blob: 7032c7e15039004f6a0e7576c27592e067ec8fc5 [file] [log] [blame]
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/mediatek,mdp3-rdma.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: MediaTek Read Direct Memory Access
maintainers:
- Matthias Brugger <matthias.bgg@gmail.com>
- Moudy Ho <moudy.ho@mediatek.com>
description: |
MediaTek Read Direct Memory Access(RDMA) component used to do read DMA.
It contains one line buffer to store the sufficient pixel data, and
must be siblings to the central MMSYS_CONFIG node.
For a description of the MMSYS_CONFIG binding, see
Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml
for details.
properties:
compatible:
items:
- const: mediatek,mt8183-mdp3-rdma
reg:
maxItems: 1
mediatek,gce-client-reg:
$ref: /schemas/types.yaml#/definitions/phandle-array
items:
items:
- description: phandle of GCE
- description: GCE subsys id
- description: register offset
- description: register size
description: The register of client driver can be configured by gce with
4 arguments defined in this property. Each GCE subsys id is mapping to
a client defined in the header include/dt-bindings/gce/<chip>-gce.h.
mediatek,gce-events:
description:
The event id which is mapping to the specific hardware event signal
to gce. The event id is defined in the gce header
include/dt-bindings/gce/<chip>-gce.h of each chips.
$ref: /schemas/types.yaml#/definitions/uint32-array
power-domains:
maxItems: 1
clocks:
items:
- description: RDMA clock
- description: RSZ clock
iommus:
maxItems: 1
mboxes:
items:
- description: used for 1st data pipe from RDMA
- description: used for 2nd data pipe from RDMA
required:
- compatible
- reg
- mediatek,gce-client-reg
- mediatek,gce-events
- power-domains
- clocks
- iommus
- mboxes
additionalProperties: false
examples:
- |
#include <dt-bindings/clock/mt8183-clk.h>
#include <dt-bindings/gce/mt8183-gce.h>
#include <dt-bindings/power/mt8183-power.h>
#include <dt-bindings/memory/mt8183-larb-port.h>
mdp3_rdma0: mdp3-rdma0@14001000 {
compatible = "mediatek,mt8183-mdp3-rdma";
reg = <0x14001000 0x1000>;
mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x1000 0x1000>;
mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>,
<CMDQ_EVENT_MDP_RDMA0_EOF>;
power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
clocks = <&mmsys CLK_MM_MDP_RDMA0>,
<&mmsys CLK_MM_MDP_RSZ1>;
iommus = <&iommu>;
mboxes = <&gce 20 CMDQ_THR_PRIO_LOWEST>,
<&gce 21 CMDQ_THR_PRIO_LOWEST>;
};