| /* MN10300 Process tracing | |
| * | |
| * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. | |
| * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. | |
| * Modified by David Howells (dhowells@redhat.com) | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public Licence | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the Licence, or (at your option) any later version. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/sched.h> | |
| #include <linux/sched/task_stack.h> | |
| #include <linux/mm.h> | |
| #include <linux/smp.h> | |
| #include <linux/errno.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/user.h> | |
| #include <linux/regset.h> | |
| #include <linux/elf.h> | |
| #include <linux/tracehook.h> | |
| #include <linux/uaccess.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/processor.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/fpu.h> | |
| #include <asm/asm-offsets.h> | |
| /* | |
| * translate ptrace register IDs into struct pt_regs offsets | |
| */ | |
| static const u8 ptrace_regid_to_frame[] = { | |
| [PT_A3 << 2] = REG_A3, | |
| [PT_A2 << 2] = REG_A2, | |
| [PT_D3 << 2] = REG_D3, | |
| [PT_D2 << 2] = REG_D2, | |
| [PT_MCVF << 2] = REG_MCVF, | |
| [PT_MCRL << 2] = REG_MCRL, | |
| [PT_MCRH << 2] = REG_MCRH, | |
| [PT_MDRQ << 2] = REG_MDRQ, | |
| [PT_E1 << 2] = REG_E1, | |
| [PT_E0 << 2] = REG_E0, | |
| [PT_E7 << 2] = REG_E7, | |
| [PT_E6 << 2] = REG_E6, | |
| [PT_E5 << 2] = REG_E5, | |
| [PT_E4 << 2] = REG_E4, | |
| [PT_E3 << 2] = REG_E3, | |
| [PT_E2 << 2] = REG_E2, | |
| [PT_SP << 2] = REG_SP, | |
| [PT_LAR << 2] = REG_LAR, | |
| [PT_LIR << 2] = REG_LIR, | |
| [PT_MDR << 2] = REG_MDR, | |
| [PT_A1 << 2] = REG_A1, | |
| [PT_A0 << 2] = REG_A0, | |
| [PT_D1 << 2] = REG_D1, | |
| [PT_D0 << 2] = REG_D0, | |
| [PT_ORIG_D0 << 2] = REG_ORIG_D0, | |
| [PT_EPSW << 2] = REG_EPSW, | |
| [PT_PC << 2] = REG_PC, | |
| }; | |
| static inline int get_stack_long(struct task_struct *task, int offset) | |
| { | |
| return *(unsigned long *) | |
| ((unsigned long) task->thread.uregs + offset); | |
| } | |
| static inline | |
| int put_stack_long(struct task_struct *task, int offset, unsigned long data) | |
| { | |
| unsigned long stack; | |
| stack = (unsigned long) task->thread.uregs + offset; | |
| *(unsigned long *) stack = data; | |
| return 0; | |
| } | |
| /* | |
| * retrieve the contents of MN10300 userspace general registers | |
| */ | |
| static int genregs_get(struct task_struct *target, | |
| const struct user_regset *regset, | |
| unsigned int pos, unsigned int count, | |
| void *kbuf, void __user *ubuf) | |
| { | |
| const struct pt_regs *regs = task_pt_regs(target); | |
| int ret; | |
| /* we need to skip regs->next */ | |
| ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, | |
| regs, 0, PT_ORIG_D0 * sizeof(long)); | |
| if (ret < 0) | |
| return ret; | |
| ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, | |
| ®s->orig_d0, PT_ORIG_D0 * sizeof(long), | |
| NR_PTREGS * sizeof(long)); | |
| if (ret < 0) | |
| return ret; | |
| return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, | |
| NR_PTREGS * sizeof(long), -1); | |
| } | |
| /* | |
| * update the contents of the MN10300 userspace general registers | |
| */ | |
| static int genregs_set(struct task_struct *target, | |
| const struct user_regset *regset, | |
| unsigned int pos, unsigned int count, | |
| const void *kbuf, const void __user *ubuf) | |
| { | |
| struct pt_regs *regs = task_pt_regs(target); | |
| unsigned long tmp; | |
| int ret; | |
| /* we need to skip regs->next */ | |
| ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, | |
| regs, 0, PT_ORIG_D0 * sizeof(long)); | |
| if (ret < 0) | |
| return ret; | |
| ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, | |
| ®s->orig_d0, PT_ORIG_D0 * sizeof(long), | |
| PT_EPSW * sizeof(long)); | |
| if (ret < 0) | |
| return ret; | |
| /* we need to mask off changes to EPSW */ | |
| tmp = regs->epsw; | |
| ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, | |
| &tmp, PT_EPSW * sizeof(long), | |
| PT_PC * sizeof(long)); | |
| tmp &= EPSW_FLAG_V | EPSW_FLAG_C | EPSW_FLAG_N | EPSW_FLAG_Z; | |
| tmp |= regs->epsw & ~(EPSW_FLAG_V | EPSW_FLAG_C | EPSW_FLAG_N | | |
| EPSW_FLAG_Z); | |
| regs->epsw = tmp; | |
| if (ret < 0) | |
| return ret; | |
| /* and finally load the PC */ | |
| ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, | |
| ®s->pc, PT_PC * sizeof(long), | |
| NR_PTREGS * sizeof(long)); | |
| if (ret < 0) | |
| return ret; | |
| return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, | |
| NR_PTREGS * sizeof(long), -1); | |
| } | |
| /* | |
| * retrieve the contents of MN10300 userspace FPU registers | |
| */ | |
| static int fpuregs_get(struct task_struct *target, | |
| const struct user_regset *regset, | |
| unsigned int pos, unsigned int count, | |
| void *kbuf, void __user *ubuf) | |
| { | |
| const struct fpu_state_struct *fpregs = &target->thread.fpu_state; | |
| int ret; | |
| unlazy_fpu(target); | |
| ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, | |
| fpregs, 0, sizeof(*fpregs)); | |
| if (ret < 0) | |
| return ret; | |
| return user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, | |
| sizeof(*fpregs), -1); | |
| } | |
| /* | |
| * update the contents of the MN10300 userspace FPU registers | |
| */ | |
| static int fpuregs_set(struct task_struct *target, | |
| const struct user_regset *regset, | |
| unsigned int pos, unsigned int count, | |
| const void *kbuf, const void __user *ubuf) | |
| { | |
| struct fpu_state_struct fpu_state = target->thread.fpu_state; | |
| int ret; | |
| ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, | |
| &fpu_state, 0, sizeof(fpu_state)); | |
| if (ret < 0) | |
| return ret; | |
| fpu_kill_state(target); | |
| target->thread.fpu_state = fpu_state; | |
| set_using_fpu(target); | |
| return user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, | |
| sizeof(fpu_state), -1); | |
| } | |
| /* | |
| * determine if the FPU registers have actually been used | |
| */ | |
| static int fpuregs_active(struct task_struct *target, | |
| const struct user_regset *regset) | |
| { | |
| return is_using_fpu(target) ? regset->n : 0; | |
| } | |
| /* | |
| * Define the register sets available on the MN10300 under Linux | |
| */ | |
| enum mn10300_regset { | |
| REGSET_GENERAL, | |
| REGSET_FPU, | |
| }; | |
| static const struct user_regset mn10300_regsets[] = { | |
| /* | |
| * General register format is: | |
| * A3, A2, D3, D2, MCVF, MCRL, MCRH, MDRQ | |
| * E1, E0, E7...E2, SP, LAR, LIR, MDR | |
| * A1, A0, D1, D0, ORIG_D0, EPSW, PC | |
| */ | |
| [REGSET_GENERAL] = { | |
| .core_note_type = NT_PRSTATUS, | |
| .n = ELF_NGREG, | |
| .size = sizeof(long), | |
| .align = sizeof(long), | |
| .get = genregs_get, | |
| .set = genregs_set, | |
| }, | |
| /* | |
| * FPU register format is: | |
| * FS0-31, FPCR | |
| */ | |
| [REGSET_FPU] = { | |
| .core_note_type = NT_PRFPREG, | |
| .n = sizeof(struct fpu_state_struct) / sizeof(long), | |
| .size = sizeof(long), | |
| .align = sizeof(long), | |
| .get = fpuregs_get, | |
| .set = fpuregs_set, | |
| .active = fpuregs_active, | |
| }, | |
| }; | |
| static const struct user_regset_view user_mn10300_native_view = { | |
| .name = "mn10300", | |
| .e_machine = EM_MN10300, | |
| .regsets = mn10300_regsets, | |
| .n = ARRAY_SIZE(mn10300_regsets), | |
| }; | |
| const struct user_regset_view *task_user_regset_view(struct task_struct *task) | |
| { | |
| return &user_mn10300_native_view; | |
| } | |
| /* | |
| * set the single-step bit | |
| */ | |
| void user_enable_single_step(struct task_struct *child) | |
| { | |
| #ifndef CONFIG_MN10300_USING_JTAG | |
| struct user *dummy = NULL; | |
| long tmp; | |
| tmp = get_stack_long(child, (unsigned long) &dummy->regs.epsw); | |
| tmp |= EPSW_T; | |
| put_stack_long(child, (unsigned long) &dummy->regs.epsw, tmp); | |
| #endif | |
| } | |
| /* | |
| * make sure the single-step bit is not set | |
| */ | |
| void user_disable_single_step(struct task_struct *child) | |
| { | |
| #ifndef CONFIG_MN10300_USING_JTAG | |
| struct user *dummy = NULL; | |
| long tmp; | |
| tmp = get_stack_long(child, (unsigned long) &dummy->regs.epsw); | |
| tmp &= ~EPSW_T; | |
| put_stack_long(child, (unsigned long) &dummy->regs.epsw, tmp); | |
| #endif | |
| } | |
| void ptrace_disable(struct task_struct *child) | |
| { | |
| user_disable_single_step(child); | |
| } | |
| /* | |
| * handle the arch-specific side of process tracing | |
| */ | |
| long arch_ptrace(struct task_struct *child, long request, | |
| unsigned long addr, unsigned long data) | |
| { | |
| unsigned long tmp; | |
| int ret; | |
| unsigned long __user *datap = (unsigned long __user *) data; | |
| switch (request) { | |
| /* read the word at location addr in the USER area. */ | |
| case PTRACE_PEEKUSR: | |
| ret = -EIO; | |
| if ((addr & 3) || addr > sizeof(struct user) - 3) | |
| break; | |
| tmp = 0; /* Default return condition */ | |
| if (addr < NR_PTREGS << 2) | |
| tmp = get_stack_long(child, | |
| ptrace_regid_to_frame[addr]); | |
| ret = put_user(tmp, datap); | |
| break; | |
| /* write the word at location addr in the USER area */ | |
| case PTRACE_POKEUSR: | |
| ret = -EIO; | |
| if ((addr & 3) || addr > sizeof(struct user) - 3) | |
| break; | |
| ret = 0; | |
| if (addr < NR_PTREGS << 2) | |
| ret = put_stack_long(child, ptrace_regid_to_frame[addr], | |
| data); | |
| break; | |
| case PTRACE_GETREGS: /* Get all integer regs from the child. */ | |
| return copy_regset_to_user(child, &user_mn10300_native_view, | |
| REGSET_GENERAL, | |
| 0, NR_PTREGS * sizeof(long), | |
| datap); | |
| case PTRACE_SETREGS: /* Set all integer regs in the child. */ | |
| return copy_regset_from_user(child, &user_mn10300_native_view, | |
| REGSET_GENERAL, | |
| 0, NR_PTREGS * sizeof(long), | |
| datap); | |
| case PTRACE_GETFPREGS: /* Get the child FPU state. */ | |
| return copy_regset_to_user(child, &user_mn10300_native_view, | |
| REGSET_FPU, | |
| 0, sizeof(struct fpu_state_struct), | |
| datap); | |
| case PTRACE_SETFPREGS: /* Set the child FPU state. */ | |
| return copy_regset_from_user(child, &user_mn10300_native_view, | |
| REGSET_FPU, | |
| 0, sizeof(struct fpu_state_struct), | |
| datap); | |
| default: | |
| ret = ptrace_request(child, request, addr, data); | |
| break; | |
| } | |
| return ret; | |
| } | |
| /* | |
| * handle tracing of system call entry | |
| * - return the revised system call number or ULONG_MAX to cause ENOSYS | |
| */ | |
| asmlinkage unsigned long syscall_trace_entry(struct pt_regs *regs) | |
| { | |
| if (tracehook_report_syscall_entry(regs)) | |
| /* tracing decided this syscall should not happen, so | |
| * We'll return a bogus call number to get an ENOSYS | |
| * error, but leave the original number in | |
| * regs->orig_d0 | |
| */ | |
| return ULONG_MAX; | |
| return regs->orig_d0; | |
| } | |
| /* | |
| * handle tracing of system call exit | |
| */ | |
| asmlinkage void syscall_trace_exit(struct pt_regs *regs) | |
| { | |
| tracehook_report_syscall_exit(regs, 0); | |
| } |