| Spreadtrum Clock Binding | |
| ------------------------ | |
| Required properties: | |
| - compatible: should contain the following compatible strings: | |
| - "sprd,sc9860-pmu-gate" | |
| - "sprd,sc9860-pll" | |
| - "sprd,sc9860-ap-clk" | |
| - "sprd,sc9860-aon-prediv" | |
| - "sprd,sc9860-apahb-gate" | |
| - "sprd,sc9860-aon-gate" | |
| - "sprd,sc9860-aonsecure-clk" | |
| - "sprd,sc9860-agcp-gate" | |
| - "sprd,sc9860-gpu-clk" | |
| - "sprd,sc9860-vsp-clk" | |
| - "sprd,sc9860-vsp-gate" | |
| - "sprd,sc9860-cam-clk" | |
| - "sprd,sc9860-cam-gate" | |
| - "sprd,sc9860-disp-clk" | |
| - "sprd,sc9860-disp-gate" | |
| - "sprd,sc9860-apapb-gate" | |
| - #clock-cells: must be 1 | |
| - clocks : Should be the input parent clock(s) phandle for the clock, this | |
| property here just simply shows which clock group the clocks' | |
| parents are in, since each clk node would represent many clocks | |
| which are defined in the driver. The detailed dependency | |
| relationship (i.e. how many parents and which are the parents) | |
| are implemented in driver code. | |
| Optional properties: | |
| - reg: Contain the registers base address and length. It must be configured | |
| only if no 'sprd,syscon' under the node. | |
| - sprd,syscon: phandle to the syscon which is in the same address area with | |
| the clock, and so we can get regmap for the clocks from the | |
| syscon device. | |
| Example: | |
| pmu_gate: pmu-gate { | |
| compatible = "sprd,sc9860-pmu-gate"; | |
| sprd,syscon = <&pmu_regs>; | |
| clocks = <&ext_26m>; | |
| #clock-cells = <1>; | |
| }; | |
| pll: pll { | |
| compatible = "sprd,sc9860-pll"; | |
| sprd,syscon = <&ana_regs>; | |
| clocks = <&pmu_gate 0>; | |
| #clock-cells = <1>; | |
| }; | |
| ap_clk: clock-controller@20000000 { | |
| compatible = "sprd,sc9860-ap-clk"; | |
| reg = <0 0x20000000 0 0x400>; | |
| clocks = <&ext_26m>, <&pll 0>, | |
| <&pmu_gate 0>; | |
| #clock-cells = <1>; | |
| }; |