| // SPDX-License-Identifier: GPL-2.0 | |
| /***************************************************************************/ | |
| /* | |
| * pit.c -- Freescale ColdFire PIT timer. Currently this type of | |
| * hardware timer only exists in the Freescale ColdFire | |
| * 5270/5271, 5282 and 5208 CPUs. No doubt newer ColdFire | |
| * family members will probably use it too. | |
| * | |
| * Copyright (C) 1999-2008, Greg Ungerer (gerg@snapgear.com) | |
| * Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com) | |
| */ | |
| /***************************************************************************/ | |
| #include <linux/kernel.h> | |
| #include <linux/sched.h> | |
| #include <linux/param.h> | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/irq.h> | |
| #include <linux/clockchips.h> | |
| #include <asm/machdep.h> | |
| #include <asm/io.h> | |
| #include <asm/coldfire.h> | |
| #include <asm/mcfpit.h> | |
| #include <asm/mcfsim.h> | |
| /***************************************************************************/ | |
| /* | |
| * By default use timer1 as the system clock timer. | |
| */ | |
| #define FREQ ((MCF_CLK / 2) / 64) | |
| #define TA(a) (MCFPIT_BASE1 + (a)) | |
| #define PIT_CYCLES_PER_JIFFY (FREQ / HZ) | |
| static u32 pit_cnt; | |
| /* | |
| * Initialize the PIT timer. | |
| * | |
| * This is also called after resume to bring the PIT into operation again. | |
| */ | |
| static int cf_pit_set_periodic(struct clock_event_device *evt) | |
| { | |
| __raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR)); | |
| __raw_writew(PIT_CYCLES_PER_JIFFY, TA(MCFPIT_PMR)); | |
| __raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | | |
| MCFPIT_PCSR_OVW | MCFPIT_PCSR_RLD | | |
| MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR)); | |
| return 0; | |
| } | |
| static int cf_pit_set_oneshot(struct clock_event_device *evt) | |
| { | |
| __raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR)); | |
| __raw_writew(MCFPIT_PCSR_EN | MCFPIT_PCSR_PIE | | |
| MCFPIT_PCSR_OVW | MCFPIT_PCSR_CLK64, TA(MCFPIT_PCSR)); | |
| return 0; | |
| } | |
| static int cf_pit_shutdown(struct clock_event_device *evt) | |
| { | |
| __raw_writew(MCFPIT_PCSR_DISABLE, TA(MCFPIT_PCSR)); | |
| return 0; | |
| } | |
| /* | |
| * Program the next event in oneshot mode | |
| * | |
| * Delta is given in PIT ticks | |
| */ | |
| static int cf_pit_next_event(unsigned long delta, | |
| struct clock_event_device *evt) | |
| { | |
| __raw_writew(delta, TA(MCFPIT_PMR)); | |
| return 0; | |
| } | |
| struct clock_event_device cf_pit_clockevent = { | |
| .name = "pit", | |
| .features = CLOCK_EVT_FEAT_PERIODIC | | |
| CLOCK_EVT_FEAT_ONESHOT, | |
| .set_state_shutdown = cf_pit_shutdown, | |
| .set_state_periodic = cf_pit_set_periodic, | |
| .set_state_oneshot = cf_pit_set_oneshot, | |
| .set_next_event = cf_pit_next_event, | |
| .shift = 32, | |
| .irq = MCF_IRQ_PIT1, | |
| }; | |
| /***************************************************************************/ | |
| static irqreturn_t pit_tick(int irq, void *dummy) | |
| { | |
| struct clock_event_device *evt = &cf_pit_clockevent; | |
| u16 pcsr; | |
| /* Reset the ColdFire timer */ | |
| pcsr = __raw_readw(TA(MCFPIT_PCSR)); | |
| __raw_writew(pcsr | MCFPIT_PCSR_PIF, TA(MCFPIT_PCSR)); | |
| pit_cnt += PIT_CYCLES_PER_JIFFY; | |
| evt->event_handler(evt); | |
| return IRQ_HANDLED; | |
| } | |
| /***************************************************************************/ | |
| static struct irqaction pit_irq = { | |
| .name = "timer", | |
| .flags = IRQF_TIMER, | |
| .handler = pit_tick, | |
| }; | |
| /***************************************************************************/ | |
| static u64 pit_read_clk(struct clocksource *cs) | |
| { | |
| unsigned long flags; | |
| u32 cycles; | |
| u16 pcntr; | |
| local_irq_save(flags); | |
| pcntr = __raw_readw(TA(MCFPIT_PCNTR)); | |
| cycles = pit_cnt; | |
| local_irq_restore(flags); | |
| return cycles + PIT_CYCLES_PER_JIFFY - pcntr; | |
| } | |
| /***************************************************************************/ | |
| static struct clocksource pit_clk = { | |
| .name = "pit", | |
| .rating = 100, | |
| .read = pit_read_clk, | |
| .mask = CLOCKSOURCE_MASK(32), | |
| }; | |
| /***************************************************************************/ | |
| void hw_timer_init(irq_handler_t handler) | |
| { | |
| cf_pit_clockevent.cpumask = cpumask_of(smp_processor_id()); | |
| cf_pit_clockevent.mult = div_sc(FREQ, NSEC_PER_SEC, 32); | |
| cf_pit_clockevent.max_delta_ns = | |
| clockevent_delta2ns(0xFFFF, &cf_pit_clockevent); | |
| cf_pit_clockevent.max_delta_ticks = 0xFFFF; | |
| cf_pit_clockevent.min_delta_ns = | |
| clockevent_delta2ns(0x3f, &cf_pit_clockevent); | |
| cf_pit_clockevent.min_delta_ticks = 0x3f; | |
| clockevents_register_device(&cf_pit_clockevent); | |
| setup_irq(MCF_IRQ_PIT1, &pit_irq); | |
| clocksource_register_hz(&pit_clk, FREQ); | |
| } | |
| /***************************************************************************/ |