| /* | |
| * Copyright (C) 2006-2007 PA Semi, Inc | |
| * | |
| * Authors: Kip Walker, PA Semi | |
| * Olof Johansson, PA Semi | |
| * | |
| * Maintained by: Olof Johansson <olof@lixom.net> | |
| * | |
| * Based on arch/powerpc/platforms/maple/setup.c | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| * | |
| * You should have received a copy of the GNU General Public License | |
| * along with this program; if not, write to the Free Software | |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA | |
| */ | |
| #include <linux/errno.h> | |
| #include <linux/kernel.h> | |
| #include <linux/delay.h> | |
| #include <linux/console.h> | |
| #include <linux/export.h> | |
| #include <linux/pci.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/gfp.h> | |
| #include <asm/prom.h> | |
| #include <asm/iommu.h> | |
| #include <asm/machdep.h> | |
| #include <asm/mpic.h> | |
| #include <asm/smp.h> | |
| #include <asm/time.h> | |
| #include <asm/mmu.h> | |
| #include <asm/debug.h> | |
| #include <pcmcia/ss.h> | |
| #include <pcmcia/cistpl.h> | |
| #include <pcmcia/ds.h> | |
| #include "pasemi.h" | |
| /* SDC reset register, must be pre-mapped at reset time */ | |
| static void __iomem *reset_reg; | |
| /* Various error status registers, must be pre-mapped at MCE time */ | |
| #define MAX_MCE_REGS 32 | |
| struct mce_regs { | |
| char *name; | |
| void __iomem *addr; | |
| }; | |
| static struct mce_regs mce_regs[MAX_MCE_REGS]; | |
| static int num_mce_regs; | |
| static int nmi_virq = 0; | |
| static void __noreturn pas_restart(char *cmd) | |
| { | |
| /* Need to put others cpu in hold loop so they're not sleeping */ | |
| smp_send_stop(); | |
| udelay(10000); | |
| printk("Restarting...\n"); | |
| while (1) | |
| out_le32(reset_reg, 0x6000000); | |
| } | |
| #ifdef CONFIG_SMP | |
| static arch_spinlock_t timebase_lock; | |
| static unsigned long timebase; | |
| static void pas_give_timebase(void) | |
| { | |
| unsigned long flags; | |
| local_irq_save(flags); | |
| hard_irq_disable(); | |
| arch_spin_lock(&timebase_lock); | |
| mtspr(SPRN_TBCTL, TBCTL_FREEZE); | |
| isync(); | |
| timebase = get_tb(); | |
| arch_spin_unlock(&timebase_lock); | |
| while (timebase) | |
| barrier(); | |
| mtspr(SPRN_TBCTL, TBCTL_RESTART); | |
| local_irq_restore(flags); | |
| } | |
| static void pas_take_timebase(void) | |
| { | |
| while (!timebase) | |
| smp_rmb(); | |
| arch_spin_lock(&timebase_lock); | |
| set_tb(timebase >> 32, timebase & 0xffffffff); | |
| timebase = 0; | |
| arch_spin_unlock(&timebase_lock); | |
| } | |
| static struct smp_ops_t pas_smp_ops = { | |
| .probe = smp_mpic_probe, | |
| .message_pass = smp_mpic_message_pass, | |
| .kick_cpu = smp_generic_kick_cpu, | |
| .setup_cpu = smp_mpic_setup_cpu, | |
| .give_timebase = pas_give_timebase, | |
| .take_timebase = pas_take_timebase, | |
| }; | |
| #endif /* CONFIG_SMP */ | |
| static void __init pas_setup_arch(void) | |
| { | |
| #ifdef CONFIG_SMP | |
| /* Setup SMP callback */ | |
| smp_ops = &pas_smp_ops; | |
| #endif | |
| /* Lookup PCI hosts */ | |
| pas_pci_init(); | |
| #ifdef CONFIG_DUMMY_CONSOLE | |
| conswitchp = &dummy_con; | |
| #endif | |
| /* Remap SDC register for doing reset */ | |
| /* XXXOJN This should maybe come out of the device tree */ | |
| reset_reg = ioremap(0xfc101100, 4); | |
| } | |
| static int __init pas_setup_mce_regs(void) | |
| { | |
| struct pci_dev *dev; | |
| int reg; | |
| /* Remap various SoC status registers for use by the MCE handler */ | |
| reg = 0; | |
| dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, NULL); | |
| while (dev && reg < MAX_MCE_REGS) { | |
| mce_regs[reg].name = kasprintf(GFP_KERNEL, | |
| "mc%d_mcdebug_errsta", reg); | |
| mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x730); | |
| dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa00a, dev); | |
| reg++; | |
| } | |
| dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL); | |
| if (dev && reg+4 < MAX_MCE_REGS) { | |
| mce_regs[reg].name = "iobdbg_IntStatus1"; | |
| mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x438); | |
| reg++; | |
| mce_regs[reg].name = "iobdbg_IOCTbusIntDbgReg"; | |
| mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x454); | |
| reg++; | |
| mce_regs[reg].name = "iobiom_IntStatus"; | |
| mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc10); | |
| reg++; | |
| mce_regs[reg].name = "iobiom_IntDbgReg"; | |
| mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0xc1c); | |
| reg++; | |
| } | |
| dev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa009, NULL); | |
| if (dev && reg+2 < MAX_MCE_REGS) { | |
| mce_regs[reg].name = "l2csts_IntStatus"; | |
| mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x200); | |
| reg++; | |
| mce_regs[reg].name = "l2csts_Cnt"; | |
| mce_regs[reg].addr = pasemi_pci_getcfgaddr(dev, 0x214); | |
| reg++; | |
| } | |
| num_mce_regs = reg; | |
| return 0; | |
| } | |
| machine_device_initcall(pasemi, pas_setup_mce_regs); | |
| static __init void pas_init_IRQ(void) | |
| { | |
| struct device_node *np; | |
| struct device_node *root, *mpic_node; | |
| unsigned long openpic_addr; | |
| const unsigned int *opprop; | |
| int naddr, opplen; | |
| int mpic_flags; | |
| const unsigned int *nmiprop; | |
| struct mpic *mpic; | |
| mpic_node = NULL; | |
| for_each_node_by_type(np, "interrupt-controller") | |
| if (of_device_is_compatible(np, "open-pic")) { | |
| mpic_node = np; | |
| break; | |
| } | |
| if (!mpic_node) | |
| for_each_node_by_type(np, "open-pic") { | |
| mpic_node = np; | |
| break; | |
| } | |
| if (!mpic_node) { | |
| printk(KERN_ERR | |
| "Failed to locate the MPIC interrupt controller\n"); | |
| return; | |
| } | |
| /* Find address list in /platform-open-pic */ | |
| root = of_find_node_by_path("/"); | |
| naddr = of_n_addr_cells(root); | |
| opprop = of_get_property(root, "platform-open-pic", &opplen); | |
| if (!opprop) { | |
| printk(KERN_ERR "No platform-open-pic property.\n"); | |
| of_node_put(root); | |
| return; | |
| } | |
| openpic_addr = of_read_number(opprop, naddr); | |
| printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr); | |
| mpic_flags = MPIC_LARGE_VECTORS | MPIC_NO_BIAS | MPIC_NO_RESET; | |
| nmiprop = of_get_property(mpic_node, "nmi-source", NULL); | |
| if (nmiprop) | |
| mpic_flags |= MPIC_ENABLE_MCK; | |
| mpic = mpic_alloc(mpic_node, openpic_addr, | |
| mpic_flags, 0, 0, "PASEMI-OPIC"); | |
| BUG_ON(!mpic); | |
| mpic_assign_isu(mpic, 0, mpic->paddr + 0x10000); | |
| mpic_init(mpic); | |
| /* The NMI/MCK source needs to be prio 15 */ | |
| if (nmiprop) { | |
| nmi_virq = irq_create_mapping(NULL, *nmiprop); | |
| mpic_irq_set_priority(nmi_virq, 15); | |
| irq_set_irq_type(nmi_virq, IRQ_TYPE_EDGE_RISING); | |
| mpic_unmask_irq(irq_get_irq_data(nmi_virq)); | |
| } | |
| of_node_put(mpic_node); | |
| of_node_put(root); | |
| } | |
| static void __init pas_progress(char *s, unsigned short hex) | |
| { | |
| printk("[%04x] : %s\n", hex, s ? s : ""); | |
| } | |
| static int pas_machine_check_handler(struct pt_regs *regs) | |
| { | |
| int cpu = smp_processor_id(); | |
| unsigned long srr0, srr1, dsisr; | |
| int dump_slb = 0; | |
| int i; | |
| srr0 = regs->nip; | |
| srr1 = regs->msr; | |
| if (nmi_virq && mpic_get_mcirq() == nmi_virq) { | |
| printk(KERN_ERR "NMI delivered\n"); | |
| debugger(regs); | |
| mpic_end_irq(irq_get_irq_data(nmi_virq)); | |
| goto out; | |
| } | |
| dsisr = mfspr(SPRN_DSISR); | |
| printk(KERN_ERR "Machine Check on CPU %d\n", cpu); | |
| printk(KERN_ERR "SRR0 0x%016lx SRR1 0x%016lx\n", srr0, srr1); | |
| printk(KERN_ERR "DSISR 0x%016lx DAR 0x%016lx\n", dsisr, regs->dar); | |
| printk(KERN_ERR "BER 0x%016lx MER 0x%016lx\n", mfspr(SPRN_PA6T_BER), | |
| mfspr(SPRN_PA6T_MER)); | |
| printk(KERN_ERR "IER 0x%016lx DER 0x%016lx\n", mfspr(SPRN_PA6T_IER), | |
| mfspr(SPRN_PA6T_DER)); | |
| printk(KERN_ERR "Cause:\n"); | |
| if (srr1 & 0x200000) | |
| printk(KERN_ERR "Signalled by SDC\n"); | |
| if (srr1 & 0x100000) { | |
| printk(KERN_ERR "Load/Store detected error:\n"); | |
| if (dsisr & 0x8000) | |
| printk(KERN_ERR "D-cache ECC double-bit error or bus error\n"); | |
| if (dsisr & 0x4000) | |
| printk(KERN_ERR "LSU snoop response error\n"); | |
| if (dsisr & 0x2000) { | |
| printk(KERN_ERR "MMU SLB multi-hit or invalid B field\n"); | |
| dump_slb = 1; | |
| } | |
| if (dsisr & 0x1000) | |
| printk(KERN_ERR "Recoverable Duptags\n"); | |
| if (dsisr & 0x800) | |
| printk(KERN_ERR "Recoverable D-cache parity error count overflow\n"); | |
| if (dsisr & 0x400) | |
| printk(KERN_ERR "TLB parity error count overflow\n"); | |
| } | |
| if (srr1 & 0x80000) | |
| printk(KERN_ERR "Bus Error\n"); | |
| if (srr1 & 0x40000) { | |
| printk(KERN_ERR "I-side SLB multiple hit\n"); | |
| dump_slb = 1; | |
| } | |
| if (srr1 & 0x20000) | |
| printk(KERN_ERR "I-cache parity error hit\n"); | |
| if (num_mce_regs == 0) | |
| printk(KERN_ERR "No MCE registers mapped yet, can't dump\n"); | |
| else | |
| printk(KERN_ERR "SoC debug registers:\n"); | |
| for (i = 0; i < num_mce_regs; i++) | |
| printk(KERN_ERR "%s: 0x%08x\n", mce_regs[i].name, | |
| in_le32(mce_regs[i].addr)); | |
| if (dump_slb) { | |
| unsigned long e, v; | |
| int i; | |
| printk(KERN_ERR "slb contents:\n"); | |
| for (i = 0; i < mmu_slb_size; i++) { | |
| asm volatile("slbmfee %0,%1" : "=r" (e) : "r" (i)); | |
| asm volatile("slbmfev %0,%1" : "=r" (v) : "r" (i)); | |
| printk(KERN_ERR "%02d %016lx %016lx\n", i, e, v); | |
| } | |
| } | |
| out: | |
| /* SRR1[62] is from MSR[62] if recoverable, so pass that back */ | |
| return !!(srr1 & 0x2); | |
| } | |
| #ifdef CONFIG_PCMCIA | |
| static int pcmcia_notify(struct notifier_block *nb, unsigned long action, | |
| void *data) | |
| { | |
| struct device *dev = data; | |
| struct device *parent; | |
| struct pcmcia_device *pdev = to_pcmcia_dev(dev); | |
| /* We are only intereted in device addition */ | |
| if (action != BUS_NOTIFY_ADD_DEVICE) | |
| return 0; | |
| parent = pdev->socket->dev.parent; | |
| /* We know electra_cf devices will always have of_node set, since | |
| * electra_cf is an of_platform driver. | |
| */ | |
| if (!parent->of_node) | |
| return 0; | |
| if (!of_device_is_compatible(parent->of_node, "electra-cf")) | |
| return 0; | |
| /* We use the direct ops for localbus */ | |
| dev->dma_ops = &dma_direct_ops; | |
| return 0; | |
| } | |
| static struct notifier_block pcmcia_notifier = { | |
| .notifier_call = pcmcia_notify, | |
| }; | |
| static inline void pasemi_pcmcia_init(void) | |
| { | |
| extern struct bus_type pcmcia_bus_type; | |
| bus_register_notifier(&pcmcia_bus_type, &pcmcia_notifier); | |
| } | |
| #else | |
| static inline void pasemi_pcmcia_init(void) | |
| { | |
| } | |
| #endif | |
| static const struct of_device_id pasemi_bus_ids[] = { | |
| /* Unfortunately needed for legacy firmwares */ | |
| { .type = "localbus", }, | |
| { .type = "sdc", }, | |
| /* These are the proper entries, which newer firmware uses */ | |
| { .compatible = "pasemi,localbus", }, | |
| { .compatible = "pasemi,sdc", }, | |
| {}, | |
| }; | |
| static int __init pasemi_publish_devices(void) | |
| { | |
| pasemi_pcmcia_init(); | |
| /* Publish OF platform devices for SDC and other non-PCI devices */ | |
| of_platform_bus_probe(NULL, pasemi_bus_ids, NULL); | |
| return 0; | |
| } | |
| machine_device_initcall(pasemi, pasemi_publish_devices); | |
| /* | |
| * Called very early, MMU is off, device-tree isn't unflattened | |
| */ | |
| static int __init pas_probe(void) | |
| { | |
| if (!of_machine_is_compatible("PA6T-1682M") && | |
| !of_machine_is_compatible("pasemi,pwrficient")) | |
| return 0; | |
| iommu_init_early_pasemi(); | |
| return 1; | |
| } | |
| define_machine(pasemi) { | |
| .name = "PA Semi PWRficient", | |
| .probe = pas_probe, | |
| .setup_arch = pas_setup_arch, | |
| .init_IRQ = pas_init_IRQ, | |
| .get_irq = mpic_get_irq, | |
| .restart = pas_restart, | |
| .get_boot_time = pas_get_boot_time, | |
| .calibrate_decr = generic_calibrate_decr, | |
| .progress = pas_progress, | |
| .machine_check_exception = pas_machine_check_handler, | |
| }; |