|  | /* | 
|  | * kexec.c - kexec_load system call | 
|  | * Copyright (C) 2002-2004 Eric Biederman  <ebiederm@xmission.com> | 
|  | * | 
|  | * This source code is licensed under the GNU General Public License, | 
|  | * Version 2.  See the file COPYING for more details. | 
|  | */ | 
|  |  | 
|  | #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt | 
|  |  | 
|  | #include <linux/capability.h> | 
|  | #include <linux/mm.h> | 
|  | #include <linux/file.h> | 
|  | #include <linux/kexec.h> | 
|  | #include <linux/mutex.h> | 
|  | #include <linux/list.h> | 
|  | #include <linux/syscalls.h> | 
|  | #include <linux/vmalloc.h> | 
|  | #include <linux/slab.h> | 
|  |  | 
|  | #include "kexec_internal.h" | 
|  |  | 
|  | static int copy_user_segment_list(struct kimage *image, | 
|  | unsigned long nr_segments, | 
|  | struct kexec_segment __user *segments) | 
|  | { | 
|  | int ret; | 
|  | size_t segment_bytes; | 
|  |  | 
|  | /* Read in the segments */ | 
|  | image->nr_segments = nr_segments; | 
|  | segment_bytes = nr_segments * sizeof(*segments); | 
|  | ret = copy_from_user(image->segment, segments, segment_bytes); | 
|  | if (ret) | 
|  | ret = -EFAULT; | 
|  |  | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int kimage_alloc_init(struct kimage **rimage, unsigned long entry, | 
|  | unsigned long nr_segments, | 
|  | struct kexec_segment __user *segments, | 
|  | unsigned long flags) | 
|  | { | 
|  | int ret; | 
|  | struct kimage *image; | 
|  | bool kexec_on_panic = flags & KEXEC_ON_CRASH; | 
|  |  | 
|  | if (kexec_on_panic) { | 
|  | /* Verify we have a valid entry point */ | 
|  | if ((entry < phys_to_boot_phys(crashk_res.start)) || | 
|  | (entry > phys_to_boot_phys(crashk_res.end))) | 
|  | return -EADDRNOTAVAIL; | 
|  | } | 
|  |  | 
|  | /* Allocate and initialize a controlling structure */ | 
|  | image = do_kimage_alloc_init(); | 
|  | if (!image) | 
|  | return -ENOMEM; | 
|  |  | 
|  | image->start = entry; | 
|  |  | 
|  | ret = copy_user_segment_list(image, nr_segments, segments); | 
|  | if (ret) | 
|  | goto out_free_image; | 
|  |  | 
|  | if (kexec_on_panic) { | 
|  | /* Enable special crash kernel control page alloc policy. */ | 
|  | image->control_page = crashk_res.start; | 
|  | image->type = KEXEC_TYPE_CRASH; | 
|  | } | 
|  |  | 
|  | ret = sanity_check_segment_list(image); | 
|  | if (ret) | 
|  | goto out_free_image; | 
|  |  | 
|  | /* | 
|  | * Find a location for the control code buffer, and add it | 
|  | * the vector of segments so that it's pages will also be | 
|  | * counted as destination pages. | 
|  | */ | 
|  | ret = -ENOMEM; | 
|  | image->control_code_page = kimage_alloc_control_pages(image, | 
|  | get_order(KEXEC_CONTROL_PAGE_SIZE)); | 
|  | if (!image->control_code_page) { | 
|  | pr_err("Could not allocate control_code_buffer\n"); | 
|  | goto out_free_image; | 
|  | } | 
|  |  | 
|  | if (!kexec_on_panic) { | 
|  | image->swap_page = kimage_alloc_control_pages(image, 0); | 
|  | if (!image->swap_page) { | 
|  | pr_err("Could not allocate swap buffer\n"); | 
|  | goto out_free_control_pages; | 
|  | } | 
|  | } | 
|  |  | 
|  | *rimage = image; | 
|  | return 0; | 
|  | out_free_control_pages: | 
|  | kimage_free_page_list(&image->control_pages); | 
|  | out_free_image: | 
|  | kfree(image); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | static int do_kexec_load(unsigned long entry, unsigned long nr_segments, | 
|  | struct kexec_segment __user *segments, unsigned long flags) | 
|  | { | 
|  | struct kimage **dest_image, *image; | 
|  | unsigned long i; | 
|  | int ret; | 
|  |  | 
|  | if (flags & KEXEC_ON_CRASH) { | 
|  | dest_image = &kexec_crash_image; | 
|  | if (kexec_crash_image) | 
|  | arch_kexec_unprotect_crashkres(); | 
|  | } else { | 
|  | dest_image = &kexec_image; | 
|  | } | 
|  |  | 
|  | if (nr_segments == 0) { | 
|  | /* Uninstall image */ | 
|  | kimage_free(xchg(dest_image, NULL)); | 
|  | return 0; | 
|  | } | 
|  | if (flags & KEXEC_ON_CRASH) { | 
|  | /* | 
|  | * Loading another kernel to switch to if this one | 
|  | * crashes.  Free any current crash dump kernel before | 
|  | * we corrupt it. | 
|  | */ | 
|  | kimage_free(xchg(&kexec_crash_image, NULL)); | 
|  | } | 
|  |  | 
|  | ret = kimage_alloc_init(&image, entry, nr_segments, segments, flags); | 
|  | if (ret) | 
|  | return ret; | 
|  |  | 
|  | if (flags & KEXEC_PRESERVE_CONTEXT) | 
|  | image->preserve_context = 1; | 
|  |  | 
|  | ret = machine_kexec_prepare(image); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | /* | 
|  | * Some architecture(like S390) may touch the crash memory before | 
|  | * machine_kexec_prepare(), we must copy vmcoreinfo data after it. | 
|  | */ | 
|  | ret = kimage_crash_copy_vmcoreinfo(image); | 
|  | if (ret) | 
|  | goto out; | 
|  |  | 
|  | for (i = 0; i < nr_segments; i++) { | 
|  | ret = kimage_load_segment(image, &image->segment[i]); | 
|  | if (ret) | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | kimage_terminate(image); | 
|  |  | 
|  | /* Install the new kernel and uninstall the old */ | 
|  | image = xchg(dest_image, image); | 
|  |  | 
|  | out: | 
|  | if ((flags & KEXEC_ON_CRASH) && kexec_crash_image) | 
|  | arch_kexec_protect_crashkres(); | 
|  |  | 
|  | kimage_free(image); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Exec Kernel system call: for obvious reasons only root may call it. | 
|  | * | 
|  | * This call breaks up into three pieces. | 
|  | * - A generic part which loads the new kernel from the current | 
|  | *   address space, and very carefully places the data in the | 
|  | *   allocated pages. | 
|  | * | 
|  | * - A generic part that interacts with the kernel and tells all of | 
|  | *   the devices to shut down.  Preventing on-going dmas, and placing | 
|  | *   the devices in a consistent state so a later kernel can | 
|  | *   reinitialize them. | 
|  | * | 
|  | * - A machine specific part that includes the syscall number | 
|  | *   and then copies the image to it's final destination.  And | 
|  | *   jumps into the image at entry. | 
|  | * | 
|  | * kexec does not sync, or unmount filesystems so if you need | 
|  | * that to happen you need to do that yourself. | 
|  | */ | 
|  |  | 
|  | static inline int kexec_load_check(unsigned long nr_segments, | 
|  | unsigned long flags) | 
|  | { | 
|  | /* We only trust the superuser with rebooting the system. */ | 
|  | if (!capable(CAP_SYS_BOOT) || kexec_load_disabled) | 
|  | return -EPERM; | 
|  |  | 
|  | /* | 
|  | * Verify we have a legal set of flags | 
|  | * This leaves us room for future extensions. | 
|  | */ | 
|  | if ((flags & KEXEC_FLAGS) != (flags & ~KEXEC_ARCH_MASK)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Put an artificial cap on the number | 
|  | * of segments passed to kexec_load. | 
|  | */ | 
|  | if (nr_segments > KEXEC_SEGMENT_MAX) | 
|  | return -EINVAL; | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | SYSCALL_DEFINE4(kexec_load, unsigned long, entry, unsigned long, nr_segments, | 
|  | struct kexec_segment __user *, segments, unsigned long, flags) | 
|  | { | 
|  | int result; | 
|  |  | 
|  | result = kexec_load_check(nr_segments, flags); | 
|  | if (result) | 
|  | return result; | 
|  |  | 
|  | /* Verify we are on the appropriate architecture */ | 
|  | if (((flags & KEXEC_ARCH_MASK) != KEXEC_ARCH) && | 
|  | ((flags & KEXEC_ARCH_MASK) != KEXEC_ARCH_DEFAULT)) | 
|  | return -EINVAL; | 
|  |  | 
|  | /* Because we write directly to the reserved memory | 
|  | * region when loading crash kernels we need a mutex here to | 
|  | * prevent multiple crash  kernels from attempting to load | 
|  | * simultaneously, and to prevent a crash kernel from loading | 
|  | * over the top of a in use crash kernel. | 
|  | * | 
|  | * KISS: always take the mutex. | 
|  | */ | 
|  | if (!mutex_trylock(&kexec_mutex)) | 
|  | return -EBUSY; | 
|  |  | 
|  | result = do_kexec_load(entry, nr_segments, segments, flags); | 
|  |  | 
|  | mutex_unlock(&kexec_mutex); | 
|  |  | 
|  | return result; | 
|  | } | 
|  |  | 
|  | #ifdef CONFIG_COMPAT | 
|  | COMPAT_SYSCALL_DEFINE4(kexec_load, compat_ulong_t, entry, | 
|  | compat_ulong_t, nr_segments, | 
|  | struct compat_kexec_segment __user *, segments, | 
|  | compat_ulong_t, flags) | 
|  | { | 
|  | struct compat_kexec_segment in; | 
|  | struct kexec_segment out, __user *ksegments; | 
|  | unsigned long i, result; | 
|  |  | 
|  | result = kexec_load_check(nr_segments, flags); | 
|  | if (result) | 
|  | return result; | 
|  |  | 
|  | /* Don't allow clients that don't understand the native | 
|  | * architecture to do anything. | 
|  | */ | 
|  | if ((flags & KEXEC_ARCH_MASK) == KEXEC_ARCH_DEFAULT) | 
|  | return -EINVAL; | 
|  |  | 
|  | ksegments = compat_alloc_user_space(nr_segments * sizeof(out)); | 
|  | for (i = 0; i < nr_segments; i++) { | 
|  | result = copy_from_user(&in, &segments[i], sizeof(in)); | 
|  | if (result) | 
|  | return -EFAULT; | 
|  |  | 
|  | out.buf   = compat_ptr(in.buf); | 
|  | out.bufsz = in.bufsz; | 
|  | out.mem   = in.mem; | 
|  | out.memsz = in.memsz; | 
|  |  | 
|  | result = copy_to_user(&ksegments[i], &out, sizeof(out)); | 
|  | if (result) | 
|  | return -EFAULT; | 
|  | } | 
|  |  | 
|  | /* Because we write directly to the reserved memory | 
|  | * region when loading crash kernels we need a mutex here to | 
|  | * prevent multiple crash  kernels from attempting to load | 
|  | * simultaneously, and to prevent a crash kernel from loading | 
|  | * over the top of a in use crash kernel. | 
|  | * | 
|  | * KISS: always take the mutex. | 
|  | */ | 
|  | if (!mutex_trylock(&kexec_mutex)) | 
|  | return -EBUSY; | 
|  |  | 
|  | result = do_kexec_load(entry, nr_segments, ksegments, flags); | 
|  |  | 
|  | mutex_unlock(&kexec_mutex); | 
|  |  | 
|  | return result; | 
|  | } | 
|  | #endif |