| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * PCIe driver for Renesas R-Car SoCs | |
| * Copyright (C) 2014 Renesas Electronics Europe Ltd | |
| * | |
| * Based on: | |
| * arch/sh/drivers/pci/pcie-sh7786.c | |
| * arch/sh/drivers/pci/ops-sh7786.c | |
| * Copyright (C) 2009 - 2011 Paul Mundt | |
| * | |
| * Author: Phil Edworthy <phil.edworthy@renesas.com> | |
| */ | |
| #include <linux/bitops.h> | |
| #include <linux/clk.h> | |
| #include <linux/delay.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/irq.h> | |
| #include <linux/irqdomain.h> | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/msi.h> | |
| #include <linux/of_address.h> | |
| #include <linux/of_irq.h> | |
| #include <linux/of_pci.h> | |
| #include <linux/of_platform.h> | |
| #include <linux/pci.h> | |
| #include <linux/phy/phy.h> | |
| #include <linux/platform_device.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/slab.h> | |
| #include "../pci.h" | |
| #define PCIECAR 0x000010 | |
| #define PCIECCTLR 0x000018 | |
| #define CONFIG_SEND_ENABLE BIT(31) | |
| #define TYPE0 (0 << 8) | |
| #define TYPE1 BIT(8) | |
| #define PCIECDR 0x000020 | |
| #define PCIEMSR 0x000028 | |
| #define PCIEINTXR 0x000400 | |
| #define PCIEPHYSR 0x0007f0 | |
| #define PHYRDY BIT(0) | |
| #define PCIEMSITXR 0x000840 | |
| /* Transfer control */ | |
| #define PCIETCTLR 0x02000 | |
| #define CFINIT 1 | |
| #define PCIETSTR 0x02004 | |
| #define DATA_LINK_ACTIVE 1 | |
| #define PCIEERRFR 0x02020 | |
| #define UNSUPPORTED_REQUEST BIT(4) | |
| #define PCIEMSIFR 0x02044 | |
| #define PCIEMSIALR 0x02048 | |
| #define MSIFE 1 | |
| #define PCIEMSIAUR 0x0204c | |
| #define PCIEMSIIER 0x02050 | |
| /* root port address */ | |
| #define PCIEPRAR(x) (0x02080 + ((x) * 0x4)) | |
| /* local address reg & mask */ | |
| #define PCIELAR(x) (0x02200 + ((x) * 0x20)) | |
| #define PCIELAMR(x) (0x02208 + ((x) * 0x20)) | |
| #define LAM_PREFETCH BIT(3) | |
| #define LAM_64BIT BIT(2) | |
| #define LAR_ENABLE BIT(1) | |
| /* PCIe address reg & mask */ | |
| #define PCIEPALR(x) (0x03400 + ((x) * 0x20)) | |
| #define PCIEPAUR(x) (0x03404 + ((x) * 0x20)) | |
| #define PCIEPAMR(x) (0x03408 + ((x) * 0x20)) | |
| #define PCIEPTCTLR(x) (0x0340c + ((x) * 0x20)) | |
| #define PAR_ENABLE BIT(31) | |
| #define IO_SPACE BIT(8) | |
| /* Configuration */ | |
| #define PCICONF(x) (0x010000 + ((x) * 0x4)) | |
| #define PMCAP(x) (0x010040 + ((x) * 0x4)) | |
| #define EXPCAP(x) (0x010070 + ((x) * 0x4)) | |
| #define VCCAP(x) (0x010100 + ((x) * 0x4)) | |
| /* link layer */ | |
| #define IDSETR1 0x011004 | |
| #define TLCTLR 0x011048 | |
| #define MACSR 0x011054 | |
| #define SPCHGFIN BIT(4) | |
| #define SPCHGFAIL BIT(6) | |
| #define SPCHGSUC BIT(7) | |
| #define LINK_SPEED (0xf << 16) | |
| #define LINK_SPEED_2_5GTS (1 << 16) | |
| #define LINK_SPEED_5_0GTS (2 << 16) | |
| #define MACCTLR 0x011058 | |
| #define SPEED_CHANGE BIT(24) | |
| #define SCRAMBLE_DISABLE BIT(27) | |
| #define MACS2R 0x011078 | |
| #define MACCGSPSETR 0x011084 | |
| #define SPCNGRSN BIT(31) | |
| /* R-Car H1 PHY */ | |
| #define H1_PCIEPHYADRR 0x04000c | |
| #define WRITE_CMD BIT(16) | |
| #define PHY_ACK BIT(24) | |
| #define RATE_POS 12 | |
| #define LANE_POS 8 | |
| #define ADR_POS 0 | |
| #define H1_PCIEPHYDOUTR 0x040014 | |
| /* R-Car Gen2 PHY */ | |
| #define GEN2_PCIEPHYADDR 0x780 | |
| #define GEN2_PCIEPHYDATA 0x784 | |
| #define GEN2_PCIEPHYCTRL 0x78c | |
| #define INT_PCI_MSI_NR 32 | |
| #define RCONF(x) (PCICONF(0) + (x)) | |
| #define RPMCAP(x) (PMCAP(0) + (x)) | |
| #define REXPCAP(x) (EXPCAP(0) + (x)) | |
| #define RVCCAP(x) (VCCAP(0) + (x)) | |
| #define PCIE_CONF_BUS(b) (((b) & 0xff) << 24) | |
| #define PCIE_CONF_DEV(d) (((d) & 0x1f) << 19) | |
| #define PCIE_CONF_FUNC(f) (((f) & 0x7) << 16) | |
| #define RCAR_PCI_MAX_RESOURCES 4 | |
| #define MAX_NR_INBOUND_MAPS 6 | |
| struct rcar_msi { | |
| DECLARE_BITMAP(used, INT_PCI_MSI_NR); | |
| struct irq_domain *domain; | |
| struct msi_controller chip; | |
| unsigned long pages; | |
| struct mutex lock; | |
| int irq1; | |
| int irq2; | |
| }; | |
| static inline struct rcar_msi *to_rcar_msi(struct msi_controller *chip) | |
| { | |
| return container_of(chip, struct rcar_msi, chip); | |
| } | |
| /* Structure representing the PCIe interface */ | |
| struct rcar_pcie { | |
| struct device *dev; | |
| struct phy *phy; | |
| void __iomem *base; | |
| struct list_head resources; | |
| int root_bus_nr; | |
| struct clk *bus_clk; | |
| struct rcar_msi msi; | |
| }; | |
| static void rcar_pci_write_reg(struct rcar_pcie *pcie, unsigned long val, | |
| unsigned long reg) | |
| { | |
| writel(val, pcie->base + reg); | |
| } | |
| static unsigned long rcar_pci_read_reg(struct rcar_pcie *pcie, | |
| unsigned long reg) | |
| { | |
| return readl(pcie->base + reg); | |
| } | |
| enum { | |
| RCAR_PCI_ACCESS_READ, | |
| RCAR_PCI_ACCESS_WRITE, | |
| }; | |
| static void rcar_rmw32(struct rcar_pcie *pcie, int where, u32 mask, u32 data) | |
| { | |
| int shift = 8 * (where & 3); | |
| u32 val = rcar_pci_read_reg(pcie, where & ~3); | |
| val &= ~(mask << shift); | |
| val |= data << shift; | |
| rcar_pci_write_reg(pcie, val, where & ~3); | |
| } | |
| static u32 rcar_read_conf(struct rcar_pcie *pcie, int where) | |
| { | |
| int shift = 8 * (where & 3); | |
| u32 val = rcar_pci_read_reg(pcie, where & ~3); | |
| return val >> shift; | |
| } | |
| /* Serialization is provided by 'pci_lock' in drivers/pci/access.c */ | |
| static int rcar_pcie_config_access(struct rcar_pcie *pcie, | |
| unsigned char access_type, struct pci_bus *bus, | |
| unsigned int devfn, int where, u32 *data) | |
| { | |
| int dev, func, reg, index; | |
| dev = PCI_SLOT(devfn); | |
| func = PCI_FUNC(devfn); | |
| reg = where & ~3; | |
| index = reg / 4; | |
| /* | |
| * While each channel has its own memory-mapped extended config | |
| * space, it's generally only accessible when in endpoint mode. | |
| * When in root complex mode, the controller is unable to target | |
| * itself with either type 0 or type 1 accesses, and indeed, any | |
| * controller initiated target transfer to its own config space | |
| * result in a completer abort. | |
| * | |
| * Each channel effectively only supports a single device, but as | |
| * the same channel <-> device access works for any PCI_SLOT() | |
| * value, we cheat a bit here and bind the controller's config | |
| * space to devfn 0 in order to enable self-enumeration. In this | |
| * case the regular ECAR/ECDR path is sidelined and the mangled | |
| * config access itself is initiated as an internal bus transaction. | |
| */ | |
| if (pci_is_root_bus(bus)) { | |
| if (dev != 0) | |
| return PCIBIOS_DEVICE_NOT_FOUND; | |
| if (access_type == RCAR_PCI_ACCESS_READ) { | |
| *data = rcar_pci_read_reg(pcie, PCICONF(index)); | |
| } else { | |
| /* Keep an eye out for changes to the root bus number */ | |
| if (pci_is_root_bus(bus) && (reg == PCI_PRIMARY_BUS)) | |
| pcie->root_bus_nr = *data & 0xff; | |
| rcar_pci_write_reg(pcie, *data, PCICONF(index)); | |
| } | |
| return PCIBIOS_SUCCESSFUL; | |
| } | |
| if (pcie->root_bus_nr < 0) | |
| return PCIBIOS_DEVICE_NOT_FOUND; | |
| /* Clear errors */ | |
| rcar_pci_write_reg(pcie, rcar_pci_read_reg(pcie, PCIEERRFR), PCIEERRFR); | |
| /* Set the PIO address */ | |
| rcar_pci_write_reg(pcie, PCIE_CONF_BUS(bus->number) | | |
| PCIE_CONF_DEV(dev) | PCIE_CONF_FUNC(func) | reg, PCIECAR); | |
| /* Enable the configuration access */ | |
| if (bus->parent->number == pcie->root_bus_nr) | |
| rcar_pci_write_reg(pcie, CONFIG_SEND_ENABLE | TYPE0, PCIECCTLR); | |
| else | |
| rcar_pci_write_reg(pcie, CONFIG_SEND_ENABLE | TYPE1, PCIECCTLR); | |
| /* Check for errors */ | |
| if (rcar_pci_read_reg(pcie, PCIEERRFR) & UNSUPPORTED_REQUEST) | |
| return PCIBIOS_DEVICE_NOT_FOUND; | |
| /* Check for master and target aborts */ | |
| if (rcar_read_conf(pcie, RCONF(PCI_STATUS)) & | |
| (PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT)) | |
| return PCIBIOS_DEVICE_NOT_FOUND; | |
| if (access_type == RCAR_PCI_ACCESS_READ) | |
| *data = rcar_pci_read_reg(pcie, PCIECDR); | |
| else | |
| rcar_pci_write_reg(pcie, *data, PCIECDR); | |
| /* Disable the configuration access */ | |
| rcar_pci_write_reg(pcie, 0, PCIECCTLR); | |
| return PCIBIOS_SUCCESSFUL; | |
| } | |
| static int rcar_pcie_read_conf(struct pci_bus *bus, unsigned int devfn, | |
| int where, int size, u32 *val) | |
| { | |
| struct rcar_pcie *pcie = bus->sysdata; | |
| int ret; | |
| ret = rcar_pcie_config_access(pcie, RCAR_PCI_ACCESS_READ, | |
| bus, devfn, where, val); | |
| if (ret != PCIBIOS_SUCCESSFUL) { | |
| *val = 0xffffffff; | |
| return ret; | |
| } | |
| if (size == 1) | |
| *val = (*val >> (8 * (where & 3))) & 0xff; | |
| else if (size == 2) | |
| *val = (*val >> (8 * (where & 2))) & 0xffff; | |
| dev_dbg(&bus->dev, "pcie-config-read: bus=%3d devfn=0x%04x where=0x%04x size=%d val=0x%08lx\n", | |
| bus->number, devfn, where, size, (unsigned long)*val); | |
| return ret; | |
| } | |
| /* Serialization is provided by 'pci_lock' in drivers/pci/access.c */ | |
| static int rcar_pcie_write_conf(struct pci_bus *bus, unsigned int devfn, | |
| int where, int size, u32 val) | |
| { | |
| struct rcar_pcie *pcie = bus->sysdata; | |
| int shift, ret; | |
| u32 data; | |
| ret = rcar_pcie_config_access(pcie, RCAR_PCI_ACCESS_READ, | |
| bus, devfn, where, &data); | |
| if (ret != PCIBIOS_SUCCESSFUL) | |
| return ret; | |
| dev_dbg(&bus->dev, "pcie-config-write: bus=%3d devfn=0x%04x where=0x%04x size=%d val=0x%08lx\n", | |
| bus->number, devfn, where, size, (unsigned long)val); | |
| if (size == 1) { | |
| shift = 8 * (where & 3); | |
| data &= ~(0xff << shift); | |
| data |= ((val & 0xff) << shift); | |
| } else if (size == 2) { | |
| shift = 8 * (where & 2); | |
| data &= ~(0xffff << shift); | |
| data |= ((val & 0xffff) << shift); | |
| } else | |
| data = val; | |
| ret = rcar_pcie_config_access(pcie, RCAR_PCI_ACCESS_WRITE, | |
| bus, devfn, where, &data); | |
| return ret; | |
| } | |
| static struct pci_ops rcar_pcie_ops = { | |
| .read = rcar_pcie_read_conf, | |
| .write = rcar_pcie_write_conf, | |
| }; | |
| static void rcar_pcie_setup_window(int win, struct rcar_pcie *pcie, | |
| struct resource *res) | |
| { | |
| /* Setup PCIe address space mappings for each resource */ | |
| resource_size_t size; | |
| resource_size_t res_start; | |
| u32 mask; | |
| rcar_pci_write_reg(pcie, 0x00000000, PCIEPTCTLR(win)); | |
| /* | |
| * The PAMR mask is calculated in units of 128Bytes, which | |
| * keeps things pretty simple. | |
| */ | |
| size = resource_size(res); | |
| mask = (roundup_pow_of_two(size) / SZ_128) - 1; | |
| rcar_pci_write_reg(pcie, mask << 7, PCIEPAMR(win)); | |
| if (res->flags & IORESOURCE_IO) | |
| res_start = pci_pio_to_address(res->start); | |
| else | |
| res_start = res->start; | |
| rcar_pci_write_reg(pcie, upper_32_bits(res_start), PCIEPAUR(win)); | |
| rcar_pci_write_reg(pcie, lower_32_bits(res_start) & ~0x7F, | |
| PCIEPALR(win)); | |
| /* First resource is for IO */ | |
| mask = PAR_ENABLE; | |
| if (res->flags & IORESOURCE_IO) | |
| mask |= IO_SPACE; | |
| rcar_pci_write_reg(pcie, mask, PCIEPTCTLR(win)); | |
| } | |
| static int rcar_pcie_setup(struct list_head *resource, struct rcar_pcie *pci) | |
| { | |
| struct resource_entry *win; | |
| int i = 0; | |
| /* Setup PCI resources */ | |
| resource_list_for_each_entry(win, &pci->resources) { | |
| struct resource *res = win->res; | |
| if (!res->flags) | |
| continue; | |
| switch (resource_type(res)) { | |
| case IORESOURCE_IO: | |
| case IORESOURCE_MEM: | |
| rcar_pcie_setup_window(i, pci, res); | |
| i++; | |
| break; | |
| case IORESOURCE_BUS: | |
| pci->root_bus_nr = res->start; | |
| break; | |
| default: | |
| continue; | |
| } | |
| pci_add_resource(resource, res); | |
| } | |
| return 1; | |
| } | |
| static void rcar_pcie_force_speedup(struct rcar_pcie *pcie) | |
| { | |
| struct device *dev = pcie->dev; | |
| unsigned int timeout = 1000; | |
| u32 macsr; | |
| if ((rcar_pci_read_reg(pcie, MACS2R) & LINK_SPEED) != LINK_SPEED_5_0GTS) | |
| return; | |
| if (rcar_pci_read_reg(pcie, MACCTLR) & SPEED_CHANGE) { | |
| dev_err(dev, "Speed change already in progress\n"); | |
| return; | |
| } | |
| macsr = rcar_pci_read_reg(pcie, MACSR); | |
| if ((macsr & LINK_SPEED) == LINK_SPEED_5_0GTS) | |
| goto done; | |
| /* Set target link speed to 5.0 GT/s */ | |
| rcar_rmw32(pcie, EXPCAP(12), PCI_EXP_LNKSTA_CLS, | |
| PCI_EXP_LNKSTA_CLS_5_0GB); | |
| /* Set speed change reason as intentional factor */ | |
| rcar_rmw32(pcie, MACCGSPSETR, SPCNGRSN, 0); | |
| /* Clear SPCHGFIN, SPCHGSUC, and SPCHGFAIL */ | |
| if (macsr & (SPCHGFIN | SPCHGSUC | SPCHGFAIL)) | |
| rcar_pci_write_reg(pcie, macsr, MACSR); | |
| /* Start link speed change */ | |
| rcar_rmw32(pcie, MACCTLR, SPEED_CHANGE, SPEED_CHANGE); | |
| while (timeout--) { | |
| macsr = rcar_pci_read_reg(pcie, MACSR); | |
| if (macsr & SPCHGFIN) { | |
| /* Clear the interrupt bits */ | |
| rcar_pci_write_reg(pcie, macsr, MACSR); | |
| if (macsr & SPCHGFAIL) | |
| dev_err(dev, "Speed change failed\n"); | |
| goto done; | |
| } | |
| msleep(1); | |
| } | |
| dev_err(dev, "Speed change timed out\n"); | |
| done: | |
| dev_info(dev, "Current link speed is %s GT/s\n", | |
| (macsr & LINK_SPEED) == LINK_SPEED_5_0GTS ? "5" : "2.5"); | |
| } | |
| static int rcar_pcie_enable(struct rcar_pcie *pcie) | |
| { | |
| struct device *dev = pcie->dev; | |
| struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie); | |
| struct pci_bus *bus, *child; | |
| int ret; | |
| /* Try setting 5 GT/s link speed */ | |
| rcar_pcie_force_speedup(pcie); | |
| rcar_pcie_setup(&bridge->windows, pcie); | |
| pci_add_flags(PCI_REASSIGN_ALL_BUS); | |
| bridge->dev.parent = dev; | |
| bridge->sysdata = pcie; | |
| bridge->busnr = pcie->root_bus_nr; | |
| bridge->ops = &rcar_pcie_ops; | |
| bridge->map_irq = of_irq_parse_and_map_pci; | |
| bridge->swizzle_irq = pci_common_swizzle; | |
| if (IS_ENABLED(CONFIG_PCI_MSI)) | |
| bridge->msi = &pcie->msi.chip; | |
| ret = pci_scan_root_bus_bridge(bridge); | |
| if (ret < 0) | |
| return ret; | |
| bus = bridge->bus; | |
| pci_bus_size_bridges(bus); | |
| pci_bus_assign_resources(bus); | |
| list_for_each_entry(child, &bus->children, node) | |
| pcie_bus_configure_settings(child); | |
| pci_bus_add_devices(bus); | |
| return 0; | |
| } | |
| static int phy_wait_for_ack(struct rcar_pcie *pcie) | |
| { | |
| struct device *dev = pcie->dev; | |
| unsigned int timeout = 100; | |
| while (timeout--) { | |
| if (rcar_pci_read_reg(pcie, H1_PCIEPHYADRR) & PHY_ACK) | |
| return 0; | |
| udelay(100); | |
| } | |
| dev_err(dev, "Access to PCIe phy timed out\n"); | |
| return -ETIMEDOUT; | |
| } | |
| static void phy_write_reg(struct rcar_pcie *pcie, | |
| unsigned int rate, unsigned int addr, | |
| unsigned int lane, unsigned int data) | |
| { | |
| unsigned long phyaddr; | |
| phyaddr = WRITE_CMD | | |
| ((rate & 1) << RATE_POS) | | |
| ((lane & 0xf) << LANE_POS) | | |
| ((addr & 0xff) << ADR_POS); | |
| /* Set write data */ | |
| rcar_pci_write_reg(pcie, data, H1_PCIEPHYDOUTR); | |
| rcar_pci_write_reg(pcie, phyaddr, H1_PCIEPHYADRR); | |
| /* Ignore errors as they will be dealt with if the data link is down */ | |
| phy_wait_for_ack(pcie); | |
| /* Clear command */ | |
| rcar_pci_write_reg(pcie, 0, H1_PCIEPHYDOUTR); | |
| rcar_pci_write_reg(pcie, 0, H1_PCIEPHYADRR); | |
| /* Ignore errors as they will be dealt with if the data link is down */ | |
| phy_wait_for_ack(pcie); | |
| } | |
| static int rcar_pcie_wait_for_phyrdy(struct rcar_pcie *pcie) | |
| { | |
| unsigned int timeout = 10; | |
| while (timeout--) { | |
| if (rcar_pci_read_reg(pcie, PCIEPHYSR) & PHYRDY) | |
| return 0; | |
| msleep(5); | |
| } | |
| return -ETIMEDOUT; | |
| } | |
| static int rcar_pcie_wait_for_dl(struct rcar_pcie *pcie) | |
| { | |
| unsigned int timeout = 10000; | |
| while (timeout--) { | |
| if ((rcar_pci_read_reg(pcie, PCIETSTR) & DATA_LINK_ACTIVE)) | |
| return 0; | |
| udelay(5); | |
| cpu_relax(); | |
| } | |
| return -ETIMEDOUT; | |
| } | |
| static int rcar_pcie_hw_init(struct rcar_pcie *pcie) | |
| { | |
| int err; | |
| /* Begin initialization */ | |
| rcar_pci_write_reg(pcie, 0, PCIETCTLR); | |
| /* Set mode */ | |
| rcar_pci_write_reg(pcie, 1, PCIEMSR); | |
| err = rcar_pcie_wait_for_phyrdy(pcie); | |
| if (err) | |
| return err; | |
| /* | |
| * Initial header for port config space is type 1, set the device | |
| * class to match. Hardware takes care of propagating the IDSETR | |
| * settings, so there is no need to bother with a quirk. | |
| */ | |
| rcar_pci_write_reg(pcie, PCI_CLASS_BRIDGE_PCI << 16, IDSETR1); | |
| /* | |
| * Setup Secondary Bus Number & Subordinate Bus Number, even though | |
| * they aren't used, to avoid bridge being detected as broken. | |
| */ | |
| rcar_rmw32(pcie, RCONF(PCI_SECONDARY_BUS), 0xff, 1); | |
| rcar_rmw32(pcie, RCONF(PCI_SUBORDINATE_BUS), 0xff, 1); | |
| /* Initialize default capabilities. */ | |
| rcar_rmw32(pcie, REXPCAP(0), 0xff, PCI_CAP_ID_EXP); | |
| rcar_rmw32(pcie, REXPCAP(PCI_EXP_FLAGS), | |
| PCI_EXP_FLAGS_TYPE, PCI_EXP_TYPE_ROOT_PORT << 4); | |
| rcar_rmw32(pcie, RCONF(PCI_HEADER_TYPE), 0x7f, | |
| PCI_HEADER_TYPE_BRIDGE); | |
| /* Enable data link layer active state reporting */ | |
| rcar_rmw32(pcie, REXPCAP(PCI_EXP_LNKCAP), PCI_EXP_LNKCAP_DLLLARC, | |
| PCI_EXP_LNKCAP_DLLLARC); | |
| /* Write out the physical slot number = 0 */ | |
| rcar_rmw32(pcie, REXPCAP(PCI_EXP_SLTCAP), PCI_EXP_SLTCAP_PSN, 0); | |
| /* Set the completion timer timeout to the maximum 50ms. */ | |
| rcar_rmw32(pcie, TLCTLR + 1, 0x3f, 50); | |
| /* Terminate list of capabilities (Next Capability Offset=0) */ | |
| rcar_rmw32(pcie, RVCCAP(0), 0xfff00000, 0); | |
| /* Enable MSI */ | |
| if (IS_ENABLED(CONFIG_PCI_MSI)) | |
| rcar_pci_write_reg(pcie, 0x801f0000, PCIEMSITXR); | |
| /* Finish initialization - establish a PCI Express link */ | |
| rcar_pci_write_reg(pcie, CFINIT, PCIETCTLR); | |
| /* This will timeout if we don't have a link. */ | |
| err = rcar_pcie_wait_for_dl(pcie); | |
| if (err) | |
| return err; | |
| /* Enable INTx interrupts */ | |
| rcar_rmw32(pcie, PCIEINTXR, 0, 0xF << 8); | |
| wmb(); | |
| return 0; | |
| } | |
| static int rcar_pcie_phy_init_h1(struct rcar_pcie *pcie) | |
| { | |
| /* Initialize the phy */ | |
| phy_write_reg(pcie, 0, 0x42, 0x1, 0x0EC34191); | |
| phy_write_reg(pcie, 1, 0x42, 0x1, 0x0EC34180); | |
| phy_write_reg(pcie, 0, 0x43, 0x1, 0x00210188); | |
| phy_write_reg(pcie, 1, 0x43, 0x1, 0x00210188); | |
| phy_write_reg(pcie, 0, 0x44, 0x1, 0x015C0014); | |
| phy_write_reg(pcie, 1, 0x44, 0x1, 0x015C0014); | |
| phy_write_reg(pcie, 1, 0x4C, 0x1, 0x786174A0); | |
| phy_write_reg(pcie, 1, 0x4D, 0x1, 0x048000BB); | |
| phy_write_reg(pcie, 0, 0x51, 0x1, 0x079EC062); | |
| phy_write_reg(pcie, 0, 0x52, 0x1, 0x20000000); | |
| phy_write_reg(pcie, 1, 0x52, 0x1, 0x20000000); | |
| phy_write_reg(pcie, 1, 0x56, 0x1, 0x00003806); | |
| phy_write_reg(pcie, 0, 0x60, 0x1, 0x004B03A5); | |
| phy_write_reg(pcie, 0, 0x64, 0x1, 0x3F0F1F0F); | |
| phy_write_reg(pcie, 0, 0x66, 0x1, 0x00008000); | |
| return 0; | |
| } | |
| static int rcar_pcie_phy_init_gen2(struct rcar_pcie *pcie) | |
| { | |
| /* | |
| * These settings come from the R-Car Series, 2nd Generation User's | |
| * Manual, section 50.3.1 (2) Initialization of the physical layer. | |
| */ | |
| rcar_pci_write_reg(pcie, 0x000f0030, GEN2_PCIEPHYADDR); | |
| rcar_pci_write_reg(pcie, 0x00381203, GEN2_PCIEPHYDATA); | |
| rcar_pci_write_reg(pcie, 0x00000001, GEN2_PCIEPHYCTRL); | |
| rcar_pci_write_reg(pcie, 0x00000006, GEN2_PCIEPHYCTRL); | |
| rcar_pci_write_reg(pcie, 0x000f0054, GEN2_PCIEPHYADDR); | |
| /* The following value is for DC connection, no termination resistor */ | |
| rcar_pci_write_reg(pcie, 0x13802007, GEN2_PCIEPHYDATA); | |
| rcar_pci_write_reg(pcie, 0x00000001, GEN2_PCIEPHYCTRL); | |
| rcar_pci_write_reg(pcie, 0x00000006, GEN2_PCIEPHYCTRL); | |
| return 0; | |
| } | |
| static int rcar_pcie_phy_init_gen3(struct rcar_pcie *pcie) | |
| { | |
| int err; | |
| err = phy_init(pcie->phy); | |
| if (err) | |
| return err; | |
| err = phy_power_on(pcie->phy); | |
| if (err) | |
| phy_exit(pcie->phy); | |
| return err; | |
| } | |
| static int rcar_msi_alloc(struct rcar_msi *chip) | |
| { | |
| int msi; | |
| mutex_lock(&chip->lock); | |
| msi = find_first_zero_bit(chip->used, INT_PCI_MSI_NR); | |
| if (msi < INT_PCI_MSI_NR) | |
| set_bit(msi, chip->used); | |
| else | |
| msi = -ENOSPC; | |
| mutex_unlock(&chip->lock); | |
| return msi; | |
| } | |
| static int rcar_msi_alloc_region(struct rcar_msi *chip, int no_irqs) | |
| { | |
| int msi; | |
| mutex_lock(&chip->lock); | |
| msi = bitmap_find_free_region(chip->used, INT_PCI_MSI_NR, | |
| order_base_2(no_irqs)); | |
| mutex_unlock(&chip->lock); | |
| return msi; | |
| } | |
| static void rcar_msi_free(struct rcar_msi *chip, unsigned long irq) | |
| { | |
| mutex_lock(&chip->lock); | |
| clear_bit(irq, chip->used); | |
| mutex_unlock(&chip->lock); | |
| } | |
| static irqreturn_t rcar_pcie_msi_irq(int irq, void *data) | |
| { | |
| struct rcar_pcie *pcie = data; | |
| struct rcar_msi *msi = &pcie->msi; | |
| struct device *dev = pcie->dev; | |
| unsigned long reg; | |
| reg = rcar_pci_read_reg(pcie, PCIEMSIFR); | |
| /* MSI & INTx share an interrupt - we only handle MSI here */ | |
| if (!reg) | |
| return IRQ_NONE; | |
| while (reg) { | |
| unsigned int index = find_first_bit(®, 32); | |
| unsigned int irq; | |
| /* clear the interrupt */ | |
| rcar_pci_write_reg(pcie, 1 << index, PCIEMSIFR); | |
| irq = irq_find_mapping(msi->domain, index); | |
| if (irq) { | |
| if (test_bit(index, msi->used)) | |
| generic_handle_irq(irq); | |
| else | |
| dev_info(dev, "unhandled MSI\n"); | |
| } else { | |
| /* Unknown MSI, just clear it */ | |
| dev_dbg(dev, "unexpected MSI\n"); | |
| } | |
| /* see if there's any more pending in this vector */ | |
| reg = rcar_pci_read_reg(pcie, PCIEMSIFR); | |
| } | |
| return IRQ_HANDLED; | |
| } | |
| static int rcar_msi_setup_irq(struct msi_controller *chip, struct pci_dev *pdev, | |
| struct msi_desc *desc) | |
| { | |
| struct rcar_msi *msi = to_rcar_msi(chip); | |
| struct rcar_pcie *pcie = container_of(chip, struct rcar_pcie, msi.chip); | |
| struct msi_msg msg; | |
| unsigned int irq; | |
| int hwirq; | |
| hwirq = rcar_msi_alloc(msi); | |
| if (hwirq < 0) | |
| return hwirq; | |
| irq = irq_find_mapping(msi->domain, hwirq); | |
| if (!irq) { | |
| rcar_msi_free(msi, hwirq); | |
| return -EINVAL; | |
| } | |
| irq_set_msi_desc(irq, desc); | |
| msg.address_lo = rcar_pci_read_reg(pcie, PCIEMSIALR) & ~MSIFE; | |
| msg.address_hi = rcar_pci_read_reg(pcie, PCIEMSIAUR); | |
| msg.data = hwirq; | |
| pci_write_msi_msg(irq, &msg); | |
| return 0; | |
| } | |
| static int rcar_msi_setup_irqs(struct msi_controller *chip, | |
| struct pci_dev *pdev, int nvec, int type) | |
| { | |
| struct rcar_pcie *pcie = container_of(chip, struct rcar_pcie, msi.chip); | |
| struct rcar_msi *msi = to_rcar_msi(chip); | |
| struct msi_desc *desc; | |
| struct msi_msg msg; | |
| unsigned int irq; | |
| int hwirq; | |
| int i; | |
| /* MSI-X interrupts are not supported */ | |
| if (type == PCI_CAP_ID_MSIX) | |
| return -EINVAL; | |
| WARN_ON(!list_is_singular(&pdev->dev.msi_list)); | |
| desc = list_entry(pdev->dev.msi_list.next, struct msi_desc, list); | |
| hwirq = rcar_msi_alloc_region(msi, nvec); | |
| if (hwirq < 0) | |
| return -ENOSPC; | |
| irq = irq_find_mapping(msi->domain, hwirq); | |
| if (!irq) | |
| return -ENOSPC; | |
| for (i = 0; i < nvec; i++) { | |
| /* | |
| * irq_create_mapping() called from rcar_pcie_probe() pre- | |
| * allocates descs, so there is no need to allocate descs here. | |
| * We can therefore assume that if irq_find_mapping() above | |
| * returns non-zero, then the descs are also successfully | |
| * allocated. | |
| */ | |
| if (irq_set_msi_desc_off(irq, i, desc)) { | |
| /* TODO: clear */ | |
| return -EINVAL; | |
| } | |
| } | |
| desc->nvec_used = nvec; | |
| desc->msi_attrib.multiple = order_base_2(nvec); | |
| msg.address_lo = rcar_pci_read_reg(pcie, PCIEMSIALR) & ~MSIFE; | |
| msg.address_hi = rcar_pci_read_reg(pcie, PCIEMSIAUR); | |
| msg.data = hwirq; | |
| pci_write_msi_msg(irq, &msg); | |
| return 0; | |
| } | |
| static void rcar_msi_teardown_irq(struct msi_controller *chip, unsigned int irq) | |
| { | |
| struct rcar_msi *msi = to_rcar_msi(chip); | |
| struct irq_data *d = irq_get_irq_data(irq); | |
| rcar_msi_free(msi, d->hwirq); | |
| } | |
| static struct irq_chip rcar_msi_irq_chip = { | |
| .name = "R-Car PCIe MSI", | |
| .irq_enable = pci_msi_unmask_irq, | |
| .irq_disable = pci_msi_mask_irq, | |
| .irq_mask = pci_msi_mask_irq, | |
| .irq_unmask = pci_msi_unmask_irq, | |
| }; | |
| static int rcar_msi_map(struct irq_domain *domain, unsigned int irq, | |
| irq_hw_number_t hwirq) | |
| { | |
| irq_set_chip_and_handler(irq, &rcar_msi_irq_chip, handle_simple_irq); | |
| irq_set_chip_data(irq, domain->host_data); | |
| return 0; | |
| } | |
| static const struct irq_domain_ops msi_domain_ops = { | |
| .map = rcar_msi_map, | |
| }; | |
| static void rcar_pcie_unmap_msi(struct rcar_pcie *pcie) | |
| { | |
| struct rcar_msi *msi = &pcie->msi; | |
| int i, irq; | |
| for (i = 0; i < INT_PCI_MSI_NR; i++) { | |
| irq = irq_find_mapping(msi->domain, i); | |
| if (irq > 0) | |
| irq_dispose_mapping(irq); | |
| } | |
| irq_domain_remove(msi->domain); | |
| } | |
| static int rcar_pcie_enable_msi(struct rcar_pcie *pcie) | |
| { | |
| struct device *dev = pcie->dev; | |
| struct rcar_msi *msi = &pcie->msi; | |
| unsigned long base; | |
| int err, i; | |
| mutex_init(&msi->lock); | |
| msi->chip.dev = dev; | |
| msi->chip.setup_irq = rcar_msi_setup_irq; | |
| msi->chip.setup_irqs = rcar_msi_setup_irqs; | |
| msi->chip.teardown_irq = rcar_msi_teardown_irq; | |
| msi->domain = irq_domain_add_linear(dev->of_node, INT_PCI_MSI_NR, | |
| &msi_domain_ops, &msi->chip); | |
| if (!msi->domain) { | |
| dev_err(dev, "failed to create IRQ domain\n"); | |
| return -ENOMEM; | |
| } | |
| for (i = 0; i < INT_PCI_MSI_NR; i++) | |
| irq_create_mapping(msi->domain, i); | |
| /* Two irqs are for MSI, but they are also used for non-MSI irqs */ | |
| err = devm_request_irq(dev, msi->irq1, rcar_pcie_msi_irq, | |
| IRQF_SHARED | IRQF_NO_THREAD, | |
| rcar_msi_irq_chip.name, pcie); | |
| if (err < 0) { | |
| dev_err(dev, "failed to request IRQ: %d\n", err); | |
| goto err; | |
| } | |
| err = devm_request_irq(dev, msi->irq2, rcar_pcie_msi_irq, | |
| IRQF_SHARED | IRQF_NO_THREAD, | |
| rcar_msi_irq_chip.name, pcie); | |
| if (err < 0) { | |
| dev_err(dev, "failed to request IRQ: %d\n", err); | |
| goto err; | |
| } | |
| /* setup MSI data target */ | |
| msi->pages = __get_free_pages(GFP_KERNEL, 0); | |
| base = virt_to_phys((void *)msi->pages); | |
| rcar_pci_write_reg(pcie, base | MSIFE, PCIEMSIALR); | |
| rcar_pci_write_reg(pcie, 0, PCIEMSIAUR); | |
| /* enable all MSI interrupts */ | |
| rcar_pci_write_reg(pcie, 0xffffffff, PCIEMSIIER); | |
| return 0; | |
| err: | |
| rcar_pcie_unmap_msi(pcie); | |
| return err; | |
| } | |
| static void rcar_pcie_teardown_msi(struct rcar_pcie *pcie) | |
| { | |
| struct rcar_msi *msi = &pcie->msi; | |
| /* Disable all MSI interrupts */ | |
| rcar_pci_write_reg(pcie, 0, PCIEMSIIER); | |
| /* Disable address decoding of the MSI interrupt, MSIFE */ | |
| rcar_pci_write_reg(pcie, 0, PCIEMSIALR); | |
| free_pages(msi->pages, 0); | |
| rcar_pcie_unmap_msi(pcie); | |
| } | |
| static int rcar_pcie_get_resources(struct rcar_pcie *pcie) | |
| { | |
| struct device *dev = pcie->dev; | |
| struct resource res; | |
| int err, i; | |
| pcie->phy = devm_phy_optional_get(dev, "pcie"); | |
| if (IS_ERR(pcie->phy)) | |
| return PTR_ERR(pcie->phy); | |
| err = of_address_to_resource(dev->of_node, 0, &res); | |
| if (err) | |
| return err; | |
| pcie->base = devm_ioremap_resource(dev, &res); | |
| if (IS_ERR(pcie->base)) | |
| return PTR_ERR(pcie->base); | |
| pcie->bus_clk = devm_clk_get(dev, "pcie_bus"); | |
| if (IS_ERR(pcie->bus_clk)) { | |
| dev_err(dev, "cannot get pcie bus clock\n"); | |
| return PTR_ERR(pcie->bus_clk); | |
| } | |
| i = irq_of_parse_and_map(dev->of_node, 0); | |
| if (!i) { | |
| dev_err(dev, "cannot get platform resources for msi interrupt\n"); | |
| err = -ENOENT; | |
| goto err_irq1; | |
| } | |
| pcie->msi.irq1 = i; | |
| i = irq_of_parse_and_map(dev->of_node, 1); | |
| if (!i) { | |
| dev_err(dev, "cannot get platform resources for msi interrupt\n"); | |
| err = -ENOENT; | |
| goto err_irq2; | |
| } | |
| pcie->msi.irq2 = i; | |
| return 0; | |
| err_irq2: | |
| irq_dispose_mapping(pcie->msi.irq1); | |
| err_irq1: | |
| return err; | |
| } | |
| static int rcar_pcie_inbound_ranges(struct rcar_pcie *pcie, | |
| struct of_pci_range *range, | |
| int *index) | |
| { | |
| u64 restype = range->flags; | |
| u64 cpu_addr = range->cpu_addr; | |
| u64 cpu_end = range->cpu_addr + range->size; | |
| u64 pci_addr = range->pci_addr; | |
| u32 flags = LAM_64BIT | LAR_ENABLE; | |
| u64 mask; | |
| u64 size; | |
| int idx = *index; | |
| if (restype & IORESOURCE_PREFETCH) | |
| flags |= LAM_PREFETCH; | |
| /* | |
| * If the size of the range is larger than the alignment of the start | |
| * address, we have to use multiple entries to perform the mapping. | |
| */ | |
| if (cpu_addr > 0) { | |
| unsigned long nr_zeros = __ffs64(cpu_addr); | |
| u64 alignment = 1ULL << nr_zeros; | |
| size = min(range->size, alignment); | |
| } else { | |
| size = range->size; | |
| } | |
| /* Hardware supports max 4GiB inbound region */ | |
| size = min(size, 1ULL << 32); | |
| mask = roundup_pow_of_two(size) - 1; | |
| mask &= ~0xf; | |
| while (cpu_addr < cpu_end) { | |
| /* | |
| * Set up 64-bit inbound regions as the range parser doesn't | |
| * distinguish between 32 and 64-bit types. | |
| */ | |
| rcar_pci_write_reg(pcie, lower_32_bits(pci_addr), | |
| PCIEPRAR(idx)); | |
| rcar_pci_write_reg(pcie, lower_32_bits(cpu_addr), PCIELAR(idx)); | |
| rcar_pci_write_reg(pcie, lower_32_bits(mask) | flags, | |
| PCIELAMR(idx)); | |
| rcar_pci_write_reg(pcie, upper_32_bits(pci_addr), | |
| PCIEPRAR(idx + 1)); | |
| rcar_pci_write_reg(pcie, upper_32_bits(cpu_addr), | |
| PCIELAR(idx + 1)); | |
| rcar_pci_write_reg(pcie, 0, PCIELAMR(idx + 1)); | |
| pci_addr += size; | |
| cpu_addr += size; | |
| idx += 2; | |
| if (idx > MAX_NR_INBOUND_MAPS) { | |
| dev_err(pcie->dev, "Failed to map inbound regions!\n"); | |
| return -EINVAL; | |
| } | |
| } | |
| *index = idx; | |
| return 0; | |
| } | |
| static int rcar_pcie_parse_map_dma_ranges(struct rcar_pcie *pcie, | |
| struct device_node *np) | |
| { | |
| struct of_pci_range range; | |
| struct of_pci_range_parser parser; | |
| int index = 0; | |
| int err; | |
| if (of_pci_dma_range_parser_init(&parser, np)) | |
| return -EINVAL; | |
| /* Get the dma-ranges from DT */ | |
| for_each_of_pci_range(&parser, &range) { | |
| u64 end = range.cpu_addr + range.size - 1; | |
| dev_dbg(pcie->dev, "0x%08x 0x%016llx..0x%016llx -> 0x%016llx\n", | |
| range.flags, range.cpu_addr, end, range.pci_addr); | |
| err = rcar_pcie_inbound_ranges(pcie, &range, &index); | |
| if (err) | |
| return err; | |
| } | |
| return 0; | |
| } | |
| static const struct of_device_id rcar_pcie_of_match[] = { | |
| { .compatible = "renesas,pcie-r8a7779", | |
| .data = rcar_pcie_phy_init_h1 }, | |
| { .compatible = "renesas,pcie-r8a7790", | |
| .data = rcar_pcie_phy_init_gen2 }, | |
| { .compatible = "renesas,pcie-r8a7791", | |
| .data = rcar_pcie_phy_init_gen2 }, | |
| { .compatible = "renesas,pcie-rcar-gen2", | |
| .data = rcar_pcie_phy_init_gen2 }, | |
| { .compatible = "renesas,pcie-r8a7795", | |
| .data = rcar_pcie_phy_init_gen3 }, | |
| { .compatible = "renesas,pcie-rcar-gen3", | |
| .data = rcar_pcie_phy_init_gen3 }, | |
| {}, | |
| }; | |
| static int rcar_pcie_probe(struct platform_device *pdev) | |
| { | |
| struct device *dev = &pdev->dev; | |
| struct rcar_pcie *pcie; | |
| unsigned int data; | |
| int err; | |
| int (*phy_init_fn)(struct rcar_pcie *); | |
| struct pci_host_bridge *bridge; | |
| bridge = pci_alloc_host_bridge(sizeof(*pcie)); | |
| if (!bridge) | |
| return -ENOMEM; | |
| pcie = pci_host_bridge_priv(bridge); | |
| pcie->dev = dev; | |
| err = pci_parse_request_of_pci_ranges(dev, &pcie->resources, NULL); | |
| if (err) | |
| goto err_free_bridge; | |
| pm_runtime_enable(pcie->dev); | |
| err = pm_runtime_get_sync(pcie->dev); | |
| if (err < 0) { | |
| dev_err(pcie->dev, "pm_runtime_get_sync failed\n"); | |
| goto err_pm_disable; | |
| } | |
| err = rcar_pcie_get_resources(pcie); | |
| if (err < 0) { | |
| dev_err(dev, "failed to request resources: %d\n", err); | |
| goto err_pm_put; | |
| } | |
| err = clk_prepare_enable(pcie->bus_clk); | |
| if (err) { | |
| dev_err(dev, "failed to enable bus clock: %d\n", err); | |
| goto err_unmap_msi_irqs; | |
| } | |
| err = rcar_pcie_parse_map_dma_ranges(pcie, dev->of_node); | |
| if (err) | |
| goto err_clk_disable; | |
| phy_init_fn = of_device_get_match_data(dev); | |
| err = phy_init_fn(pcie); | |
| if (err) { | |
| dev_err(dev, "failed to init PCIe PHY\n"); | |
| goto err_clk_disable; | |
| } | |
| /* Failure to get a link might just be that no cards are inserted */ | |
| if (rcar_pcie_hw_init(pcie)) { | |
| dev_info(dev, "PCIe link down\n"); | |
| err = -ENODEV; | |
| goto err_phy_shutdown; | |
| } | |
| data = rcar_pci_read_reg(pcie, MACSR); | |
| dev_info(dev, "PCIe x%d: link up\n", (data >> 20) & 0x3f); | |
| if (IS_ENABLED(CONFIG_PCI_MSI)) { | |
| err = rcar_pcie_enable_msi(pcie); | |
| if (err < 0) { | |
| dev_err(dev, | |
| "failed to enable MSI support: %d\n", | |
| err); | |
| goto err_phy_shutdown; | |
| } | |
| } | |
| err = rcar_pcie_enable(pcie); | |
| if (err) | |
| goto err_msi_teardown; | |
| return 0; | |
| err_msi_teardown: | |
| if (IS_ENABLED(CONFIG_PCI_MSI)) | |
| rcar_pcie_teardown_msi(pcie); | |
| err_phy_shutdown: | |
| if (pcie->phy) { | |
| phy_power_off(pcie->phy); | |
| phy_exit(pcie->phy); | |
| } | |
| err_clk_disable: | |
| clk_disable_unprepare(pcie->bus_clk); | |
| err_unmap_msi_irqs: | |
| irq_dispose_mapping(pcie->msi.irq2); | |
| irq_dispose_mapping(pcie->msi.irq1); | |
| err_pm_put: | |
| pm_runtime_put(dev); | |
| err_pm_disable: | |
| pm_runtime_disable(dev); | |
| pci_free_resource_list(&pcie->resources); | |
| err_free_bridge: | |
| pci_free_host_bridge(bridge); | |
| return err; | |
| } | |
| static struct platform_driver rcar_pcie_driver = { | |
| .driver = { | |
| .name = "rcar-pcie", | |
| .of_match_table = rcar_pcie_of_match, | |
| .suppress_bind_attrs = true, | |
| }, | |
| .probe = rcar_pcie_probe, | |
| }; | |
| builtin_platform_driver(rcar_pcie_driver); |