blob: 2fb1a7037c82cfb7a144537be85a991e7109979f [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
//
// TAS2781 HDA I2C driver
//
// Copyright 2023 Texas Instruments, Inc.
//
// Author: Shenghao Ding <shenghao-ding@ti.com>
#include <linux/acpi.h>
#include <linux/crc8.h>
#include <linux/crc32.h>
#include <linux/efi.h>
#include <linux/firmware.h>
#include <linux/i2c.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <sound/hda_codec.h>
#include <sound/soc.h>
#include <sound/tas2781.h>
#include <sound/tlv.h>
#include <sound/tas2781-tlv.h>
#include "hda_local.h"
#include "hda_auto_parser.h"
#include "hda_component.h"
#include "hda_jack.h"
#include "hda_generic.h"
#define TASDEVICE_SPEAKER_CALIBRATION_SIZE 20
/* No standard control callbacks for SNDRV_CTL_ELEM_IFACE_CARD
* Define two controls, one is Volume control callbacks, the other is
* flag setting control callbacks.
*/
/* Volume control callbacks for tas2781 */
#define ACARD_SINGLE_RANGE_EXT_TLV(xname, xreg, xshift, xmin, xmax, xinvert, \
xhandler_get, xhandler_put, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = (xname),\
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
SNDRV_CTL_ELEM_ACCESS_READWRITE,\
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw_range, \
.get = xhandler_get, .put = xhandler_put, \
.private_value = (unsigned long)&(struct soc_mixer_control) \
{.reg = xreg, .rreg = xreg, .shift = xshift, \
.rshift = xshift, .min = xmin, .max = xmax, \
.invert = xinvert} }
/* Flag control callbacks for tas2781 */
#define ACARD_SINGLE_BOOL_EXT(xname, xdata, xhandler_get, xhandler_put) \
{ .iface = SNDRV_CTL_ELEM_IFACE_CARD, .name = xname, \
.info = snd_ctl_boolean_mono_info, \
.get = xhandler_get, .put = xhandler_put, \
.private_value = xdata }
enum calib_data {
R0_VAL = 0,
INV_R0,
R0LOW,
POWER,
TLIM,
CALIB_MAX
};
static int tas2781_get_i2c_res(struct acpi_resource *ares, void *data)
{
struct tasdevice_priv *tas_priv = data;
struct acpi_resource_i2c_serialbus *sb;
if (i2c_acpi_get_i2c_resource(ares, &sb)) {
if (tas_priv->ndev < TASDEVICE_MAX_CHANNELS &&
sb->slave_address != TAS2781_GLOBAL_ADDR) {
tas_priv->tasdevice[tas_priv->ndev].dev_addr =
(unsigned int)sb->slave_address;
tas_priv->ndev++;
}
}
return 1;
}
static int tas2781_read_acpi(struct tasdevice_priv *p, const char *hid)
{
struct acpi_device *adev;
struct device *physdev;
LIST_HEAD(resources);
const char *sub;
int ret;
adev = acpi_dev_get_first_match_dev(hid, NULL, -1);
if (!adev) {
dev_err(p->dev,
"Failed to find an ACPI device for %s\n", hid);
return -ENODEV;
}
ret = acpi_dev_get_resources(adev, &resources, tas2781_get_i2c_res, p);
if (ret < 0)
goto err;
acpi_dev_free_resource_list(&resources);
strscpy(p->dev_name, hid, sizeof(p->dev_name));
physdev = get_device(acpi_get_first_physical_node(adev));
acpi_dev_put(adev);
/* No side-effect to the playback even if subsystem_id is NULL*/
sub = acpi_get_subsystem_id(ACPI_HANDLE(physdev));
if (IS_ERR(sub))
sub = NULL;
p->acpi_subsystem_id = sub;
put_device(physdev);
return 0;
err:
dev_err(p->dev, "read acpi error, ret: %d\n", ret);
acpi_dev_put(adev);
return ret;
}
static void tas2781_hda_playback_hook(struct device *dev, int action)
{
struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
dev_dbg(tas_priv->dev, "%s: action = %d\n", __func__, action);
switch (action) {
case HDA_GEN_PCM_ACT_OPEN:
pm_runtime_get_sync(dev);
mutex_lock(&tas_priv->codec_lock);
tasdevice_tuning_switch(tas_priv, 0);
mutex_unlock(&tas_priv->codec_lock);
break;
case HDA_GEN_PCM_ACT_CLOSE:
mutex_lock(&tas_priv->codec_lock);
tasdevice_tuning_switch(tas_priv, 1);
mutex_unlock(&tas_priv->codec_lock);
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
break;
default:
dev_dbg(tas_priv->dev, "Playback action not supported: %d\n",
action);
break;
}
}
static int tasdevice_info_profile(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
uinfo->count = 1;
uinfo->value.integer.min = 0;
uinfo->value.integer.max = tas_priv->rcabin.ncfgs - 1;
return 0;
}
static int tasdevice_get_profile_id(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
ucontrol->value.integer.value[0] = tas_priv->rcabin.profile_cfg_id;
return 0;
}
static int tasdevice_set_profile_id(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
int nr_profile = ucontrol->value.integer.value[0];
int max = tas_priv->rcabin.ncfgs - 1;
int val, ret = 0;
val = clamp(nr_profile, 0, max);
if (tas_priv->rcabin.profile_cfg_id != val) {
tas_priv->rcabin.profile_cfg_id = val;
ret = 1;
}
return ret;
}
static int tasdevice_info_programs(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
struct tasdevice_fw *tas_fw = tas_priv->fmw;
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
uinfo->count = 1;
uinfo->value.integer.min = 0;
uinfo->value.integer.max = tas_fw->nr_programs - 1;
return 0;
}
static int tasdevice_info_config(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
struct tasdevice_fw *tas_fw = tas_priv->fmw;
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
uinfo->count = 1;
uinfo->value.integer.min = 0;
uinfo->value.integer.max = tas_fw->nr_configurations - 1;
return 0;
}
static int tasdevice_program_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
ucontrol->value.integer.value[0] = tas_priv->cur_prog;
return 0;
}
static int tasdevice_program_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
struct tasdevice_fw *tas_fw = tas_priv->fmw;
int nr_program = ucontrol->value.integer.value[0];
int max = tas_fw->nr_programs - 1;
int val, ret = 0;
val = clamp(nr_program, 0, max);
if (tas_priv->cur_prog != val) {
tas_priv->cur_prog = val;
ret = 1;
}
return ret;
}
static int tasdevice_config_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
ucontrol->value.integer.value[0] = tas_priv->cur_conf;
return 0;
}
static int tasdevice_config_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
struct tasdevice_fw *tas_fw = tas_priv->fmw;
int nr_config = ucontrol->value.integer.value[0];
int max = tas_fw->nr_configurations - 1;
int val, ret = 0;
val = clamp(nr_config, 0, max);
if (tas_priv->cur_conf != val) {
tas_priv->cur_conf = val;
ret = 1;
}
return ret;
}
/*
* tas2781_digital_getvol - get the volum control
* @kcontrol: control pointer
* @ucontrol: User data
* Customer Kcontrol for tas2781 is primarily for regmap booking, paging
* depends on internal regmap mechanism.
* tas2781 contains book and page two-level register map, especially
* book switching will set the register BXXP00R7F, after switching to the
* correct book, then leverage the mechanism for paging to access the
* register.
*/
static int tas2781_digital_getvol(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
return tasdevice_digital_getvol(tas_priv, ucontrol, mc);
}
static int tas2781_amp_getvol(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
return tasdevice_amp_getvol(tas_priv, ucontrol, mc);
}
static int tas2781_digital_putvol(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
/* The check of the given value is in tasdevice_digital_putvol. */
return tasdevice_digital_putvol(tas_priv, ucontrol, mc);
}
static int tas2781_amp_putvol(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
/* The check of the given value is in tasdevice_amp_putvol. */
return tasdevice_amp_putvol(tas_priv, ucontrol, mc);
}
static int tas2781_force_fwload_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
ucontrol->value.integer.value[0] = (int)tas_priv->force_fwload_status;
dev_dbg(tas_priv->dev, "%s : Force FWload %s\n", __func__,
tas_priv->force_fwload_status ? "ON" : "OFF");
return 0;
}
static int tas2781_force_fwload_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct tasdevice_priv *tas_priv = snd_kcontrol_chip(kcontrol);
bool change, val = (bool)ucontrol->value.integer.value[0];
if (tas_priv->force_fwload_status == val)
change = false;
else {
change = true;
tas_priv->force_fwload_status = val;
}
dev_dbg(tas_priv->dev, "%s : Force FWload %s\n", __func__,
tas_priv->force_fwload_status ? "ON" : "OFF");
return change;
}
static const struct snd_kcontrol_new tas2781_snd_controls[] = {
ACARD_SINGLE_RANGE_EXT_TLV("Speaker Analog Gain", TAS2781_AMP_LEVEL,
1, 0, 20, 0, tas2781_amp_getvol,
tas2781_amp_putvol, amp_vol_tlv),
ACARD_SINGLE_RANGE_EXT_TLV("Speaker Digital Gain", TAS2781_DVC_LVL,
0, 0, 200, 1, tas2781_digital_getvol,
tas2781_digital_putvol, dvc_tlv),
ACARD_SINGLE_BOOL_EXT("Speaker Force Firmware Load", 0,
tas2781_force_fwload_get, tas2781_force_fwload_put),
};
static const struct snd_kcontrol_new tas2781_prof_ctrl = {
.name = "Speaker Profile Id",
.iface = SNDRV_CTL_ELEM_IFACE_CARD,
.info = tasdevice_info_profile,
.get = tasdevice_get_profile_id,
.put = tasdevice_set_profile_id,
};
static const struct snd_kcontrol_new tas2781_dsp_prog_ctrl = {
.name = "Speaker Program Id",
.iface = SNDRV_CTL_ELEM_IFACE_CARD,
.info = tasdevice_info_programs,
.get = tasdevice_program_get,
.put = tasdevice_program_put,
};
static const struct snd_kcontrol_new tas2781_dsp_conf_ctrl = {
.name = "Speaker Config Id",
.iface = SNDRV_CTL_ELEM_IFACE_CARD,
.info = tasdevice_info_config,
.get = tasdevice_config_get,
.put = tasdevice_config_put,
};
static void tas2781_apply_calib(struct tasdevice_priv *tas_priv)
{
static const unsigned char page_array[CALIB_MAX] = {
0x17, 0x18, 0x18, 0x0d, 0x18
};
static const unsigned char rgno_array[CALIB_MAX] = {
0x74, 0x0c, 0x14, 0x3c, 0x7c
};
unsigned char *data;
int i, j, rc;
for (i = 0; i < tas_priv->ndev; i++) {
data = tas_priv->cali_data.data +
i * TASDEVICE_SPEAKER_CALIBRATION_SIZE;
for (j = 0; j < CALIB_MAX; j++) {
rc = tasdevice_dev_bulk_write(tas_priv, i,
TASDEVICE_REG(0, page_array[j], rgno_array[j]),
&(data[4 * j]), 4);
if (rc < 0)
dev_err(tas_priv->dev,
"chn %d calib %d bulk_wr err = %d\n",
i, j, rc);
}
}
}
/* Update the calibrate data, including speaker impedance, f0, etc, into algo.
* Calibrate data is done by manufacturer in the factory. These data are used
* by Algo for calucating the speaker temperature, speaker membrance excursion
* and f0 in real time during playback.
*/
static int tas2781_save_calibration(struct tasdevice_priv *tas_priv)
{
efi_guid_t efi_guid = EFI_GUID(0x02f9af02, 0x7734, 0x4233, 0xb4, 0x3d,
0x93, 0xfe, 0x5a, 0xa3, 0x5d, 0xb3);
static efi_char16_t efi_name[] = L"CALI_DATA";
struct tm *tm = &tas_priv->tm;
unsigned int attr, crc;
unsigned int *tmp_val;
efi_status_t status;
/* Lenovo devices */
if (tas_priv->catlog_id == LENOVO)
efi_guid = EFI_GUID(0x1f52d2a1, 0xbb3a, 0x457d, 0xbc, 0x09,
0x43, 0xa3, 0xf4, 0x31, 0x0a, 0x92);
tas_priv->cali_data.total_sz = 0;
/* Get real size of UEFI variable */
status = efi.get_variable(efi_name, &efi_guid, &attr,
&tas_priv->cali_data.total_sz, tas_priv->cali_data.data);
if (status == EFI_BUFFER_TOO_SMALL) {
/* Allocate data buffer of data_size bytes */
tas_priv->cali_data.data = devm_kzalloc(tas_priv->dev,
tas_priv->cali_data.total_sz, GFP_KERNEL);
if (!tas_priv->cali_data.data)
return -ENOMEM;
/* Get variable contents into buffer */
status = efi.get_variable(efi_name, &efi_guid, &attr,
&tas_priv->cali_data.total_sz,
tas_priv->cali_data.data);
}
if (status != EFI_SUCCESS)
return -EINVAL;
tmp_val = (unsigned int *)tas_priv->cali_data.data;
crc = crc32(~0, tas_priv->cali_data.data, 84) ^ ~0;
dev_dbg(tas_priv->dev, "cali crc 0x%08x PK tmp_val 0x%08x\n",
crc, tmp_val[21]);
if (crc == tmp_val[21]) {
time64_to_tm(tmp_val[20], 0, tm);
dev_dbg(tas_priv->dev, "%4ld-%2d-%2d, %2d:%2d:%2d\n",
tm->tm_year, tm->tm_mon, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
tas2781_apply_calib(tas_priv);
} else
tas_priv->cali_data.total_sz = 0;
return 0;
}
static void tasdev_fw_ready(const struct firmware *fmw, void *context)
{
struct tasdevice_priv *tas_priv = context;
struct hda_codec *codec = tas_priv->codec;
int i, ret;
pm_runtime_get_sync(tas_priv->dev);
mutex_lock(&tas_priv->codec_lock);
ret = tasdevice_rca_parser(tas_priv, fmw);
if (ret)
goto out;
ret = snd_ctl_add(codec->card,
snd_ctl_new1(&tas2781_prof_ctrl, tas_priv));
if (ret) {
dev_err(tas_priv->dev,
"Failed to add KControl %s = %d\n",
tas2781_prof_ctrl.name, ret);
goto out;
}
for (i = 0; i < ARRAY_SIZE(tas2781_snd_controls); i++) {
ret = snd_ctl_add(codec->card,
snd_ctl_new1(&tas2781_snd_controls[i], tas_priv));
if (ret) {
dev_err(tas_priv->dev,
"Failed to add KControl %s = %d\n",
tas2781_snd_controls[i].name, ret);
goto out;
}
}
tasdevice_dsp_remove(tas_priv);
tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING;
scnprintf(tas_priv->coef_binaryname, 64, "TAS2XXX%04X.bin",
codec->core.subsystem_id & 0xffff);
ret = tasdevice_dsp_parser(tas_priv);
if (ret) {
dev_err(tas_priv->dev, "dspfw load %s error\n",
tas_priv->coef_binaryname);
tas_priv->fw_state = TASDEVICE_DSP_FW_FAIL;
goto out;
}
ret = snd_ctl_add(codec->card,
snd_ctl_new1(&tas2781_dsp_prog_ctrl, tas_priv));
if (ret) {
dev_err(tas_priv->dev,
"Failed to add KControl %s = %d\n",
tas2781_dsp_prog_ctrl.name, ret);
goto out;
}
ret = snd_ctl_add(codec->card,
snd_ctl_new1(&tas2781_dsp_conf_ctrl, tas_priv));
if (ret) {
dev_err(tas_priv->dev,
"Failed to add KControl %s = %d\n",
tas2781_dsp_conf_ctrl.name, ret);
goto out;
}
tas_priv->fw_state = TASDEVICE_DSP_FW_ALL_OK;
tasdevice_prmg_load(tas_priv, 0);
if (tas_priv->fmw->nr_programs > 0)
tas_priv->cur_prog = 0;
if (tas_priv->fmw->nr_configurations > 0)
tas_priv->cur_conf = 0;
/* If calibrated data occurs error, dsp will still works with default
* calibrated data inside algo.
*/
tas2781_save_calibration(tas_priv);
out:
mutex_unlock(&tas_priv->codec_lock);
if (fmw)
release_firmware(fmw);
pm_runtime_mark_last_busy(tas_priv->dev);
pm_runtime_put_autosuspend(tas_priv->dev);
}
static int tas2781_hda_bind(struct device *dev, struct device *master,
void *master_data)
{
struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
struct hda_component *comps = master_data;
struct hda_codec *codec;
unsigned int subid;
int ret;
if (!comps || tas_priv->index < 0 ||
tas_priv->index >= HDA_MAX_COMPONENTS)
return -EINVAL;
comps = &comps[tas_priv->index];
if (comps->dev)
return -EBUSY;
codec = comps->codec;
subid = codec->core.subsystem_id >> 16;
switch (subid) {
case 0x17aa:
tas_priv->catlog_id = LENOVO;
break;
default:
tas_priv->catlog_id = OTHERS;
break;
}
pm_runtime_get_sync(dev);
comps->dev = dev;
strscpy(comps->name, dev_name(dev), sizeof(comps->name));
ret = tascodec_init(tas_priv, codec, tasdev_fw_ready);
if (!ret)
comps->playback_hook = tas2781_hda_playback_hook;
pm_runtime_mark_last_busy(dev);
pm_runtime_put_autosuspend(dev);
return ret;
}
static void tas2781_hda_unbind(struct device *dev,
struct device *master, void *master_data)
{
struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
struct hda_component *comps = master_data;
comps = &comps[tas_priv->index];
if (comps->dev == dev) {
comps->dev = NULL;
memset(comps->name, 0, sizeof(comps->name));
comps->playback_hook = NULL;
}
tasdevice_config_info_remove(tas_priv);
tasdevice_dsp_remove(tas_priv);
tas_priv->fw_state = TASDEVICE_DSP_FW_PENDING;
}
static const struct component_ops tas2781_hda_comp_ops = {
.bind = tas2781_hda_bind,
.unbind = tas2781_hda_unbind,
};
static void tas2781_hda_remove(struct device *dev)
{
struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
pm_runtime_get_sync(tas_priv->dev);
pm_runtime_disable(tas_priv->dev);
component_del(tas_priv->dev, &tas2781_hda_comp_ops);
pm_runtime_put_noidle(tas_priv->dev);
tasdevice_remove(tas_priv);
}
static int tas2781_hda_i2c_probe(struct i2c_client *clt)
{
struct tasdevice_priv *tas_priv;
const char *device_name;
int ret;
if (strstr(dev_name(&clt->dev), "TIAS2781"))
device_name = "TIAS2781";
else
return -ENODEV;
tas_priv = tasdevice_kzalloc(clt);
if (!tas_priv)
return -ENOMEM;
tas_priv->irq_info.irq = clt->irq;
ret = tas2781_read_acpi(tas_priv, device_name);
if (ret)
return dev_err_probe(tas_priv->dev, ret,
"Platform not supported\n");
ret = tasdevice_init(tas_priv);
if (ret)
goto err;
pm_runtime_set_autosuspend_delay(tas_priv->dev, 3000);
pm_runtime_use_autosuspend(tas_priv->dev);
pm_runtime_mark_last_busy(tas_priv->dev);
pm_runtime_set_active(tas_priv->dev);
pm_runtime_get_noresume(tas_priv->dev);
pm_runtime_enable(tas_priv->dev);
pm_runtime_put_autosuspend(tas_priv->dev);
tas2781_reset(tas_priv);
ret = component_add(tas_priv->dev, &tas2781_hda_comp_ops);
if (ret) {
dev_err(tas_priv->dev, "Register component failed: %d\n", ret);
pm_runtime_disable(tas_priv->dev);
}
err:
if (ret)
tas2781_hda_remove(&clt->dev);
return ret;
}
static void tas2781_hda_i2c_remove(struct i2c_client *clt)
{
tas2781_hda_remove(&clt->dev);
}
static int tas2781_runtime_suspend(struct device *dev)
{
struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
int i;
dev_dbg(tas_priv->dev, "Runtime Suspend\n");
mutex_lock(&tas_priv->codec_lock);
if (tas_priv->playback_started) {
tasdevice_tuning_switch(tas_priv, 1);
tas_priv->playback_started = false;
}
for (i = 0; i < tas_priv->ndev; i++) {
tas_priv->tasdevice[i].cur_book = -1;
tas_priv->tasdevice[i].cur_prog = -1;
tas_priv->tasdevice[i].cur_conf = -1;
}
regcache_cache_only(tas_priv->regmap, true);
regcache_mark_dirty(tas_priv->regmap);
mutex_unlock(&tas_priv->codec_lock);
return 0;
}
static int tas2781_runtime_resume(struct device *dev)
{
struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
unsigned long calib_data_sz =
tas_priv->ndev * TASDEVICE_SPEAKER_CALIBRATION_SIZE;
int ret;
dev_dbg(tas_priv->dev, "Runtime Resume\n");
mutex_lock(&tas_priv->codec_lock);
regcache_cache_only(tas_priv->regmap, false);
ret = regcache_sync(tas_priv->regmap);
if (ret) {
dev_err(tas_priv->dev,
"Failed to restore register cache: %d\n", ret);
goto out;
}
tasdevice_prmg_load(tas_priv, tas_priv->cur_prog);
/* If calibrated data occurs error, dsp will still works with default
* calibrated data inside algo.
*/
if (tas_priv->cali_data.total_sz > calib_data_sz)
tas2781_apply_calib(tas_priv);
out:
mutex_unlock(&tas_priv->codec_lock);
return ret;
}
static int tas2781_system_suspend(struct device *dev)
{
struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
int ret;
dev_dbg(tas_priv->dev, "System Suspend\n");
ret = pm_runtime_force_suspend(dev);
if (ret)
return ret;
/* Shutdown chip before system suspend */
regcache_cache_only(tas_priv->regmap, false);
tasdevice_tuning_switch(tas_priv, 1);
regcache_cache_only(tas_priv->regmap, true);
regcache_mark_dirty(tas_priv->regmap);
/*
* Reset GPIO may be shared, so cannot reset here.
* However beyond this point, amps may be powered down.
*/
return 0;
}
static int tas2781_system_resume(struct device *dev)
{
struct tasdevice_priv *tas_priv = dev_get_drvdata(dev);
unsigned long calib_data_sz =
tas_priv->ndev * TASDEVICE_SPEAKER_CALIBRATION_SIZE;
int i, ret;
dev_dbg(tas_priv->dev, "System Resume\n");
ret = pm_runtime_force_resume(dev);
if (ret)
return ret;
mutex_lock(&tas_priv->codec_lock);
for (i = 0; i < tas_priv->ndev; i++) {
tas_priv->tasdevice[i].cur_book = -1;
tas_priv->tasdevice[i].cur_prog = -1;
tas_priv->tasdevice[i].cur_conf = -1;
}
tas2781_reset(tas_priv);
tasdevice_prmg_load(tas_priv, tas_priv->cur_prog);
/* If calibrated data occurs error, dsp will still work with default
* calibrated data inside algo.
*/
if (tas_priv->cali_data.total_sz > calib_data_sz)
tas2781_apply_calib(tas_priv);
mutex_unlock(&tas_priv->codec_lock);
return 0;
}
static const struct dev_pm_ops tas2781_hda_pm_ops = {
RUNTIME_PM_OPS(tas2781_runtime_suspend, tas2781_runtime_resume, NULL)
SYSTEM_SLEEP_PM_OPS(tas2781_system_suspend, tas2781_system_resume)
};
static const struct i2c_device_id tas2781_hda_i2c_id[] = {
{ "tas2781-hda", 0 },
{}
};
static const struct acpi_device_id tas2781_acpi_hda_match[] = {
{"TIAS2781", 0 },
{}
};
MODULE_DEVICE_TABLE(acpi, tas2781_acpi_hda_match);
static struct i2c_driver tas2781_hda_i2c_driver = {
.driver = {
.name = "tas2781-hda",
.acpi_match_table = tas2781_acpi_hda_match,
.pm = &tas2781_hda_pm_ops,
},
.id_table = tas2781_hda_i2c_id,
.probe = tas2781_hda_i2c_probe,
.remove = tas2781_hda_i2c_remove,
};
module_i2c_driver(tas2781_hda_i2c_driver);
MODULE_DESCRIPTION("TAS2781 HDA Driver");
MODULE_AUTHOR("Shenghao Ding, TI, <shenghao-ding@ti.com>");
MODULE_LICENSE("GPL");
MODULE_IMPORT_NS(SND_SOC_TAS2781_FMWLIB);