blob: fccd8fec8b8f7cd43574ad52ea4dec0fd4a250cb [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/dts-v1/;
#include "msm8939-pm8916.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Samsung Galaxy A7 (2015)";
compatible = "samsung,a7", "qcom,msm8939";
chassis-type = "handset";
aliases {
mmc0 = &sdhc_1; /* SDC1 eMMC slot */
mmc1 = &sdhc_2; /* SDC2 SD card slot */
serial0 = &blsp_uart2;
};
chosen {
stdout-path = "serial0";
};
reserved-memory {
/* Additional memory used by Samsung firmware modifications */
tz-apps@85500000 {
reg = <0x0 0x85500000 0x0 0xb00000>;
no-map;
};
};
gpio-hall-sensor {
compatible = "gpio-keys";
pinctrl-0 = <&gpio_hall_sensor_default>;
pinctrl-names = "default";
label = "GPIO Hall Effect Sensor";
event-hall-sensor {
label = "Hall Effect Sensor";
gpios = <&tlmm 52 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
linux,code = <SW_LID>;
linux,can-disable;
};
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-0 = <&gpio_keys_default>;
pinctrl-names = "default";
label = "GPIO Buttons";
button-volume-up {
label = "Volume Up";
gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
button-home {
label = "Home";
gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOMEPAGE>;
};
};
i2c-fg {
compatible = "i2c-gpio";
sda-gpios = <&tlmm 106 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
scl-gpios = <&tlmm 105 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
pinctrl-0 = <&fg_i2c_default>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
battery@35 {
compatible = "richtek,rt5033-battery";
reg = <0x35>;
interrupt-parent = <&tlmm>;
interrupts = <121 IRQ_TYPE_EDGE_BOTH>;
pinctrl-0 = <&fg_alert_default>;
pinctrl-names = "default";
};
};
i2c-nfc {
compatible = "i2c-gpio";
sda-gpios = <&tlmm 0 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
scl-gpios = <&tlmm 1 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
pinctrl-0 = <&nfc_i2c_default>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
nfc@2b {
compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
reg = <0x2b>;
interrupt-parent = <&tlmm>;
interrupts = <21 IRQ_TYPE_EDGE_RISING>;
enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
firmware-gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
pinctrl-0 = <&nfc_default>;
pinctrl-names = "default";
};
};
i2c-sensor {
compatible = "i2c-gpio";
sda-gpios = <&tlmm 84 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
scl-gpios = <&tlmm 85 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
pinctrl-0 = <&sensor_i2c_default>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
accelerometer: accelerometer@10 {
compatible = "bosch,bmc150_accel";
reg = <0x10>;
interrupt-parent = <&tlmm>;
interrupts = <115 IRQ_TYPE_EDGE_RISING>;
vdd-supply = <&pm8916_l17>;
vddio-supply = <&pm8916_l5>;
pinctrl-0 = <&accel_int_default>;
pinctrl-names = "default";
mount-matrix = "-1", "0", "0",
"0", "-1", "0",
"0", "0", "1";
};
magnetometer@12 {
compatible = "bosch,bmc150_magn";
reg = <0x12>;
vdd-supply = <&pm8916_l17>;
vddio-supply = <&pm8916_l5>;
};
};
i2c-tkey {
compatible = "i2c-gpio";
sda-gpios = <&tlmm 16 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
scl-gpios = <&tlmm 17 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
pinctrl-0 = <&tkey_i2c_default>;
pinctrl-names = "default";
#address-cells = <1>;
#size-cells = <0>;
touchkey@20 {
/* Note: Actually an ABOV MCU that implements same interface */
compatible = "coreriver,tc360-touchkey";
reg = <0x20>;
interrupt-parent = <&tlmm>;
interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
vcc-supply = <&reg_touch_key>;
vdd-supply = <&reg_keyled>;
vddio-supply = <&pm8916_l6>;
linux,keycodes = <KEY_APPSELECT KEY_BACK>;
pinctrl-0 = <&tkey_default>;
pinctrl-names = "default";
};
};
pwm_vibrator: pwm-vibrator {
compatible = "clk-pwm";
#pwm-cells = <2>;
clocks = <&gcc GCC_GP2_CLK>;
pinctrl-0 = <&motor_pwm_default>;
pinctrl-names = "default";
};
reg_keyled: regulator-keyled {
compatible = "regulator-fixed";
regulator-name = "keyled";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
/* NOTE: On some variants e.g. SM-A700FD it's GPIO 91 */
gpio = <&tlmm 100 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&tkey_led_en_default>;
pinctrl-names = "default";
};
reg_touch_key: regulator-touch-key {
compatible = "regulator-fixed";
regulator-name = "touch_key";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
gpio = <&tlmm 56 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&tkey_en_default>;
pinctrl-names = "default";
};
reg_tsp_vdd: regulator-tsp-vdd {
compatible = "regulator-fixed";
regulator-name = "tsp_vdd";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&pm8916_s4>;
gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&reg_tsp_io_en_default>;
pinctrl-names = "default";
};
reg_vdd_tsp: regulator-vdd-tsp {
compatible = "regulator-fixed";
regulator-name = "vdd_tsp";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&tlmm 73 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&reg_tsp_en_default>;
pinctrl-names = "default";
};
reg_vibrator: regulator-vibrator {
compatible = "regulator-fixed";
regulator-name = "motor_en";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>;
enable-active-high;
pinctrl-0 = <&motor_en_default>;
pinctrl-names = "default";
};
vibrator {
compatible = "pwm-vibrator";
pwms = <&pwm_vibrator 0 100000>;
pwm-names = "enable";
vcc-supply = <&reg_vibrator>;
};
};
&blsp_i2c1 {
status = "okay";
muic: extcon@25 {
compatible = "siliconmitus,sm5502-muic";
reg = <0x25>;
interrupt-parent = <&tlmm>;
interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
pinctrl-0 = <&muic_int_default>;
pinctrl-names = "default";
};
};
&blsp_i2c5 {
status = "okay";
touchscreen@24 {
compatible = "cypress,tt21000";
reg = <0x24>;
interrupt-parent = <&tlmm>;
interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
vdd-supply = <&reg_vdd_tsp>;
vddio-supply = <&reg_tsp_vdd>;
pinctrl-0 = <&tsp_int_default>;
pinctrl-names = "default";
};
};
&blsp_uart2 {
status = "okay";
};
&pm8916_resin {
linux,code = <KEY_VOLUMEDOWN>;
status = "okay";
};
&pm8916_rpm_regulators {
pm8916_l17: l17 {
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
};
&sdhc_1 {
status = "okay";
};
&sdhc_2 {
pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
pinctrl-names = "default", "sleep";
cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
status = "okay";
};
&usb {
extcon = <&muic>, <&muic>;
status = "okay";
};
&usb_hs_phy {
extcon = <&muic>;
};
&wcnss {
status = "okay";
};
&wcnss_iris {
compatible = "qcom,wcn3660b";
};
&wcnss_mem {
status = "okay";
};
&tlmm {
accel_int_default: accel-int-default-state {
pins = "gpio115";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
fg_alert_default: fg-alert-default-state {
pins = "gpio121";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
fg_i2c_default: fg-i2c-default-state {
pins = "gpio105", "gpio106";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
gpio_hall_sensor_default: gpio-hall-sensor-default-state {
pins = "gpio52";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
gpio_keys_default: gpio-keys-default-state {
pins = "gpio107", "gpio109";
function = "gpio";
drive-strength = <2>;
bias-pull-up;
};
motor_en_default: motor-en-default-state {
pins = "gpio86";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
motor_pwm_default: motor-pwm-default-state {
pins = "gpio50";
function = "gcc_gp2_clk_a";
};
muic_int_default: muic-int-default-state {
pins = "gpio12";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
nfc_default: nfc-default-state {
irq-pins {
pins = "gpio21";
function = "gpio";
drive-strength = <2>;
bias-pull-down;
};
nfc-pins {
pins = "gpio49", "gpio116";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};
nfc_i2c_default: nfc-i2c-default-state {
pins = "gpio0", "gpio1";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
reg_tsp_en_default: reg-tsp-en-default-state {
pins = "gpio73";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
reg_tsp_io_en_default: reg-tsp-io-en-default-state {
pins = "gpio8";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
sdc2_cd_default: sdc2-cd-default-state {
pins = "gpio38";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
sensor_i2c_default: sensor-i2c-default-state {
pins = "gpio84", "gpio85";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
tkey_default: tkey-default-state {
pins = "gpio20";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
tkey_en_default: tkey-en-default-state {
pins = "gpio56";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
tkey_i2c_default: tkey-i2c-default-state {
pins = "gpio16", "gpio17";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
tkey_led_en_default: tkey-led-en-default-state {
pins = "gpio100";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
tsp_int_default: tsp-int-default-state {
pins = "gpio13";
function = "gpio";
drive-strength = <2>;
bias-disable;
};
};