void __init sun4d_init_IRQ(void) | |
| { | |
| local_irq_disable(); | |
| sparc_config.init_timers = sun4d_init_timers; | |
| sparc_config.build_device_irq = sun4d_build_device_irq; | |
| sparc_config.clock_rate = SBUS_CLOCK_RATE; | |
| sparc_config.clear_clock_irq = sun4d_clear_clock_irq; | |
| sparc_config.load_profile_irq = sun4d_load_profile_irq; | |
| /* Cannot enable interrupts until OBP ticker is disabled. */ | |
| } |