| /* | |
| * pseries CPU Hotplug infrastructure. | |
| * | |
| * Split out from arch/powerpc/platforms/pseries/setup.c | |
| * arch/powerpc/kernel/rtas.c, and arch/powerpc/platforms/pseries/smp.c | |
| * | |
| * Peter Bergner, IBM March 2001. | |
| * Copyright (C) 2001 IBM. | |
| * Dave Engebretsen, Peter Bergner, and | |
| * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com | |
| * Plus various changes from other IBM teams... | |
| * | |
| * Copyright (C) 2006 Michael Ellerman, IBM Corporation | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| */ | |
| #define pr_fmt(fmt) "pseries-hotplug-cpu: " fmt | |
| #include <linux/kernel.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/delay.h> | |
| #include <linux/sched.h> /* for idle_task_exit */ | |
| #include <linux/sched/hotplug.h> | |
| #include <linux/cpu.h> | |
| #include <linux/of.h> | |
| #include <linux/slab.h> | |
| #include <asm/prom.h> | |
| #include <asm/rtas.h> | |
| #include <asm/firmware.h> | |
| #include <asm/machdep.h> | |
| #include <asm/vdso_datapage.h> | |
| #include <asm/xics.h> | |
| #include <asm/xive.h> | |
| #include <asm/plpar_wrappers.h> | |
| #include <asm/topology.h> | |
| #include "pseries.h" | |
| #include "offline_states.h" | |
| /* This version can't take the spinlock, because it never returns */ | |
| static int rtas_stop_self_token = RTAS_UNKNOWN_SERVICE; | |
| static DEFINE_PER_CPU(enum cpu_state_vals, preferred_offline_state) = | |
| CPU_STATE_OFFLINE; | |
| static DEFINE_PER_CPU(enum cpu_state_vals, current_state) = CPU_STATE_OFFLINE; | |
| static enum cpu_state_vals default_offline_state = CPU_STATE_OFFLINE; | |
| static bool cede_offline_enabled __read_mostly = true; | |
| /* | |
| * Enable/disable cede_offline when available. | |
| */ | |
| static int __init setup_cede_offline(char *str) | |
| { | |
| return (kstrtobool(str, &cede_offline_enabled) == 0); | |
| } | |
| __setup("cede_offline=", setup_cede_offline); | |
| enum cpu_state_vals get_cpu_current_state(int cpu) | |
| { | |
| return per_cpu(current_state, cpu); | |
| } | |
| void set_cpu_current_state(int cpu, enum cpu_state_vals state) | |
| { | |
| per_cpu(current_state, cpu) = state; | |
| } | |
| enum cpu_state_vals get_preferred_offline_state(int cpu) | |
| { | |
| return per_cpu(preferred_offline_state, cpu); | |
| } | |
| void set_preferred_offline_state(int cpu, enum cpu_state_vals state) | |
| { | |
| per_cpu(preferred_offline_state, cpu) = state; | |
| } | |
| void set_default_offline_state(int cpu) | |
| { | |
| per_cpu(preferred_offline_state, cpu) = default_offline_state; | |
| } | |
| static void rtas_stop_self(void) | |
| { | |
| static struct rtas_args args; | |
| local_irq_disable(); | |
| BUG_ON(rtas_stop_self_token == RTAS_UNKNOWN_SERVICE); | |
| printk("cpu %u (hwid %u) Ready to die...\n", | |
| smp_processor_id(), hard_smp_processor_id()); | |
| rtas_call_unlocked(&args, rtas_stop_self_token, 0, 1, NULL); | |
| panic("Alas, I survived.\n"); | |
| } | |
| static void pseries_mach_cpu_die(void) | |
| { | |
| unsigned int cpu = smp_processor_id(); | |
| unsigned int hwcpu = hard_smp_processor_id(); | |
| u8 cede_latency_hint = 0; | |
| local_irq_disable(); | |
| idle_task_exit(); | |
| if (xive_enabled()) | |
| xive_teardown_cpu(); | |
| else | |
| xics_teardown_cpu(); | |
| if (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) { | |
| set_cpu_current_state(cpu, CPU_STATE_INACTIVE); | |
| if (ppc_md.suspend_disable_cpu) | |
| ppc_md.suspend_disable_cpu(); | |
| cede_latency_hint = 2; | |
| get_lppaca()->idle = 1; | |
| if (!lppaca_shared_proc(get_lppaca())) | |
| get_lppaca()->donate_dedicated_cpu = 1; | |
| while (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) { | |
| while (!prep_irq_for_idle()) { | |
| local_irq_enable(); | |
| local_irq_disable(); | |
| } | |
| extended_cede_processor(cede_latency_hint); | |
| } | |
| local_irq_disable(); | |
| if (!lppaca_shared_proc(get_lppaca())) | |
| get_lppaca()->donate_dedicated_cpu = 0; | |
| get_lppaca()->idle = 0; | |
| if (get_preferred_offline_state(cpu) == CPU_STATE_ONLINE) { | |
| unregister_slb_shadow(hwcpu); | |
| hard_irq_disable(); | |
| /* | |
| * Call to start_secondary_resume() will not return. | |
| * Kernel stack will be reset and start_secondary() | |
| * will be called to continue the online operation. | |
| */ | |
| start_secondary_resume(); | |
| } | |
| } | |
| /* Requested state is CPU_STATE_OFFLINE at this point */ | |
| WARN_ON(get_preferred_offline_state(cpu) != CPU_STATE_OFFLINE); | |
| set_cpu_current_state(cpu, CPU_STATE_OFFLINE); | |
| unregister_slb_shadow(hwcpu); | |
| rtas_stop_self(); | |
| /* Should never get here... */ | |
| BUG(); | |
| for(;;); | |
| } | |
| static int pseries_cpu_disable(void) | |
| { | |
| int cpu = smp_processor_id(); | |
| set_cpu_online(cpu, false); | |
| vdso_data->processorCount--; | |
| /*fix boot_cpuid here*/ | |
| if (cpu == boot_cpuid) | |
| boot_cpuid = cpumask_any(cpu_online_mask); | |
| /* FIXME: abstract this to not be platform specific later on */ | |
| if (xive_enabled()) | |
| xive_smp_disable_cpu(); | |
| else | |
| xics_migrate_irqs_away(); | |
| return 0; | |
| } | |
| /* | |
| * pseries_cpu_die: Wait for the cpu to die. | |
| * @cpu: logical processor id of the CPU whose death we're awaiting. | |
| * | |
| * This function is called from the context of the thread which is performing | |
| * the cpu-offline. Here we wait for long enough to allow the cpu in question | |
| * to self-destroy so that the cpu-offline thread can send the CPU_DEAD | |
| * notifications. | |
| * | |
| * OTOH, pseries_mach_cpu_die() is called by the @cpu when it wants to | |
| * self-destruct. | |
| */ | |
| static void pseries_cpu_die(unsigned int cpu) | |
| { | |
| int tries; | |
| int cpu_status = 1; | |
| unsigned int pcpu = get_hard_smp_processor_id(cpu); | |
| if (get_preferred_offline_state(cpu) == CPU_STATE_INACTIVE) { | |
| cpu_status = 1; | |
| for (tries = 0; tries < 5000; tries++) { | |
| if (get_cpu_current_state(cpu) == CPU_STATE_INACTIVE) { | |
| cpu_status = 0; | |
| break; | |
| } | |
| msleep(1); | |
| } | |
| } else if (get_preferred_offline_state(cpu) == CPU_STATE_OFFLINE) { | |
| for (tries = 0; tries < 25; tries++) { | |
| cpu_status = smp_query_cpu_stopped(pcpu); | |
| if (cpu_status == QCSS_STOPPED || | |
| cpu_status == QCSS_HARDWARE_ERROR) | |
| break; | |
| cpu_relax(); | |
| } | |
| } | |
| if (cpu_status != 0) { | |
| printk("Querying DEAD? cpu %i (%i) shows %i\n", | |
| cpu, pcpu, cpu_status); | |
| } | |
| /* Isolation and deallocation are definitely done by | |
| * drslot_chrp_cpu. If they were not they would be | |
| * done here. Change isolate state to Isolate and | |
| * change allocation-state to Unusable. | |
| */ | |
| paca[cpu].cpu_start = 0; | |
| } | |
| /* | |
| * Update cpu_present_mask and paca(s) for a new cpu node. The wrinkle | |
| * here is that a cpu device node may represent up to two logical cpus | |
| * in the SMT case. We must honor the assumption in other code that | |
| * the logical ids for sibling SMT threads x and y are adjacent, such | |
| * that x^1 == y and y^1 == x. | |
| */ | |
| static int pseries_add_processor(struct device_node *np) | |
| { | |
| unsigned int cpu; | |
| cpumask_var_t candidate_mask, tmp; | |
| int err = -ENOSPC, len, nthreads, i; | |
| const __be32 *intserv; | |
| intserv = of_get_property(np, "ibm,ppc-interrupt-server#s", &len); | |
| if (!intserv) | |
| return 0; | |
| zalloc_cpumask_var(&candidate_mask, GFP_KERNEL); | |
| zalloc_cpumask_var(&tmp, GFP_KERNEL); | |
| nthreads = len / sizeof(u32); | |
| for (i = 0; i < nthreads; i++) | |
| cpumask_set_cpu(i, tmp); | |
| cpu_maps_update_begin(); | |
| BUG_ON(!cpumask_subset(cpu_present_mask, cpu_possible_mask)); | |
| /* Get a bitmap of unoccupied slots. */ | |
| cpumask_xor(candidate_mask, cpu_possible_mask, cpu_present_mask); | |
| if (cpumask_empty(candidate_mask)) { | |
| /* If we get here, it most likely means that NR_CPUS is | |
| * less than the partition's max processors setting. | |
| */ | |
| printk(KERN_ERR "Cannot add cpu %pOF; this system configuration" | |
| " supports %d logical cpus.\n", np, | |
| num_possible_cpus()); | |
| goto out_unlock; | |
| } | |
| while (!cpumask_empty(tmp)) | |
| if (cpumask_subset(tmp, candidate_mask)) | |
| /* Found a range where we can insert the new cpu(s) */ | |
| break; | |
| else | |
| cpumask_shift_left(tmp, tmp, nthreads); | |
| if (cpumask_empty(tmp)) { | |
| printk(KERN_ERR "Unable to find space in cpu_present_mask for" | |
| " processor %s with %d thread(s)\n", np->name, | |
| nthreads); | |
| goto out_unlock; | |
| } | |
| for_each_cpu(cpu, tmp) { | |
| BUG_ON(cpu_present(cpu)); | |
| set_cpu_present(cpu, true); | |
| set_hard_smp_processor_id(cpu, be32_to_cpu(*intserv++)); | |
| } | |
| err = 0; | |
| out_unlock: | |
| cpu_maps_update_done(); | |
| free_cpumask_var(candidate_mask); | |
| free_cpumask_var(tmp); | |
| return err; | |
| } | |
| /* | |
| * Update the present map for a cpu node which is going away, and set | |
| * the hard id in the paca(s) to -1 to be consistent with boot time | |
| * convention for non-present cpus. | |
| */ | |
| static void pseries_remove_processor(struct device_node *np) | |
| { | |
| unsigned int cpu; | |
| int len, nthreads, i; | |
| const __be32 *intserv; | |
| u32 thread; | |
| intserv = of_get_property(np, "ibm,ppc-interrupt-server#s", &len); | |
| if (!intserv) | |
| return; | |
| nthreads = len / sizeof(u32); | |
| cpu_maps_update_begin(); | |
| for (i = 0; i < nthreads; i++) { | |
| thread = be32_to_cpu(intserv[i]); | |
| for_each_present_cpu(cpu) { | |
| if (get_hard_smp_processor_id(cpu) != thread) | |
| continue; | |
| BUG_ON(cpu_online(cpu)); | |
| set_cpu_present(cpu, false); | |
| set_hard_smp_processor_id(cpu, -1); | |
| update_numa_cpu_lookup_table(cpu, -1); | |
| break; | |
| } | |
| if (cpu >= nr_cpu_ids) | |
| printk(KERN_WARNING "Could not find cpu to remove " | |
| "with physical id 0x%x\n", thread); | |
| } | |
| cpu_maps_update_done(); | |
| } | |
| static int dlpar_online_cpu(struct device_node *dn) | |
| { | |
| int rc = 0; | |
| unsigned int cpu; | |
| int len, nthreads, i; | |
| const __be32 *intserv; | |
| u32 thread; | |
| intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len); | |
| if (!intserv) | |
| return -EINVAL; | |
| nthreads = len / sizeof(u32); | |
| cpu_maps_update_begin(); | |
| for (i = 0; i < nthreads; i++) { | |
| thread = be32_to_cpu(intserv[i]); | |
| for_each_present_cpu(cpu) { | |
| if (get_hard_smp_processor_id(cpu) != thread) | |
| continue; | |
| BUG_ON(get_cpu_current_state(cpu) | |
| != CPU_STATE_OFFLINE); | |
| cpu_maps_update_done(); | |
| rc = device_online(get_cpu_device(cpu)); | |
| if (rc) | |
| goto out; | |
| cpu_maps_update_begin(); | |
| break; | |
| } | |
| if (cpu == num_possible_cpus()) | |
| printk(KERN_WARNING "Could not find cpu to online " | |
| "with physical id 0x%x\n", thread); | |
| } | |
| cpu_maps_update_done(); | |
| out: | |
| return rc; | |
| } | |
| static bool dlpar_cpu_exists(struct device_node *parent, u32 drc_index) | |
| { | |
| struct device_node *child = NULL; | |
| u32 my_drc_index; | |
| bool found; | |
| int rc; | |
| /* Assume cpu doesn't exist */ | |
| found = false; | |
| for_each_child_of_node(parent, child) { | |
| rc = of_property_read_u32(child, "ibm,my-drc-index", | |
| &my_drc_index); | |
| if (rc) | |
| continue; | |
| if (my_drc_index == drc_index) { | |
| of_node_put(child); | |
| found = true; | |
| break; | |
| } | |
| } | |
| return found; | |
| } | |
| static bool valid_cpu_drc_index(struct device_node *parent, u32 drc_index) | |
| { | |
| bool found = false; | |
| int rc, index; | |
| index = 0; | |
| while (!found) { | |
| u32 drc; | |
| rc = of_property_read_u32_index(parent, "ibm,drc-indexes", | |
| index++, &drc); | |
| if (rc) | |
| break; | |
| if (drc == drc_index) | |
| found = true; | |
| } | |
| return found; | |
| } | |
| static ssize_t dlpar_cpu_add(u32 drc_index) | |
| { | |
| struct device_node *dn, *parent; | |
| int rc, saved_rc; | |
| pr_debug("Attempting to add CPU, drc index: %x\n", drc_index); | |
| parent = of_find_node_by_path("/cpus"); | |
| if (!parent) { | |
| pr_warn("Failed to find CPU root node \"/cpus\"\n"); | |
| return -ENODEV; | |
| } | |
| if (dlpar_cpu_exists(parent, drc_index)) { | |
| of_node_put(parent); | |
| pr_warn("CPU with drc index %x already exists\n", drc_index); | |
| return -EINVAL; | |
| } | |
| if (!valid_cpu_drc_index(parent, drc_index)) { | |
| of_node_put(parent); | |
| pr_warn("Cannot find CPU (drc index %x) to add.\n", drc_index); | |
| return -EINVAL; | |
| } | |
| rc = dlpar_acquire_drc(drc_index); | |
| if (rc) { | |
| pr_warn("Failed to acquire DRC, rc: %d, drc index: %x\n", | |
| rc, drc_index); | |
| of_node_put(parent); | |
| return -EINVAL; | |
| } | |
| dn = dlpar_configure_connector(cpu_to_be32(drc_index), parent); | |
| if (!dn) { | |
| pr_warn("Failed call to configure-connector, drc index: %x\n", | |
| drc_index); | |
| dlpar_release_drc(drc_index); | |
| of_node_put(parent); | |
| return -EINVAL; | |
| } | |
| rc = dlpar_attach_node(dn, parent); | |
| /* Regardless we are done with parent now */ | |
| of_node_put(parent); | |
| if (rc) { | |
| saved_rc = rc; | |
| pr_warn("Failed to attach node %s, rc: %d, drc index: %x\n", | |
| dn->name, rc, drc_index); | |
| rc = dlpar_release_drc(drc_index); | |
| if (!rc) | |
| dlpar_free_cc_nodes(dn); | |
| return saved_rc; | |
| } | |
| rc = dlpar_online_cpu(dn); | |
| if (rc) { | |
| saved_rc = rc; | |
| pr_warn("Failed to online cpu %s, rc: %d, drc index: %x\n", | |
| dn->name, rc, drc_index); | |
| rc = dlpar_detach_node(dn); | |
| if (!rc) | |
| dlpar_release_drc(drc_index); | |
| return saved_rc; | |
| } | |
| pr_debug("Successfully added CPU %s, drc index: %x\n", dn->name, | |
| drc_index); | |
| return rc; | |
| } | |
| static int dlpar_offline_cpu(struct device_node *dn) | |
| { | |
| int rc = 0; | |
| unsigned int cpu; | |
| int len, nthreads, i; | |
| const __be32 *intserv; | |
| u32 thread; | |
| intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", &len); | |
| if (!intserv) | |
| return -EINVAL; | |
| nthreads = len / sizeof(u32); | |
| cpu_maps_update_begin(); | |
| for (i = 0; i < nthreads; i++) { | |
| thread = be32_to_cpu(intserv[i]); | |
| for_each_present_cpu(cpu) { | |
| if (get_hard_smp_processor_id(cpu) != thread) | |
| continue; | |
| if (get_cpu_current_state(cpu) == CPU_STATE_OFFLINE) | |
| break; | |
| if (get_cpu_current_state(cpu) == CPU_STATE_ONLINE) { | |
| set_preferred_offline_state(cpu, | |
| CPU_STATE_OFFLINE); | |
| cpu_maps_update_done(); | |
| rc = device_offline(get_cpu_device(cpu)); | |
| if (rc) | |
| goto out; | |
| cpu_maps_update_begin(); | |
| break; | |
| } | |
| /* | |
| * The cpu is in CPU_STATE_INACTIVE. | |
| * Upgrade it's state to CPU_STATE_OFFLINE. | |
| */ | |
| set_preferred_offline_state(cpu, CPU_STATE_OFFLINE); | |
| BUG_ON(plpar_hcall_norets(H_PROD, thread) | |
| != H_SUCCESS); | |
| __cpu_die(cpu); | |
| break; | |
| } | |
| if (cpu == num_possible_cpus()) | |
| printk(KERN_WARNING "Could not find cpu to offline with physical id 0x%x\n", thread); | |
| } | |
| cpu_maps_update_done(); | |
| out: | |
| return rc; | |
| } | |
| static ssize_t dlpar_cpu_remove(struct device_node *dn, u32 drc_index) | |
| { | |
| int rc; | |
| pr_debug("Attempting to remove CPU %s, drc index: %x\n", | |
| dn->name, drc_index); | |
| rc = dlpar_offline_cpu(dn); | |
| if (rc) { | |
| pr_warn("Failed to offline CPU %s, rc: %d\n", dn->name, rc); | |
| return -EINVAL; | |
| } | |
| rc = dlpar_release_drc(drc_index); | |
| if (rc) { | |
| pr_warn("Failed to release drc (%x) for CPU %s, rc: %d\n", | |
| drc_index, dn->name, rc); | |
| dlpar_online_cpu(dn); | |
| return rc; | |
| } | |
| rc = dlpar_detach_node(dn); | |
| if (rc) { | |
| int saved_rc = rc; | |
| pr_warn("Failed to detach CPU %s, rc: %d", dn->name, rc); | |
| rc = dlpar_acquire_drc(drc_index); | |
| if (!rc) | |
| dlpar_online_cpu(dn); | |
| return saved_rc; | |
| } | |
| pr_debug("Successfully removed CPU, drc index: %x\n", drc_index); | |
| return 0; | |
| } | |
| static struct device_node *cpu_drc_index_to_dn(u32 drc_index) | |
| { | |
| struct device_node *dn; | |
| u32 my_index; | |
| int rc; | |
| for_each_node_by_type(dn, "cpu") { | |
| rc = of_property_read_u32(dn, "ibm,my-drc-index", &my_index); | |
| if (rc) | |
| continue; | |
| if (my_index == drc_index) | |
| break; | |
| } | |
| return dn; | |
| } | |
| static int dlpar_cpu_remove_by_index(u32 drc_index) | |
| { | |
| struct device_node *dn; | |
| int rc; | |
| dn = cpu_drc_index_to_dn(drc_index); | |
| if (!dn) { | |
| pr_warn("Cannot find CPU (drc index %x) to remove\n", | |
| drc_index); | |
| return -ENODEV; | |
| } | |
| rc = dlpar_cpu_remove(dn, drc_index); | |
| of_node_put(dn); | |
| return rc; | |
| } | |
| static int find_dlpar_cpus_to_remove(u32 *cpu_drcs, int cpus_to_remove) | |
| { | |
| struct device_node *dn; | |
| int cpus_found = 0; | |
| int rc; | |
| /* We want to find cpus_to_remove + 1 CPUs to ensure we do not | |
| * remove the last CPU. | |
| */ | |
| for_each_node_by_type(dn, "cpu") { | |
| cpus_found++; | |
| if (cpus_found > cpus_to_remove) { | |
| of_node_put(dn); | |
| break; | |
| } | |
| /* Note that cpus_found is always 1 ahead of the index | |
| * into the cpu_drcs array, so we use cpus_found - 1 | |
| */ | |
| rc = of_property_read_u32(dn, "ibm,my-drc-index", | |
| &cpu_drcs[cpus_found - 1]); | |
| if (rc) { | |
| pr_warn("Error occurred getting drc-index for %s\n", | |
| dn->name); | |
| of_node_put(dn); | |
| return -1; | |
| } | |
| } | |
| if (cpus_found < cpus_to_remove) { | |
| pr_warn("Failed to find enough CPUs (%d of %d) to remove\n", | |
| cpus_found, cpus_to_remove); | |
| } else if (cpus_found == cpus_to_remove) { | |
| pr_warn("Cannot remove all CPUs\n"); | |
| } | |
| return cpus_found; | |
| } | |
| static int dlpar_cpu_remove_by_count(u32 cpus_to_remove) | |
| { | |
| u32 *cpu_drcs; | |
| int cpus_found; | |
| int cpus_removed = 0; | |
| int i, rc; | |
| pr_debug("Attempting to hot-remove %d CPUs\n", cpus_to_remove); | |
| cpu_drcs = kcalloc(cpus_to_remove, sizeof(*cpu_drcs), GFP_KERNEL); | |
| if (!cpu_drcs) | |
| return -EINVAL; | |
| cpus_found = find_dlpar_cpus_to_remove(cpu_drcs, cpus_to_remove); | |
| if (cpus_found <= cpus_to_remove) { | |
| kfree(cpu_drcs); | |
| return -EINVAL; | |
| } | |
| for (i = 0; i < cpus_to_remove; i++) { | |
| rc = dlpar_cpu_remove_by_index(cpu_drcs[i]); | |
| if (rc) | |
| break; | |
| cpus_removed++; | |
| } | |
| if (cpus_removed != cpus_to_remove) { | |
| pr_warn("CPU hot-remove failed, adding back removed CPUs\n"); | |
| for (i = 0; i < cpus_removed; i++) | |
| dlpar_cpu_add(cpu_drcs[i]); | |
| rc = -EINVAL; | |
| } else { | |
| rc = 0; | |
| } | |
| kfree(cpu_drcs); | |
| return rc; | |
| } | |
| static int find_dlpar_cpus_to_add(u32 *cpu_drcs, u32 cpus_to_add) | |
| { | |
| struct device_node *parent; | |
| int cpus_found = 0; | |
| int index, rc; | |
| parent = of_find_node_by_path("/cpus"); | |
| if (!parent) { | |
| pr_warn("Could not find CPU root node in device tree\n"); | |
| kfree(cpu_drcs); | |
| return -1; | |
| } | |
| /* Search the ibm,drc-indexes array for possible CPU drcs to | |
| * add. Note that the format of the ibm,drc-indexes array is | |
| * the number of entries in the array followed by the array | |
| * of drc values so we start looking at index = 1. | |
| */ | |
| index = 1; | |
| while (cpus_found < cpus_to_add) { | |
| u32 drc; | |
| rc = of_property_read_u32_index(parent, "ibm,drc-indexes", | |
| index++, &drc); | |
| if (rc) | |
| break; | |
| if (dlpar_cpu_exists(parent, drc)) | |
| continue; | |
| cpu_drcs[cpus_found++] = drc; | |
| } | |
| of_node_put(parent); | |
| return cpus_found; | |
| } | |
| static int dlpar_cpu_add_by_count(u32 cpus_to_add) | |
| { | |
| u32 *cpu_drcs; | |
| int cpus_added = 0; | |
| int cpus_found; | |
| int i, rc; | |
| pr_debug("Attempting to hot-add %d CPUs\n", cpus_to_add); | |
| cpu_drcs = kcalloc(cpus_to_add, sizeof(*cpu_drcs), GFP_KERNEL); | |
| if (!cpu_drcs) | |
| return -EINVAL; | |
| cpus_found = find_dlpar_cpus_to_add(cpu_drcs, cpus_to_add); | |
| if (cpus_found < cpus_to_add) { | |
| pr_warn("Failed to find enough CPUs (%d of %d) to add\n", | |
| cpus_found, cpus_to_add); | |
| kfree(cpu_drcs); | |
| return -EINVAL; | |
| } | |
| for (i = 0; i < cpus_to_add; i++) { | |
| rc = dlpar_cpu_add(cpu_drcs[i]); | |
| if (rc) | |
| break; | |
| cpus_added++; | |
| } | |
| if (cpus_added < cpus_to_add) { | |
| pr_warn("CPU hot-add failed, removing any added CPUs\n"); | |
| for (i = 0; i < cpus_added; i++) | |
| dlpar_cpu_remove_by_index(cpu_drcs[i]); | |
| rc = -EINVAL; | |
| } else { | |
| rc = 0; | |
| } | |
| kfree(cpu_drcs); | |
| return rc; | |
| } | |
| int dlpar_cpu_readd(int cpu) | |
| { | |
| struct device_node *dn; | |
| struct device *dev; | |
| u32 drc_index; | |
| int rc; | |
| dev = get_cpu_device(cpu); | |
| dn = dev->of_node; | |
| rc = of_property_read_u32(dn, "ibm,my-drc-index", &drc_index); | |
| rc = dlpar_cpu_remove_by_index(drc_index); | |
| if (!rc) | |
| rc = dlpar_cpu_add(drc_index); | |
| return rc; | |
| } | |
| int dlpar_cpu(struct pseries_hp_errorlog *hp_elog) | |
| { | |
| u32 count, drc_index; | |
| int rc; | |
| count = hp_elog->_drc_u.drc_count; | |
| drc_index = hp_elog->_drc_u.drc_index; | |
| lock_device_hotplug(); | |
| switch (hp_elog->action) { | |
| case PSERIES_HP_ELOG_ACTION_REMOVE: | |
| if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_COUNT) | |
| rc = dlpar_cpu_remove_by_count(count); | |
| else if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_INDEX) | |
| rc = dlpar_cpu_remove_by_index(drc_index); | |
| else | |
| rc = -EINVAL; | |
| break; | |
| case PSERIES_HP_ELOG_ACTION_ADD: | |
| if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_COUNT) | |
| rc = dlpar_cpu_add_by_count(count); | |
| else if (hp_elog->id_type == PSERIES_HP_ELOG_ID_DRC_INDEX) | |
| rc = dlpar_cpu_add(drc_index); | |
| else | |
| rc = -EINVAL; | |
| break; | |
| default: | |
| pr_err("Invalid action (%d) specified\n", hp_elog->action); | |
| rc = -EINVAL; | |
| break; | |
| } | |
| unlock_device_hotplug(); | |
| return rc; | |
| } | |
| #ifdef CONFIG_ARCH_CPU_PROBE_RELEASE | |
| static ssize_t dlpar_cpu_probe(const char *buf, size_t count) | |
| { | |
| u32 drc_index; | |
| int rc; | |
| rc = kstrtou32(buf, 0, &drc_index); | |
| if (rc) | |
| return -EINVAL; | |
| rc = dlpar_cpu_add(drc_index); | |
| return rc ? rc : count; | |
| } | |
| static ssize_t dlpar_cpu_release(const char *buf, size_t count) | |
| { | |
| struct device_node *dn; | |
| u32 drc_index; | |
| int rc; | |
| dn = of_find_node_by_path(buf); | |
| if (!dn) | |
| return -EINVAL; | |
| rc = of_property_read_u32(dn, "ibm,my-drc-index", &drc_index); | |
| if (rc) { | |
| of_node_put(dn); | |
| return -EINVAL; | |
| } | |
| rc = dlpar_cpu_remove(dn, drc_index); | |
| of_node_put(dn); | |
| return rc ? rc : count; | |
| } | |
| #endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */ | |
| static int pseries_smp_notifier(struct notifier_block *nb, | |
| unsigned long action, void *data) | |
| { | |
| struct of_reconfig_data *rd = data; | |
| int err = 0; | |
| switch (action) { | |
| case OF_RECONFIG_ATTACH_NODE: | |
| err = pseries_add_processor(rd->dn); | |
| break; | |
| case OF_RECONFIG_DETACH_NODE: | |
| pseries_remove_processor(rd->dn); | |
| break; | |
| } | |
| return notifier_from_errno(err); | |
| } | |
| static struct notifier_block pseries_smp_nb = { | |
| .notifier_call = pseries_smp_notifier, | |
| }; | |
| #define MAX_CEDE_LATENCY_LEVELS 4 | |
| #define CEDE_LATENCY_PARAM_LENGTH 10 | |
| #define CEDE_LATENCY_PARAM_MAX_LENGTH \ | |
| (MAX_CEDE_LATENCY_LEVELS * CEDE_LATENCY_PARAM_LENGTH * sizeof(char)) | |
| #define CEDE_LATENCY_TOKEN 45 | |
| static char cede_parameters[CEDE_LATENCY_PARAM_MAX_LENGTH]; | |
| static int parse_cede_parameters(void) | |
| { | |
| memset(cede_parameters, 0, CEDE_LATENCY_PARAM_MAX_LENGTH); | |
| return rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1, | |
| NULL, | |
| CEDE_LATENCY_TOKEN, | |
| __pa(cede_parameters), | |
| CEDE_LATENCY_PARAM_MAX_LENGTH); | |
| } | |
| static int __init pseries_cpu_hotplug_init(void) | |
| { | |
| int cpu; | |
| int qcss_tok; | |
| #ifdef CONFIG_ARCH_CPU_PROBE_RELEASE | |
| ppc_md.cpu_probe = dlpar_cpu_probe; | |
| ppc_md.cpu_release = dlpar_cpu_release; | |
| #endif /* CONFIG_ARCH_CPU_PROBE_RELEASE */ | |
| rtas_stop_self_token = rtas_token("stop-self"); | |
| qcss_tok = rtas_token("query-cpu-stopped-state"); | |
| if (rtas_stop_self_token == RTAS_UNKNOWN_SERVICE || | |
| qcss_tok == RTAS_UNKNOWN_SERVICE) { | |
| printk(KERN_INFO "CPU Hotplug not supported by firmware " | |
| "- disabling.\n"); | |
| return 0; | |
| } | |
| ppc_md.cpu_die = pseries_mach_cpu_die; | |
| smp_ops->cpu_disable = pseries_cpu_disable; | |
| smp_ops->cpu_die = pseries_cpu_die; | |
| /* Processors can be added/removed only on LPAR */ | |
| if (firmware_has_feature(FW_FEATURE_LPAR)) { | |
| of_reconfig_notifier_register(&pseries_smp_nb); | |
| cpu_maps_update_begin(); | |
| if (cede_offline_enabled && parse_cede_parameters() == 0) { | |
| default_offline_state = CPU_STATE_INACTIVE; | |
| for_each_online_cpu(cpu) | |
| set_default_offline_state(cpu); | |
| } | |
| cpu_maps_update_done(); | |
| } | |
| return 0; | |
| } | |
| machine_arch_initcall(pseries, pseries_cpu_hotplug_init); |