blob: 8355ddd7e9ae0f591d84735677034eb2cc26d80a [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 Amlogic, Inc. All rights reserved.
*/
/dts-v1/;
#include "meson-g12a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/gpio/meson-g12a-gpio.h>
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
#include <dt-bindings/sound/meson-g12a-toacodec.h>
/ {
compatible = "amlogic,u200", "amlogic,g12a";
model = "Amlogic Meson G12A U200 Development Board";
aliases {
serial0 = &uart_AO;
ethernet0 = &ethmac;
};
dioo2133: audio-amplifier-0 {
compatible = "simple-audio-amplifier";
enable-gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
VCC-supply = <&vcc_5v>;
#sound-dai-cells = <0>;
sound-name-prefix = "10U2";
};
spdif_dir: audio-codec-0 {
compatible = "linux,spdif-dir";
#sound-dai-cells = <0>;
sound-name-prefix = "DIR";
};
spdif_dit: audio-codec-1 {
compatible = "linux,spdif-dit";
#sound-dai-cells = <0>;
sound-name-prefix = "DIT";
};
chosen {
stdout-path = "serial0:115200n8";
};
cvbs-connector {
compatible = "composite-video-connector";
port {
cvbs_connector_in: endpoint {
remote-endpoint = <&cvbs_vdac_out>;
};
};
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&hdmi_tx_tmds_out>;
};
};
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
flash_1v8: regulator-flash_1v8 {
compatible = "regulator-fixed";
regulator-name = "FLASH_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc_3v3>;
regulator-always-on;
};
main_12v: regulator-main_12v {
compatible = "regulator-fixed";
regulator-name = "12V";
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
regulator-always-on;
};
usb_pwr_en: regulator-usb_pwr_en {
compatible = "regulator-fixed";
regulator-name = "USB_PWR_EN";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc_5v>;
gpio = <&gpio GPIOH_6 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vcc_1v8: regulator-vcc_1v8 {
compatible = "regulator-fixed";
regulator-name = "VCC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc_3v3>;
regulator-always-on;
};
vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
/* FIXME: actually controlled by VDDCPU_B_EN */
};
vcc_5v: regulator-vcc_5v {
compatible = "regulator-fixed";
regulator-name = "VCC_5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&main_12v>;
gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
enable-active-high;
};
vddao_1v8: regulator-vddao_1v8 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&main_12v>;
regulator-always-on;
};
vddcpu: regulator-vddcpu {
/*
* MP8756GD Regulator.
*/
compatible = "pwm-regulator";
regulator-name = "VDDCPU";
regulator-min-microvolt = <721000>;
regulator-max-microvolt = <1022000>;
pwm-supply = <&main_12v>;
pwms = <&pwm_AO_cd 1 1250 0>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
regulator-always-on;
};
sound {
compatible = "amlogic,axg-sound-card";
model = "U200";
audio-widgets = "Line", "Lineout";
audio-aux-devs = <&tdmout_a>, <&tdmout_b>, <&tdmout_c>,
<&tdmin_a>, <&tdmin_b>, <&tdmin_c>,
<&tdmin_lb>, <&dioo2133>;
audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
"TDMOUT_A IN 1", "FRDDR_B OUT 0",
"TDMOUT_A IN 2", "FRDDR_C OUT 0",
"TDM_A Playback", "TDMOUT_A OUT",
"TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT",
"TDMOUT_C IN 0", "FRDDR_A OUT 2",
"TDMOUT_C IN 1", "FRDDR_B OUT 2",
"TDMOUT_C IN 2", "FRDDR_C OUT 2",
"TDM_C Playback", "TDMOUT_C OUT",
"SPDIFOUT_A IN 0", "FRDDR_A OUT 3",
"SPDIFOUT_A IN 1", "FRDDR_B OUT 3",
"SPDIFOUT_A IN 2", "FRDDR_C OUT 3",
"SPDIFOUT_B IN 0", "FRDDR_A OUT 4",
"SPDIFOUT_B IN 1", "FRDDR_B OUT 4",
"SPDIFOUT_B IN 2", "FRDDR_C OUT 4",
"TDMIN_A IN 0", "TDM_A Capture",
"TDMIN_A IN 1", "TDM_B Capture",
"TDMIN_A IN 2", "TDM_C Capture",
"TDMIN_A IN 3", "TDM_A Loopback",
"TDMIN_A IN 4", "TDM_B Loopback",
"TDMIN_A IN 5", "TDM_C Loopback",
"TDMIN_B IN 0", "TDM_A Capture",
"TDMIN_B IN 1", "TDM_B Capture",
"TDMIN_B IN 2", "TDM_C Capture",
"TDMIN_B IN 3", "TDM_A Loopback",
"TDMIN_B IN 4", "TDM_B Loopback",
"TDMIN_B IN 5", "TDM_C Loopback",
"TDMIN_C IN 0", "TDM_A Capture",
"TDMIN_C IN 1", "TDM_B Capture",
"TDMIN_C IN 2", "TDM_C Capture",
"TDMIN_C IN 3", "TDM_A Loopback",
"TDMIN_C IN 4", "TDM_B Loopback",
"TDMIN_C IN 5", "TDM_C Loopback",
"TDMIN_LB IN 3", "TDM_A Capture",
"TDMIN_LB IN 4", "TDM_B Capture",
"TDMIN_LB IN 5", "TDM_C Capture",
"TDMIN_LB IN 0", "TDM_A Loopback",
"TDMIN_LB IN 1", "TDM_B Loopback",
"TDMIN_LB IN 2", "TDM_C Loopback",
"TODDR_A IN 0", "TDMIN_A OUT",
"TODDR_B IN 0", "TDMIN_A OUT",
"TODDR_C IN 0", "TDMIN_A OUT",
"TODDR_A IN 1", "TDMIN_B OUT",
"TODDR_B IN 1", "TDMIN_B OUT",
"TODDR_C IN 1", "TDMIN_B OUT",
"TODDR_A IN 2", "TDMIN_C OUT",
"TODDR_B IN 2", "TDMIN_C OUT",
"TODDR_C IN 2", "TDMIN_C OUT",
"TODDR_A IN 3", "SPDIFIN Capture",
"TODDR_B IN 3", "SPDIFIN Capture",
"TODDR_C IN 3", "SPDIFIN Capture",
"TODDR_A IN 6", "TDMIN_LB OUT",
"TODDR_B IN 6", "TDMIN_LB OUT",
"TODDR_C IN 6", "TDMIN_LB OUT",
"10U2 INL", "ACODEC LOLP",
"10U2 INR", "ACODEC LORP",
"Lineout", "10U2 OUTL",
"Lineout", "10U2 OUTR";
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
assigned-clock-parents = <0>, <0>, <0>;
assigned-clock-rates = <294912000>,
<270950400>,
<393216000>;
dai-link-0 {
sound-dai = <&frddr_a>;
};
dai-link-1 {
sound-dai = <&frddr_b>;
};
dai-link-2 {
sound-dai = <&frddr_c>;
};
dai-link-3 {
sound-dai = <&toddr_a>;
};
dai-link-4 {
sound-dai = <&toddr_b>;
};
dai-link-5 {
sound-dai = <&toddr_c>;
};
/* Connected to the WIFI/BT chip */
dai-link-6 {
sound-dai = <&tdmif_a>;
dai-format = "dsp_a";
dai-tdm-slot-tx-mask-0 = <1 1>;
mclk-fs = <256>;
codec-0 {
sound-dai = <&toacodec TOACODEC_IN_A>;
};
codec-1 {
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_A>;
};
};
/* Connected to the onboard AD82584F DAC */
dai-link-7 {
sound-dai = <&tdmif_b>;
dai-format = "i2s";
dai-tdm-slot-tx-mask-0 = <1 1>;
mclk-fs = <256>;
codec-0 {
sound-dai = <&toacodec TOACODEC_IN_B>;
};
codec-1 {
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
};
};
/* 8ch HDMI interface */
dai-link-8 {
sound-dai = <&tdmif_c>;
dai-format = "i2s";
dai-tdm-slot-tx-mask-0 = <1 1>;
dai-tdm-slot-tx-mask-1 = <1 1>;
dai-tdm-slot-tx-mask-2 = <1 1>;
dai-tdm-slot-tx-mask-3 = <1 1>;
mclk-fs = <256>;
codec-0 {
sound-dai = <&toacodec TOACODEC_IN_C>;
};
codec-1 {
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_C>;
};
};
/* spdif hdmi and coax output */
dai-link-9 {
sound-dai = <&spdifout_a>;
codec-0 {
sound-dai = <&spdif_dit>;
};
codec-1 {
sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
};
};
/* spdif hdmi interface */
dai-link-10 {
sound-dai = <&spdifout_b>;
codec {
sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
};
};
/* hdmi glue */
dai-link-11 {
sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
codec {
sound-dai = <&hdmi_tx>;
};
};
/* internal codec glue */
dai-link-12 {
sound-dai = <&toacodec TOACODEC_OUT>;
codec {
sound-dai = <&acodec>;
};
};
/* spdif coax input */
dai-link-13 {
sound-dai = <&spdifin>;
codec {
sound-dai = <&spdif_dir>;
};
};
};
};
&acodec {
status = "okay";
};
&arb {
status = "okay";
};
&cec_AO {
pinctrl-0 = <&cec_ao_a_h_pins>;
pinctrl-names = "default";
status = "disabled";
hdmi-phandle = <&hdmi_tx>;
};
&cecb_AO {
pinctrl-0 = <&cec_ao_b_h_pins>;
pinctrl-names = "default";
status = "okay";
hdmi-phandle = <&hdmi_tx>;
};
&clkc_audio {
status = "okay";
};
&cpu0 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&cpu1 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&cpu2 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&cpu3 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&clkc_audio {
status = "okay";
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
};
};
&ethmac {
status = "okay";
phy-handle = <&internal_ephy>;
phy-mode = "rmii";
};
&frddr_a {
status = "okay";
};
&frddr_b {
status = "okay";
};
&frddr_c {
status = "okay";
};
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
pinctrl-names = "default";
hdmi-supply = <&vcc_5v>;
};
&hdmi_tx_tmds_port {
hdmi_tx_tmds_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
};
/* i2c Touch */
&i2c0 {
status = "okay";
pinctrl-0 = <&i2c0_sda_z0_pins>, <&i2c0_sck_z1_pins>;
pinctrl-names = "default";
};
/* i2c CM */
&i2c2 {
status = "okay";
pinctrl-0 = <&i2c2_sda_z_pins>, <&i2c2_sck_z_pins>;
pinctrl-names = "default";
};
/* i2c Audio */
&i2c3 {
status = "okay";
pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
pinctrl-names = "default";
};
&pwm_AO_cd {
pinctrl-0 = <&pwm_ao_d_e_pins>;
pinctrl-names = "default";
clocks = <&xtal>;
clock-names = "clkin1";
status = "okay";
};
/* SD card */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_c_pins>;
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <50000000>;
disable-wp;
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddao_3v3>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-mmc-highspeed;
mmc-ddr-1_8v;
mmc-hs200-1_8v;
max-frequency = <200000000>;
non-removable;
disable-wp;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&flash_1v8>;
};
&spdifin {
pinctrl-0 = <&spdif_in_h_pins>;
pinctrl-names = "default";
status = "okay";
};
&spdifout_a {
pinctrl-0 = <&spdif_ao_out_pins>;
pinctrl-names = "default";
status = "okay";
};
&spdifout_b {
status = "okay";
};
&tdmif_a {
pinctrl-0 = <&tdm_a_fs_pins>, <&tdm_a_sclk_pins>, <&tdm_a_dout0_pins> ;
pinctrl-names = "default";
status = "okay";
};
&tdmif_b {
pinctrl-0 = <&mclk0_a_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>,
<&tdm_b_dout0_pins>;
pinctrl-names = "default";
status = "okay";
assigned-clocks = <&clkc_audio AUD_CLKID_TDM_MCLK_PAD0>,
<&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>,
<&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>;
assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
<&clkc_audio AUD_CLKID_MST_B_SCLK>,
<&clkc_audio AUD_CLKID_MST_B_LRCLK>;
assigned-clock-rates = <0>, <0>, <0>;
};
&tdmif_c {
status = "okay";
};
&tdmin_a {
status = "okay";
};
&tdmin_b {
status = "okay";
};
&tdmin_c {
status = "okay";
};
&tdmin_lb {
status = "okay";
};
&tdmout_a {
status = "okay";
};
&tdmout_b {
status = "okay";
};
&tdmout_c {
status = "okay";
};
&toacodec {
status = "okay";
};
&toddr_a {
status = "okay";
};
&toddr_b {
status = "okay";
};
&toddr_c {
status = "okay";
};
&tohdmitx {
status = "okay";
};
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
&usb {
status = "okay";
vbus-supply = <&usb_pwr_en>;
};
&usb2_phy0 {
phy-supply = <&vcc_5v>;
};
&usb2_phy1 {
phy-supply = <&vcc_5v>;
};