Documentation/devicetree/bindings/serial/nxp,sc16is7xx.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/serial/nxp,sc16is7xx.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: NXP SC16IS7xx Advanced Universal Asynchronous Receiver-Transmitter (UART)

maintainers:
  - Hugo Villeneuve <hvilleneuve@dimonoff.com>

properties:
  compatible:
    enum:
      - nxp,sc16is740
      - nxp,sc16is741
      - nxp,sc16is750
      - nxp,sc16is752
      - nxp,sc16is760
      - nxp,sc16is762

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  clocks:
    maxItems: 1

  clock-frequency:
    description:
      When there is no clock provider visible to the platform, this
      is the source crystal or external clock frequency for the IC in Hz.
    minimum: 1
    maximum: 80000000

  gpio-controller: true

  "#gpio-cells":
    const: 2

  gpio-line-names:
    minItems: 1
    maxItems: 8

  irda-mode-ports:
    description: |
      An array that lists the indices of the port that should operate in IrDA
      mode:
      0: port A
      1: port B
    $ref: /schemas/types.yaml#/definitions/uint32-array
    minItems: 1
    maxItems: 2
    items:
      minimum: 0
      maximum: 1

  nxp,modem-control-line-ports:
    description: |
      An array that lists the indices of the port that should have shared GPIO
      lines configured as modem control lines:
      0: port A
      1: port B
    $ref: /schemas/types.yaml#/definitions/uint32-array
    minItems: 1
    maxItems: 2
    items:
      minimum: 0
      maximum: 1

required:
  - compatible
  - reg
  - interrupts

allOf:
  - $ref: /schemas/spi/spi-peripheral-props.yaml#
  - $ref: /schemas/serial/serial.yaml#
  - $ref: /schemas/serial/rs485.yaml#

oneOf:
  - required:
      - clocks
  - required:
      - clock-frequency

unevaluatedProperties: false

examples:
  - |
    #include <dt-bindings/interrupt-controller/irq.h>
    i2c {
        #address-cells = <1>;
        #size-cells = <0>;

        serial@51 {
            compatible = "nxp,sc16is750";
            reg = <0x51>;
            clocks = <&clk20m>;
            interrupt-parent = <&gpio3>;
            interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
            gpio-controller;
            #gpio-cells = <2>;
        };

        serial@53 {
            compatible = "nxp,sc16is752";
            reg = <0x53>;
            clocks = <&clk20m>;
            interrupt-parent = <&gpio3>;
            interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
            nxp,modem-control-line-ports = <1>; /* Port 1 as modem control lines */
            gpio-controller; /* Port 0 as GPIOs */
            #gpio-cells = <2>;
        };

        serial@54 {
            compatible = "nxp,sc16is752";
            reg = <0x54>;
            clocks = <&clk20m>;
            interrupt-parent = <&gpio3>;
            interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
            nxp,modem-control-line-ports = <0 1>; /* Ports 0 and 1 as modem control lines */
        };
    };