| menu "Platform selection" | |
| config ARCH_ACTIONS | |
| bool "Actions Semi Platforms" | |
| select OWL_TIMER | |
| help | |
| This enables support for the Actions Semiconductor S900 SoC family. | |
| config ARCH_SUNXI | |
| bool "Allwinner sunxi 64-bit SoC Family" | |
| select ARCH_HAS_RESET_CONTROLLER | |
| select GENERIC_IRQ_CHIP | |
| select PINCTRL | |
| select RESET_CONTROLLER | |
| help | |
| This enables support for Allwinner sunxi based SoCs like the A64. | |
| config ARCH_ALPINE | |
| bool "Annapurna Labs Alpine platform" | |
| select ALPINE_MSI if PCI | |
| help | |
| This enables support for the Annapurna Labs Alpine | |
| Soc family. | |
| config ARCH_BCM2835 | |
| bool "Broadcom BCM2835 family" | |
| select TIMER_OF | |
| select GPIOLIB | |
| select PINCTRL | |
| select PINCTRL_BCM2835 | |
| select ARM_AMBA | |
| select ARM_TIMER_SP804 | |
| select HAVE_ARM_ARCH_TIMER | |
| help | |
| This enables support for the Broadcom BCM2837 SoC. | |
| This SoC is used in the Raspberry Pi 3 device. | |
| config ARCH_BCM_IPROC | |
| bool "Broadcom iProc SoC Family" | |
| select COMMON_CLK_IPROC | |
| select GPIOLIB | |
| select PINCTRL | |
| help | |
| This enables support for Broadcom iProc based SoCs | |
| config ARCH_BERLIN | |
| bool "Marvell Berlin SoC Family" | |
| select DW_APB_ICTL | |
| select GPIOLIB | |
| select PINCTRL | |
| help | |
| This enables support for Marvell Berlin SoC Family | |
| config ARCH_BRCMSTB | |
| bool "Broadcom Set-Top-Box SoCs" | |
| select BRCMSTB_L2_IRQ | |
| select GENERIC_IRQ_CHIP | |
| help | |
| This enables support for Broadcom's ARMv8 Set Top Box SoCs | |
| config ARCH_EXYNOS | |
| bool "ARMv8 based Samsung Exynos SoC family" | |
| select COMMON_CLK_SAMSUNG | |
| select EXYNOS_PM_DOMAINS if PM_GENERIC_DOMAINS | |
| select EXYNOS_PMU | |
| select HAVE_S3C2410_WATCHDOG if WATCHDOG | |
| select HAVE_S3C_RTC if RTC_CLASS | |
| select PINCTRL | |
| select PINCTRL_EXYNOS | |
| select SOC_SAMSUNG | |
| help | |
| This enables support for ARMv8 based Samsung Exynos SoC family. | |
| config ARCH_LAYERSCAPE | |
| bool "ARMv8 based Freescale Layerscape SoC family" | |
| select EDAC_SUPPORT | |
| help | |
| This enables support for the Freescale Layerscape SoC family. | |
| config ARCH_LG1K | |
| bool "LG Electronics LG1K SoC Family" | |
| help | |
| This enables support for LG Electronics LG1K SoC Family | |
| config ARCH_HISI | |
| bool "Hisilicon SoC Family" | |
| select ARM_TIMER_SP804 | |
| select HISILICON_IRQ_MBIGEN if PCI | |
| select PINCTRL | |
| help | |
| This enables support for Hisilicon ARMv8 SoC family | |
| config ARCH_MEDIATEK | |
| bool "Mediatek MT65xx & MT81xx ARMv8 SoC" | |
| select ARM_GIC | |
| select PINCTRL | |
| select MTK_TIMER | |
| help | |
| Support for Mediatek MT65xx & MT81xx ARMv8 SoCs | |
| config ARCH_MESON | |
| bool "Amlogic Platforms" | |
| select PINCTRL | |
| select PINCTRL_MESON | |
| select COMMON_CLK_AMLOGIC | |
| select COMMON_CLK_GXBB | |
| help | |
| This enables support for the Amlogic S905 SoCs. | |
| config ARCH_MVEBU | |
| bool "Marvell EBU SoC Family" | |
| select ARMADA_AP806_SYSCON | |
| select ARMADA_CP110_SYSCON | |
| select ARMADA_37XX_CLK | |
| select GPIOLIB | |
| select GPIOLIB_IRQCHIP | |
| select MVEBU_GICP | |
| select MVEBU_ICU | |
| select MVEBU_ODMI | |
| select MVEBU_PIC | |
| select OF_GPIO | |
| select PINCTRL | |
| select PINCTRL_ARMADA_37XX | |
| select PINCTRL_ARMADA_AP806 | |
| select PINCTRL_ARMADA_CP110 | |
| help | |
| This enables support for Marvell EBU familly, including: | |
| - Armada 3700 SoC Family | |
| - Armada 7K SoC Family | |
| - Armada 8K SoC Family | |
| config ARCH_QCOM | |
| bool "Qualcomm Platforms" | |
| select GPIOLIB | |
| select PINCTRL | |
| help | |
| This enables support for the ARMv8 based Qualcomm chipsets. | |
| config ARCH_REALTEK | |
| bool "Realtek Platforms" | |
| help | |
| This enables support for the ARMv8 based Realtek chipsets, | |
| like the RTD1295. | |
| config ARCH_ROCKCHIP | |
| bool "Rockchip Platforms" | |
| select ARCH_HAS_RESET_CONTROLLER | |
| select GPIOLIB | |
| select PINCTRL | |
| select PINCTRL_ROCKCHIP | |
| select PM | |
| select ROCKCHIP_TIMER | |
| help | |
| This enables support for the ARMv8 based Rockchip chipsets, | |
| like the RK3368. | |
| config ARCH_SEATTLE | |
| bool "AMD Seattle SoC Family" | |
| help | |
| This enables support for AMD Seattle SOC Family | |
| config ARCH_SHMOBILE | |
| bool | |
| config ARCH_RENESAS | |
| bool "Renesas SoC Platforms" | |
| select ARCH_SHMOBILE | |
| select PINCTRL | |
| select PM | |
| select PM_GENERIC_DOMAINS | |
| select RENESAS_IRQC | |
| select SOC_BUS | |
| help | |
| This enables support for the ARMv8 based Renesas SoCs. | |
| config ARCH_R8A7795 | |
| bool "Renesas R-Car H3 SoC Platform" | |
| depends on ARCH_RENESAS | |
| help | |
| This enables support for the Renesas R-Car H3 SoC. | |
| config ARCH_R8A7796 | |
| bool "Renesas R-Car M3-W SoC Platform" | |
| depends on ARCH_RENESAS | |
| help | |
| This enables support for the Renesas R-Car M3-W SoC. | |
| config ARCH_R8A77995 | |
| bool "Renesas R-Car D3 SoC Platform" | |
| depends on ARCH_RENESAS | |
| help | |
| This enables support for the Renesas R-Car D3 SoC. | |
| config ARCH_STRATIX10 | |
| bool "Altera's Stratix 10 SoCFPGA Family" | |
| help | |
| This enables support for Altera's Stratix 10 SoCFPGA Family. | |
| config ARCH_TEGRA | |
| bool "NVIDIA Tegra SoC Family" | |
| select ARCH_HAS_RESET_CONTROLLER | |
| select CLKDEV_LOOKUP | |
| select CLKSRC_MMIO | |
| select TIMER_OF | |
| select GENERIC_CLOCKEVENTS | |
| select GPIOLIB | |
| select PINCTRL | |
| select PM | |
| select PM_GENERIC_DOMAINS | |
| select RESET_CONTROLLER | |
| help | |
| This enables support for the NVIDIA Tegra SoC family. | |
| config ARCH_SPRD | |
| bool "Spreadtrum SoC platform" | |
| help | |
| Support for Spreadtrum ARM based SoCs | |
| config ARCH_THUNDER | |
| bool "Cavium Inc. Thunder SoC Family" | |
| help | |
| This enables support for Cavium's Thunder Family of SoCs. | |
| config ARCH_THUNDER2 | |
| bool "Cavium ThunderX2 Server Processors" | |
| select GPIOLIB | |
| help | |
| This enables support for Cavium's ThunderX2 CN99XX family of | |
| server processors. | |
| config ARCH_UNIPHIER | |
| bool "Socionext UniPhier SoC Family" | |
| select ARCH_HAS_RESET_CONTROLLER | |
| select PINCTRL | |
| help | |
| This enables support for Socionext UniPhier SoC family. | |
| config ARCH_VEXPRESS | |
| bool "ARMv8 software model (Versatile Express)" | |
| select COMMON_CLK_VERSATILE | |
| select GPIOLIB | |
| select PM | |
| select PM_GENERIC_DOMAINS | |
| select POWER_RESET_VEXPRESS | |
| select VEXPRESS_CONFIG | |
| help | |
| This enables support for the ARMv8 software model (Versatile | |
| Express). | |
| config ARCH_VULCAN | |
| def_bool n | |
| config ARCH_XGENE | |
| bool "AppliedMicro X-Gene SOC Family" | |
| help | |
| This enables support for AppliedMicro X-Gene SOC Family | |
| config ARCH_ZX | |
| bool "ZTE ZX SoC Family" | |
| select PINCTRL | |
| help | |
| This enables support for ZTE ZX SoC Family | |
| config ARCH_ZYNQMP | |
| bool "Xilinx ZynqMP Family" | |
| help | |
| This enables support for Xilinx ZynqMP Family | |
| endmenu |