| /* | 
 |  * arch/arm/mach-at91/at91rm9200.c | 
 |  * | 
 |  *  Copyright (C) 2005 SAN People | 
 |  * | 
 |  * This program is free software; you can redistribute it and/or modify | 
 |  * it under the terms of the GNU General Public License as published by | 
 |  * the Free Software Foundation; either version 2 of the License, or | 
 |  * (at your option) any later version. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/module.h> | 
 |  | 
 | #include <asm/irq.h> | 
 | #include <asm/mach/arch.h> | 
 | #include <asm/mach/map.h> | 
 | #include <asm/system_misc.h> | 
 | #include <mach/at91rm9200.h> | 
 | #include <mach/at91_pmc.h> | 
 | #include <mach/at91_st.h> | 
 | #include <mach/cpu.h> | 
 |  | 
 | #include "soc.h" | 
 | #include "generic.h" | 
 | #include "clock.h" | 
 | #include "sam9_smc.h" | 
 |  | 
 | static struct map_desc at91rm9200_io_desc[] __initdata = { | 
 | 	{ | 
 | 		.virtual	= AT91_VA_BASE_EMAC, | 
 | 		.pfn		= __phys_to_pfn(AT91RM9200_BASE_EMAC), | 
 | 		.length		= SZ_16K, | 
 | 		.type		= MT_DEVICE, | 
 | 	}, | 
 | }; | 
 |  | 
 | /* -------------------------------------------------------------------- | 
 |  *  Clocks | 
 |  * -------------------------------------------------------------------- */ | 
 |  | 
 | /* | 
 |  * The peripheral clocks. | 
 |  */ | 
 | static struct clk udc_clk = { | 
 | 	.name		= "udc_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_UDP, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk ohci_clk = { | 
 | 	.name		= "ohci_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_UHP, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk ether_clk = { | 
 | 	.name		= "ether_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_EMAC, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk mmc_clk = { | 
 | 	.name		= "mci_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_MCI, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk twi_clk = { | 
 | 	.name		= "twi_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_TWI, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk usart0_clk = { | 
 | 	.name		= "usart0_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_US0, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk usart1_clk = { | 
 | 	.name		= "usart1_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_US1, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk usart2_clk = { | 
 | 	.name		= "usart2_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_US2, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk usart3_clk = { | 
 | 	.name		= "usart3_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_US3, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk spi_clk = { | 
 | 	.name		= "spi_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_SPI, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk pioA_clk = { | 
 | 	.name		= "pioA_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_PIOA, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk pioB_clk = { | 
 | 	.name		= "pioB_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_PIOB, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk pioC_clk = { | 
 | 	.name		= "pioC_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_PIOC, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk pioD_clk = { | 
 | 	.name		= "pioD_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_PIOD, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk ssc0_clk = { | 
 | 	.name		= "ssc0_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_SSC0, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk ssc1_clk = { | 
 | 	.name		= "ssc1_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_SSC1, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk ssc2_clk = { | 
 | 	.name		= "ssc2_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_SSC2, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk tc0_clk = { | 
 | 	.name		= "tc0_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_TC0, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk tc1_clk = { | 
 | 	.name		= "tc1_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_TC1, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk tc2_clk = { | 
 | 	.name		= "tc2_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_TC2, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk tc3_clk = { | 
 | 	.name		= "tc3_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_TC3, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk tc4_clk = { | 
 | 	.name		= "tc4_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_TC4, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 | static struct clk tc5_clk = { | 
 | 	.name		= "tc5_clk", | 
 | 	.pmc_mask	= 1 << AT91RM9200_ID_TC5, | 
 | 	.type		= CLK_TYPE_PERIPHERAL, | 
 | }; | 
 |  | 
 | static struct clk *periph_clocks[] __initdata = { | 
 | 	&pioA_clk, | 
 | 	&pioB_clk, | 
 | 	&pioC_clk, | 
 | 	&pioD_clk, | 
 | 	&usart0_clk, | 
 | 	&usart1_clk, | 
 | 	&usart2_clk, | 
 | 	&usart3_clk, | 
 | 	&mmc_clk, | 
 | 	&udc_clk, | 
 | 	&twi_clk, | 
 | 	&spi_clk, | 
 | 	&ssc0_clk, | 
 | 	&ssc1_clk, | 
 | 	&ssc2_clk, | 
 | 	&tc0_clk, | 
 | 	&tc1_clk, | 
 | 	&tc2_clk, | 
 | 	&tc3_clk, | 
 | 	&tc4_clk, | 
 | 	&tc5_clk, | 
 | 	&ohci_clk, | 
 | 	ðer_clk, | 
 | 	// irq0 .. irq6 | 
 | }; | 
 |  | 
 | static struct clk_lookup periph_clocks_lookups[] = { | 
 | 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), | 
 | 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), | 
 | 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), | 
 | 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), | 
 | 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), | 
 | 	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), | 
 | 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), | 
 | 	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), | 
 | 	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), | 
 | 	/* fake hclk clock */ | 
 | 	CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), | 
 | 	CLKDEV_CON_ID("pioA", &pioA_clk), | 
 | 	CLKDEV_CON_ID("pioB", &pioB_clk), | 
 | 	CLKDEV_CON_ID("pioC", &pioC_clk), | 
 | 	CLKDEV_CON_ID("pioD", &pioD_clk), | 
 | }; | 
 |  | 
 | static struct clk_lookup usart_clocks_lookups[] = { | 
 | 	CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), | 
 | 	CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), | 
 | 	CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), | 
 | 	CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), | 
 | 	CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), | 
 | }; | 
 |  | 
 | /* | 
 |  * The four programmable clocks. | 
 |  * You must configure pin multiplexing to bring these signals out. | 
 |  */ | 
 | static struct clk pck0 = { | 
 | 	.name		= "pck0", | 
 | 	.pmc_mask	= AT91_PMC_PCK0, | 
 | 	.type		= CLK_TYPE_PROGRAMMABLE, | 
 | 	.id		= 0, | 
 | }; | 
 | static struct clk pck1 = { | 
 | 	.name		= "pck1", | 
 | 	.pmc_mask	= AT91_PMC_PCK1, | 
 | 	.type		= CLK_TYPE_PROGRAMMABLE, | 
 | 	.id		= 1, | 
 | }; | 
 | static struct clk pck2 = { | 
 | 	.name		= "pck2", | 
 | 	.pmc_mask	= AT91_PMC_PCK2, | 
 | 	.type		= CLK_TYPE_PROGRAMMABLE, | 
 | 	.id		= 2, | 
 | }; | 
 | static struct clk pck3 = { | 
 | 	.name		= "pck3", | 
 | 	.pmc_mask	= AT91_PMC_PCK3, | 
 | 	.type		= CLK_TYPE_PROGRAMMABLE, | 
 | 	.id		= 3, | 
 | }; | 
 |  | 
 | static void __init at91rm9200_register_clocks(void) | 
 | { | 
 | 	int i; | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) | 
 | 		clk_register(periph_clocks[i]); | 
 |  | 
 | 	clkdev_add_table(periph_clocks_lookups, | 
 | 			 ARRAY_SIZE(periph_clocks_lookups)); | 
 | 	clkdev_add_table(usart_clocks_lookups, | 
 | 			 ARRAY_SIZE(usart_clocks_lookups)); | 
 |  | 
 | 	clk_register(&pck0); | 
 | 	clk_register(&pck1); | 
 | 	clk_register(&pck2); | 
 | 	clk_register(&pck3); | 
 | } | 
 |  | 
 | static struct clk_lookup console_clock_lookup; | 
 |  | 
 | void __init at91rm9200_set_console_clock(int id) | 
 | { | 
 | 	if (id >= ARRAY_SIZE(usart_clocks_lookups)) | 
 | 		return; | 
 |  | 
 | 	console_clock_lookup.con_id = "usart"; | 
 | 	console_clock_lookup.clk = usart_clocks_lookups[id].clk; | 
 | 	clkdev_add(&console_clock_lookup); | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------- | 
 |  *  GPIO | 
 |  * -------------------------------------------------------------------- */ | 
 |  | 
 | static struct at91_gpio_bank at91rm9200_gpio[] __initdata = { | 
 | 	{ | 
 | 		.id		= AT91RM9200_ID_PIOA, | 
 | 		.regbase	= AT91RM9200_BASE_PIOA, | 
 | 	}, { | 
 | 		.id		= AT91RM9200_ID_PIOB, | 
 | 		.regbase	= AT91RM9200_BASE_PIOB, | 
 | 	}, { | 
 | 		.id		= AT91RM9200_ID_PIOC, | 
 | 		.regbase	= AT91RM9200_BASE_PIOC, | 
 | 	}, { | 
 | 		.id		= AT91RM9200_ID_PIOD, | 
 | 		.regbase	= AT91RM9200_BASE_PIOD, | 
 | 	} | 
 | }; | 
 |  | 
 | static void at91rm9200_idle(void) | 
 | { | 
 | 	/* | 
 | 	 * Disable the processor clock.  The processor will be automatically | 
 | 	 * re-enabled by an interrupt or by a reset. | 
 | 	 */ | 
 | 	at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK); | 
 | } | 
 |  | 
 | static void at91rm9200_restart(char mode, const char *cmd) | 
 | { | 
 | 	/* | 
 | 	 * Perform a hardware reset with the use of the Watchdog timer. | 
 | 	 */ | 
 | 	at91_st_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1); | 
 | 	at91_st_write(AT91_ST_CR, AT91_ST_WDRST); | 
 | } | 
 |  | 
 | /* -------------------------------------------------------------------- | 
 |  *  AT91RM9200 processor initialization | 
 |  * -------------------------------------------------------------------- */ | 
 | static void __init at91rm9200_map_io(void) | 
 | { | 
 | 	/* Map peripherals */ | 
 | 	at91_init_sram(0, AT91RM9200_SRAM_BASE, AT91RM9200_SRAM_SIZE); | 
 | 	iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); | 
 | } | 
 |  | 
 | static void __init at91rm9200_ioremap_registers(void) | 
 | { | 
 | 	at91rm9200_ioremap_st(AT91RM9200_BASE_ST); | 
 | 	at91_ioremap_ramc(0, AT91RM9200_BASE_MC, 256); | 
 | } | 
 |  | 
 | static void __init at91rm9200_initialize(void) | 
 | { | 
 | 	arm_pm_idle = at91rm9200_idle; | 
 | 	arm_pm_restart = at91rm9200_restart; | 
 | 	at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) | 
 | 			| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) | 
 | 			| (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5) | 
 | 			| (1 << AT91RM9200_ID_IRQ6); | 
 |  | 
 | 	/* Initialize GPIO subsystem */ | 
 | 	at91_gpio_init(at91rm9200_gpio, | 
 | 		cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP); | 
 | } | 
 |  | 
 |  | 
 | /* -------------------------------------------------------------------- | 
 |  *  Interrupt initialization | 
 |  * -------------------------------------------------------------------- */ | 
 |  | 
 | /* | 
 |  * The default interrupt priority levels (0 = lowest, 7 = highest). | 
 |  */ | 
 | static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { | 
 | 	7,	/* Advanced Interrupt Controller (FIQ) */ | 
 | 	7,	/* System Peripherals */ | 
 | 	1,	/* Parallel IO Controller A */ | 
 | 	1,	/* Parallel IO Controller B */ | 
 | 	1,	/* Parallel IO Controller C */ | 
 | 	1,	/* Parallel IO Controller D */ | 
 | 	5,	/* USART 0 */ | 
 | 	5,	/* USART 1 */ | 
 | 	5,	/* USART 2 */ | 
 | 	5,	/* USART 3 */ | 
 | 	0,	/* Multimedia Card Interface */ | 
 | 	2,	/* USB Device Port */ | 
 | 	6,	/* Two-Wire Interface */ | 
 | 	5,	/* Serial Peripheral Interface */ | 
 | 	4,	/* Serial Synchronous Controller 0 */ | 
 | 	4,	/* Serial Synchronous Controller 1 */ | 
 | 	4,	/* Serial Synchronous Controller 2 */ | 
 | 	0,	/* Timer Counter 0 */ | 
 | 	0,	/* Timer Counter 1 */ | 
 | 	0,	/* Timer Counter 2 */ | 
 | 	0,	/* Timer Counter 3 */ | 
 | 	0,	/* Timer Counter 4 */ | 
 | 	0,	/* Timer Counter 5 */ | 
 | 	2,	/* USB Host port */ | 
 | 	3,	/* Ethernet MAC */ | 
 | 	0,	/* Advanced Interrupt Controller (IRQ0) */ | 
 | 	0,	/* Advanced Interrupt Controller (IRQ1) */ | 
 | 	0,	/* Advanced Interrupt Controller (IRQ2) */ | 
 | 	0,	/* Advanced Interrupt Controller (IRQ3) */ | 
 | 	0,	/* Advanced Interrupt Controller (IRQ4) */ | 
 | 	0,	/* Advanced Interrupt Controller (IRQ5) */ | 
 | 	0	/* Advanced Interrupt Controller (IRQ6) */ | 
 | }; | 
 |  | 
 | struct at91_init_soc __initdata at91rm9200_soc = { | 
 | 	.map_io = at91rm9200_map_io, | 
 | 	.default_irq_priority = at91rm9200_default_irq_priority, | 
 | 	.ioremap_registers = at91rm9200_ioremap_registers, | 
 | 	.register_clocks = at91rm9200_register_clocks, | 
 | 	.init = at91rm9200_initialize, | 
 | }; |