blob: a49aa62e3f9fb7d7fdaea699823a0e3bcc65b862 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2017 Amlogic, Inc. All rights reserved.
*/
#include <dt-bindings/clock/axg-aoclkc.h>
#include <dt-bindings/clock/axg-audio-clkc.h>
#include <dt-bindings/clock/axg-clkc.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/gpio/meson-axg-gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
#include <dt-bindings/reset/amlogic,meson-axg-reset.h>
#include <dt-bindings/power/meson-axg-power.h>
/ {
compatible = "amlogic,meson-axg";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
tdmif_a: audio-controller-0 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = <0>;
sound-name-prefix = "TDM_A";
clocks = <&clkc_audio AUD_CLKID_MST_A_MCLK>,
<&clkc_audio AUD_CLKID_MST_A_SCLK>,
<&clkc_audio AUD_CLKID_MST_A_LRCLK>;
clock-names = "mclk", "sclk", "lrclk";
status = "disabled";
};
tdmif_b: audio-controller-1 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = <0>;
sound-name-prefix = "TDM_B";
clocks = <&clkc_audio AUD_CLKID_MST_B_MCLK>,
<&clkc_audio AUD_CLKID_MST_B_SCLK>,
<&clkc_audio AUD_CLKID_MST_B_LRCLK>;
clock-names = "mclk", "sclk", "lrclk";
status = "disabled";
};
tdmif_c: audio-controller-2 {
compatible = "amlogic,axg-tdm-iface";
#sound-dai-cells = <0>;
sound-name-prefix = "TDM_C";
clocks = <&clkc_audio AUD_CLKID_MST_C_MCLK>,
<&clkc_audio AUD_CLKID_MST_C_SCLK>,
<&clkc_audio AUD_CLKID_MST_C_LRCLK>;
clock-names = "mclk", "sclk", "lrclk";
status = "disabled";
};
arm-pmu {
compatible = "arm,cortex-a53-pmu";
interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
};
cpus {
#address-cells = <0x2>;
#size-cells = <0x0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
};
cpu1: cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
};
cpu2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x2>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
};
cpu3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x3>;
enable-method = "psci";
next-level-cache = <&l2>;
clocks = <&scpi_dvfs 0>;
};
l2: l2-cache0 {
compatible = "cache";
cache-level = <2>;
cache-unified;
};
};
sm: secure-monitor {
compatible = "amlogic,meson-gxbb-sm";
};
efuse: efuse {
compatible = "amlogic,meson-gxbb-efuse";
clocks = <&clkc CLKID_EFUSE>;
#address-cells = <1>;
#size-cells = <1>;
read-only;
secure-monitor = <&sm>;
};
psci {
compatible = "arm,psci-1.0";
method = "smc";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
/* 16 MiB reserved for Hardware ROM Firmware */
hwrom_reserved: hwrom@0 {
reg = <0x0 0x0 0x0 0x1000000>;
no-map;
};
/* Alternate 3 MiB reserved for ARM Trusted Firmware (BL31) */
secmon_reserved: secmon@5000000 {
reg = <0x0 0x05000000 0x0 0x300000>;
no-map;
};
};
scpi {
compatible = "arm,scpi-pre-1.0";
mboxes = <&mailbox 1 &mailbox 2>;
shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
scpi_clocks: clocks {
compatible = "arm,scpi-clocks";
scpi_dvfs: clocks-0 {
compatible = "arm,scpi-dvfs-clocks";
#clock-cells = <1>;
clock-indices = <0>;
clock-output-names = "vcpu";
};
};
scpi_sensors: sensors {
compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
#thermal-sensor-cells = <1>;
};
};
soc {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
pcieA: pcie@f9800000 {
compatible = "amlogic,axg-pcie", "snps,dw-pcie";
reg = <0x0 0xf9800000 0x0 0x400000>,
<0x0 0xff646000 0x0 0x2000>,
<0x0 0xf9f00000 0x0 0x100000>;
reg-names = "elbi", "cfg", "config";
interrupts = <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 179 IRQ_TYPE_EDGE_RISING>;
bus-range = <0x0 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x82000000 0 0xf9c00000 0x0 0xf9c00000 0 0x00300000>;
clocks = <&clkc CLKID_USB>, <&clkc CLKID_PCIE_A>, <&clkc CLKID_PCIE_CML_EN0>;
clock-names = "general", "pclk", "port";
resets = <&reset RESET_PCIE_A>, <&reset RESET_PCIE_APB>;
reset-names = "port", "apb";
num-lanes = <1>;
phys = <&pcie_phy>;
phy-names = "pcie";
status = "disabled";
};
pcieB: pcie@fa000000 {
compatible = "amlogic,axg-pcie", "snps,dw-pcie";
reg = <0x0 0xfa000000 0x0 0x400000>,
<0x0 0xff648000 0x0 0x2000>,
<0x0 0xfa400000 0x0 0x100000>;
reg-names = "elbi", "cfg", "config";
interrupts = <GIC_SPI 167 IRQ_TYPE_EDGE_RISING>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &gic GIC_SPI 169 IRQ_TYPE_EDGE_RISING>;
bus-range = <0x0 0xff>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x82000000 0 0xfa500000 0x0 0xfa500000 0 0x00300000>;
clocks = <&clkc CLKID_USB>, <&clkc CLKID_PCIE_B>, <&clkc CLKID_PCIE_CML_EN1>;
clock-names = "general", "pclk", "port";
resets = <&reset RESET_PCIE_B>, <&reset RESET_PCIE_APB>;
reset-names = "port", "apb";
num-lanes = <1>;
phys = <&pcie_phy>;
phy-names = "pcie";
status = "disabled";
};
usb: usb@ffe09080 {
compatible = "amlogic,meson-axg-usb-ctrl";
reg = <0x0 0xffe09080 0x0 0x20>;
interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <2>;
#size-cells = <2>;
ranges;
clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1_DDR_BRIDGE>;
clock-names = "usb_ctrl", "ddr";
resets = <&reset RESET_USB_OTG>;
dr_mode = "otg";
phys = <&usb2_phy1>;
phy-names = "usb2-phy1";
dwc2: usb@ff400000 {
compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
reg = <0x0 0xff400000 0x0 0x40000>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_USB1>;
clock-names = "otg";
phys = <&usb2_phy1>;
dr_mode = "peripheral";
g-rx-fifo-size = <192>;
g-np-tx-fifo-size = <128>;
g-tx-fifo-size = <128 128 16 16 16>;
};
dwc3: usb@ff500000 {
compatible = "snps,dwc3";
reg = <0x0 0xff500000 0x0 0x100000>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
dr_mode = "host";
maximum-speed = "high-speed";
snps,dis_u2_susphy_quirk;
};
};
ethmac: ethernet@ff3f0000 {
compatible = "amlogic,meson-axg-dwmac",
"snps,dwmac-3.70a",
"snps,dwmac";
reg = <0x0 0xff3f0000 0x0 0x10000>,
<0x0 0xff634540 0x0 0x8>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
clocks = <&clkc CLKID_ETH>,
<&clkc CLKID_FCLK_DIV2>,
<&clkc CLKID_MPLL2>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "stmmaceth", "clkin0", "clkin1",
"timing-adjustment";
rx-fifo-depth = <4096>;
tx-fifo-depth = <2048>;
power-domains = <&pwrc PWRC_AXG_ETHERNET_MEM_ID>;
status = "disabled";
};
pcie_phy: phy@ff644000 {
compatible = "amlogic,axg-pcie-phy";
reg = <0x0 0xff644000 0x0 0x1c>;
resets = <&reset RESET_PCIE_PHY>;
phys = <&mipi_pcie_analog_dphy>;
phy-names = "analog";
#phy-cells = <0>;
};
pdm: audio-controller@ff632000 {
compatible = "amlogic,axg-pdm";
reg = <0x0 0xff632000 0x0 0x34>;
#sound-dai-cells = <0>;
sound-name-prefix = "PDM";
clocks = <&clkc_audio AUD_CLKID_PDM>,
<&clkc_audio AUD_CLKID_PDM_DCLK>,
<&clkc_audio AUD_CLKID_PDM_SYSCLK>;
clock-names = "pclk", "dclk", "sysclk";
status = "disabled";
};
periphs: bus@ff634000 {
compatible = "simple-bus";
reg = <0x0 0xff634000 0x0 0x2000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
hwrng: rng@18 {
compatible = "amlogic,meson-rng";
reg = <0x0 0x18 0x0 0x4>;
clocks = <&clkc CLKID_RNG0>;
clock-names = "core";
};
pinctrl_periphs: pinctrl@480 {
compatible = "amlogic,meson-axg-periphs-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio: bank@480 {
reg = <0x0 0x00480 0x0 0x40>,
<0x0 0x004e8 0x0 0x14>,
<0x0 0x00520 0x0 0x14>,
<0x0 0x00430 0x0 0x3c>;
reg-names = "mux", "pull", "pull-enable", "gpio";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_periphs 0 0 86>;
};
i2c0_pins: i2c0 {
mux {
groups = "i2c0_sck",
"i2c0_sda";
function = "i2c0";
bias-disable;
};
};
i2c1_x_pins: i2c1_x {
mux {
groups = "i2c1_sck_x",
"i2c1_sda_x";
function = "i2c1";
bias-disable;
};
};
i2c1_z_pins: i2c1_z {
mux {
groups = "i2c1_sck_z",
"i2c1_sda_z";
function = "i2c1";
bias-disable;
};
};
i2c2_a_pins: i2c2_a {
mux {
groups = "i2c2_sck_a",
"i2c2_sda_a";
function = "i2c2";
bias-disable;
};
};
i2c2_x_pins: i2c2_x {
mux {
groups = "i2c2_sck_x",
"i2c2_sda_x";
function = "i2c2";
bias-disable;
};
};
i2c3_a6_pins: i2c3_a6 {
mux {
groups = "i2c3_sda_a6",
"i2c3_sck_a7";
function = "i2c3";
bias-disable;
};
};
i2c3_a12_pins: i2c3_a12 {
mux {
groups = "i2c3_sda_a12",
"i2c3_sck_a13";
function = "i2c3";
bias-disable;
};
};
i2c3_a19_pins: i2c3_a19 {
mux {
groups = "i2c3_sda_a19",
"i2c3_sck_a20";
function = "i2c3";
bias-disable;
};
};
emmc_pins: emmc {
mux-0 {
groups = "emmc_nand_d0",
"emmc_nand_d1",
"emmc_nand_d2",
"emmc_nand_d3",
"emmc_nand_d4",
"emmc_nand_d5",
"emmc_nand_d6",
"emmc_nand_d7",
"emmc_cmd";
function = "emmc";
bias-pull-up;
};
mux-1 {
groups = "emmc_clk";
function = "emmc";
bias-disable;
};
};
emmc_ds_pins: emmc_ds {
mux {
groups = "emmc_ds";
function = "emmc";
bias-pull-down;
};
};
emmc_clk_gate_pins: emmc_clk_gate {
mux {
groups = "BOOT_8";
function = "gpio_periphs";
bias-pull-down;
};
};
eth_rgmii_x_pins: eth-x-rgmii {
mux {
groups = "eth_mdio_x",
"eth_mdc_x",
"eth_rgmii_rx_clk_x",
"eth_rx_dv_x",
"eth_rxd0_x",
"eth_rxd1_x",
"eth_rxd2_rgmii",
"eth_rxd3_rgmii",
"eth_rgmii_tx_clk",
"eth_txen_x",
"eth_txd0_x",
"eth_txd1_x",
"eth_txd2_rgmii",
"eth_txd3_rgmii";
function = "eth";
bias-disable;
};
};
eth_rgmii_y_pins: eth-y-rgmii {
mux {
groups = "eth_mdio_y",
"eth_mdc_y",
"eth_rgmii_rx_clk_y",
"eth_rx_dv_y",
"eth_rxd0_y",
"eth_rxd1_y",
"eth_rxd2_rgmii",
"eth_rxd3_rgmii",
"eth_rgmii_tx_clk",
"eth_txen_y",
"eth_txd0_y",
"eth_txd1_y",
"eth_txd2_rgmii",
"eth_txd3_rgmii";
function = "eth";
bias-disable;
};
};
eth_rmii_x_pins: eth-x-rmii {
mux {
groups = "eth_mdio_x",
"eth_mdc_x",
"eth_rgmii_rx_clk_x",
"eth_rx_dv_x",
"eth_rxd0_x",
"eth_rxd1_x",
"eth_txen_x",
"eth_txd0_x",
"eth_txd1_x";
function = "eth";
bias-disable;
};
};
eth_rmii_y_pins: eth-y-rmii {
mux {
groups = "eth_mdio_y",
"eth_mdc_y",
"eth_rgmii_rx_clk_y",
"eth_rx_dv_y",
"eth_rxd0_y",
"eth_rxd1_y",
"eth_txen_y",
"eth_txd0_y",
"eth_txd1_y";
function = "eth";
bias-disable;
};
};
mclk_b_pins: mclk_b {
mux {
groups = "mclk_b";
function = "mclk_b";
bias-disable;
};
};
mclk_c_pins: mclk_c {
mux {
groups = "mclk_c";
function = "mclk_c";
bias-disable;
};
};
pdm_dclk_a14_pins: pdm_dclk_a14 {
mux {
groups = "pdm_dclk_a14";
function = "pdm";
bias-disable;
};
};
pdm_dclk_a19_pins: pdm_dclk_a19 {
mux {
groups = "pdm_dclk_a19";
function = "pdm";
bias-disable;
};
};
pdm_din0_pins: pdm_din0 {
mux {
groups = "pdm_din0";
function = "pdm";
bias-disable;
};
};
pdm_din1_pins: pdm_din1 {
mux {
groups = "pdm_din1";
function = "pdm";
bias-disable;
};
};
pdm_din2_pins: pdm_din2 {
mux {
groups = "pdm_din2";
function = "pdm";
bias-disable;
};
};
pdm_din3_pins: pdm_din3 {
mux {
groups = "pdm_din3";
function = "pdm";
bias-disable;
};
};
pwm_a_a_pins: pwm_a_a {
mux {
groups = "pwm_a_a";
function = "pwm_a";
bias-disable;
};
};
pwm_a_x18_pins: pwm_a_x18 {
mux {
groups = "pwm_a_x18";
function = "pwm_a";
bias-disable;
};
};
pwm_a_x20_pins: pwm_a_x20 {
mux {
groups = "pwm_a_x20";
function = "pwm_a";
bias-disable;
};
};
pwm_a_z_pins: pwm_a_z {
mux {
groups = "pwm_a_z";
function = "pwm_a";
bias-disable;
};
};
pwm_b_a_pins: pwm_b_a {
mux {
groups = "pwm_b_a";
function = "pwm_b";
bias-disable;
};
};
pwm_b_x_pins: pwm_b_x {
mux {
groups = "pwm_b_x";
function = "pwm_b";
bias-disable;
};
};
pwm_b_z_pins: pwm_b_z {
mux {
groups = "pwm_b_z";
function = "pwm_b";
bias-disable;
};
};
pwm_c_a_pins: pwm_c_a {
mux {
groups = "pwm_c_a";
function = "pwm_c";
bias-disable;
};
};
pwm_c_x10_pins: pwm_c_x10 {
mux {
groups = "pwm_c_x10";
function = "pwm_c";
bias-disable;
};
};
pwm_c_x17_pins: pwm_c_x17 {
mux {
groups = "pwm_c_x17";
function = "pwm_c";
bias-disable;
};
};
pwm_d_x11_pins: pwm_d_x11 {
mux {
groups = "pwm_d_x11";
function = "pwm_d";
bias-disable;
};
};
pwm_d_x16_pins: pwm_d_x16 {
mux {
groups = "pwm_d_x16";
function = "pwm_d";
bias-disable;
};
};
sdio_pins: sdio {
mux-0 {
groups = "sdio_d0",
"sdio_d1",
"sdio_d2",
"sdio_d3",
"sdio_cmd";
function = "sdio";
bias-pull-up;
};
mux-1 {
groups = "sdio_clk";
function = "sdio";
bias-disable;
};
};
sdio_clk_gate_pins: sdio_clk_gate {
mux {
groups = "GPIOX_4";
function = "gpio_periphs";
bias-pull-down;
};
};
spdif_in_z_pins: spdif_in_z {
mux {
groups = "spdif_in_z";
function = "spdif_in";
bias-disable;
};
};
spdif_in_a1_pins: spdif_in_a1 {
mux {
groups = "spdif_in_a1";
function = "spdif_in";
bias-disable;
};
};
spdif_in_a7_pins: spdif_in_a7 {
mux {
groups = "spdif_in_a7";
function = "spdif_in";
bias-disable;
};
};
spdif_in_a19_pins: spdif_in_a19 {
mux {
groups = "spdif_in_a19";
function = "spdif_in";
bias-disable;
};
};
spdif_in_a20_pins: spdif_in_a20 {
mux {
groups = "spdif_in_a20";
function = "spdif_in";
bias-disable;
};
};
spdif_out_a1_pins: spdif_out_a1 {
mux {
groups = "spdif_out_a1";
function = "spdif_out";
bias-disable;
};
};
spdif_out_a11_pins: spdif_out_a11 {
mux {
groups = "spdif_out_a11";
function = "spdif_out";
bias-disable;
};
};
spdif_out_a19_pins: spdif_out_a19 {
mux {
groups = "spdif_out_a19";
function = "spdif_out";
bias-disable;
};
};
spdif_out_a20_pins: spdif_out_a20 {
mux {
groups = "spdif_out_a20";
function = "spdif_out";
bias-disable;
};
};
spdif_out_z_pins: spdif_out_z {
mux {
groups = "spdif_out_z";
function = "spdif_out";
bias-disable;
};
};
spi0_pins: spi0 {
mux {
groups = "spi0_miso",
"spi0_mosi",
"spi0_clk";
function = "spi0";
bias-disable;
};
};
spi0_ss0_pins: spi0_ss0 {
mux {
groups = "spi0_ss0";
function = "spi0";
bias-disable;
};
};
spi0_ss1_pins: spi0_ss1 {
mux {
groups = "spi0_ss1";
function = "spi0";
bias-disable;
};
};
spi0_ss2_pins: spi0_ss2 {
mux {
groups = "spi0_ss2";
function = "spi0";
bias-disable;
};
};
spi1_a_pins: spi1_a {
mux {
groups = "spi1_miso_a",
"spi1_mosi_a",
"spi1_clk_a";
function = "spi1";
bias-disable;
};
};
spi1_ss0_a_pins: spi1_ss0_a {
mux {
groups = "spi1_ss0_a";
function = "spi1";
bias-disable;
};
};
spi1_ss1_pins: spi1_ss1 {
mux {
groups = "spi1_ss1";
function = "spi1";
bias-disable;
};
};
spi1_x_pins: spi1_x {
mux {
groups = "spi1_miso_x",
"spi1_mosi_x",
"spi1_clk_x";
function = "spi1";
bias-disable;
};
};
spi1_ss0_x_pins: spi1_ss0_x {
mux {
groups = "spi1_ss0_x";
function = "spi1";
bias-disable;
};
};
tdma_din0_pins: tdma_din0 {
mux {
groups = "tdma_din0";
function = "tdma";
bias-disable;
};
};
tdma_dout0_x14_pins: tdma_dout0_x14 {
mux {
groups = "tdma_dout0_x14";
function = "tdma";
bias-disable;
};
};
tdma_dout0_x15_pins: tdma_dout0_x15 {
mux {
groups = "tdma_dout0_x15";
function = "tdma";
bias-disable;
};
};
tdma_dout1_pins: tdma_dout1 {
mux {
groups = "tdma_dout1";
function = "tdma";
bias-disable;
};
};
tdma_din1_pins: tdma_din1 {
mux {
groups = "tdma_din1";
function = "tdma";
bias-disable;
};
};
tdma_fs_pins: tdma_fs {
mux {
groups = "tdma_fs";
function = "tdma";
bias-disable;
};
};
tdma_fs_slv_pins: tdma_fs_slv {
mux {
groups = "tdma_fs_slv";
function = "tdma";
bias-disable;
};
};
tdma_sclk_pins: tdma_sclk {
mux {
groups = "tdma_sclk";
function = "tdma";
bias-disable;
};
};
tdma_sclk_slv_pins: tdma_sclk_slv {
mux {
groups = "tdma_sclk_slv";
function = "tdma";
bias-disable;
};
};
tdmb_din0_pins: tdmb_din0 {
mux {
groups = "tdmb_din0";
function = "tdmb";
bias-disable;
};
};
tdmb_din1_pins: tdmb_din1 {
mux {
groups = "tdmb_din1";
function = "tdmb";
bias-disable;
};
};
tdmb_din2_pins: tdmb_din2 {
mux {
groups = "tdmb_din2";
function = "tdmb";
bias-disable;
};
};
tdmb_din3_pins: tdmb_din3 {
mux {
groups = "tdmb_din3";
function = "tdmb";
bias-disable;
};
};
tdmb_dout0_pins: tdmb_dout0 {
mux {
groups = "tdmb_dout0";
function = "tdmb";
bias-disable;
};
};
tdmb_dout1_pins: tdmb_dout1 {
mux {
groups = "tdmb_dout1";
function = "tdmb";
bias-disable;
};
};
tdmb_dout2_pins: tdmb_dout2 {
mux {
groups = "tdmb_dout2";
function = "tdmb";
bias-disable;
};
};
tdmb_dout3_pins: tdmb_dout3 {
mux {
groups = "tdmb_dout3";
function = "tdmb";
bias-disable;
};
};
tdmb_fs_pins: tdmb_fs {
mux {
groups = "tdmb_fs";
function = "tdmb";
bias-disable;
};
};
tdmb_fs_slv_pins: tdmb_fs_slv {
mux {
groups = "tdmb_fs_slv";
function = "tdmb";
bias-disable;
};
};
tdmb_sclk_pins: tdmb_sclk {
mux {
groups = "tdmb_sclk";
function = "tdmb";
bias-disable;
};
};
tdmb_sclk_slv_pins: tdmb_sclk_slv {
mux {
groups = "tdmb_sclk_slv";
function = "tdmb";
bias-disable;
};
};
tdmc_fs_pins: tdmc_fs {
mux {
groups = "tdmc_fs";
function = "tdmc";
bias-disable;
};
};
tdmc_fs_slv_pins: tdmc_fs_slv {
mux {
groups = "tdmc_fs_slv";
function = "tdmc";
bias-disable;
};
};
tdmc_sclk_pins: tdmc_sclk {
mux {
groups = "tdmc_sclk";
function = "tdmc";
bias-disable;
};
};
tdmc_sclk_slv_pins: tdmc_sclk_slv {
mux {
groups = "tdmc_sclk_slv";
function = "tdmc";
bias-disable;
};
};
tdmc_din0_pins: tdmc_din0 {
mux {
groups = "tdmc_din0";
function = "tdmc";
bias-disable;
};
};
tdmc_din1_pins: tdmc_din1 {
mux {
groups = "tdmc_din1";
function = "tdmc";
bias-disable;
};
};
tdmc_din2_pins: tdmc_din2 {
mux {
groups = "tdmc_din2";
function = "tdmc";
bias-disable;
};
};
tdmc_din3_pins: tdmc_din3 {
mux {
groups = "tdmc_din3";
function = "tdmc";
bias-disable;
};
};
tdmc_dout0_pins: tdmc_dout0 {
mux {
groups = "tdmc_dout0";
function = "tdmc";
bias-disable;
};
};
tdmc_dout1_pins: tdmc_dout1 {
mux {
groups = "tdmc_dout1";
function = "tdmc";
bias-disable;
};
};
tdmc_dout2_pins: tdmc_dout2 {
mux {
groups = "tdmc_dout2";
function = "tdmc";
bias-disable;
};
};
tdmc_dout3_pins: tdmc_dout3 {
mux {
groups = "tdmc_dout3";
function = "tdmc";
bias-disable;
};
};
uart_a_pins: uart_a {
mux {
groups = "uart_tx_a",
"uart_rx_a";
function = "uart_a";
bias-disable;
};
};
uart_a_cts_rts_pins: uart_a_cts_rts {
mux {
groups = "uart_cts_a",
"uart_rts_a";
function = "uart_a";
bias-disable;
};
};
uart_b_x_pins: uart_b_x {
mux {
groups = "uart_tx_b_x",
"uart_rx_b_x";
function = "uart_b";
bias-disable;
};
};
uart_b_x_cts_rts_pins: uart_b_x_cts_rts {
mux {
groups = "uart_cts_b_x",
"uart_rts_b_x";
function = "uart_b";
bias-disable;
};
};
uart_b_z_pins: uart_b_z {
mux {
groups = "uart_tx_b_z",
"uart_rx_b_z";
function = "uart_b";
bias-disable;
};
};
uart_b_z_cts_rts_pins: uart_b_z_cts_rts {
mux {
groups = "uart_cts_b_z",
"uart_rts_b_z";
function = "uart_b";
bias-disable;
};
};
uart_ao_b_z_pins: uart_ao_b_z {
mux {
groups = "uart_ao_tx_b_z",
"uart_ao_rx_b_z";
function = "uart_ao_b_z";
bias-disable;
};
};
uart_ao_b_z_cts_rts_pins: uart_ao_b_z_cts_rts {
mux {
groups = "uart_ao_cts_b_z",
"uart_ao_rts_b_z";
function = "uart_ao_b_z";
bias-disable;
};
};
};
};
hiubus: bus@ff63c000 {
compatible = "simple-bus";
reg = <0x0 0xff63c000 0x0 0x1c00>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
sysctrl: system-controller@0 {
compatible = "amlogic,meson-axg-hhi-sysctrl",
"simple-mfd", "syscon";
reg = <0 0 0 0x400>;
clkc: clock-controller {
compatible = "amlogic,axg-clkc";
#clock-cells = <1>;
clocks = <&xtal>;
clock-names = "xtal";
};
pwrc: power-controller {
compatible = "amlogic,meson-axg-pwrc";
#power-domain-cells = <1>;
amlogic,ao-sysctrl = <&sysctrl_AO>;
resets = <&reset RESET_VIU>,
<&reset RESET_VENC>,
<&reset RESET_VCBUS>,
<&reset RESET_VENCL>,
<&reset RESET_VID_LOCK>;
reset-names = "viu", "venc", "vcbus",
"vencl", "vid_lock";
clocks = <&clkc CLKID_VPU>,
<&clkc CLKID_VAPB>;
clock-names = "vpu", "vapb";
/*
* VPU clocking is provided by two identical clock paths
* VPU_0 and VPU_1 muxed to a single clock by a glitch
* free mux to safely change frequency while running.
* Same for VAPB but with a final gate after the glitch free mux.
*/
assigned-clocks = <&clkc CLKID_VPU_0_SEL>,
<&clkc CLKID_VPU_0>,
<&clkc CLKID_VPU>, /* Glitch free mux */
<&clkc CLKID_VAPB_0_SEL>,
<&clkc CLKID_VAPB_0>,
<&clkc CLKID_VAPB_SEL>; /* Glitch free mux */
assigned-clock-parents = <&clkc CLKID_FCLK_DIV4>,
<0>, /* Do Nothing */
<&clkc CLKID_VPU_0>,
<&clkc CLKID_FCLK_DIV4>,
<0>, /* Do Nothing */
<&clkc CLKID_VAPB_0>;
assigned-clock-rates = <0>, /* Do Nothing */
<250000000>,
<0>, /* Do Nothing */
<0>, /* Do Nothing */
<250000000>,
<0>; /* Do Nothing */
};
mipi_pcie_analog_dphy: phy {
compatible = "amlogic,axg-mipi-pcie-analog-phy";
#phy-cells = <0>;
status = "disabled";
};
};
};
mailbox: mailbox@ff63c404 {
compatible = "amlogic,meson-gxbb-mhu";
reg = <0 0xff63c404 0 0x4c>;
interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 210 IRQ_TYPE_EDGE_RISING>;
#mbox-cells = <1>;
};
mipi_dphy: phy@ff640000 {
compatible = "amlogic,axg-mipi-dphy";
reg = <0x0 0xff640000 0x0 0x100>;
clocks = <&clkc CLKID_MIPI_DSI_PHY>;
clock-names = "pclk";
resets = <&reset RESET_MIPI_PHY>;
reset-names = "phy";
phys = <&mipi_pcie_analog_dphy>;
phy-names = "analog";
#phy-cells = <0>;
status = "disabled";
};
audio: bus@ff642000 {
compatible = "simple-bus";
reg = <0x0 0xff642000 0x0 0x2000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xff642000 0x0 0x2000>;
clkc_audio: clock-controller@0 {
compatible = "amlogic,axg-audio-clkc";
reg = <0x0 0x0 0x0 0xb4>;
#clock-cells = <1>;
clocks = <&clkc CLKID_AUDIO>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>,
<&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL3>,
<&clkc CLKID_HIFI_PLL>,
<&clkc CLKID_FCLK_DIV3>,
<&clkc CLKID_FCLK_DIV4>,
<&clkc CLKID_GP0_PLL>;
clock-names = "pclk",
"mst_in0",
"mst_in1",
"mst_in2",
"mst_in3",
"mst_in4",
"mst_in5",
"mst_in6",
"mst_in7";
resets = <&reset RESET_AUDIO>;
};
toddr_a: audio-controller@100 {
compatible = "amlogic,axg-toddr";
reg = <0x0 0x100 0x0 0x2c>;
#sound-dai-cells = <0>;
sound-name-prefix = "TODDR_A";
interrupts = <GIC_SPI 84 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_TODDR_A>;
resets = <&arb AXG_ARB_TODDR_A>;
amlogic,fifo-depth = <512>;
status = "disabled";
};
toddr_b: audio-controller@140 {
compatible = "amlogic,axg-toddr";
reg = <0x0 0x140 0x0 0x2c>;
#sound-dai-cells = <0>;
sound-name-prefix = "TODDR_B";
interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_TODDR_B>;
resets = <&arb AXG_ARB_TODDR_B>;
amlogic,fifo-depth = <256>;
status = "disabled";
};
toddr_c: audio-controller@180 {
compatible = "amlogic,axg-toddr";
reg = <0x0 0x180 0x0 0x2c>;
#sound-dai-cells = <0>;
sound-name-prefix = "TODDR_C";
interrupts = <GIC_SPI 86 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_TODDR_C>;
resets = <&arb AXG_ARB_TODDR_C>;
amlogic,fifo-depth = <256>;
status = "disabled";
};
frddr_a: audio-controller@1c0 {
compatible = "amlogic,axg-frddr";
reg = <0x0 0x1c0 0x0 0x2c>;
#sound-dai-cells = <0>;
sound-name-prefix = "FRDDR_A";
interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_A>;
resets = <&arb AXG_ARB_FRDDR_A>;
amlogic,fifo-depth = <512>;
status = "disabled";
};
frddr_b: audio-controller@200 {
compatible = "amlogic,axg-frddr";
reg = <0x0 0x200 0x0 0x2c>;
#sound-dai-cells = <0>;
sound-name-prefix = "FRDDR_B";
interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_B>;
resets = <&arb AXG_ARB_FRDDR_B>;
amlogic,fifo-depth = <256>;
status = "disabled";
};
frddr_c: audio-controller@240 {
compatible = "amlogic,axg-frddr";
reg = <0x0 0x240 0x0 0x2c>;
#sound-dai-cells = <0>;
sound-name-prefix = "FRDDR_C";
interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_FRDDR_C>;
resets = <&arb AXG_ARB_FRDDR_C>;
amlogic,fifo-depth = <256>;
status = "disabled";
};
arb: reset-controller@280 {
compatible = "amlogic,meson-axg-audio-arb";
reg = <0x0 0x280 0x0 0x4>;
#reset-cells = <1>;
clocks = <&clkc_audio AUD_CLKID_DDR_ARB>;
};
tdmin_a: audio-controller@300 {
compatible = "amlogic,axg-tdmin";
reg = <0x0 0x300 0x0 0x40>;
sound-name-prefix = "TDMIN_A";
clocks = <&clkc_audio AUD_CLKID_TDMIN_A>,
<&clkc_audio AUD_CLKID_TDMIN_A_SCLK>,
<&clkc_audio AUD_CLKID_TDMIN_A_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>,
<&clkc_audio AUD_CLKID_TDMIN_A_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmin_b: audio-controller@340 {
compatible = "amlogic,axg-tdmin";
reg = <0x0 0x340 0x0 0x40>;
sound-name-prefix = "TDMIN_B";
clocks = <&clkc_audio AUD_CLKID_TDMIN_B>,
<&clkc_audio AUD_CLKID_TDMIN_B_SCLK>,
<&clkc_audio AUD_CLKID_TDMIN_B_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>,
<&clkc_audio AUD_CLKID_TDMIN_B_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmin_c: audio-controller@380 {
compatible = "amlogic,axg-tdmin";
reg = <0x0 0x380 0x0 0x40>;
sound-name-prefix = "TDMIN_C";
clocks = <&clkc_audio AUD_CLKID_TDMIN_C>,
<&clkc_audio AUD_CLKID_TDMIN_C_SCLK>,
<&clkc_audio AUD_CLKID_TDMIN_C_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>,
<&clkc_audio AUD_CLKID_TDMIN_C_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmin_lb: audio-controller@3c0 {
compatible = "amlogic,axg-tdmin";
reg = <0x0 0x3c0 0x0 0x40>;
sound-name-prefix = "TDMIN_LB";
clocks = <&clkc_audio AUD_CLKID_TDMIN_LB>,
<&clkc_audio AUD_CLKID_TDMIN_LB_SCLK>,
<&clkc_audio AUD_CLKID_TDMIN_LB_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>,
<&clkc_audio AUD_CLKID_TDMIN_LB_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
spdifin: audio-controller@400 {
compatible = "amlogic,axg-spdifin";
reg = <0x0 0x400 0x0 0x30>;
#sound-dai-cells = <0>;
sound-name-prefix = "SPDIFIN";
interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
<&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
clock-names = "pclk", "refclk";
status = "disabled";
};
spdifout: audio-controller@480 {
compatible = "amlogic,axg-spdifout";
reg = <0x0 0x480 0x0 0x50>;
#sound-dai-cells = <0>;
sound-name-prefix = "SPDIFOUT";
clocks = <&clkc_audio AUD_CLKID_SPDIFOUT>,
<&clkc_audio AUD_CLKID_SPDIFOUT_CLK>;
clock-names = "pclk", "mclk";
status = "disabled";
};
tdmout_a: audio-controller@500 {
compatible = "amlogic,axg-tdmout";
reg = <0x0 0x500 0x0 0x40>;
sound-name-prefix = "TDMOUT_A";
clocks = <&clkc_audio AUD_CLKID_TDMOUT_A>,
<&clkc_audio AUD_CLKID_TDMOUT_A_SCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_A_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_A_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmout_b: audio-controller@540 {
compatible = "amlogic,axg-tdmout";
reg = <0x0 0x540 0x0 0x40>;
sound-name-prefix = "TDMOUT_B";
clocks = <&clkc_audio AUD_CLKID_TDMOUT_B>,
<&clkc_audio AUD_CLKID_TDMOUT_B_SCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_B_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_B_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
tdmout_c: audio-controller@580 {
compatible = "amlogic,axg-tdmout";
reg = <0x0 0x580 0x0 0x40>;
sound-name-prefix = "TDMOUT_C";
clocks = <&clkc_audio AUD_CLKID_TDMOUT_C>,
<&clkc_audio AUD_CLKID_TDMOUT_C_SCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_C_SCLK_SEL>,
<&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>,
<&clkc_audio AUD_CLKID_TDMOUT_C_LRCLK>;
clock-names = "pclk", "sclk", "sclk_sel",
"lrclk", "lrclk_sel";
status = "disabled";
};
};
aobus: bus@ff800000 {
compatible = "simple-bus";
reg = <0x0 0xff800000 0x0 0x100000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
sysctrl_AO: sys-ctrl@0 {
compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon";
reg = <0x0 0x0 0x0 0x100>;
clkc_AO: clock-controller {
compatible = "amlogic,meson-axg-aoclkc";
#clock-cells = <1>;
#reset-cells = <1>;
clocks = <&xtal>, <&clkc CLKID_CLK81>;
clock-names = "xtal", "mpeg-clk";
};
};
pinctrl_aobus: pinctrl@14 {
compatible = "amlogic,meson-axg-aobus-pinctrl";
#address-cells = <2>;
#size-cells = <2>;
ranges;
gpio_ao: bank@14 {
reg = <0x0 0x00014 0x0 0x8>,
<0x0 0x0002c 0x0 0x4>,
<0x0 0x00024 0x0 0x8>;
reg-names = "mux", "pull", "gpio";
gpio-controller;
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_aobus 0 0 15>;
};
i2c_ao_sck_4_pins: i2c_ao_sck_4 {
mux {
groups = "i2c_ao_sck_4";
function = "i2c_ao";
bias-disable;
};
};
i2c_ao_sck_8_pins: i2c_ao_sck_8 {
mux {
groups = "i2c_ao_sck_8";
function = "i2c_ao";
bias-disable;
};
};
i2c_ao_sck_10_pins: i2c_ao_sck_10 {
mux {
groups = "i2c_ao_sck_10";
function = "i2c_ao";
bias-disable;
};
};
i2c_ao_sda_5_pins: i2c_ao_sda_5 {
mux {
groups = "i2c_ao_sda_5";
function = "i2c_ao";
bias-disable;
};
};
i2c_ao_sda_9_pins: i2c_ao_sda_9 {
mux {
groups = "i2c_ao_sda_9";
function = "i2c_ao";
bias-disable;
};
};
i2c_ao_sda_11_pins: i2c_ao_sda_11 {
mux {
groups = "i2c_ao_sda_11";
function = "i2c_ao";
bias-disable;
};
};
remote_input_ao_pins: remote_input_ao {
mux {
groups = "remote_input_ao";
function = "remote_input_ao";
bias-disable;
};
};
uart_ao_a_pins: uart_ao_a {
mux {
groups = "uart_ao_tx_a",
"uart_ao_rx_a";
function = "uart_ao_a";
bias-disable;
};
};
uart_ao_a_cts_rts_pins: uart_ao_a_cts_rts {
mux {
groups = "uart_ao_cts_a",
"uart_ao_rts_a";
function = "uart_ao_a";
bias-disable;
};
};
uart_ao_b_pins: uart_ao_b {
mux {
groups = "uart_ao_tx_b",
"uart_ao_rx_b";
function = "uart_ao_b";
bias-disable;
};
};
uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts {
mux {
groups = "uart_ao_cts_b",
"uart_ao_rts_b";
function = "uart_ao_b";
bias-disable;
};
};
};
sec_AO: ao-secure@140 {
compatible = "amlogic,meson-gx-ao-secure", "syscon";
reg = <0x0 0x140 0x0 0x140>;
amlogic,has-chip-id;
};
pwm_AO_cd: pwm@2000 {
compatible = "amlogic,meson-axg-ao-pwm";
reg = <0x0 0x02000 0x0 0x20>;
#pwm-cells = <3>;
status = "disabled";
};
uart_AO: serial@3000 {
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
reg = <0x0 0x3000 0x0 0x18>;
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>, <&clkc_AO CLKID_AO_UART1>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
uart_AO_B: serial@4000 {
compatible = "amlogic,meson-gx-uart", "amlogic,meson-ao-uart";
reg = <0x0 0x4000 0x0 0x18>;
interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>, <&clkc_AO CLKID_AO_UART2>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
status = "disabled";
};
i2c_AO: i2c@5000 {
compatible = "amlogic,meson-axg-i2c";
reg = <0x0 0x05000 0x0 0x20>;
interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_AO_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
pwm_AO_ab: pwm@7000 {
compatible = "amlogic,meson-axg-ao-pwm";
reg = <0x0 0x07000 0x0 0x20>;
#pwm-cells = <3>;
status = "disabled";
};
ir: ir@8000 {
compatible = "amlogic,meson-gxbb-ir";
reg = <0x0 0x8000 0x0 0x20>;
interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
};
saradc: adc@9000 {
compatible = "amlogic,meson-axg-saradc",
"amlogic,meson-saradc";
reg = <0x0 0x9000 0x0 0x38>;
#io-channel-cells = <1>;
interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
clocks = <&xtal>,
<&clkc_AO CLKID_AO_SAR_ADC>,
<&clkc_AO CLKID_AO_SAR_ADC_CLK>,
<&clkc_AO CLKID_AO_SAR_ADC_SEL>;
clock-names = "clkin", "core", "adc_clk", "adc_sel";
status = "disabled";
};
};
ge2d: ge2d@ff940000 {
compatible = "amlogic,axg-ge2d";
reg = <0x0 0xff940000 0x0 0x10000>;
interrupts = <GIC_SPI 150 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_VAPB>;
resets = <&reset RESET_GE2D>;
};
gic: interrupt-controller@ffc01000 {
compatible = "arm,gic-400";
reg = <0x0 0xffc01000 0 0x1000>,
<0x0 0xffc02000 0 0x2000>,
<0x0 0xffc04000 0 0x2000>,
<0x0 0xffc06000 0 0x2000>;
interrupt-controller;
interrupts = <GIC_PPI 9
(GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
#interrupt-cells = <3>;
#address-cells = <0>;
};
cbus: bus@ffd00000 {
compatible = "simple-bus";
reg = <0x0 0xffd00000 0x0 0x25000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
reset: reset-controller@1004 {
compatible = "amlogic,meson-axg-reset";
reg = <0x0 0x01004 0x0 0x9c>;
#reset-cells = <1>;
};
gpio_intc: interrupt-controller@f080 {
compatible = "amlogic,meson-axg-gpio-intc",
"amlogic,meson-gpio-intc";
reg = <0x0 0xf080 0x0 0x10>;
interrupt-controller;
#interrupt-cells = <2>;
amlogic,channel-interrupts = <64 65 66 67 68 69 70 71>;
};
watchdog@f0d0 {
compatible = "amlogic,meson-gxbb-wdt";
reg = <0x0 0xf0d0 0x0 0x10>;
clocks = <&xtal>;
};
pwm_ab: pwm@1b000 {
compatible = "amlogic,meson-axg-ee-pwm";
reg = <0x0 0x1b000 0x0 0x20>;
#pwm-cells = <3>;
status = "disabled";
};
pwm_cd: pwm@1a000 {
compatible = "amlogic,meson-axg-ee-pwm";
reg = <0x0 0x1a000 0x0 0x20>;
#pwm-cells = <3>;
status = "disabled";
};
spicc0: spi@13000 {
compatible = "amlogic,meson-axg-spicc";
reg = <0x0 0x13000 0x0 0x3c>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_SPICC0>;
clock-names = "core";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
spicc1: spi@15000 {
compatible = "amlogic,meson-axg-spicc";
reg = <0x0 0x15000 0x0 0x3c>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clkc CLKID_SPICC1>;
clock-names = "core";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
clk_msr: clock-measure@18000 {
compatible = "amlogic,meson-axg-clk-measure";
reg = <0x0 0x18000 0x0 0x10>;
};
i2c3: i2c@1c000 {
compatible = "amlogic,meson-axg-i2c";
reg = <0x0 0x1c000 0x0 0x20>;
interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c2: i2c@1d000 {
compatible = "amlogic,meson-axg-i2c";
reg = <0x0 0x1d000 0x0 0x20>;
interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c1: i2c@1e000 {
compatible = "amlogic,meson-axg-i2c";
reg = <0x0 0x1e000 0x0 0x20>;
interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
i2c0: i2c@1f000 {
compatible = "amlogic,meson-axg-i2c";
reg = <0x0 0x1f000 0x0 0x20>;
interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_I2C>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
uart_B: serial@23000 {
compatible = "amlogic,meson-gx-uart";
reg = <0x0 0x23000 0x0 0x18>;
interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
clocks = <&xtal>, <&clkc CLKID_UART1>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
};
uart_A: serial@24000 {
compatible = "amlogic,meson-gx-uart";
reg = <0x0 0x24000 0x0 0x18>;
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
status = "disabled";
clocks = <&xtal>, <&clkc CLKID_UART0>, <&xtal>;
clock-names = "xtal", "pclk", "baud";
fifo-size = <128>;
};
};
apb: bus@ffe00000 {
compatible = "simple-bus";
reg = <0x0 0xffe00000 0x0 0x200000>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
sd_emmc_b: mmc@5000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0x5000 0x0 0x800>;
interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clocks = <&clkc CLKID_SD_EMMC_B>,
<&clkc CLKID_SD_EMMC_B_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
resets = <&reset RESET_SD_EMMC_B>;
};
sd_emmc_c: mmc@7000 {
compatible = "amlogic,meson-axg-mmc";
reg = <0x0 0x7000 0x0 0x800>;
interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
clocks = <&clkc CLKID_SD_EMMC_C>,
<&clkc CLKID_SD_EMMC_C_CLK0>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "clkin0", "clkin1";
resets = <&reset RESET_SD_EMMC_C>;
};
nfc: nand-controller@7800 {
compatible = "amlogic,meson-axg-nfc";
reg = <0x0 0x7800 0x0 0x100>,
<0x0 0x7000 0x0 0x800>;
reg-names = "nfc", "emmc";
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>;
clocks = <&clkc CLKID_SD_EMMC_C>,
<&clkc CLKID_FCLK_DIV2>;
clock-names = "core", "device";
};
usb2_phy1: phy@9020 {
compatible = "amlogic,meson-gxl-usb2-phy";
#phy-cells = <0>;
reg = <0x0 0x9020 0x0 0x20>;
clocks = <&clkc CLKID_USB>;
clock-names = "phy";
resets = <&reset RESET_USB_OTG>;
reset-names = "phy";
};
};
sram: sram@fffc0000 {
compatible = "mmio-sram";
reg = <0x0 0xfffc0000 0x0 0x20000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x0 0xfffc0000 0x20000>;
cpu_scp_lpri: scp-sram@13000 {
compatible = "amlogic,meson-axg-scp-shmem";
reg = <0x13000 0x400>;
};
cpu_scp_hpri: scp-sram@13400 {
compatible = "amlogic,meson-axg-scp-shmem";
reg = <0x13400 0x400>;
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10
(GIC_CPU_MASK_RAW(0xff) | IRQ_TYPE_LEVEL_LOW)>;
};
xtal: xtal-clk {
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "xtal";
#clock-cells = <0>;
};
};