|  | #include "wl1251_cmd.h" | 
|  |  | 
|  | #include <linux/module.h> | 
|  | #include <linux/slab.h> | 
|  | #include <linux/crc7.h> | 
|  |  | 
|  | #include "wl1251.h" | 
|  | #include "wl1251_reg.h" | 
|  | #include "wl1251_io.h" | 
|  | #include "wl1251_ps.h" | 
|  | #include "wl1251_acx.h" | 
|  |  | 
|  | /** | 
|  | * send command to firmware | 
|  | * | 
|  | * @wl: wl struct | 
|  | * @id: command id | 
|  | * @buf: buffer containing the command, must work with dma | 
|  | * @len: length of the buffer | 
|  | */ | 
|  | int wl1251_cmd_send(struct wl1251 *wl, u16 id, void *buf, size_t len) | 
|  | { | 
|  | struct wl1251_cmd_header *cmd; | 
|  | unsigned long timeout; | 
|  | u32 intr; | 
|  | int ret = 0; | 
|  |  | 
|  | cmd = buf; | 
|  | cmd->id = id; | 
|  | cmd->status = 0; | 
|  |  | 
|  | WARN_ON(len % 4 != 0); | 
|  |  | 
|  | wl1251_mem_write(wl, wl->cmd_box_addr, buf, len); | 
|  |  | 
|  | wl1251_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD); | 
|  |  | 
|  | timeout = jiffies + msecs_to_jiffies(WL1251_COMMAND_TIMEOUT); | 
|  |  | 
|  | intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); | 
|  | while (!(intr & WL1251_ACX_INTR_CMD_COMPLETE)) { | 
|  | if (time_after(jiffies, timeout)) { | 
|  | wl1251_error("command complete timeout"); | 
|  | ret = -ETIMEDOUT; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | msleep(1); | 
|  |  | 
|  | intr = wl1251_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); | 
|  | } | 
|  |  | 
|  | wl1251_reg_write32(wl, ACX_REG_INTERRUPT_ACK, | 
|  | WL1251_ACX_INTR_CMD_COMPLETE); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * send test command to firmware | 
|  | * | 
|  | * @wl: wl struct | 
|  | * @buf: buffer containing the command, with all headers, must work with dma | 
|  | * @len: length of the buffer | 
|  | * @answer: is answer needed | 
|  | */ | 
|  | int wl1251_cmd_test(struct wl1251 *wl, void *buf, size_t buf_len, u8 answer) | 
|  | { | 
|  | int ret; | 
|  |  | 
|  | wl1251_debug(DEBUG_CMD, "cmd test"); | 
|  |  | 
|  | ret = wl1251_cmd_send(wl, CMD_TEST, buf, buf_len); | 
|  |  | 
|  | if (ret < 0) { | 
|  | wl1251_warning("TEST command failed"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | if (answer) { | 
|  | struct wl1251_command *cmd_answer; | 
|  |  | 
|  | /* | 
|  | * The test command got in, we can read the answer. | 
|  | * The answer would be a wl1251_command, where the | 
|  | * parameter array contains the actual answer. | 
|  | */ | 
|  | wl1251_mem_read(wl, wl->cmd_box_addr, buf, buf_len); | 
|  |  | 
|  | cmd_answer = buf; | 
|  |  | 
|  | if (cmd_answer->header.status != CMD_STATUS_SUCCESS) | 
|  | wl1251_error("TEST command answer error: %d", | 
|  | cmd_answer->header.status); | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * read acx from firmware | 
|  | * | 
|  | * @wl: wl struct | 
|  | * @id: acx id | 
|  | * @buf: buffer for the response, including all headers, must work with dma | 
|  | * @len: lenght of buf | 
|  | */ | 
|  | int wl1251_cmd_interrogate(struct wl1251 *wl, u16 id, void *buf, size_t len) | 
|  | { | 
|  | struct acx_header *acx = buf; | 
|  | int ret; | 
|  |  | 
|  | wl1251_debug(DEBUG_CMD, "cmd interrogate"); | 
|  |  | 
|  | acx->id = id; | 
|  |  | 
|  | /* payload length, does not include any headers */ | 
|  | acx->len = len - sizeof(*acx); | 
|  |  | 
|  | ret = wl1251_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx)); | 
|  | if (ret < 0) { | 
|  | wl1251_error("INTERROGATE command failed"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* the interrogate command got in, we can read the answer */ | 
|  | wl1251_mem_read(wl, wl->cmd_box_addr, buf, len); | 
|  |  | 
|  | acx = buf; | 
|  | if (acx->cmd.status != CMD_STATUS_SUCCESS) | 
|  | wl1251_error("INTERROGATE command error: %d", | 
|  | acx->cmd.status); | 
|  |  | 
|  | out: | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | /** | 
|  | * write acx value to firmware | 
|  | * | 
|  | * @wl: wl struct | 
|  | * @id: acx id | 
|  | * @buf: buffer containing acx, including all headers, must work with dma | 
|  | * @len: length of buf | 
|  | */ | 
|  | int wl1251_cmd_configure(struct wl1251 *wl, u16 id, void *buf, size_t len) | 
|  | { | 
|  | struct acx_header *acx = buf; | 
|  | int ret; | 
|  |  | 
|  | wl1251_debug(DEBUG_CMD, "cmd configure"); | 
|  |  | 
|  | acx->id = id; | 
|  |  | 
|  | /* payload length, does not include any headers */ | 
|  | acx->len = len - sizeof(*acx); | 
|  |  | 
|  | ret = wl1251_cmd_send(wl, CMD_CONFIGURE, acx, len); | 
|  | if (ret < 0) { | 
|  | wl1251_warning("CONFIGURE command NOK"); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int wl1251_cmd_vbm(struct wl1251 *wl, u8 identity, | 
|  | void *bitmap, u16 bitmap_len, u8 bitmap_control) | 
|  | { | 
|  | struct wl1251_cmd_vbm_update *vbm; | 
|  | int ret; | 
|  |  | 
|  | wl1251_debug(DEBUG_CMD, "cmd vbm"); | 
|  |  | 
|  | vbm = kzalloc(sizeof(*vbm), GFP_KERNEL); | 
|  | if (!vbm) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* Count and period will be filled by the target */ | 
|  | vbm->tim.bitmap_ctrl = bitmap_control; | 
|  | if (bitmap_len > PARTIAL_VBM_MAX) { | 
|  | wl1251_warning("cmd vbm len is %d B, truncating to %d", | 
|  | bitmap_len, PARTIAL_VBM_MAX); | 
|  | bitmap_len = PARTIAL_VBM_MAX; | 
|  | } | 
|  | memcpy(vbm->tim.pvb_field, bitmap, bitmap_len); | 
|  | vbm->tim.identity = identity; | 
|  | vbm->tim.length = bitmap_len + 3; | 
|  |  | 
|  | vbm->len = cpu_to_le16(bitmap_len + 5); | 
|  |  | 
|  | ret = wl1251_cmd_send(wl, CMD_VBM, vbm, sizeof(*vbm)); | 
|  | if (ret < 0) { | 
|  | wl1251_error("VBM command failed"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(vbm); | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | int wl1251_cmd_data_path(struct wl1251 *wl, u8 channel, bool enable) | 
|  | { | 
|  | struct cmd_enabledisable_path *cmd; | 
|  | int ret; | 
|  | u16 cmd_rx, cmd_tx; | 
|  |  | 
|  | wl1251_debug(DEBUG_CMD, "cmd data path"); | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | cmd->channel = channel; | 
|  |  | 
|  | if (enable) { | 
|  | cmd_rx = CMD_ENABLE_RX; | 
|  | cmd_tx = CMD_ENABLE_TX; | 
|  | } else { | 
|  | cmd_rx = CMD_DISABLE_RX; | 
|  | cmd_tx = CMD_DISABLE_TX; | 
|  | } | 
|  |  | 
|  | ret = wl1251_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd)); | 
|  | if (ret < 0) { | 
|  | wl1251_error("rx %s cmd for channel %d failed", | 
|  | enable ? "start" : "stop", channel); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | wl1251_debug(DEBUG_BOOT, "rx %s cmd channel %d", | 
|  | enable ? "start" : "stop", channel); | 
|  |  | 
|  | ret = wl1251_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd)); | 
|  | if (ret < 0) { | 
|  | wl1251_error("tx %s cmd for channel %d failed", | 
|  | enable ? "start" : "stop", channel); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | wl1251_debug(DEBUG_BOOT, "tx %s cmd channel %d", | 
|  | enable ? "start" : "stop", channel); | 
|  |  | 
|  | out: | 
|  | kfree(cmd); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel, | 
|  | u16 beacon_interval, u8 dtim_interval) | 
|  | { | 
|  | struct cmd_join *join; | 
|  | int ret, i; | 
|  | u8 *bssid; | 
|  |  | 
|  | join = kzalloc(sizeof(*join), GFP_KERNEL); | 
|  | if (!join) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | wl1251_debug(DEBUG_CMD, "cmd join%s ch %d %d/%d", | 
|  | bss_type == BSS_TYPE_IBSS ? " ibss" : "", | 
|  | channel, beacon_interval, dtim_interval); | 
|  |  | 
|  | /* Reverse order BSSID */ | 
|  | bssid = (u8 *) &join->bssid_lsb; | 
|  | for (i = 0; i < ETH_ALEN; i++) | 
|  | bssid[i] = wl->bssid[ETH_ALEN - i - 1]; | 
|  |  | 
|  | join->rx_config_options = wl->rx_config; | 
|  | join->rx_filter_options = wl->rx_filter; | 
|  |  | 
|  | /* | 
|  | * FIXME: disable temporarily all filters because after commit | 
|  | * 9cef8737 "mac80211: fix managed mode BSSID handling" broke | 
|  | * association. The filter logic needs to be implemented properly | 
|  | * and once that is done, this hack can be removed. | 
|  | */ | 
|  | join->rx_config_options = 0; | 
|  | join->rx_filter_options = WL1251_DEFAULT_RX_FILTER; | 
|  |  | 
|  | join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS | | 
|  | RATE_MASK_5_5MBPS | RATE_MASK_11MBPS; | 
|  |  | 
|  | join->beacon_interval = beacon_interval; | 
|  | join->dtim_interval = dtim_interval; | 
|  | join->bss_type = bss_type; | 
|  | join->channel = channel; | 
|  | join->ctrl = JOIN_CMD_CTRL_TX_FLUSH; | 
|  |  | 
|  | ret = wl1251_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join)); | 
|  | if (ret < 0) { | 
|  | wl1251_error("failed to initiate cmd join"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(join); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1251_cmd_ps_mode(struct wl1251 *wl, u8 ps_mode) | 
|  | { | 
|  | struct wl1251_cmd_ps_params *ps_params = NULL; | 
|  | int ret = 0; | 
|  |  | 
|  | wl1251_debug(DEBUG_CMD, "cmd set ps mode"); | 
|  |  | 
|  | ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL); | 
|  | if (!ps_params) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | ps_params->ps_mode = ps_mode; | 
|  | ps_params->send_null_data = 1; | 
|  | ps_params->retries = 5; | 
|  | ps_params->hang_over_period = 128; | 
|  | ps_params->null_data_rate = 1; /* 1 Mbps */ | 
|  |  | 
|  | ret = wl1251_cmd_send(wl, CMD_SET_PS_MODE, ps_params, | 
|  | sizeof(*ps_params)); | 
|  | if (ret < 0) { | 
|  | wl1251_error("cmd set_ps_mode failed"); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(ps_params); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1251_cmd_read_memory(struct wl1251 *wl, u32 addr, void *answer, | 
|  | size_t len) | 
|  | { | 
|  | struct cmd_read_write_memory *cmd; | 
|  | int ret = 0; | 
|  |  | 
|  | wl1251_debug(DEBUG_CMD, "cmd read memory"); | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | WARN_ON(len > MAX_READ_SIZE); | 
|  | len = min_t(size_t, len, MAX_READ_SIZE); | 
|  |  | 
|  | cmd->addr = addr; | 
|  | cmd->size = len; | 
|  |  | 
|  | ret = wl1251_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd)); | 
|  | if (ret < 0) { | 
|  | wl1251_error("read memory command failed: %d", ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | /* the read command got in, we can now read the answer */ | 
|  | wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd)); | 
|  |  | 
|  | if (cmd->header.status != CMD_STATUS_SUCCESS) | 
|  | wl1251_error("error in read command result: %d", | 
|  | cmd->header.status); | 
|  |  | 
|  | memcpy(answer, cmd->value, len); | 
|  |  | 
|  | out: | 
|  | kfree(cmd); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1251_cmd_template_set(struct wl1251 *wl, u16 cmd_id, | 
|  | void *buf, size_t buf_len) | 
|  | { | 
|  | struct wl1251_cmd_packet_template *cmd; | 
|  | size_t cmd_len; | 
|  | int ret = 0; | 
|  |  | 
|  | wl1251_debug(DEBUG_CMD, "cmd template %d", cmd_id); | 
|  |  | 
|  | WARN_ON(buf_len > WL1251_MAX_TEMPLATE_SIZE); | 
|  | buf_len = min_t(size_t, buf_len, WL1251_MAX_TEMPLATE_SIZE); | 
|  | cmd_len = ALIGN(sizeof(*cmd) + buf_len, 4); | 
|  |  | 
|  | cmd = kzalloc(cmd_len, GFP_KERNEL); | 
|  | if (!cmd) { | 
|  | ret = -ENOMEM; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | cmd->size = cpu_to_le16(buf_len); | 
|  |  | 
|  | if (buf) | 
|  | memcpy(cmd->data, buf, buf_len); | 
|  |  | 
|  | ret = wl1251_cmd_send(wl, cmd_id, cmd, cmd_len); | 
|  | if (ret < 0) { | 
|  | wl1251_warning("cmd set_template failed: %d", ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(cmd); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1251_cmd_scan(struct wl1251 *wl, u8 *ssid, size_t ssid_len, | 
|  | struct ieee80211_channel *channels[], | 
|  | unsigned int n_channels, unsigned int n_probes) | 
|  | { | 
|  | struct wl1251_cmd_scan *cmd; | 
|  | int i, ret = 0; | 
|  |  | 
|  | wl1251_debug(DEBUG_CMD, "cmd scan"); | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) | 
|  | return -ENOMEM; | 
|  |  | 
|  | cmd->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD); | 
|  | cmd->params.rx_filter_options = cpu_to_le32(CFG_RX_PRSP_EN | | 
|  | CFG_RX_MGMT_EN | | 
|  | CFG_RX_BCN_EN); | 
|  | cmd->params.scan_options = 0; | 
|  | cmd->params.num_channels = n_channels; | 
|  | cmd->params.num_probe_requests = n_probes; | 
|  | cmd->params.tx_rate = cpu_to_le16(1 << 1); /* 2 Mbps */ | 
|  | cmd->params.tid_trigger = 0; | 
|  |  | 
|  | for (i = 0; i < n_channels; i++) { | 
|  | cmd->channels[i].min_duration = | 
|  | cpu_to_le32(WL1251_SCAN_MIN_DURATION); | 
|  | cmd->channels[i].max_duration = | 
|  | cpu_to_le32(WL1251_SCAN_MAX_DURATION); | 
|  | memset(&cmd->channels[i].bssid_lsb, 0xff, 4); | 
|  | memset(&cmd->channels[i].bssid_msb, 0xff, 2); | 
|  | cmd->channels[i].early_termination = 0; | 
|  | cmd->channels[i].tx_power_att = 0; | 
|  | cmd->channels[i].channel = channels[i]->hw_value; | 
|  | } | 
|  |  | 
|  | cmd->params.ssid_len = ssid_len; | 
|  | if (ssid) | 
|  | memcpy(cmd->params.ssid, ssid, ssid_len); | 
|  |  | 
|  | ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd)); | 
|  | if (ret < 0) { | 
|  | wl1251_error("cmd scan failed: %d", ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | wl1251_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd)); | 
|  |  | 
|  | if (cmd->header.status != CMD_STATUS_SUCCESS) { | 
|  | wl1251_error("cmd scan status wasn't success: %d", | 
|  | cmd->header.status); | 
|  | ret = -EIO; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(cmd); | 
|  | return ret; | 
|  | } | 
|  |  | 
|  | int wl1251_cmd_trigger_scan_to(struct wl1251 *wl, u32 timeout) | 
|  | { | 
|  | struct wl1251_cmd_trigger_scan_to *cmd; | 
|  | int ret; | 
|  |  | 
|  | wl1251_debug(DEBUG_CMD, "cmd trigger scan to"); | 
|  |  | 
|  | cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); | 
|  | if (!cmd) | 
|  | return -ENOMEM; | 
|  |  | 
|  | cmd->timeout = timeout; | 
|  |  | 
|  | ret = wl1251_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd)); | 
|  | if (ret < 0) { | 
|  | wl1251_error("cmd trigger scan to failed: %d", ret); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(cmd); | 
|  | return ret; | 
|  | } |