blob: dbb48934d4995029170686a10552610df5fccfcd [file] [log] [blame]
// SPDX-License-Identifier: BSD-3-Clause
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sc7180.dtsi"
#include "pm6150.dtsi"
#include "pm6150l.dtsi"
/delete-node/ &tz_mem;
/delete-node/ &ipa_fw_mem;
/ {
model = "Acer Aspire 1";
compatible = "acer,aspire1", "qcom,sc7180";
chassis-type = "laptop";
aliases {
bluetooth0 = &bluetooth;
hsuart0 = &uart3;
serial0 = &uart8;
wifi0 = &wifi;
};
chosen {
stdout-path = "serial0:115200n8";
};
reserved-memory {
zap_mem: zap-shader@80840000 {
reg = <0x0 0x80840000 0 0x2000>;
no-map;
};
venus_mem: venus@85b00000 {
reg = <0x0 0x85b00000 0 0x500000>;
no-map;
};
mpss_mem: mpss@86000000 {
reg = <0x0 0x86000000 0x0 0x2000000>;
no-map;
};
adsp_mem: adsp@8e400000 {
reg = <0x0 0x8e400000 0x0 0x2800000>;
no-map;
};
wlan_mem: wlan@93900000 {
reg = <0x0 0x93900000 0x0 0x200000>;
no-map;
};
};
max98357a: audio-codec {
compatible = "maxim,max98357a";
sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&amp_sd_mode_default>;
pinctrl-names = "default";
#sound-dai-cells = <0>;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&sn65dsi86_bridge 1000000>;
enable-gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&soc_bkoff_default>;
pinctrl-names = "default";
};
reg_brij_1p2: bridge-1p2-regulator {
compatible = "regulator-fixed";
regulator-name = "brij_1p2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
gpio = <&tlmm 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&reg_edp_1p2_en_default>;
pinctrl-names = "default";
};
reg_brij_1p8: bridge-regulator {
compatible = "regulator-fixed";
regulator-name = "brij_1p8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vreg_l8c_1p8>;
gpio = <&tlmm 20 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&reg_edp_1p8_en_default>;
pinctrl-names = "default";
};
reg_codec_3p3: codec-regulator {
compatible = "regulator-fixed";
regulator-name = "codec_3p3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&reg_audio_en_default>;
pinctrl-names = "default";
};
reg_lcm_3p3: panel-regulator {
compatible = "regulator-fixed";
regulator-name = "lcm_3p3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&reg_lcm_en_default>;
pinctrl-names = "default";
};
reg_tp_3p3: touchpad-regulator {
compatible = "regulator-fixed";
regulator-name = "tp_3p3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&reg_tp_en_default>;
pinctrl-names = "default";
};
};
&i2c2 {
clock-frequency = <400000>;
status = "okay";
/* embedded-controller@76 */
};
&i2c4 {
clock-frequency = <400000>;
status = "okay";
/*
* NOTE: DSDT defines two possible touchpads, other one is
*
* reg = <0x15>;
* hid-descr-addr = <0x1>;
*/
touchpad@2c {
compatible = "hid-over-i2c";
reg = <0x2c>;
hid-descr-addr = <0x20>;
vdd-supply = <&reg_tp_3p3>;
interrupts-extended = <&tlmm 94 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&hid_touchpad_default>;
pinctrl-names = "default";
wakeup-source;
};
keyboard@3a {
compatible = "hid-over-i2c";
reg = <0x3a>;
hid-descr-addr = <0x1>;
interrupts-extended = <&tlmm 33 IRQ_TYPE_LEVEL_LOW>;
pinctrl-0 = <&hid_keyboard_default>;
pinctrl-names = "default";
wakeup-source;
};
};
&i2c9 {
clock-frequency = <400000>;
status = "okay";
alc5682: codec@1a {
compatible = "realtek,rt5682i";
reg = <0x1a>;
#sound-dai-cells = <1>;
interrupt-parent = <&tlmm>;
interrupts = <28 IRQ_TYPE_EDGE_BOTH>;
pinctrl-0 = <&codec_irq_default>;
pinctrl-names = "default";
AVDD-supply = <&vreg_l15a_1p8>;
MICVDD-supply = <&reg_codec_3p3>;
VBAT-supply = <&reg_codec_3p3>;
realtek,dmic1-data-pin = <1>;
realtek,dmic1-clk-pin = <1>;
realtek,jd-src = <1>;
};
};
&i2c10 {
clock-frequency = <400000>;
status = "okay";
sn65dsi86_bridge: bridge@2c {
compatible = "ti,sn65dsi86";
reg = <0x2c>;
gpio-controller;
#gpio-cells = <2>;
#pwm-cells = <1>;
interrupt-parent = <&tlmm>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
enable-gpios = <&tlmm 51 GPIO_ACTIVE_HIGH>;
suspend-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&bridge_en_default>,
<&edp_bridge_irq_default>,
<&bridge_suspend_default>;
pinctrl-names = "default";
vpll-supply = <&reg_brij_1p8>;
vccio-supply = <&reg_brij_1p8>;
vcca-supply = <&reg_brij_1p2>;
vcc-supply = <&reg_brij_1p2>;
clocks = <&rpmhcc RPMH_LN_BB_CLK3>;
clock-names = "refclk";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
sn65dsi86_in: endpoint {
remote-endpoint = <&mdss_dsi0_out>;
};
};
port@1 {
reg = <1>;
sn65dsi86_out: endpoint {
data-lanes = <0 1>;
remote-endpoint = <&panel_in_edp>;
};
};
};
aux-bus {
panel: panel {
compatible = "edp-panel";
power-supply = <&reg_lcm_3p3>;
backlight = <&backlight>;
hpd-absent-delay-ms = <200>;
port {
panel_in_edp: endpoint {
remote-endpoint = <&sn65dsi86_out>;
};
};
};
};
};
};
&gpu {
status = "okay";
zap-shader {
memory-region = <&zap_mem>;
firmware-name = "qcom/sc7180/acer/aspire1/qcdxkmsuc7180.mbn";
};
};
&mdss {
status = "okay";
};
&mdss_dsi0 {
vdda-supply = <&vreg_l3c_1p2>;
status = "okay";
};
&mdss_dsi0_out {
remote-endpoint = <&sn65dsi86_in>;
data-lanes = <0 1 2 3>;
};
&mdss_dsi0_phy {
vdds-supply = <&vreg_l4a_0p8>;
status = "okay";
};
&pm6150_adc {
channel@4e {
reg = <ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
label = "thermistor";
};
channel@4f {
reg = <ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
label = "charger_thermistor";
};
};
&pm6150_adc_tm {
status = "okay";
charger-thermistor@0 {
reg = <0>;
io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
thermistor@1 {
reg = <1>;
io-channels = <&pm6150_adc ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
&pm6150_pon {
status = "disabled";
};
&qupv3_id_0 {
status = "okay";
};
&qupv3_id_1 {
status = "okay";
};
&remoteproc_mpss {
firmware-name = "qcom/sc7180/acer/aspire1/qcmpss7180_nm.mbn";
status = "okay";
};
&sdhc_1 {
pinctrl-0 = <&sdc1_default>;
pinctrl-1 = <&sdc1_sleep>;
pinctrl-names = "default", "sleep";
vmmc-supply = <&vreg_l19a_2p9>;
vqmmc-supply = <&vreg_l12a_1p8>;
status = "okay";
};
&uart3 {
/delete-property/interrupts;
interrupts-extended = <&intc GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>,
<&tlmm 41 IRQ_TYPE_EDGE_FALLING>;
pinctrl-1 = <&qup_uart3_sleep>;
pinctrl-names = "default", "sleep";
status = "okay";
bluetooth: bluetooth {
compatible = "qcom,wcn3991-bt";
vddio-supply = <&vreg_l10a_1p8>;
vddxo-supply = <&vreg_l1c_1p8>;
vddrf-supply = <&vreg_l2c_1p3>;
vddch0-supply = <&vreg_l10c_3p3>;
max-speed = <3200000>;
};
};
&uart8 {
status = "okay";
};
&usb_1 {
status = "okay";
};
&usb_1_dwc3 {
dr_mode = "host";
#address-cells = <1>;
#size-cells = <0>;
usb_hub_2_x: hub@1 {
compatible = "usbbda,5411";
reg = <1>;
peer-hub = <&usb_hub_3_x>;
};
usb_hub_3_x: hub@2 {
compatible = "usbbda,411";
reg = <2>;
peer-hub = <&usb_hub_2_x>;
};
};
&usb_1_hsphy {
vdd-supply = <&vreg_l4a_0p8>;
vdda-pll-supply = <&vreg_l11a_1p8>;
vdda-phy-dpdm-supply = <&vreg_l17a_3p0>;
qcom,imp-res-offset-value = <8>;
qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_15_PERCENT>;
qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
qcom,bias-ctrl-value = <0x22>;
qcom,charge-ctrl-value = <3>;
qcom,hsdisc-trim-value = <0>;
status = "okay";
};
&usb_1_qmpphy {
vdda-phy-supply = <&vreg_l3c_1p2>;
vdda-pll-supply = <&vreg_l4a_0p8>;
status = "okay";
};
&venus {
firmware-name = "qcom/sc7180/acer/aspire1/qcvss7180.mbn";
};
&wifi {
vdd-0.8-cx-mx-supply = <&vreg_l9a_0p6>;
vdd-1.8-xo-supply = <&vreg_l1c_1p8>;
vdd-1.3-rfa-supply = <&vreg_l2c_1p3>;
vdd-3.3-ch0-supply = <&vreg_l10c_3p3>;
vdd-3.3-ch1-supply = <&vreg_l11c_3p3>;
status = "okay";
};
&apps_rsc {
regulators-0 {
compatible = "qcom,pm6150-rpmh-regulators";
qcom,pmic-id = "a";
vreg_s1a_1p1: smps1 {
regulator-min-microvolt = <1128000>;
regulator-max-microvolt = <1128000>;
};
vreg_l4a_0p8: ldo4 {
regulator-min-microvolt = <824000>;
regulator-max-microvolt = <928000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9a_0p6: ldo9 {
regulator-min-microvolt = <488000>;
regulator-max-microvolt = <800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10a_1p8: ldo10 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
regulator-always-on;
regulator-boot-on;
};
vreg_l11a_1p8: ldo11 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l12a_1p8: ldo12 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l13a_1p8: ldo13 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l14a_1p8: ldo14 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l15a_1p8: ldo15 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l16a_2p7: ldo16 {
regulator-min-microvolt = <2496000>;
regulator-max-microvolt = <3304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l17a_3p0: ldo17 {
regulator-min-microvolt = <2920000>;
regulator-max-microvolt = <3232000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l18a_2p8: ldo18 {
regulator-min-microvolt = <2496000>;
regulator-max-microvolt = <3304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l19a_2p9: ldo19 {
regulator-min-microvolt = <2960000>;
regulator-max-microvolt = <2960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
regulators-1 {
compatible = "qcom,pm6150l-rpmh-regulators";
qcom,pmic-id = "c";
vreg_s8c_1p3: smps8 {
regulator-min-microvolt = <1120000>;
regulator-max-microvolt = <1408000>;
};
vreg_l1c_1p8: ldo1 {
regulator-min-microvolt = <1616000>;
regulator-max-microvolt = <1984000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l2c_1p3: ldo2 {
regulator-min-microvolt = <1168000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l3c_1p2: ldo3 {
regulator-min-microvolt = <1144000>;
regulator-max-microvolt = <1304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l4c_1p8: ldo4 {
regulator-min-microvolt = <1648000>;
regulator-max-microvolt = <3304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
vreg_l5c_1p8: ldo5 {
regulator-min-microvolt = <1648000>;
regulator-max-microvolt = <3304000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
vreg_l6c_2p9: ldo6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <2950000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l7c_3p0: ldo7 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3312000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
vreg_l8c_1p8: ldo8 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l9c_2p9: ldo9 {
regulator-min-microvolt = <2952000>;
regulator-max-microvolt = <2952000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l10c_3p3: ldo10 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3400000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_l11c_3p3: ldo11 {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3400000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
vreg_bob: bob {
regulator-min-microvolt = <3008000>;
regulator-max-microvolt = <3960000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
};
};
};
&qup_i2c2_default {
drive-strength = <2>;
/* Has external pullup */
bias-disable;
};
&qup_i2c4_default {
drive-strength = <2>;
/* Has external pullup */
bias-disable;
};
&qup_i2c9_default {
drive-strength = <2>;
/* Has external pullup */
bias-disable;
};
&qup_i2c10_default {
drive-strength = <2>;
/* Has external pullup */
bias-disable;
};
&tlmm {
/*
* The TZ seem to protect those because some boards can have
* fingerprint sensor connected to this range. Not connected
* on this board
*/
gpio-reserved-ranges = <58 5>;
amp_sd_mode_default: amp-sd-mode-deault-state {
pins = "gpio23";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
bridge_en_default: bridge-en-default-state {
pins = "gpio51";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
bridge_suspend_default: bridge-suspend-default-state {
pins = "gpio22";
function = "gpio";
drive-strength = <16>;
bias-pull-up;
};
codec_irq_default: codec-irq-deault-state {
pins = "gpio28";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
edp_bridge_irq_default: edp-bridge-irq-default-state {
pins = "gpio11";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
hid_keyboard_default: hid-keyboard-default-state {
pins = "gpio33";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
hid_touchpad_default: hid-touchpad-default-state {
pins = "gpio94";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
qup_uart3_sleep: qup-uart3-sleep-state {
cts-pins {
/*
* Configure a pull-down on CTS to match the pull of
* the Bluetooth module.
*/
pins = "gpio38";
function = "gpio";
bias-pull-down;
};
rts-pins {
/*
* Configure pull-down on RTS. As RTS is active low
* signal, pull it low to indicate the BT SoC that it
* can wakeup the system anytime from suspend state by
* pulling RX low (by sending wakeup bytes).
*/
pins = "gpio39";
function = "gpio";
bias-pull-down;
};
tx-pins {
/*
* Configure pull-up on TX when it isn't actively driven
* to prevent BT SoC from receiving garbage during sleep.
*/
pins = "gpio40";
function = "gpio";
bias-pull-up;
};
rx-pins {
/*
* Configure a pull-up on RX. This is needed to avoid
* garbage data when the TX pin of the Bluetooth module
* is floating which may cause spurious wakeups.
*/
pins = "gpio41";
function = "gpio";
bias-pull-up;
};
};
reg_edp_1p2_en_default: reg-edp-1p2-en-deault-state {
pins = "gpio19";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
reg_edp_1p8_en_default: reg-edp-1p8-en-deault-state {
pins = "gpio20";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
reg_lcm_en_default: reg-lcm-en-deault-state {
pins = "gpio26";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
reg_audio_en_default: reg-audio-en-deault-state {
pins = "gpio83";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
reg_tp_en_default: reg-tp-en-deault-state {
pins = "gpio25";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
soc_bkoff_default: soc-bkoff-deault-state {
pins = "gpio10";
function = "gpio";
drive-strength = <16>;
bias-disable;
};
sdc1_default: sdc1-default-state {
clk-pins {
pins = "sdc1_clk";
drive-strength = <16>;
bias-disable;
};
cmd-pins {
pins = "sdc1_cmd";
drive-strength = <16>;
bias-pull-up;
};
data-pins {
pins = "sdc1_data";
drive-strength = <16>;
bias-pull-up;
};
rclk-pins {
pins = "sdc1_rclk";
bias-pull-down;
};
};
sdc1_sleep: sdc1-sleep-state {
clk-pins {
pins = "sdc1_clk";
drive-strength = <2>;
bias-disable;
};
cmd-pins {
pins = "sdc1_cmd";
drive-strength = <2>;
bias-pull-up;
};
data-pins {
pins = "sdc1_data";
drive-strength = <2>;
bias-pull-up;
};
rclk-pins {
pins = "sdc1_rclk";
bias-pull-down;
};
};
};